So I was thinking, can I install Windows 7 OEM on a hard drive more than once? I'm thinking of changing the essential components (CPU, Graphics Card, Motherboard) but keeping the hard drive the same - I understand that Windows 7 installation ties the activation code to the current hardware configuration.
View 6 RepliesI have a network of about 90 computers connected together and i am currently running server 2003. Now when i go to network place on my xp machine, i am able to see all of my computers that are connected together. But when i go to network place on my window 7 machine, i am only seeing some of my window 7 computers and not the xp computers. The network discovery is turned on, on all of my window 7 and still nothing.
View 4 Replies View RelatedI have two HP laptops. One came with Win 7 Pro while the other has home edition. Is it possible to install the pro version on both the machines with the same installation disk.
I think since I own both the laptops and their respective OS, I might try to do that. The main reason is one has a clean installation disk while the other has OS image with all the bundled HP bloatwares which I dont want to go thru.
Network printer and two wired XP machines not discovered by new Win7 laptop. System says I'm in "workgroup". My XP machines see the laptop in "network places", but laptop with Win7 does not see the XP machines or an ip/ipp network printer. I can print to the printer if I plug on hard wire ethernet, but can not print if I unplug. Still can not see either XP computer or Printer.
View 1 Replies View RelatedI've recently installed some windows 7 machines on our network and they don't seem to be getting valid network configs. It sees the correct DHCP info and DNS servers and you can ping the gateway and other computers on the same subnet but when you try to ping other subnets or out to Google it won't go.
You can see local computers on the same subnetwork and even view webpages on the server on the subnet but everything else network wise outside of the subnet doesn't work.
We have a subnet firewall and it is set to allow everything on the trust side out on any port to any computer. I've even made a rule that let everything in from the outside (untrust) on every port to these windows 7 machines and they still don't get an identifiable network.
My windows XP machines work perfectly though.
Has anyone else seen this?
I have file and printer sharing enabled. I can access these shares from other windows 7 machines on the network, so I know the shares and permissions are correct. I have an active directory and I am logging onto the xp machines with the same account I always do, my own account which is a domain admin. The error I get when trying either \windows7machinename or windows7machinenamesharename iswindows7machinename is not accessible. you might not have permissions.the specified server cannot perform the requested operation.
View 9 Replies View RelatedI recently started a subscription with Comcast for a 50mb Down/10 mb Up high speed internet service.I am using 3 different websites to analyze the download speed of this connection on multiple computers (speedtest.comcast.net, speedtest.net, speakeasy.net/speedtest).The issue is, the 50mb download speed works for some of my machines but not for others.The following machines receive the full 50mb (or higher) download speeds when checking with the above sites: [code] When I try this with my other Windows 7 machines, I get results of less than 10mb down. These machines are: [code] These tests were conducted with direct hard line hookup to the modem, no router.I know for a fact that the service is working at full capacity, since I get the full download/upload speeds with the 3 machines. But I cannot figure out why the other two are more than 80% slower.All of the firewall settings are identical across the Windows 7 machines. I tried starting my my ASUS machine in safemode, to see if some particular process was slowing things down, but the slower internet speeds remained.I was hoping that someone might have some idea what is causing this, or maybe some idea of what to compare between the two machines. While I am fairly computer-savvy, I don't know a lot about networking.
View 5 Replies View Related1. my machine is a Getac B300 with a Windows XP Professional 32-bit/Windows 7 Professional 64-bit dual boot.
2. My wife's machine is a Toshiba U500 with Windows 7 Professioanl 64-bit.
Normally, I use the U500 as a hub: I connect it to the internet using a 3G-enabled Sony Ericsson Elm that I control through Sony Ericsson PC Suite 6.011.00* (I have an unlimited connectivity plan.) As soon as the U500 is connected, I set up a WEP-encrypted ad hoc network and connect my B300 (regardless of which system I happen to be booted into) and my wife's iPhone.** I can do the same if I choose to boot into Windows 7 on my B300 and use that as the hub.My question however, is as to why I can't get this whole setup to work out with Windows XP. I normally use the exact same way to connect to the internet (Elm and SE PC Suite), and I've attempted to set up an ad hoc network when I'm booted into Windows XP (through Windows and through Intel Proset), and I even managed to get the U500 and my wife's iPhone to connect to the network, but neither machine would get any internet access, even though I made sure to turn on Internet Connection Sharing for the connection.So I'm beginning to wonder if it's even possible to get it to work with XP (as opposed to 7) being the hub.
