Language Pack Uninstall/Install & Disk Space?
Aug 14, 2011
I am trying to free space in my HD and I when through the uninstall process of all the additional languages I had initially installed (lpksetup) and after clicking on all the languages I wanted to uninstall the system estiamted that I would recover about 8GB. The uninstall went through fine bu I did NOT recover any space, actually the disk utilization went up by about 3GB after windows removed all the additional languages. Then I decided to re-install all the additional langugae just to see if the free space in the HD would increase by 3GB. Well... the free space went down one more time, now by about 6GB. So my HD has additional 9GB of data on it. I have no idea what to do or what folderm, temp file to delete.BTW I already tried:Disk Clean Up Delete all the temp files in all users in AppDataTemp I turned off hibernation before I started all this process I ran windows washer and delete all the temp, cookies, interenet, etc files My laptop has always been running an AV, Spyware so this is not a Virus or Spyware. I already scanned also with Malware Bytes.Any temp folder I should take a look to delete any additional file(s) that are temp or not needed?
View 1 Replies
ADVERTISEMENT
Sep 8, 2010
I need to install the Windows 7 Icelandic Language pack on some computers.The file is LIP_is-IS-64bit.mlc. which I've got from MS.These files used used to have the prefix MUI -- I'm a bit flummexd on how to install a language pack manually with the *.MLC suffix?
View 3 Replies
View Related
Dec 23, 2010
Is there ANY way to install the whole language pack on Windows 7 HP x64?
View 1 Replies
View Related
Aug 23, 2012
I am using Windows 7 Home Premium SP1 64bit on my Dell. I will be living in Korea and studying Korean, so I need the Korean language pack. I've done a little googling, found a tutorial and followed it. Only to discover that particular file only works on Windows 7 Home Premium RTM.
View 7 Replies
View Related
May 19, 2012
Something on my hard drive is eating up the space even though I un-install applications and then it shows lots of space, but in a few moments that space is gone.
I have run Malwarebytes and deleted a lot of my files that is suspected of Virus/Spyware, yet the same thing happens repeatedly.
What software can I use to ensure I get rid of this 'thing' that is eating away or growing on my hard disk?
View 4 Replies
View Related
Feb 18, 2012
I have a Getac B300 laptop running W7Pro on a single partition. Through a rather bizarre mix of nostalgia and my love for sheer simplicity, I somehow got it into my head that I wanted to run an XP Pro installation on the same machine.
The next station of this (surely flawed ) thought process led me to wonder whether I could do just that with the already existing Windows 7 installation. I got around to shrinking the C: partition, which netted me some 51 gigs of free space that I figured I could use to create a new partition on which to install XPPro. So far, so good.
As you'd expect by now, simply sticking the XP CD into the DVD drive and restarting the machine just won't work: I got the "XP can't see the hard drive" message. So, armed with Google as my friend, I ended up educating myself about how to use nLite to create a copy with integrated iaahci and iastor. Problem is, Having prepared three copies already, after I start the installation sequence and the XP CD installer starts loading files, I'm ending up with the message "the file iastor.sys could not be found," even though I did make sure to include the file that I downloaded from somewhere in the integration process.
So what am I missing here? What am I doing wrong? (I know that the whole concept is "wrong," but there you have it.)
Here are some of the specs of the machine in question:
Getac B300
32-bit W7P SP1
320GB Toshiba MK2555GSX ATA HDD
3GB RAM
ICH8M chipset.
View 7 Replies
View Related
Dec 14, 2011
I want to download the german language pack, which is being offered in windows update.But i want to save and have the installlation file of it, so that after reinstalling windows, will not have to dowanload it again
View 2 Replies
View Related
Nov 23, 2010
I tried to install windows 7 service pack 1 release candidate. it says I have prelease version installed, please install it first. I tried to look for kb976932, and install it. unistall is disabled. I tried uninstall from command line. wusa.exe /uninstall /kb:976932 it says service pack for microsoft windows (KB 976932) is required by your computer and cannot be uninstalled.
View 9 Replies
View Related
Dec 7, 2011
In the list of downloaded & installed updates are Internet9 pt PT Language Pack, TW, CN, FR,& ES Language packs. As I am only using English on my laptop would it be okay to un-installed these Language Packs.
