Cant Access All Networked Machines
May 11, 2009
I am running the 7100 RC Build and when I go to network it shows all my machines. One of these is a media streamer (HDX 1000). I can access all machines by double clicking on them however when I do that with the HDX it times out and says HDX is inaccessible.
I am using "home" network but not joined a homegroup. Network discovery is on. File sharing on. Contrlled by username and password NOT by homegroup.
I also think I have it set to send LT and NTLM ntlm v2 is applicable in the local security policies. The windows 7 machine has a static ip set.
I should also not I can ftp into the HDX and I can ping it and get replies. UNC path in explorer bar does not work either nor can I map any of the shared folders on it.
Any ideas?
View 5 Replies
ADVERTISEMENT
Aug 25, 2009
I am running XP home on one machine and Win 7 RC1 64bit on second. If I try to access the win 7 machine folders from the XP machine, both machines freeze. Any suggestions?
View 3 Replies
View Related
Nov 11, 2011
I have two Windows 7-64 computers on ethernet. The other computer has four physical hard drives, one partition each, C, D, E & F, all shared, and with "Everyone" given full access on the Security settings.i can write files from my computer to that computer's drives C, E & F with no problem, but whenever I try to write a file to that computer's D drive, I get a popup window titled "Destination Folder Access Denied", with an error stating, "You need permission to perform this action". (I get analogous messages if I try to delete a folder, etc.)I can read from that drive fine, and I can transfer files to it using UltraVNC.I've gone through all the sharing and security properties of that drive, and I believe they're all identical to the other drives that cause no problems when I write to them.
View 1 Replies
View Related
May 10, 2009
I have upgraded my vista home premium to Win 7. I now cannot access the Xp computers on my home network but I can access my other Vista computers ok. I can ping all by ip and name ok. But file access just comes up with error 0x80070035 'the network path was not found'. All the computers can access the Windows 7 computer and read files ok.
All the computers are on the same workgroup, Nothing been changed on any other computer as it all worked before this upgrade! Tried disabling the firewall, set to Home network, no homegroup set. The original vista drive which I 'ghosted' before I upgraded to 7 still works with full access to all networked computers.
View 7 Replies
View Related
Sep 25, 2011
I have 4 machines on a work network. All machines are Windows 7 Pro 64bit. Password sharing is on. All computers have only 1 user account you can locally log in from.
Sharing used to work perfectly by entering the username/password of the computer you were trying to access. I did not need to have the same local username/password on all.
Now on one of the computers I enabled the Guest account and I can no longer access it from the network. All other computers work fine.
View 1 Replies
View Related
Sep 12, 2009
I have file and printer sharing enabled. I can access these shares from other windows 7 machines on the network, so I know the shares and permissions are correct. I have an active directory and I am logging onto the xp machines with the same account I always do, my own account which is a domain admin. The error I get when trying either \windows7machinename or windows7machinenamesharename iswindows7machinename is not accessible. you might not have permissions.the specified server cannot perform the requested operation.
View 9 Replies
View Related
Jul 4, 2012
I have two computers both running Win 7, one in the bedroom and one in the living room and Id like to view files from the bedroom computer in the living room. They are connected via TPlink powerline adapters so a wired connection for both
I can access the living room PC from the bedroom PC via control panel/Network no problem
but when I try accessing the bedroom PC from the living room, I get the error message login failure: unknown username or bad password
I have tried the following:
-creating a new user account for the bedroom PC, and logging in using that account and password
-changing the advanced sharing settings in network and sharing centre to match exactly
Also, I can access when I Turn off password protected sharing but I am not sure of the security of having this setting off so I really want password protected sharing on
View 7 Replies
View Related
Oct 21, 2011
i have 3 computers - a laptop (vista wireless), a home theater pc (win 7 wireless) and my main computer (win 7 wired) with all my media files.i have a network setup and the laptop and the HTPC can connect to each other when i click their icons in network neighborhood. i can also connect to them from my main computer (QUAD-CORE) but if i try to hit the QUAD-CORE icon on the laptop or the HTPC i get - network path not found. if i type 192.168.1.100 it connects perfectly (i can see all my shared files so i don't think there is a problem with the way i have shared the files) i think my problem is that when i click on the QUAD-CORE icon it is looking for the ip address but something is broken.
View 3 Replies
View Related
Aug 18, 2012
1. my machine is a Getac B300 with a Windows XP Professional 32-bit/Windows 7 Professional 64-bit dual boot.