I have installed windows 7 7100 X86 on my machine. (got my own key)
Lent the RC disk to someone else who got their own key, but installed with my key...
Both activated fine and updated.
Could this cause issues later?
I have a home network with 7 or 8 XP machines. All are on the same workgroup. All share EVERYTHING. All have passwords. All are logged in with an ADMINISTRATOR account. All can see each other on the network. They all talk to each other just fine. All the GUEST accounts are turned ON.I loaded Windows 7 on a machine, and turned on sharing for drive C: I gave everyone ALL permissions. I also went into the Network and Sharing Center. I had no idea what a "HomeGroup" was, so I went a few more menus deep and found the Workgroup setting. I set that up with the name of my workgroup.From the Windows 7 machine, I can see all the XP machines on the network, and they can see the Windows 7 machine. But when I try to view anything (drive C: , for example), I get the "you might not have permission to view this network resource....". I get the same thing when I try to log on to the Windows 7 machine from the XP machines.Since I can't log on to my XP machines, I also can't connect to, and use the printers attached to them.I basically want a big, open, flat network. No security at all between machines. What do I need to do?
View 9 Replies View RelatedI have used ghost before to image XP PCs over the network, but have yet to try either Windows 7 or an OEM Operating System (xp was an enterprise license).
My Qs: Is it legit to ghost OEM PCs? I have 60+ new PCs, with OEM Windows 7. I was thinking that I could take one PC, set it up the software etc then push the image. I would then change the license key to the one on the box.
Is this correct? If all the systems are the same, do I need to sysprep? I have heard horror stories of system preping Windows 7 -
So I have a network with 3 computers, a readynas, and multiple network printers.
Two machines have 64 bit RC 1, one has XP.
XP machine can see both Seven machines, and NAS.
64 bit machine one can see everything as well.
64 bit machine two could see everything when I did the first install of RC. I reinstalled to fix some boot manager issues, and now it cannot see the XP machine, nor the NAS from windows explorer. I can connect to the readynas through it's IP address in a browser no problem, I have full internet and networking between it and the first 64 bit machine.
No homegroup is set up on either seven machine. The network is set to Home. Drivers are installed for the Ethernet properly, latest drivers.
I looked through settings and everything seems to be gravy. What am I missing. Nothing changed between the two installs except 18 hours of time.
I have 2 machines MACHINE1 and MACHINE2 running Windows 7 Ultimate x64 and am trying to map to the D: drive from MACHINE1 machine on to MACHINE2. I enter \MACHINE1D$ as the drive address but then it tells me access is denied. The account name and password is the same on both machines (no domain here) and I have tried specifying MACHINE1Qu0ll as the user name but it still won't let me map the drive.
Curiously I can see the D: drive when I double click on MACHINE1 in Network but I cannot write to it without "Access denied" messages again.
I have 4 machines on a work network. All machines are Windows 7 Pro 64bit. Password sharing is on. All computers have only 1 user account you can locally log in from.
Sharing used to work perfectly by entering the username/password of the computer you were trying to access. I did not need to have the same local username/password on all.
Now on one of the computers I enabled the Guest account and I can no longer access it from the network. All other computers work fine.
I have Quicken 2000 Deluxe on my computer when using XP; I had a new HD put in and installed a new Windows 7; Can I install my Quicken 2000 Deluxe
View 1 Replies View RelatedI have VPN service running on my Linksys DD-WRT router at home, so I can VPN back into my home network when using unsecured wireless internet on travel. I also have remote desktop port forwarding to my home machine if I want to just remote desktop in without using the VPN. However, often times I will VPN in, then remote desktop to my machine. Lately, I can VPN in, but can't see any other machines on the network so remote desktop to the machine's 192.168.x.x address on the local network doesn't work. I used to be able to do this and I'm not sure what has changed. The home machine runs Windows 7 and the laptop I use on the road for VPN'ing back in runs Windows XP. why after I VPN in to the home network I can't see any other machines on the network anymore? I have a folder shared on the home machine that I'd like to map to my laptop once I've VPN'ed in but can't do that either since it can't see the machine.