View 2 Replies
View Related
Nov 1, 2011
i am having a problem with installing the english language pack on windows 7 ultimate sp1. it is now in polish since i am polish and the edition i have is called windows 7 ingresso which is basicaly a cut down version of windows 7 with some great programs preinstaled and is also really fast. the thing is i like doing Internet tutorials to some programs and things like that, but can't because windows is in polish...i tried installing the english language pack through windows updates but it gives me an error code 800736b3
View 2 Replies
View Related
Apr 29, 2011
I need to uninstall every update that followed service pack 1, because they have all been causing me problems
View 5 Replies
View Related
May 10, 2012
I may have misunderstood the literature regarding the language packs or language proofing tools. 1st of all I am not sure if they are the different names for the same thing or not. Are they? 2nd I do not in ay way want to change my UI with a different language. All I want to be able to do is -1- let Office not give me those squiggly red lines when I write in a different language -2- be able to spell-check and grammar check in the other language. And since I often use more than one language at the same time (2 to 3) be able to use all of the languages for spell-check etc. at the same time.What I have legally downloaded are 3 files that have such a series of numbers/letters: X16-37717.exe, X16-37707.exe， X16-37690.exe.
View 5 Replies
View Related
Nov 17, 2012
I get error code 8007002 when I install language packs(English). I'm sure installed the English language pack on my computer and switch to English. After reboot my computer it show up original(Chinese language).Than I check my computer is show currently Display:English I try to switch to english again but can't find English language pack in my computer.Than I download it again and reinstall again.during install get a error code
8007002.I have tried the Microsoft suggested solution. (deleting Software Distribution, somthing like that)but still not work.
View 1 Replies
View Related
Jun 3, 2011
After recently downloading the service pack, I've had issues with my computer, including the themes service not working. I want to uninstall the pack so that I can do a system repair using my disc because my disc is older than the service pack. However, the service pack doesn't show up on the programs list. If I try to uninstall by looking at windows update or the command prompt I get an error message that says:
Installer encountered an error: 0x80073712
The component store has been corrupted.
I have already done a sfc file checker thing through the command prompt, and it said that some files were corrupted, and I couldn't access the log (access denied). I'm currently running the 64 bit version of Windows 7 Home Premium. I obtained the log from the sfc scan. [URL]
View 8 Replies
View Related
Nov 10, 2012
I got Windows Ultimate and decided to let it install language packs I don't need (I didnt actually know they'd take a huge amount of space). Part way through the installation I cancel one of the language packs and the whole update finishes (This was a fresh install). Now in the history it says some of the language packs installed successfully but in "control panel>Change Display Language" there is only English.I'm quite sure a few language packs did install because the SSD free space was shrinking after every install.
View 3 Replies
View Related
Feb 7, 2012
The story: My university has their computers set up with multiple input languages, none of which I use. Moreover, NetBeans (which I use frequently) uses the CTRL+Space shortcut for code completion, so I'd like to be able to use it without switching my keyboard to Chinese.
I've made a script that will customize the computer I'm using (because so many settings they use are messed up), so I'm looking for a way to do this in the registry or the command line, rather than the control panel. To make things more interesting, these computers have Deep Freeze on them, so any changes made to them do not stick around after rebooting the machine.
Short version: Does anyone know of a way to disable the CTRL+Space hotkey (or muti-language input in general) via command line or the registry that does not require a reboot?
View 3 Replies
View Related
Oct 5, 2011
I've been getting notifications for Service pack 1 for the last 2 months, so about 2 weeks ago I decided to install the update. The first time of trying it didn't install and after 3 other attempt it still hasn't worked. The update runs and downloads all the components then restarts. As soon as the Laptop goes to boot up it says configuring. It then goes to 10% and stops and aborts. The Laptop restarts again and configures back to default setting and starts normally again with a box saying Service pack installation was unsuccessfully. After a bit of research I found out that I may need to install System Update Readiness Tool. This programme will not install on my pc either for some reason?.
View 12 Replies
View Related
Aug 6, 2011
Removed adobe virus through the virus forum. things operate now but can't install windows update. Other odd things happening; iTunes plays all my songs but when I go to the folder where they are stored, nothing shows up (same for pictures), get signs saying Dell support center has stopped working (same with ATI Graphics center) when I load up computer.
View 2 Replies
View Related
Apr 4, 2011
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3999 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1807 Mb
Hard Drives: C: Total - 292216 MB, Free - 16441 MB; D: Total - 12826 MB, Free - 2145 MB;
Motherboard: Wistron, 3612, 09.66, 2CE9489BJP
Antivirus: None
My computer keeps saying it is running out of room on C drive. I don't feel like I have that much stuff on my computer. And I feel like seeing as it is a relatively new computer I shouldn't be having this problem. is there an easier way to clean out my computer then to go through every file, every picture, every song to decided if I should delete it or not?
View 14 Replies
View Related
Jul 19, 2011
I'm using IE 9 and I am trying to set my "disk space to use" to 50. Every time I close the browser and re-open it it reverts back to 250.
