LG HBS-250 Bluetooth Audio Headphones Problem - Constant Stopping
Sep 15, 2009
I'm using Windows 7 RC, and I just bought LG HBS-250 stereo Bluetooth headset. And I'm using kensington bluetooth dongle with windows 7 basic driver. My bluetooth hasn't given me any problem with syncing to my BlackBerry.
Now I want to use my headset to listen to music through audio streaming from my PC. First of all, the headset works perfectly with my BlackBerry.
But when I try to listen to music from PC, the music constantly stops just like I'm listening to streaming music with bad connection. (Buffering)
Funny thing is, when the headset is connected to BOTH BlackBerry and PC, then the music from PC plays flawlessly.
What should I do to correct this problem? I don't want to keep my BlackBerry's bluetooth on just for this .
View 1 Replies
ADVERTISEMENT
Jan 14, 2013
I guess I should start by saying I'm running Windows 7 Ultimate x86.I got a pair of LG HBS700 Bluetooth Headphones for Christmas and couldn't wait to pair them up to my Windows 7 Home Theater PC so I could watch movies after my wife has gone to bed w/o disturbing her.My first problem was I had no bluetooth adapter for the HTPC so I went and purchased a Targus Bluetooth 4.0 Bluetooth Adapter.Thought I had it all squared away. I installed the latest drivers for the Bluetooth Adapter I had purchased and was on my merry way.Went to the control panel, choose to add a bluetooth device after putting the headset in pairing mode and much to my dismay, Windows 7 can't seem to find the headset... I know the head set works because I'm able to pair it with my cell phone.
View 4 Replies
View Related
Jun 5, 2011
I have Bluetooth headphones that I have been using with my desktop Windows 7 machine successfully for about one year. Now all the sudden without my having changed anything, I get no sound out of them.When I turn them on, Windows recognizes them and shows that they are connected, but when I play audio, the sound comes out of my desk speakers and not the headphones.The headphones work correctly with my laptop.
View 3 Replies
View Related
Feb 4, 2009
Ok, so after I connect my bluetooth headphones to the computer and start listening to music they cut out and stop working after about 10 or so seconds. Any ideas where i should go with this?
View 1 Replies
View Related
Jul 24, 2011
I have a pair of wireless bluetooth headphones (Sony DR-BT22) and it won't stay connected to my computer. I used to turn it on and it would connect automatically I could listen to my music and everything was fine. Now my headphones won't connect automatically I have to go to my bluetooth click on the device and click connect for them to connect. Not only that but if I close the page that has the connect/disconnect options it will automatically disconnect and i have to reopen the device page and click connect again to get it to work
View 1 Replies
View Related
Oct 2, 2012
I have tried many times to get my Bluetooth Headphones to work with Windows Media Center without any luck. I use Media Center to watch Cable TV through a Cable Card Receiver box. The BT headphones pair and is listed in Devices and Printers. I can see it in playback devices and click test. The bar indicated that there is sound going to the headphones, but I don't hear anything. I even had a guy from The Geek Squad give me some help, but had the same results. Are we doing something wrong or does this in fact not work with Media Center?
View 3 Replies
View Related
Nov 9, 2009
I have recently switched from XP - 32 bit to Windows7 64 bit Home Premium via an upgrade license.
When I did the “upgrade” I chose to format the hard drive before installing Windows 7. When I performed the upgrade, I had my Creative X-Fi Extreme Music in my board’s only PCI slot. (Check my profile for my rigs specs). Once I started playing audio files, I noticed popping and clicking. I remember reading that X-Fi cards are famous for this so instead of fighting it, I just decided to uninstall the card and use the Onboard sound (Realtek AC97).
I uninstalled all the Creative software and when I uninstalled the hardware through device manager, I select the option to remove the driver. I rebooted, and enabled my onboard sound. I downloaded the most up to date audio drivers from Gigabyte (my motherboard OEM) and installed said drivers. I immediately noticed the same popping and clicking.
This surprised me so I looked at possibly flashing my motherboard BIOS. Upon reading the notes for what they changed to the BIOS, none of the updates sounded like they could have anything to do with my issue. Those notes are below:
1. Improve VGA card compatibility
2. Improve S3 resume compatibility
3. Intel®Core™ i7 processor D-0 stepping support.
4. Enhance Core i7 D0 stepping compatibility
5. Fix abnormal messages from EasyTune 6 and DES in Vista
6. Update new CPU microcode
I did not flash the motherboard BIOS. Instead I decided to try one of my recording sound cards. This one being an external USB sound card. A Line6 Toneport UX-2. I had the SAME clicking issue but since this soundcard has the ability to change the buffer memory, I gave that a try. I extended the buffer all the way to 4096MB. This seemed to help, but now the audio only clicked once every 10 seconds instead of every 5.