2. My wife's machine is a Toshiba U500 with Windows 7 Professioanl 64-bit.
Normally, I use the U500 as a hub: I connect it to the internet using a 3G-enabled Sony Ericsson Elm that I control through Sony Ericsson PC Suite 6.011.00* (I have an unlimited connectivity plan.) As soon as the U500 is connected, I set up a WEP-encrypted ad hoc network and connect my B300 (regardless of which system I happen to be booted into) and my wife's iPhone.** I can do the same if I choose to boot into Windows 7 on my B300 and use that as the hub.My question however, is as to why I can't get this whole setup to work out with Windows XP. I normally use the exact same way to connect to the internet (Elm and SE PC Suite), and I've attempted to set up an ad hoc network when I'm booted into Windows XP (through Windows and through Intel Proset), and I even managed to get the U500 and my wife's iPhone to connect to the network, but neither machine would get any internet access, even though I made sure to turn on Internet Connection Sharing for the connection.So I'm beginning to wonder if it's even possible to get it to work with XP (as opposed to 7) being the hub.
View 1 Replies
View Related
Mar 8, 2012
Three Computers on a home network. Desktop in Office (Windows 7) . Wife's Laptop (Windows 7). My laptop ( Vista unfortunately). Norton Security Suite and all three. I have a network setup and a Homegroup established.
Everything was setup and working so that I could share files between all three. My wife was able to open a desktop file make changes and save it back to the desktop computer.
All of that changed. Now we get a message when trying to save the file. "You do not have permission to save in this location. Contact the administrator to obtain permission".
I have given the entire "MY Documents" sharing permission to everyone. I have checked everything. I have looked over all kinds of forums and nothing has worked.
I am to the point of doing a complete reinstall of Windows 7 on my Desktop.
View 5 Replies
View Related
Aug 10, 2011
I have a network of about 90 computers connected together and i am currently running server 2003. Now when i go to network place on my xp machine, i am able to see all of my computers that are connected together. But when i go to network place on my window 7 machine, i am only seeing some of my window 7 computers and not the xp computers. The network discovery is turned on, on all of my window 7 and still nothing.
View 4 Replies
View Related
Jan 31, 2013
I am a student worker and I am having a problem with a small project that I'm working on. I have a user that wants one of our computer labs to have his networked printer added into the list of available printers. The Printer is a Brother HL-5250DN, and I already have the .inf driver. I have written a script but it does not seem to work. I am replacing the printers IP address with a generic loopback.
View 1 Replies
View Related
Jan 6, 2009
I have an HP 3330 MFP on a computer running Vista. I am trying to add it as my printer on my laptop running Windows 7. I can see the printer listed on the Vista computer but when I try to make it my printer it just tries to connect forever. Any suggestions?
View 3 Replies
View Related
May 20, 2011
I have a desktop running Windows Vista Home Premium and I connect to it via the built in vpn client with Windows 7 Home Premium. I can access shared files a folders but, I have it set up where I can access flash drives and CD drives over VPN. Just tonight this has stopped working. I have all the right permissions set up and it still says network resource not accessible. This morining, I did not log on to the server I just started it up. Could me not able to access shared flash drives and CD drives because I am not logged in on the server end? I will try to logon later tonight when I go back to the server.
View 2 Replies
View Related
Oct 29, 2009
I have 2 laptops and a desktop. All of them are now running Windows 7.
I am unable to print from either of the laptops. I have set up my Home Group and made sure each computer has the same password.
The HP printer I have is connected via USB port to the desktop. I can print from the desktop. When I try to print from either of the laptops it does not print.
Please help-is their a sequence of things I should check on each computer?
View 9 Replies
View Related
May 9, 2009
Computer #1 - Dual boots with XP Pro SP3 and Windows 7 RC1 7100 with Konica Monolta 2400W printer attached via USB and shared.
Computer #2 - Windows XP Pro SP3.
Computer #2 Sucessfully installed networked printer and prints normally when Computer #1 is booted to XP. When computer #1 is booted to Windows 7 it automatically detects and installs networked printer once network was correctly setup but gets error message when trying to print.
View 8 Replies
View Related
May 15, 2009
I have installed windows 7 7100 X86 on my machine. (got my own key)
Lent the RC disk to someone else who got their own key, but installed with my key...
Both activated fine and updated.
Could this cause issues later?
View 5 Replies
View Related
Jun 15, 2011
I have a user who is logged into my domain as admin and they are able to see all of my network, but they are not able to map or see a drive share that is on another Windows 7 machine. I have double checked permissions on both the users machine and also on the other two Windows 7 machines and they are set correctly.To make this even more bizarre, I can log into my domain name as them and I am able to both map and see the drives in question. The laptop that the user is logged into can see all of the network but when they try to access the drives in question, windows tells them that it can't find the drives.
