Keyboard No Power During Windows Resume Loader?
Aug 10, 2012
Desktop was sleeping. Woke up this morning to windows resume loader. No time out on this menu for some extremely idiotic reason. USB keyboard has no power. Tried with a USB to PS/2 adapter and still no power. Tried another keyboard, didn't work neither. There's power on my USB rails for sure as I have tried plugging in headphones and they work. Can't even get into BIOS because keyboard just doesn't work. Currently resetting my BIOS.
View 2 Replies
ADVERTISEMENT
Apr 10, 2012
My key board is locked. I cant use my usb mouse. All I get on start up is the last attemp to resume the system frome its previous location failed. Attempt to resume again? continue with system resume or delete restoration data and proceed to system boot menu on a black screen.
View 1 Replies
View Related
Feb 9, 2013
I have done some looking around and have found lots of mentions of the same issue but people tend to skip through some of the in between key steps as they are working on their own computers and not trying to do this blind.
I had no idea at first what she'd done but apparently this is a common problem. Basically, if a netbook's battery goes dead while it is hibernating then it creates a problem when the user reboots. The machine gets to the windows resume loader page and then freezes there. It offers you a choice but the keyboard is unresponsive. I got her to force quit and restart but same thing.
I found that many were able to use a PS2 keyboard to work around this but my mom does not have one. She doesn't have a start up disc or anything like that.
I found this solution elsewhere but as you see, the guy skips the key steps: Hopefully your computer gives you the opportunity to visit you bios settings/ peripherals. You can usually access this at the very beginning of startup by following the prompts such as "F1, F9, DEL, TAB, "....etc. I am pretty sure that each Motherboard has a different setup. Once I found My way to the peripherals I was able to scroll down to "USB keyboard" and saw that it was disabled. I enabled it, saved those settings and continued on to the "RESUME LOADER" page that had not been responsive before and Ta-Da!!!! it worked.
So, I need the easiest, most explainable steps to follow so I can walk my mom through them. It is the f8 key you press upon startup to get to get to safemode? Or does this guy mean to actually press F1 then F9 and so on?
manually enable the keyboard on her netbook and get past this.
View 3 Replies
View Related
Oct 24, 2009
Everytime my PC loads it gets stuck on the Windows Resume Loader page. It's gives me two options to select, "continue with system resume" or "delete restoration data and proceed to system boot menu". Problem is there is no keyboard response so I can't select either option. The keyboard is working fine as I can acess the boot menu and other options.
View 9 Replies
View Related
Jun 11, 2012
HP stuck on Windows resume loader. Tried 'restart' many time with same results.
View 2 Replies
View Related
Jun 1, 2011
My battery died and my computer always freezes at the "Windows Resume Loader" I have no way to bypass this god da** screen. If I can't get past this, how the hell will I retrieve my files? I don't want to lose everything.
View 5 Replies
View Related
May 31, 2011
Today my desktop windows 7 32bit PC failed to load and has frozen at windows resume loader option page. I cannot select either of the options available as my KB will not select or move between the two options offered. I have entered BIOS where my KB works fine to look for USB options but there are none available on my system. My mobo is an abit KV-7 running phoenix BIOS.
View 1 Replies
View Related
Nov 8, 2012
I live outside US, which means, a power outage from time to time is normal, but when that happens in the middle of a crucial moment is very stressful. I went to the BIOS and turned on the option Restart After Power Failure, though it wasn't what I was looking for. Is there a way to set my Windows 7 to resume my last session (all the programs I was using) after power failure ?
View 4 Replies
View Related
Apr 8, 2012
Have a Windows 7 PC working fine for 6 months, now fails to resume from sleep every time. On attempting to resume the PC appears to go through a powering up loop (Hard disk and fan spin up) which then goes off and repeats indefinitely till you force the power off by holding town power button.When changing 'allow hybrid sleep' in Power Settings to disable; it cured it for a few days. The issue came back, so tried enabling this setting - same result. Disabled again, same result.Update Intel Graphics Drivers to latest. Fixed the issue again, just for a few days.
View 1 Replies
View Related
Sep 4, 2012
I have Win7 on my desktop PC, and sometimes when I start up the computer, it won't have any internet access. On more rare occasions, it will do the same thing when I resume from Sleep. Windows usually solves the problem by itself, but it that takes about a minute or so.