I did some digging and someone said that X-Fi cards click because the memory of the machine exceeds 4gig. I brought up MSCONFIG, changed the usable memory to 4gig. I uninstalled my Line 6, and downloaded Driver Cleaner to clean out the Creative and the Realtek drivers, booted into safe mode, deleted the registry keys and remaining drivers for the X-Fi manually. Shutdown, reinstalled the X-Fi and have the same clicking and popping.
I am now at a loss and throw myself before you to help. Let me know if there is something I am missing and thanks again for taking the time to read this book. I just want to be thorough so you knew what I had tried.
View 2 Replies
View Related
Nov 11, 2009
I didn't have this problem on vista - The volume is turned up to the max but only a very tiny amount of volume, as shown by the green bar, comes out (I have the volume of the application, in this case a game, turned up to 100%). Can anyone help me fix this?
View 2 Replies
View Related
Dec 25, 2011
These are the bluetooth headphones - Creative 51EF0450AA001 WP-300 Wireless Headphones: [URL]: Electronics
I bought a cheap USB bluetooth dongle to enable my PC to connect to my bluetooth devices and these headphones don't work. My PC pairs fine with my phone so I don't think anything is wrong with the USB. It discovers the headphones when I try to add a bluetooth devices and recognises them as headphones but when I go to add the device I get this error: "Adding the device failed resulting in an unknown error. The reported error code is:0x80004005." I've had a look and I've read a few things about Windows 7 not supporting A2DP but I don't really understand what to do about it.
View 3 Replies
View Related
May 23, 2012
The speakers of my laptop are working properly but when i use headphones then it doesn't work. I checked the playback devices but headsets/headphones are not in the list, there is only speakers.
View 2 Replies
View Related
Nov 9, 2012
For some reason when I plug my headphones into the front audio jack in my computer the sound output of running applications is not moved to my headphones. The audio remains with my speakers. The converse is true too - unplugging my headphones will not transfer audio output that is on my headphones to my speakersI had run into this problem when I was originally setting up my computer and I had been able to fix it.All I had to do is set my headphones to my default sound output and the computer would switch everything when I plugged them in. My headphones are still the default audio source, but for some reason the switching no longer works.
View 1 Replies
View Related
Feb 7, 2013
I know there's similar topics to this here, but none of them have the same kind of problem. I have 3 jacks, so I can get audio output from 2 sources, and audio input from another. My problem is, when I plug in both my headphones and speakers, I get all the audio output from my computer from them both at the same time. I want to just get the audio from my Steam voice chat on the headphones and the audio from my game from my speakers, as I am fond of making videos with FRAPS and don't want the voice recorded. I know it is possible to split the audio, but when I go to my playback devices in my sound options, all that's there is speakers, no headphones. It would appear that my headphones and speakers both register as speakers at the same time. I am running Windows 7 Home Premium.
View 15 Replies
View Related
Dec 26, 2011
I managed to get audio being played through both Speakers and Headphones, but i need to be able to play a video on gomplayer and listen to it's audio only through the headphones but at the same time play wmp music only on the speakers.
View 4 Replies
View Related
Nov 3, 2012
problem while playing the audio files(like mp3, wav...etc) with front panel headphones, the sound interrupting continuously (like 10 seconds sound-1 second mute-12 second sound-1 s mute-5 s sound-1 s mute) but there is no problem while playing video files. I opened the mixer from taskbar audio icon and saw the headphones device goes and comes cyclically while playing audio files.
View 5 Replies
View Related
Feb 24, 2012
[code] So I bought a new computer not too long ago and I've had some issues with my headset and whatnot. I have a ASUS Xonar DX sound card with an optic fibre cable for my Logitech Z-5500 system and they worked just fine with it.However, when I bought my headset (Steelseries 7H Fnatic, normal non-USB) I had issues. When I plugged them into my motherboard it couldn't find them. And when I tried to plug them into my Xonar card, people I was skyping with could hear my sounds (videos I watched etc) even though I had earplugs. So I removed the card and decided I'd go with the normal drivers etc. So I checked ASUS website and got the drivers.I installed the drivers (Xonar drivers uninstalled clean before) and it asks me to reboot. I reboot and I get the message: "No speakers or headphones are plugged in." from the system tray. I run dxdiag and no sound card is detected (it's just empty where there should be driver names etc). In the control panel there is no Realtek option etc. When I check the folder it only has 2 folders:Drivers and InstallShield. They contain files named RtlUpd64 (application), USetup.iss and the InstallShield contains Rtkupd64 (application).