I've got all the sharing options enabled on the Windows 7 machine as well as the XP machine. Network discovery is turned on as well. No clue what has happened with this. The DHCP pool is 192.168.1.2-150 and the VPN pool consists of only 2 addresses of 192.168.1.160 and 192.168.1.161.
I am running the 7100 RC Build and when I go to network it shows all my machines. One of these is a media streamer (HDX 1000). I can access all machines by double clicking on them however when I do that with the HDX it times out and says HDX is inaccessible.
I am using "home" network but not joined a homegroup. Network discovery is on. File sharing on. Contrlled by username and password NOT by homegroup.
I also think I have it set to send LT and NTLM ntlm v2 is applicable in the local security policies. The windows 7 machine has a static ip set.
I should also not I can ftp into the HDX and I can ping it and get replies. UNC path in explorer bar does not work either nor can I map any of the shared folders on it.
Any ideas?
I have a desktop and a laptop. The desktop specs are listed on my System Specs. Some remotely related laptop specs: [code] Both are running Windows 7 Ultimate x64, dual booted with Kubuntu Linux x64. Would it be possible to have a single VM running on both machines such that its guest OS thinks it is running on an 8-core, 16-threaded CPU? (Both PCs are connected to the same LAN)
View 1 Replies View RelatedI have a 32 bit dongle that won't run on the new 64 bit machines.
View 1 Replies View RelatedI have installed Microsoft Virtual PC in my new sony viao windows 7 computer. Then, I installed XP computer, vista computer and windows 2003 server computer in my MICROSOFT VIRTUAL PC. Now, I want to connect 3 computer in network. so that I can ping each computer with other. I also want to control things in xp and vista computers using windows 2003 computer.
View 2 Replies View RelatedI am running XP home on one machine and Win 7 RC1 64bit on second. If I try to access the win 7 machine folders from the XP machine, both machines freeze. Any suggestions?
View 3 Replies View RelatedOn my laptop Windows 7 (64bit) I have 3 possibilities of starting my Google Chrome default search machine: 1. Quick Web access button, 2. Google icon on my Desktop, or 3. Google icon in bottom tool bar.No problem until a week ago, when I think downloading a a file from a Polish site changed everything!
[code]...
How can I remove these unwanted search machines? I can't find them in the programs boblalux has chosen the best answer to his/her question.Click here to view the answer that was selected.
I have a classroom that we need to log in as a local admin (the exam software needs administrator privelidges to work correctly) and I was wondering if anyone could come up with a solution to save me having to go to each machine and log them in indevidually.
View 3 Replies View RelatedI see a lot of questions on drivers and devices for Virtual machines. (Hyper-V, VMware, "XP mode", Virtual PC, etc)
Its important to understand that the devices the virtual machines see are not the actual hardware in the machine.
That is to say...the virtual machine might know that there is a network card available to use, but it doesn't know that the physical network card is a Broadcom 3c905 (for example). The virtual machine thinks that it is a pre-defined device that is written specifically for use in the virtual machine.
Same goes with other hardware, your Nvidia 9800 GTX would show up in the VM as a totally different piece of hardware. And this virtual piece of hardware does not have the features or power of the 9800 GTX nor does it require its device drivers.
Virtual machines use 2 types of devices. Emulated and Synthetic.
Emulated - Drivers/Devices that require a lot of physical box overhead to process for the virtual machine. Basically there is a lot of translation that the hypervisor (virtual pc, hyper-v, etc) must perform for the virtual device to utilize the physical device. These are the types of devices/drivers you will see used in Virtual PC and MS Virtual Server 2005 and some others.
Synthetic - Virtual Devices/Drivers that are highly optimized to perform very seamlessly with the underlying physical device. Hypervisor intervention/translation is kept minimal and therefore performance is greatly improved. Virtual machines using synthetic drivers are often said to be "enlightened". These are generally seen in bare metal hypervisors like Hyper-V and ESXi.
The important thing to take away from this post is that the actual physical devices in your computer are NOT what the virtual machine sees.