View 14 Replies
View Related
Jul 24, 2012
After windows recently updated on one of my win7 machines, i can no longer see the other 4 computers on my network. 2 win7 Pro machines & 3 XP, all in same workgroup. I can see the affected win7 machine from all the other computers and can even access its files, the affected machine can connect to the internet as well but i cannot see any of the others. Network discovery is on, but file and print sharing is not and when i click it on and say Save Changes, it does not hold the change; also under: my system settings-system properties-computer name the Network ID button is grayed out so i cannot change my workgroup name even if i wanted to. I am logged on as admin.
View 6 Replies
View Related
Mar 19, 2009
Has anyone noticed a problem with ripped dvd files (ie VIDEO_TS) that are mounted from a networked folder? I get a video error message about missing files and if I press "d" for more info I get the cryptic error:
res://ehres!PlayerDenial.mcml#outofsync
Files needed to display video are not installed or are not
working correctly.
This doesn't happen with dvd files on local disks, only networked folders. I'd like to know if someone has seen this or can reproduce this error. This is on build 7057, but I think it happens on the others as well.
View 9 Replies
View Related
Jan 1, 2011
My Windows 7 Ultimate x64 machine recently stopped being able to communicate with any other machines on the network.It can ping them by name, but can't browse to any shared folders or use any shared services.I do have one networked printer, but access was via http so it seems to work. The big problem is that I have some Windows XP machines that have shared folders and shared printers and I can not access them.Here are the details of my setup.
- Linksys WRT54G router drives the internet (updated to latest firmware)
- Windows 7 Ultimate x64 machine plugged directly into WRT54G ethernet port
- Epson Workforce printer plugged into ethernet port
- 2 Windows XP machines connected via wireless
- 1 Windows 7 32-bit laptop connected via wireless
Since the Epson worked fine I thought may it is a wireless issue or maybe an issue connecting from Windows 7 to Windows XP.I went through hundreds of forum posts about people with issues connecting to XP with no luck (i.e. network discovery is on, file/print sharing is enabled, all machines on the same Workgroup, etc.).All of the various XP machines can see each other, ping each other, and browse each other's shared folders.In fact, all of said machines are capable of browsing the Windows 7 64-bit machine's shared folders, but it can't browse theirs.
From the Windows 7 machine I can ping all of the others by IP or even by hostname, but if I put "\hostname" in the run dialog, it can't make a connection.In the Network & Sharing Center I do see the other Windows 7 32-bit laptop in the network map, but I can't browse to it's shared folders.I can RDP this laptop by connecting to the IP address with remote desktop.I can ping the XP machines by IP or name, but they do not show up at all in the network map and I can't browse to them from the run dialog.A few months ago I could never access these machines by "\hostname" but if I put in "\IP_ADDRESS" it would pop up a username/password box and I could get in.This is now no longer working either.I've tried numerous things and from the firewall/network settings it seems like everything is set up to be able to discover other machines, but it still won't work. Something changed on my Windows 7 machine that has locked it from doing any outgoing connections.
View 5 Replies
View Related
May 2, 2009
I have two XP machines as well as my dual-booted (XP Pro SP3/ Windows 7 RC 7100)
laptop - whenever I reboot my Windows 7 system it fails to reconnect the mapped network drives.
XP reconnects them without fail.
The only way I've found round it is to change the workgroup name, change it back and reboot - then it works.
This is VERY ANNOYING and such a basic problem - I've seen the problem all over the internet but no solutions.
Only MS could release an RC with such an obvious bug
View 7 Replies
View Related
Oct 16, 2012
We installed a new slave computer and it is having trouble opening windows up in a point of sales program on the master. It opens it but it take a long period of time for it to open the sales window. 2 computers are running in Windows 7 and the 3rd is running in xp. How can I speed up the slaves to operate at a faster speed.
View 1 Replies
View Related
Jul 7, 2012
I have two HP laptops. One came with Win 7 Pro while the other has home edition. Is it possible to install the pro version on both the machines with the same installation disk.
I think since I own both the laptops and their respective OS, I might try to do that. The main reason is one has a clean installation disk while the other has OS image with all the bundled HP bloatwares which I dont want to go thru.
