I recently got a Lenovo V570 laptop. I was going to do a Clean Install of Win 7 to get the crapware off of the C: drive. I have ran across many threads about when doing a clean install the wifi doesn't work. I have searched for a lot of hours to find the solution and finally have found it but do not quite understand it. V570 - Win 7 Pro (non OEM) - Wireless not working - Lenovo Community Is the OP saying that he put his SSD with the Clean Install under the HDD in the boot order?
I've done a clean install of windows 7 home (Brand new) on my Sony Vaio.But after about 1 or 2 minutes or about 1mb Of data the wireless drops out.If I reboot, wireless and internet come back for the same length of time.My iphone connects perfectly to the router.Have rebooted everything and reconnected carefully in the correct order. Have tried various fixes found on the internet but nothing works.I'm Englishman in Spain and really struggling with this.
When trying to install W7 in 64-bit form I get the error message "The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."
this is new purchased notebook and i can't install the windows 7 anywehere in the driver
[code] I keep getting the error message: "Running out of disk space on Lenovo D Drive" and I don"t know how to free up space. I had a large file: MediaID.bin on this drive, using a lot of space, tried deleting it, it went away but no space was freed up.
Not sure if I've got the right forum so sorry if I've put it in the wrong place, but here goes,I'm running a brand new Lenovo B570 with Windows 7 Home Premium x64 and a Broadcom 802.11n wireless network adaptor.Earlier today I was managing to connect to the internet wirelessly, though the connection kept dropping out. Then I could connect to the wireless router, but not through the internet, and now I can't connect wirelessly at all. With an ethernet cable internet access is fine, and another computer in the house connects fine to the wireless too, so it follows that the problem's with this machine.The computer recognises that the networks are there, but it can't connect.
A couple weeks ago, my computer (Lenovo T500) stopped recognizing wireless networks. I went to update the wireless adapter driver, and saw that there was no wireless adapter shown in the device manager. I downloaded the driver straight from Lenovo, but there's still no adapter showing up.
oh my, you guys aren't going to believe this. I burned 7048 to a dvd disk, went out and bought an external CD drive, did a clean install of 7048 on my laptop, and NOTHING. Still doesn't detect the wireless, This is awful.
are there wireless driver packs I could download or anything and transfer them over to my lenovo?
Update
okay, i did the troubleshooting, and it says
"PCI serial port is not installed. install the latest driver for this device."
i have a problem in my loptap the OS is window 7 ultimate my problem i have no wireless and i go to mobility but the wireless is off before the driver of my lenovo is window istarter i use Fn+F5 to on my wireless but wrightknow i dont have
I'm experiencing an issue with build 7000 and the wireless card. It won't connect to different wireless networks automatically after putting the machine into standby. example, use the corporate network at the office, close the lid, bring the laptop home open the lid (resume from standby) it attempts to reconnect to the corporate wireless and never recovers. i get the same experience when going into standby at the office and returning to the office.
Oh, driver is from Microsoft version 1.0.0.7 date: 11/7/08, manufacture of card indicates: Atheros Communications Inc.
I have recently bought a brand new Lenovo ThinkPad Edge laptop with no OS and I am having a big problem installing Windows 7. When I start the laptop the windows boots and starts loading files but when the "Starting Windows" appears everything stops... I have waited for hours but no progress. I have tried it many times even from a USB flash drive but nothing.
I'm working on a friends PC, a win 7 64 bit on a Lenovo Ideapad model B560. This thing has One Key Recovery installed.. Instead of having factory restore disks this tool recovers the system to factory defaults via a hidden partition that contains the restore data.More info about One Key Recovery here What is OneKey Recovery? - Yahoo! AnswersYou cannot change or resize partitions or One Key Recovery wont work. This PC had malware on it and can't boot into normal windows mode (that's the main problem) .. but it will boot into safe mode. I removed the malware with Malwarebytes but the PC still wont boot in normal mode. I tried to use One key Recovery but it refuses to work in safe mode.
One Key Recovery sets up the PC with 3 separate partitions. A C drive for Windows and pre-installed Lenovo software, a D drive that's large for data and the hidden recovery partition. I don't want to cripple this functionality so I can't do a complete reinstall of windows from a win 7 dvd. I thought I'd use a win 7 dvd to do a repair install instead - hoping this wont mess with the partitions but just fix the windows errors keeping it from booting normally. I'd be using the Win 7 64 bit with service pack 1 integrated from Digital River.I want to know before I try this - will it work? Will it fix the errors without messing with the partitions? If so, perhaps after it's finished, I will then be able to use the One Key Recovery option if I need it. I have to verify this before I try it and mess something up that I can't recover from
tell me if a re-install from a system image file on my notebook is as good as a clean install from say a retail disk.I can not format all my drive and start a fresh. Can my System image file become glitchy or infected with a virus.?
I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
I have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
I originally did the upgrade install of Windows 7 from Vista to Windows 7. I am seeing that I now am running "ChkDsc" every time that my computer is shut down. I was told that I would be better off to do a clean install and reinstall programs and files. Can I do a clean install with my upgrade disc, or will I be creating additional problems ?
I'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz nVidia GeForce 9800 GTX 512 MB PCI-e 320 GB Western Digital HD SATA 1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
I'm finding this decision quite hard to decide on and can't decide what to do. I am very picky about wasted space or unnecessary stuff on my hard drive, yet I'd rather not install everything all over again which will take about 20 hours or so.
My question is...if I do an upgrade-install, can I just delete everything in the Windows.old folder and have everything practically the same as a clean install? Or will there be still be some left over things from the hundreds of programs I've installed and uninstalled?
Edit: I've ran the Windows 7 Upgrade Advisor and everything seems ok.
My 2 year old laptop is starting to get sluggish so I'm wondering if I should try to do a clean install of my Home Premium Windows. Problem is, the computer came with no disks. Also, I'm assuming that the Backup and Restore function that's built in would only give me a copy of my crap-filled hard drive contents if I "made" the backup (to an external disk, presumably) then "restored" it to my freshly formatted internal drive. right? So, can I make my OWN clean disks with some utility on the machine? Or do I have to BUY another copy of Windows 7 Home Premium? Or will Best Buy provide me with one if I take my machine in? Or will Lenovo provide one?
I'm about to buy the Windows 7 Professional Upgrade version. Is it possible to do a clean install from it? (I have a preinstalled Windows 7 Home Premium on my pc). If not, what is the preferred product to do this?
I am currently running build 7600 of Windows 7, I did a clean install without formatting the drive over windows vista premium 64bit and then removed the windows.old folder via the directions found on this board. My question is, that when I download my copy of Windows 7 off of digitalriver (I'm a college student) what is it I need to do in order to have a clean install? I've heard numerous reports that say I wouldn't have to install anything because build 7600 is the final version, and all I would need to do is enter the product key given on my upgrade version.
I've purchased and downloaded the UPGRADE 64-bit version of Windows 7. I have a blank HDD waiting to go into my machine. Am i able to just do a clean install of this straight onto the new HDD, or do i need the full retail version of this?
I'm currently using XP Pro 32-bit on my existing HDD, hence getting a new one in preparation.
i purchased a crucial m4 256gb ssd coming in Wednesday anyways i was wondering how can i make a clean install of windows 7 64 bit on the SSD, i have my HDD backed up but unfortunately i lost my window's 7 cd... what can i do? is there a program i could use to transfer from my HDD to SSD, but with clean install? i have 480gb used on my HDD...