The network traffic from your virtual machine is passing through the physical network card, but the virtual machine will "see" a totally different device than what is actually in the computer. This goes for any device.
I want the name and prices of new commercial printing machines, cutting machines and binding machines.
View 1 Replies View RelatedI use mainly Winamp for audio and VLC for video.
I have music that I've played on my XP machine transferred onto my Windows 7 Machine, and it won't play on the Windows 7 machine. To my knowledge Winamp and VLC both should have flac playback.
I have a simple home network running several machines with Windows 7.
My "server" is running Windows 7 Pro x32. This machine is connected via wired internet directly to my wireless router. When I run a java speed-test web app, I am seeing speeds between 1 and 4 Mb/sec. (My connection is ~20Mb).
I have a Windows 7 Pro x32 laptop connected via wireless. This laptop gets 17Mb/sec speeds.
When I connect the laptop via a wire to the router, it's still upwards of 15Mb/sec.
This was not always the case with this hardware. I have tried shutting down any non-essential services. I have tried running the speed test in Safe Mode +Networking. I ran a live linux CD and got fast speeds.
7 put up a network wizard as soon as I started the machine and I answered questions as best I could. I had trouble renaming the work-group but think I've done that ok and was connected to the Internet immediately, but wouldn't argue if you told me I had created a problem somewhere along here.
Our setup is:
Desktop running XP, which is connected to the wireless router by cable
Laptop running Vista
Laptop running 7
The problem is mainly on the (new) 7 laptop. When I go to network, only the Vista laptop appears above the line (not even the 7 laptop itself!) and below the line are media devices with the name of the 7 laptop and the name of the XP desktop.
When viewing the network map I see the 7 laptop connected by solid lines to a large question mark named "Unknown", which is in turn connected by solid lines to the router, which is connected by solid lines to the Internet. The Vista laptop is connected by broken lines to the router.
The XP desktop has no trouble seeing both laptops and the Vista laptop has no trouble seeing the 7 laptop and the XP desktop. The problem is only with the 7 laptop not being able to see the XP desktop.
I have 3 Virtual Machines on my 2TB drive, but it's close to full already and most of them are right at the end of the disk, where the drive is slowest. This doesn't make for an overly enjoyable experience when in use so, if possible, I'd like to move the VMs to the start of the drive in an effort to speed them up somewhat.I've got Auslogics Disk Defrag Professional, which allows for system files to be moved to the start of the drive, but I can't see an option for moving files of my choosing.Getting another drive and copying files across isn't an option either, as I don't have one to hand.
View 6 Replies View RelatedI have a suspicion this isn't even remotely possible.but I'm interested in this concept, so I'd love enlightenment from the knowledgeable elite that frequent this forum.I'm interested in running multiple monitors, let's say 6, but having a second machine power 3 of them. Now with software like Synergy or Input Director, all you really get is a network-based peripheral seamless sharing effect.What I would like to do is to run a single monitor surface over multiple machines. i.e. it would be like slaving the second machine's graphics cards to power extra displays, but the data for said displays would be fed to the master machine.
View 4 Replies View RelatedI work in an architecture office using Quickbooks to track hours, expenses, billing, etc. The company QB files reside on the server in a shared directory that is mapped as drive Z: on all machines through a domain logon script that runs when each person logs on to their machine. The company file runs in multi-user mode so that everyone can access the file and enter their hours at the same time.The problem is that if anyone happens to leave Quickbooks open at night, the server backup process (running BackupExec) will skip the files that are in use, usually either 2 or 3 files. This is potentially bad news because if anything happened to the server the following day after those files were skipped, we would not have the file from the night before to restore, which could potentially mean lots of information lost (sometimes lots of info is entered in one day, especially on "billing" days).Sometimes people will leave in the afternoon for a meeting, thinking they'll be back later and leave their programs open. But then the meeting ends up running long and they don't come back until the next day. That's usually why Quickbooks ends up getting left open on a machine overnight.What I'm wondering is if there's a way to make the program automatically close, if it's open on any machine, perhaps just before the backup process starts on the server. Or, make the program close if the computer has been idle a certain amount of time.Is there any way to make this happen? All machines in our office that have Quickbooks on it run Windows 7, except for one machine that still runs XP.
View 8 Replies View Related