View 8 Replies
View Related
Jan 27, 2010
i downloaded a few themes from microsoft website,but when i try to install them by double clicking them,,it simly doesnt respond
and the default progrma for .themempack file is "Windows Shell Common Dll" but i want to install these themepack so badly
View 9 Replies
View Related
Jan 26, 2012
I never realized it until just now, when I looked through Windows Update. It's been trying to install the service pack update about a hundred times behind my back since LAST JULY. and every time the status is "Failed."
I had checked because I just installed it last night again and shut down my computerr and everything seemed fine. Then this morning I noticed the windows update icon in the taskbar and saw it again even though I just installed it last night and noticed all the failed installations
View 5 Replies
View Related
Aug 10, 2011
I get Error Code: 0x800f0826.
View 6 Replies
View Related
Aug 26, 2011
I have a PC running windows 7 64-bit and I am finding it impossible to get windows 7 Service Pack 1 (SP1) to install. I start the installation and it seems to run for more than an hour and appears to be installing OK; but when I restart the PC I get an error saying that the installation was not successful and it the rolls back to where it was before I started the installation. I have tried to install a numbr of times, but without success.I have also tried:
* Stopping all non-essential start-up items by disabling them booting on startup using msconfig.
* Stopped all firewall and anti-virus from running during installation
* Run the Windows Update System Readiness Tool (kb947821) before the installation
* Run the Windows Update troubleshooter
* Running the installer from within Windows Update, as a standalone x-64 bit installed downloaded from Microsoft, and as an iso file burned to a DVD
* Run sfc.exe /scannow which reported no errors.
Other Windows Updates seem to install OK - it is just the SP1 update that refuses.[For info: I have another PC that I recently updated (clean install) from XP to Windows 7. I had a similar problem on this PC after I had performed all the other Windows Updates and instaleld my normal suite of programs. SP1 also refused to install. In the end, I reistaleld Win 7 from disc and then immediately installed SP1 before installing any other updates or programs. SP1 installed OK. However I do not want to follow this route on my main PC as it has a load of programs installed which will take a few days to reinstall if I have to start from scratch].
View 6 Replies
View Related
Nov 9, 2009
i see a lot of drivers pack for win 7, is it neccessery to have a driver cd installed with win 7, or it's enough if i have the drivers for my hardware as win 7 compatible, so is there any need for that extra drivers package cds if i have the right installer drivers?
View 7 Replies
View Related
Nov 11, 2011
I am Still Finding Out how to Show my IDE Hard Disk (Samsung SP0842N)But when I start the Setup, It Redirect to the Load Driver.What Should I Do to Install Windows 7 from my IDE DVD-ROM to IDE HDD?
View 6 Replies
View Related
May 29, 2012
im needing to install k-lite codec pack in order to play most files. im not sure which one to install, i have an old thread on vista forums but was reluctant to follow them instructions now that im running 7 and 64 bit versus vista 32, is there a diff? sorry will post new specs now that i am a new member to 7 forums.
View 8 Replies
View Related
Sep 14, 2011
I was updating neighbors PC last night and when I tried to install the windows 7 service pack from windows update at the end of the install it would say it failed then when I rebooted the pc it would say configuring windows and when it reached 32% it would stall and then say it was removing updates and reverting, then it would reboot, do the same thing, reboot and do that cycle like 6 times before windows would actually load up like normal. It happens if I download the .exe version or I try to get it from windows update.
Its a dell pc (forgot the model but its newer has a core i7 860 in it). Has windows 7 ultimate 32bit on it.
View 2 Replies
View Related
Mar 9, 2012
Is it possible to install the service pack on a laptop without having it plugged in?I have tried the stand alone update and thru windows update. Keeps saying to plug in my power cord.
View 5 Replies
View Related
Jan 21, 2012
I've been having trouble with Oblivion for awhile now and wanted to reinstall. The game used to run fine, but recently the disc was having trouble being read and now will not register with my computer at all. This issue is unique to my computer (the disc works fine for others) and my other games are running in top shape.
What's more, I cannot uninstall the game from my computer using the prompt in the loading menu, as I get an error message saying "Oblivion Launcher cannot find the uninstall program. Run Setup.exe on the install disc to uninstall." The Add/Remove programs in my control panel does nothing, though I can still run uninstallation of the official added content (Orrery, Vile Lair, etc.).
I am currently running no mods on Oblivion. I planned to use Revo Uninstaller Pro, but my free 30 days has run out and I can't afford the program. How does one uninstall a program that cannot be uninstalled using a disc that cannot be read?
View 5 Replies
View Related
Mar 9, 2011
I tried to install a .exe file (in order to support ArchiCad 12) onto my laptop (Gateway NV79). I get a message saying "Out of Disk Space -Volue 'D:'". It should be installing onto the C: drive. My D: drive is my cd/dvd drive.
View 1 Replies
View Related
