is there a way to backup my programs and settings and such so that I can restore them after a clean install? I've been having some problems with Windows 7, so I'm just going to start fresh. I don't want to be too fresh though =P I have a SSD and a HDD, so I'll be backing them up to the HDD.
View 2 Replies
System SpecsDell Studio 540Intel Q8200Windows 7 64bit Ultimate Edition Retail (came with Vista) I feel kind of dumb not knowing this but here we go. I consider myself very knowledgeable about computers but I'm not sure if there is a utility for what I want to do. My parents computer is having some issues I replaced the hard drive and i used Acronis True Image to copy the hard drive so they wouldn't have to redo all there bookmarks and personal info for there websites and just the general windows settings like wallpaper etc. So since i have done this something just isn't quite right something must of been corrupted from the old hard drive. So anyways I am gonna do a clean install and i was wondering if there is a utility that will allow me to save everyones profiles so that i can just pop in a disk and restore all the settings. I am not worried about any files or programs on the computer I have them all backed up my only concern is windows settings themselves.I just can't figure out how to do this if there even is a way to backup everyones profile settings.
View 8 Replies View RelatedPaul Thurrott (Windows 7 Secrets) recommends a clean install on a Vista system. Since I have a HP dv9000 Pavilion Entertainment Laptop Computer, it is capabable of running Windows 7. I have ordered the upgrade version of Windows 7 Professional (since I have Windows Vista Business).
My concern is that with a clean installation, I will lose the installed HP programs that came with the laptop (HP Connect, HP Advisor, etc.). What is the best way of getting those programs. HP technical support was absolutely of no help.
I have win xp and want to upgrade to Win 7 x64.I know this requires a clean install.My question is, if I have programs loaded on other drives, can I reestablish paths to those programs via Win 7 without having to reinstall the programs? I understand that any programs on the same drive as the OS will need to be reloaded.
View 1 Replies View RelatedI've just done a clean install on a blank hard drive of windows 7 ultimate x64. I had this exact version of windows on another hard drive but I did something and now I can't boot into it any more. So I want to transfer all my files and stuff - I can link up and view everything on my old hard drive, it just won't boot - is there any software or any easy way to transfer my program files so that I don't have to reinstall them all? Also, I'm not sure how to transfer all my windows settings - is it just a file somewhere that I copy across? I've had a look at 'windows easy transfer' but it looks like it only works if you can boot into both operating systems - which I can't.
View 8 Replies View Relatedso i custom/clean installed windows 7 ultimate from usb, formatted through the windows installer, and deleted all pervious partitions. i then installed windows.windows created two partitiions one primary and one "for backup drivers" a total of 100mb. for some reason though it still shows me all my previous programs?like microsoft office 2007, wich actually is disabling my office 2010.hat i want to do is totally clear the hard drive so that i really only have windows 7 ultimate on it. similiar i guess to task 29ing my old htc touch pro
View 4 Replies View RelatedIm running windows 7 premium,im getting another pc running windows ultimate,is there a way i can transfer all my programs over with there plug-ins installed and all the settings etc rather than install them all again one by one?
View 6 Replies View RelatedI think it may be a security policy setting on the PC. The issue is that I had to change some settings because we access a UNIX server for our old ERP, a Windows Server2008 for our new ERP, and use Windows Server2003s for our VPN, File and Domain controllers. For workstations we have a mix of XP, and Win7 machines. The only computers having issues are the Win7 machines. We use Dell Vostro 460's, doubt the stats are really necessary. But they run Win7 Professional 64-bit.So I had to flip the following settings to communicate with the UNIX server:Network security: LAN Manager authentication level = Send NTLMv2 responses onlyNetwork security: Mininum session security for NTLM SSP Based (both on the client and server) = No minimum (from 128-bit default)Network security: Restrict NTLM: Add remote server exceptions for NTLM authentication = I input the domain IP addresses and server nameNetwork security: Restrict NTLM: Add server exceptions in this domain = I input the domain IP addresses and server name
The only other system changes I made were dropping the User Account Control Settings to the second to the lowest setting (Notify me only when programs try to make changes to my computer...) because the constant pop ups are annoying. I also set the network user login as an administrator on their local computers when I set up their accounts on their computers.A few different scenarios play out:
1. When one of my employees is trying to access a network file (excel), she is unable to. The program will launch, but the file cannot be opened from her workstation. IN the lower right hand corner of the Excel window I will see the progress bar move, then it does nothing. The program will hang and has to be force closed. This file is on a shared drive on a Win2003 server (completely open to all domain users.)