View 3 Replies
View Related
Jan 26, 2009
I have a home network with 7 or 8 XP machines. All are on the same workgroup. All share EVERYTHING. All have passwords. All are logged in with an ADMINISTRATOR account. All can see each other on the network. They all talk to each other just fine. All the GUEST accounts are turned ON.I loaded Windows 7 on a machine, and turned on sharing for drive C: I gave everyone ALL permissions. I also went into the Network and Sharing Center. I had no idea what a "HomeGroup" was, so I went a few more menus deep and found the Workgroup setting. I set that up with the name of my workgroup.From the Windows 7 machine, I can see all the XP machines on the network, and they can see the Windows 7 machine. But when I try to view anything (drive C: , for example), I get the "you might not have permission to view this network resource....". I get the same thing when I try to log on to the Windows 7 machine from the XP machines.Since I can't log on to my XP machines, I also can't connect to, and use the printers attached to them.I basically want a big, open, flat network. No security at all between machines. What do I need to do?
View 9 Replies
View Related
Nov 17, 2011
I have used ghost before to image XP PCs over the network, but have yet to try either Windows 7 or an OEM Operating System (xp was an enterprise license).
My Qs: Is it legit to ghost OEM PCs? I have 60+ new PCs, with OEM Windows 7. I was thinking that I could take one PC, set it up the software etc then push the image. I would then change the license key to the one on the box.
Is this correct? If all the systems are the same, do I need to sysprep? I have heard horror stories of system preping Windows 7 -
View 7 Replies
View Related
May 16, 2009
So I have a network with 3 computers, a readynas, and multiple network printers.
Two machines have 64 bit RC 1, one has XP.
XP machine can see both Seven machines, and NAS.
64 bit machine one can see everything as well.
64 bit machine two could see everything when I did the first install of RC. I reinstalled to fix some boot manager issues, and now it cannot see the XP machine, nor the NAS from windows explorer. I can connect to the readynas through it's IP address in a browser no problem, I have full internet and networking between it and the first 64 bit machine.
No homegroup is set up on either seven machine. The network is set to Home. Drivers are installed for the Ethernet properly, latest drivers.
I looked through settings and everything seems to be gravy. What am I missing. Nothing changed between the two installs except 18 hours of time.
View 9 Replies
View Related
Apr 15, 2011
I have 2 machines MACHINE1 and MACHINE2 running Windows 7 Ultimate x64 and am trying to map to the D: drive from MACHINE1 machine on to MACHINE2. I enter \MACHINE1D$ as the drive address but then it tells me access is denied. The account name and password is the same on both machines (no domain here) and I have tried specifying MACHINE1Qu0ll as the user name but it still won't let me map the drive.
Curiously I can see the D: drive when I double click on MACHINE1 in Network but I cannot write to it without "Access denied" messages again.
View 5 Replies
View Related
Oct 21, 2012
so I have a hp a910 printer connected directly via ethernet to my router. The printer shows up in my Devices & Printers, as a HP a910 network, and I have it set as my default printer. However if i go to print lets say from Word or really any application, and I print to my default it won't print, as the HP a910 shows up as offline. But if I select the "plain" HP a910 from the printer drop down menu, it will print. Why is this, and is there a way to have the "plain" HP a910 as my default printer?
View 2 Replies
View Related
Sep 1, 2011
Here is what I'm trying to do, I have 3 computers running Windows 7 (1 hp & 2 ult) and I would like to be able to sit at any one of them and log-in to my Account Name and see my files,desktop,favs. ect.... And have them synced together... i.e. ... If I add a file to my default computer and then logoff and go to another computer on my network and login to my Account, the file would be there too. I hope this makes sense. I do already have them networked, file sharing, streaming.
View 8 Replies
View Related
Nov 1, 2011
I had my HTPC up and running last night, watched a movie, turned it off and went to bed. When I woke up this morning I found that I couldn't get any sound while playing videos through my web browsers, thinking it might be a video card issue I first checked some of my movies, but they also wouldn't play with sound so I deleted my nvidia files and reinstalled them. No luck, on one restart I lost my internet connection with my router. If I look inside the Buffalo's settings, I can see my HTPC's IP address (after running ipconfig /all on the htpc) I did a system restore but that didn't work. I even went so far as to do a clean install of Windows on the HTPC, but that also didn't work. I keep getting the yellow triangle and the message "unknown network" The HTPC tells me to check my router, which I have restarted a number of times unplugging the cable modem and the Buffalo. Turn on the cable modem get it online, then plug in the Buffalo, but nothing works. I have tried switching ethernet cables, ports, but no luck.
View 3 Replies
View Related