I uninstalled/reinstalled and rebooted etc several times but I never get it in the control panel or the system tray. BIOS etc are the lastest for my motherboard, and I never had this issue before. In BIOS the settings are to HD audio. I'm pretty sure I haven't screwed up the assembly of the computer, because I've been building my own for a very long time. In the control panel I can currently see "Digital Audio (HDMI)" 2 through 5 (2,3,4,5) and they're not plugged in it says. On recording there is nothing.
View 2 Replies
View Related
Feb 14, 2013
I have a Gateway model MD2614U laptop os Windows 7 home 32bit. When I unplug the headphones to use the internal speakers sometimes the laptop will switch over and sometimes it won't. When it won't switch over. I open the volumes control window and I can see the green bar going up and down with the audio source but there is no sound coming out. I have to end up closing down the program that is producing the sound then the switch over will complete and I restart the program. I also have the same problem when I plug the headphones back in, again no sound from the headphones even though I see the green bar moving. Also some programs that send and receive audio over the internet will lock up when I unplug or plug in ether the headphones and or the microphone.
View 1 Replies
View Related
Oct 13, 2011
I recently went into my computer to install a Corsair H80 Water pump for the GPU. Anyhow, after i connected all the cables and turned on the computer again i did not have any sound. Even though im not an expert with computers, i'm pretty sure all the cables are connected right (but there is always a possibility i screwed up there).I do have sound devices, that is not the issue. After the first pc boot i had the Realtek digital output (realtek high definition audio) as the sound device. I went into the control panel and pressed sound. The previous audio device (that i had and was working) was there, but stated as "Not plugged in".So, my computer does not detect or react as i connect any headsets nor speakers. I also checked the audio in the mixer to see that it "plays sound" which i can confirm.I have searched the web for people with the same issues and tried a few "solutions" but none of them worked for me.They were:
1. Uninstall and reinstalling the drivers
2. Making sure i got the latest versions of the drivers
3. Turning on the front jack panel in the Realtek HD Audio Manager, which resulted with the speakers apparing to be connected and works according to the computer but still no sound.
4. Tried different speakers and headphones.
After trying several things im starting to believe it might be me who failed at connecting the computer. But if so i have no idea how to fix it, as it does not matter if i connect the audio cable instead of the HD audio cable or if i leave them unconnected.My os is Windows 7 Ultimate.I got an Intel motherbord DX58SO and my sound device/card is Realtek high definition audio?
View 9 Replies
View Related
Aug 28, 2012
I just bought a pc, windows 7 32bit. I tried to use my headphones but couldnt hear any sound, also tried speakers still no sounds. The green bar goes up on the volume control tho. I have tried downloading some drivers, but they didnt work.
theres some audio ports at the back of the pc and at the front. both dont work.
View 4 Replies
View Related
Dec 4, 2012
I have just purchased a pair of bluetooth speakers (sandstrom) and a belkin Bluetooth dongle.I've paired the speakers to my pc, but I can't get the audio to stream through the Bluetooth speakers and the speakers currently attached to my pc via a hdmi cable to a surround system?
View 1 Replies
View Related
Nov 14, 2009
I have an HP Pavilion DV6700. I am trying to get my Motorola S9 bluetooth headset to play audio. I just installed Windows 7 and the bluetooth drivers won't support audio. It pairs with the headset, but can't find the drivers for the headset. I told it to troubleshoot the problem and it sent me to this link: Broadcom.com - Bluetooth Software Download
I tried to install that driver, but the installation stopped very early giving me a message saying it can't update my bluetooth device. All of my internet searching always leads me back to this being the only solution that is supposed to work.
Has anyone found another way to get audio bluetooth support for windows 7?
View 1 Replies
View Related
Sep 9, 2010
I have a BLUEETOOTH dongle attached to each of my 3 systems. I use BLUETOOTH as my default audio device The sound quality is great.(Far better than that of a laptop.) I have a BLUETOOTH reciever attached to my stereo system, used for streaming PANDORA radio. I also have several other portable BLUETOOTH recievers, one of which I like to use outside on the deck. Why is it that WINDOWS 7 only allows 1 audio device to be used at a time. I would like to stream audio to multiple BLUETOOTH devices, but WINDOWS 7 does not allow that. When right clicking on the speaker icon to bring up "playback devices", only one device is allowed to be set as default! Also, if I want to pair with a second device, a pop up window tells me that I must first disconnect the device that is already paired, before I can pair a different device.
View 2 Replies
View Related
Oct 13, 2012
I have Lenovo Y410 Laptop when I power on the system Audio and Bluetooth doesnot work but when I the system sleep , after waking everything works
View 4 Replies
View Related
Nov 8, 2009
I'm doing some audio work, editing drums, which involves taking a few audio files (7 or 8) and splitting them into hundreds, one for each drum beat.