2. When trying to save an IE9 file, the user is not able to change their target location, and when they do, it freezes IE9.
3. When trying to attach a file to an e-mail, the users are not able to browse their computers to find the files they want to attach.
i accidentally switched my default setting for opening all programs to 'windows photo viewer', but the programs are not opening now because of this. what is the default setting of windows for opening all the programs, and how do i restore it to the original settings.?
View 2 Replies View RelatedI did an update and got a BSOD. Message said "Check disc"' After completion, all my programs and settings are lost. I have done Acronis backups, but they are gone. I tried to do a restore, but only date it gives is today's. Can I use the Windows 7 disc to do a repair or will I have to do a complete re-install? Also, after screen came back, I kept getting a "Windows Validation Failed" even though I clicked Validate online and it said "Validation complete".
View 14 Replies View RelatedI have a few portable programs on my computer. How do I update them without losing any settings etc. that I have changed? Do I move ".ini files" and/or ".cfg files" and/or "whatever" out of the old version of the program and into the new?
View 4 Replies View RelatedI currently have an HP Pavillion G70 that has some broken hardware (hinges for screen) but other wise works fine. It's running Windows 7, Ultimate - 32 bit.
I'd like to buy a used version of the same PC model and simply swap the hard drive from mine into the purchased PC.
Will this retain all the programs, settings and files? Or are there some things that are tied to the motherboard or other hardware devices.
I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies View Relatedtell me if a re-install from a system image file on my notebook is as good as a clean install from say a retail disk.I can not format all my drive and start a fresh. Can my System image file become glitchy or infected with a virus.?
View 5 Replies View RelatedI'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
View 3 Replies View RelatedSo over the past few days it seems that I have lost control of my C drive and all of its contents.I can no longer properly access it, and everything opens in "Read-Only". I can no longer install programs or modify existing programs.According to the security permissions, I have none. Nor can I change my permissions because in order to change them I need access to the C drive, which I don't have.I have tried creating other users and putting them in the admin group, etc. but nothing is working.
View 2 Replies View RelatedI have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
View 9 Replies View RelatedI have just bought a new acer aspier 5750z-4830 intel core b940 processor 4gb ddr3 memory 500 gb hdd 3 days ago and I am unable to install any new programs.I have tried to download meny sotwer not at the same time but the results are horrable.google chrome: 7 hours and never downloads. yahoo mesenger: connection is always lost and retrys never work. when i click cancle it says that it maybe my firewall but even when i allow the progrom through it won't work. so i turned if off for a little while still nothing. java: my laptop dose not come with java so i tried instlling it...121 hours to install this is rediclious.The download speed may not be so good right now beacuse we where hit by a storm 3 days ago however i have to ability to downlod but not the ability to install which i think is a bit weird
View 3 Replies View RelatedI originally did the upgrade install of Windows 7 from Vista to Windows 7. I am seeing that I now am running "ChkDsc" every time that my computer is shut down. I was told that I would be better off to do a clean install and reinstall programs and files. Can I do a clean install with my upgrade disc, or will I be creating additional problems ?