I know it's not the modem or the router, becuz other computers on my wi-fi network can access the internet even when the main PC can't. I did a search and found a few things about reinstalling Office 2010 or disabling IPv6, but that doesn't work for some people. Those posts are also 3-4yrs old, so it seems like there should have been patches
View 5 Replies
View Related
Feb 3, 2011
I made my Windows 7 64-bit laptop my new desktop.I put all the peripherals to the laptop; monitor,keyboard, speakers,etc, etc.Everything works fine.I am able to restart & shut down the laptop from the added monitor(start menu), however, I'm not able to power it back on from a complete shut down from the 2nd keyboard. I have read
there is a way to do this. Right now, I must go into the laptop and toggle the on/off key.My question, is there a way to add a turn-on key(power on) to the 2nd keyboard?And if so, which key would be most appropriate for this?
View 4 Replies
View Related
Oct 17, 2012
I'm running Windows 7 Home Premium SP 1 64-bit on a HP 620 (just a year old).
Lately, whenever I return to the laptop having left it alone for some time (Power Management set to 'Sleep' after 10 mins), and try to resume, I can hear the it resuming (fans etc.), however, the screen remains completely black.
The only solution is to shut down the system manually and boot it up again.
View 1 Replies
View Related
Nov 2, 2012
i have installing the win7 home premium, after installing when i run system loader for win 7 my system is restarting again and again.. without running loader i have not that problem..
View 2 Replies
View Related
Jan 24, 2011
I have an HP pavilion dv4-1555dx laptop that I was trying to install Linux mint 10 gnome on a PNY 8GB flash drive, I forgot to have Linux install grub to the flash drive, so it ended up installing grub to the HDD, now I need to reinstall the windows 7 boot loader but HP didn't send a windows 7 boot disk with the system (OEM windows 7) so I can't jut boot the cd and use the recovery counsel unless there is somewhere online that I can get an iso from, or is there another way?
View 2 Replies
View Related
May 5, 2011
Can I do this? Isn't the W7 loader on the XP partition?,XP is on partition 1, and W7 is on partition 2.
View 11 Replies
View Related
May 31, 2009
Windows 7 won't show on boot loader ? How do I make it show on my Boot loader menu at start up?
View 3 Replies
View Related
Nov 1, 2012
I have a laptop which until yesterday was dual boot (Windows 7 and SLES11). However I decided I would rather just use Windows with VMWare for any Linux needs. To do this I deleted the Linux partitions (OS, workspace, swap) from within Windows and used this extra space to add to my workspace partition on Windows and create a new partition for my VM's to sit.I got all this working very nicely and was happy with it until I rebooted to machine to see GRUB was still set to be the boot loader which is unable to do anything with no Linux partitions.What I do have is the Windows 7 Reinstallation DVD that came with the laptop however the DVD drive of my laptop is broken. I am currently writing this with a MacBook Pro (Mountain Lion) and so the only solution I can think of is using media oN DVD, and burning this to a bootable USB using the Mac and then setting up BIOS on the 'broken' laptop to boot from DVD. However I am not sure how to create a 'bootable' USB.
1) Can I use my Windows 7 reinstallation disc to recover Windows boot manager
2) If so can I do this via USB?
3) How could I make my USB 'bootable' using my Macbook Pro
4) What are the steps for recovering boot manager from the installation media
5) What is the more elegant way to 'delete' Linux partitions and ensure Windows Boot Manager works (I may also run into this problem with a workstation I set up in same way yesterday but have yet to reboot0
View 2 Replies
View Related
Nov 25, 2012
I am trying to activate my system using Windows Loader. I have Windows 7 Ultimate on a Toshiba system. I need the serial number that can used for this type of software.
View 8 Replies
View Related
Nov 11, 2011
I have a PC with 2 hard drives- the first hard drive has a single partition and windows 7 64-bit is installed on this hard disk.Now I wish to install CentOS 6 on the first partition of the second hard disk.I have created the dvd for installing Cent OS also.How do I configure the boot loader in Windows? If I install Linux on second hard disk, will this overwrite the Windows Boot Loader? How do I create a dual boot system so that the windows boot loader correctly shows linux as an option, so that I am able to load either Windows 7 (existing) or Linux(on second hard disk- not yet installed)
View 2 Replies
View Related
Feb 21, 2013
My computer wont resume with windows resume loader. Anytime i start the computer from a shutdown or hibernation/sleep it gives me the option of continue with system resume or delete restoration data and proceed to system boot menu. If i click continue with resume it gives a black screen with this "_" in the upper left corner and never loads. It doesn't let me go back to what i was doing upon using hibernate, sleep, or anything that would save what i was doing.
View 2 Replies
View Related
Jan 23, 2011
simply put every time my computer is on hibernate i get the BSOD when i resume windows, if i choose resume windows normally it works fine as if nothing happened, I've searched online, and lots of threads and forums say that i should locate and upload my dump files or folder and so on, i have windows 7 64x, but i can't seem to find any dump, no folder and no .dmp files either also tried *.dmp i got a few Mozilla dumps but that's it, even used SF Diagnostic Tool, and it says no dumps found?