My problem is that when I do this, my computer completely locks up. I've noticed that as soon as I do this, Windows 7's RAM Cache jumps up to 1.7gb. And I've only got 2gb of RAM, so it leaves only 300mb for my audio program to run, and I think this is the problem.
Is there a way to temporarily or permanently disable Windows 7's ability to cache your RAM? Because it doesn't seem to be disabling when I want it to.
I'm running the Windows 7 RC Build 7100 atm, with an Intel Core2Duo (2ghz) and 2GB of ram.
View 3 Replies
View Related
Mar 26, 2012
I was having trouble with the printer spooler stopping, finally got it fixed after 4 stressful days, went to Administrative tools, print management and deleted the print jobs that were waiting to be printed and it worked. you may have to go to services and restart your printer spooler first before it will recognize your printer.
View 1 Replies
View Related
May 29, 2009
I am trying to install Windows 7 RC into to different machines. Both are self built machines. Both are running Win XP w/ sp2.
On one machine I have tried everything to get past a CD/DVD Driver request. The first DVD driver is a NEC ND-2500A. I found what I thought were the drivers, but whenever I get to the point of selecting the drive (with the drivers in it) they don't appear within the DVD drive.
I even went as far as to load the driver onto the HDD I am installing Win& to. After may attempts, with no luck, I installed a plug and play CD/DVD player. Now, I have never had driver's for this unit, but it still wants drivers for it.
What am I missing here? Why won't it get past this point. I have even gone as far as disconnecting C drive and tried loading directly to D drive (second HDD drive).
On the second computer it mentions something about an I/O shield problem and wont even let me get into the setup stage.
View 8 Replies
View Related
Apr 1, 2010
I have a laptop running Win 7 32-bit. I configured a network printer, which is an HP Deskjet 720 that is connected to an XP machine and shared. That worked fine. But I just purchased a new 64-bit desktop, and I can't print to that network printer. I can install the printer, and the status shows it's available/ready. But when I try to print a test page, nothing happens. When I check the document status, I get a message saying that the print spooler needs to be started. I've restarted it several times, but it still doesn't work. I've searched the forum and Googled this problem. Lots of users seem to have this same issue. I've tried all suggestions, but nothing works. The spooler is set to automatically start, and the restart time after error is zero. I decided that I'd try replacing the printer driver. But when I go into Control Panel and look at printer properties, the Advanced tab where I should be able to update the drive is all grayed out. So I'm stuck.
View 9 Replies
View Related
Dec 21, 2009
I'm running Win 7 Ultimate x64 on a desktop with the OS loaded on an Intel 160GB G2 SSD as C:. I've noticed that Defrag is happening on the SSD drive. I've confirmed this in two ways: First, looking at the Last Run date in the Disk Defragmenter UI. The date associated with the SSD drive C: continues to move forward. Second, I've looked in the event log and have confirmed that there are messages stating the successful defragmentation on the C: drive.
I have 3 drives in my system. The SSD drive is C:. I have 2 WD 750GB drives as D: and E:. If I look at the Defragmentation Schedule UI, only drive D: and E: appear. Just to be safe I turned off Scheduled Defragmentation and Defragmentation has stopped on D: and E: but continues on C:.
Looking at the event log, there seems to be no discernable pattern as to when the defrag happens on the SSD:
I can't find any place to stop Defragmentation from happening on C:. Any suggestions?
View 9 Replies
View Related
Jan 15, 2012
Verizon will not let me log in. When I type in user name and password, it comes up that I have used a wrong procedure. I'm typing the correct items in their boxes.
View 1 Replies
View Related
Aug 20, 2012
Am using Hp Probook 4720s with window 7 32bit OS. A couple of days ago i shut the cover of my laptop while updates are being installed and since i cant get to start the window. it keep stopping and starting in circles. I have done system recovery several times and sometimes it gives an access denied to message "c:windowssystem32configsystemprofileDesktop is not accessible" messgaes. i can not access my files to do any work.
View 2 Replies
View Related
Dec 31, 2011
how to stop the print size from changing when I click on a link within a web page? At the moment I have a 150% print size but that changes to a very small 100% when I open a new link. This happens nearly every time I click on a link or open a new webpage. How can I prevent this from happening at all?
View 5 Replies
View Related
Feb 11, 2012
the comp stops at random points it happens in all os's xp, vista and 7 i have tryed everything i can think off the on;y stange thing is that when in safe mode it works perfectly fine but as soon go onto the normal mode it hangs for 2 to 20 mins at a time. there is no mouse or keyborad movement and no movement on the screen at all. no networked devices or drives. brand new instalation on the os's, full delete, partition and format.
View 9 Replies
View Related