View 5 Replies View RelatedI'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz
nVidia GeForce 9800 GTX 512 MB PCI-e
320 GB Western Digital HD SATA
1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
I'm finding this decision quite hard to decide on and can't decide what to do. I am very picky about wasted space or unnecessary stuff on my hard drive, yet I'd rather not install everything all over again which will take about 20 hours or so.
My question is...if I do an upgrade-install, can I just delete everything in the Windows.old folder and have everything practically the same as a clean install? Or will there be still be some left over things from the hundreds of programs I've installed and uninstalled?
Edit: I've ran the Windows 7 Upgrade Advisor and everything seems ok.
When I go to Control PanelAll Control Panel ItemsNotification Area Icons dialog then there are a lot of programs which are already uninstalled.
How can I cleanup/delete all these useless entries? How can I delete ONE single entry manually?
Second question: Assume I want to hide icons and notification for mutiple/all entries (here approx 40 items) in ONE STEP.
Third question: How can I save/backup the current notification settings (for later restore) into a file? Are these notifcation settings stored in a certain branch of the Registry (which exactly) ?
My 2 year old laptop is starting to get sluggish so I'm wondering if I should try to do a clean install of my Home Premium Windows. Problem is, the computer came with no disks. Also, I'm assuming that the Backup and Restore function that's built in would only give me a copy of my crap-filled hard drive contents if I "made" the backup (to an external disk, presumably) then "restored" it to my freshly formatted internal drive. right? So, can I make my OWN clean disks with some utility on the machine? Or do I have to BUY another copy of Windows 7 Home Premium? Or will Best Buy provide me with one if I take my machine in? Or will Lenovo provide one?
View 3 Replies View RelatedI'm about to buy the Windows 7 Professional Upgrade version. Is it possible to do a clean install from it? (I have a preinstalled Windows 7 Home Premium on my pc). If not, what is the preferred product to do this?
View 9 Replies View RelatedI am currently running build 7600 of Windows 7, I did a clean install without formatting the drive over windows vista premium 64bit and then removed the windows.old folder via the directions found on this board. My question is, that when I download my copy of Windows 7 off of digitalriver (I'm a college student) what is it I need to do in order to have a clean install? I've heard numerous reports that say I wouldn't have to install anything because build 7600 is the final version, and all I would need to do is enter the product key given on my upgrade version.
View 9 Replies View RelatedI've purchased and downloaded the UPGRADE 64-bit version of Windows 7. I have a blank HDD waiting to go into my machine. Am i able to just do a clean install of this straight onto the new HDD, or do i need the full retail version of this?
I'm currently using XP Pro 32-bit on my existing HDD, hence getting a new one in preparation.
i purchased a crucial m4 256gb ssd coming in Wednesday anyways i was wondering how can i make a clean install of windows 7 64 bit on the SSD, i have my HDD backed up but unfortunately i lost my window's 7 cd... what can i do? is there a program i could use to transfer from my HDD to SSD, but with clean install? i have 480gb used on my HDD...
View 2 Replies View RelatedIs there anyway (at all) that I can convert my version of windows 32bit and all my software to 64 bit without doing a clean install?
View 3 Replies View Relatedi've had enough of 7, I use my PC for music and after months of installing/uninstalling/re installing/researching/driver checking etc. i've decided i'm just not going to get things working with 7.
I have my XP disc and i'm ready to do a clean install, but i'm struggling to get it going... what do I do!? Inserting the XP disc brings up the autopay but the option to install is greyed out, which I understand as it's a step down. However, when I press f12 on booting to try to boot my pc from disc it just locks on the boot menu. What can I do to get a clean install of XP going?
I have been having numerous problems over the past wk. The firewall won't stay on, can't do windows updates etc. I have run Vipre as my anti virus and also mbam and superantispyware and everything is coming back clean. Today I decided to just backup my documents etc and then do a clean install. Now the problem is that the DVD burner doesn't show up in the BIOS. It shows up in my computer and it's running fine. If I format it out of the computer can I get windows to install from that DVD drive?
View 2 Replies View Related
