doing routine vaio check just got message Intel turbo boost technology driver won't start i've tried updating it won't do it.btw i am a novice with pcs on the properties notice it will not let me roll back either.
I built a new PC lastnight with a Gigabyte GA-Z68XP-UD4 motherboard and installed Windows 7 64-bit (or so I thought). Everything was working fine.I then installed the drivers for the chipset, integrated graphics etc from the disk that came with the motherboard. After restarting, Windows started to boot (got past the animation) and then got stuck on a black screen.I booted it in safe mode, and went to add/remove programs to start uninstalling the new drivers, and accidentally uninstalled something called Intel Control Center by inadvertently hitting a key.I thought I may as well try restarting and it booted into Windows fine. At this stage, I realized I had accidentally installed the 32-bit version of Windows, so did a fresh install as 64-bit.
This time, I got the latest Intel drivers for the integrated graphics from the Gigabyte site and installed only them. Restarted and it worked fine.This morning I turned on the PC and seemed to be working fine, changed the location of the pagefile and rebooted and it got stuck at the same place, just before opening Windows. I booted it in safe mode again, and removed the Intel drivers and rebooted and it opened Windows.I am at a bit of a loss as what to do now, because I need the Intel drivers to get the right HD resolution and am not sure what else I can try, or why it seemed to work okay sometimes but not at others.
I bought a new laptop now and I am not so well with the technology it says: Intel Corporation driver update for Intel(R) Management Engine Interface so what do I need to do now?
i changed the OS of my laptop from windows7 starter to windows ultimate x64. but i cant connect my laptop to the internet. some drivers are missing. {2 BASE SYSTEM DEVICE DRIVER missing, ETHERNET CONTROLLER DRIVER missing, NETWORK CONTROLLER and VIDEO CONTROLLER DRIVER is also missing.} solve this?i tried to install the ethermet driver i downloaded. but it always shows this error " error:failed to install, no device driver is present to your computer"
I have an Acer Aspire 7741z-4433 with an Intel(R) Pentium(R) p6200 (2.13 GHz, 3MB 1.3 cache). This only happens to me while I am playing The Sims 3. I have the game set on the lowest quality settings, even though my laptop "claims" to be HD LED, etc. This issue still happens. As you may know I cannot replace the graphics card as it is apart of the motherboard, and to buy a new motherboard with a better graphics card would cost more than a new computer. I have been the my manufacture's website and tried installing an update of the graphics card, and that didn't do the trick either. I am at my wits end, and I just want to play the game without it shutting down and freezing my computer. The reason I know the error is because I do Alt + Tab to get back to the desktop. The way it acts up while I am in game is the screen blacks out but I can still see the software's mouse, and then it blinks a couple times and then freezes completely?
So ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
I recently installed a WD 500GB Scorpio Black (Sata II).
I am using a Advent 9117, running Windows 7 32-bit. The drives works fine but was just wondering if i need to install the Intel Rapid Storage Manager/ Intel Matrix Storage Manager program and driver. Will i gain any benefits from doing so? Or is the Windows 7 driver currently installed for the hard-drive fine?
I dont use RAID array, but want to use and enable all the features on the harddrive like AHCI etc. Is this already enabled and used with the current Windows 7 driver?
Dont use Intel ethernet drivers if your adapter is working, Intel has still outdated 8.3.1.5 drivers on their page, stick with Windows 7 drivers for now 8.4.1.0.
i installed windows 7 build 7100 RC 32bit build on a desktop. Its a custom build pc so i don't have much info about it. I ran Intel chipset identification and go this:
I need to download the chipset driver. Can anyone help me please?
I have a standard vga graphics driver and it won't let me play a lot of games like WoW and etc. I have a Mobile Intel(R) 4 Series Express Family Chipset I have tried to download the correct driver I need but all it does is load for like 10 minutes then it says Unknown error has occurred then it closes.
When I download the driver off the website it says it supports my chipset but when I look at the read me file that tells you what kind of chipset you need to install the driver mine isn't supported.
A new Intel driver for GMA 500 graphics has been released for the Sony Vaio P with noticeable improvements in video viewing, Aero performance (enables 3D acceleration) and web browsing. I have been advised that it Works only under Vista and Windows 7, no XP.
Apparently you have to install under Windows 7, use compatibility mode and select Vista as OS. Can someone please guide me on how to install using compatibility mode ?
does anyone know where to get a windows 7 extreme pci driver for a gateway gm5632e with an intel g33 chipset. windows says it can't find a driver for my pci simple communications controler and i cant use my pci slot for my sound card and my on board sound card won't work so i have no sound at all.
May I know can I disable Intel® Turbo Boost Technology Monitor & Intel® Management Engine Components or not? If I disable both of them will cause any bad effect?
I've been getting this warning now for a few months and just can't seem to be able to find out how to fix this or get rid of the warning in my Event Viewer. I own a Acer 8943g Notebook running Windows 7 x64/4gb RAM/Core i5 430M processor. My drivers all seem to be up to date. The services are running and I'm just at a loss.I'm an above average user so I'm not lost when it comes to troubleshooting, but this problem seems to have a lot of different solutions and I can't seem to pin one down, so hopefully I've come to the right place.
Every 5-10 minutes my screen turns black, sort of flashes a bit, and then comes back on in different colours and the windows are all different sizes, but then it changes a bit and goes back to normal. Then I get a balloon message from the task bar saying "Display driver Intel Graphics Accelerator Driver for Windows Vista® stopped responding and has successfully recovered." (screenshot below) For some reason it says "for Windows Vista® but I am on Windows 7. When it has come back to normal again, Chrome goes all funny and the tabs won't switch. So if I try to switch tabs, the top thing is on the tab that I have switched to, but the main screen below stays on what the previous tab was. Also, sometimes the tab becomes unresponsive and I have to either restart Chrome or refresh the tab.
I know Intel isn't supporting the old Intel Play QX3 microscope. Does anybody know if someone created a driver for the microscope that will work with Windows 7-64 bit.
I have bought an older notebook - HP Compaq nx6110 with PCMCIA WiFi card and want to replace it with Intel® PRO/Wireless 2200BG card. I have installed Windows 7 on it and put the Intel card into miniPCI slot, the problem is no driver works for me. I would be happy, if you could help me, really do not know, what to do with that.
I've been having problems updating my Intel Graphics Media Accelerator driver, 8.15.10.2119. It is the version that prevents Win 7 SP1 from showing up in WU. I read a thread about this very issue from 2011, but the link provided to go to Intel to get the latest driver leads to nowhere. I cannot find a place to go to update the driver. I manually downloaded SP1 and installed it and it is working fine. My question is: do I still need to update the driver, and if so, where do I get it from? Neither HP nor Intel is any help here. And would this driver cause IE9 to crash? The computer came with IE8 on it, but I installed IE9 in Nov. 2011. Shortly after, I was getting a message like "Internet Explorer has stopped working". I uninstalled IE9 and went back to IE8, but I had the same problem there as well. IE8 worked fine until I upgraded to IE9. Then I uninstalled IE8 and changed to IE9, where I still have problems. I have contacted MS Support about this, and one option given was to reformat the hard drive, which I really don't want to do. They were concerned about the fact that SP1 was not offered and hinted that the computer would be more vulnerable to problems without it installed. My firewall and anti-virus have turned up nothing. I use Trend Micro Titanium Internet Security.