View 9 Replies
View Related
Dec 5, 2010
I have a problem with hibernate/sleep in windows 7.when i set pc to hibernate or sleep, the power turn off, but it does not resume. I press any key on keyboard, power does not come back on, then i push power button, power on and display not windows unexpected shutdown screen, choose safe mode or start windows normally, no blue screen or crash dump. I tried all kinds of settings. still same.
View 9 Replies
View Related
Oct 4, 2012
I tried hitting the on off button. Says windows is resuming but nothing happens and screen goes black. Hear fans come on. Last night I had recovered a Word Document Office 2010 and not saved it. Son logged off and recovery file was created last night.Was able to get on this morning and recoved the document, but never saved or named it. I may have closed the laptop lid. Not sure if that makes laptop go into sleep mode or hybernate.F2 setup and F12 reboot are available options when the Resuming window come up. Then that disappears and screen is blank. Makes sounds like it will come up but it doesn't.Saw an earlier post that said: If its trying to resume then it should give you an option to either
1) Continue w/ system resume, or
2) Delete restoration data and proceed to system boot
Try option 2.If you are not given this choice, restart the computer manually and start hitting F8 about once a second until you get to a selection screen. Choose to start windows normally and let us know how it goes.I tried hitting F8 and nothing happens. Then I saw another post that said to hit F12 and run the diagnostics... that is what I am doing now. It is in the prediagnostics now and said the next test is 30 minutes. All tests were passed and it is doing memory checks. Other post said it ran all night.Do you need to go through all the diagnostics to be able to use F8?Or will I need to turn the computer off and on again and see the resuming screen and then hit F8?
View 1 Replies
View Related
Nov 3, 2012
I built my own system quite sometime ago and unfortunately I don't know much programming and I have ran into troubles... I tripped a circuit breaker in my house and my computer shut down but now when I turn it on I get the windows failed to load message.... I am using windows 7 just to give an idea and the message says "the last attempt to resume the system from its previous location failed. attempt to resume again? Under that it says continue with system resume or delete restoration data and proceed to system boot menu. I have tried the first option and it says resuming windows then goes to a blinking
View 4 Replies
View Related
Oct 9, 2010
what is a boot loader?
View 1 Replies
View Related
Mar 4, 2012
I am trying to dual boot windows XP & win. 7 on one hard drive after 7 is already installed... I created a separate partition on my c: drive and then put in the XP setup disk & restarted. Install went fine, I formatted the new partition to ntfs, but now my PC will only boot up XP. The OS loader never comes up & when I pull up my system properties in XP control panel, it doesn't show any other OS in the dual boot dropdown box.
View 1 Replies
View Related
Jan 13, 2013
my laptop dell inspirion windows 7 n5110 64bit is not starting..when i am switching on it repeatedly showing dell logo and not moving to the windows page.
View 1 Replies
View Related
Nov 3, 2011
I just bought a new ultrabook and I love its SSD and instant-resume. What I don't love, is that it instantly resumes to the login screen. I have only a single user account, with no password associated with it, and yet I'm still unable to find a way for my computer to skip the login screen when I lift the lid of my notebook after the machine has suspended. Other posts say how to do it to skip the login on first booting the system (netplwiz), or how avoid entering sleep / hibernate modes, but neither of those options are quite what I'm looking for
View 3 Replies
View Related
Jan 13, 2013
Win 7 home premium,4 GB RamApparently the computer resumes from sleep but really it freezes and no input from the keys or mouse are valid---at this point only option is to reboot.
View 4 Replies
View Related
Feb 6, 2011
Every time I put my computer to sleep or hibernate and wake it up, the computer resumes to a screen stating "Windows failed to shut down correctly" A recent hardware or software change might be the cause and I'm asked to choose how to restart.Quite similar to the screen I would get after a crash.
View 2 Replies
View Related
Apr 25, 2011
My laptop (Dell Vostro V13) is stuck in some kind of limbo. It went into sleep mode and won't wake up fully! It "resumes" the boot-up sequence right up until the four windows colors do their characteristic swirl animation - then the screen goes black.I can't seem to force a fresh restart b/c every time I power off and back on, the laptop tries to *resume* and gets stuck again.Hitting F2 and F12 allows me to run bios and memory tests, but to no avail. The laptop always attempts a resume.How do I break this sleep-resume cycle and do a fresh restart? Reinstalling the OS is out of the question (too many important files will be erased
View 5 Replies
View Related
