I installed Windows 7 just fine. The video card on that computer is old, a Radeon 8500. No drivers exist for Vista or Windows 7. Windows 7 used the default VGA drivers. I purchased a new video card, a GeForce 6600, which has Windows 7 driver support. I installed the new video card. The bios screen comes up and post, then it goes to the "starting windows screen", then the computer reboots back to the bios screen.
I have an XFX motherboard (x58i), model # MD-X58I-CH09. It has three PCIe slots. I have an Nvidia GEForce GTX 260 graphics card in one of the PCIe slots (middle of the motherboard). This is running two 22" displays with no issues at all.
I also have a Asus ENGT430 video card with HDMI output that I want to load into one of the other PCIe slots. When I do this, the computer will not boot properly. It starts (displays the splash screen for windows7), but after that it appears as if there is some sort of conflict. Probably a driver conflict but I cannot even see anything or log in to the PC. Will the mother board support two different graphics cards? If so, what do I need to do to get it to work. I have not installed any drivers for the ASUS graphics card because the instructions have you do this after booting. With Windows7 I didn't think I would have to install anything.
Yesterday I got a PC from a colleague once I started up the PC everything works fine, but since there was a lot of random programs on the pc, I decided to install my own version of Windows, Windows 7 Enterprise on it.When the whole installation was finished the computer started, everything worked fine. BUT the PC did not recognize the Nvidea Geforce 560ti video card. Since It worked fine before I re-installed windows, I am sure that there is nothing wrong with the cables, however I think it is a problem with the Bios configuration. (because that is what changes after a reboot right?)So, I try to change the Bios configuration to, booting both display PCU (i think) and PCI E, but this did not fix the problem.
My suggestions are; either to update the bios, but I'm not sure witch version I need. Also, I could disable the onboard VGA standard 14mb videocard, but I did not try this because I'm afraid I will get a black screen, and I also read in different posts that the PC will automaticly re-install the standard VGA.I have been lingering around sevenforums for a while, I have always found my solutions here, but this time I'm in really big sh*t.To make things easier I will also post some information about my new PC.
1. Motherboard is from Foxconn, Its a FlamingBlade. 2. The CPU is Intel i7 ( i think.) dual core aswell. 3. Western Digital WD Blue250GB 7200 RPM 16MB Cache SATA 6.0Gb/s 4.550 Watt LC-Power Silent Giant-Green Power Edition Non-Modular 80+ 5.Geforce GTX 560 ti oc 1gb ddr5 2xdvi mini-hmdi 6. Corsair DDR3 4GB PC 1333 CL9 KIT (2x2GB) 7. BENQ 2220 HD, 22
At the moment I'm at work thats why I dont have Exact information regarding the Motherboard and the CPU. I will provide this information once I can.how can i get my computer to recogize the video card?
I have built them formatted them, fixed them added components many many times...This is my issue, Internet explore won't open....well it opens and I get a ap crash notification. I take out both of my different videos cards and use internal video and it does not crash. The problem is this is my living room movie file player and the video cards make a huge difference....I also need explorer as well....now Chrome works but that is not what I want..
I purchased diablo 3 for my husband & my video card is not supported so he's unable to play, my computer is a HP P624 f-b desktop with a Intel GMA intregrated graphics, I am aware I need to up my power supply also, I have no idea what video card can be used to upgrade so the game is playable, not looking to spend a fortune?
PI have to use onboard sound card to have audio through HDMI output from video card. The external sound card installed is Xonar DG and it comes with SPDIF output header to be interfaced with video card. But I do not see no such header on the video card. I wonder what video card has such an interface header.
I have recently purchased Samsung RF511 notebook and I have been trying to run HD video files(mkv) and they do run but it is very laggy and stuttering occurs very often. So I looked a bit into this matter and what I have found is that the VLC player that I am using to play the video files runs of the onboard graphics card and not the nvidia 540M card that is also installed in this notebook.
I had an OEM version of Windows 7 Home Premium x64 installed, and one day my windows started hanging after the windows logo (when the login screen would appear). I hadn't installed or updated any drivers. After being unable to fix the problem through restoring to a system image, startup repair, etc. I reinstalled Windows 7 x64 from a clean iso (no OEM ware). This meant I was missing some drivers. I downloaded the drivers from the Lenovo website, and after installing the video driver, the problem occurred again. The system does however work fine on Ubuntu 12.10 (Linux).
Using: Lenovo IdeaPad Y560 Windows 7 Home Premium x64 ATI Mobility Radeon HD 5730
W7 Home premium. To clean up my desktop, I would like to transfer some seldom used programs to an SD card or a USB flashdrive. When using XP I would simply go to search,get all the files and move them. How can I do this on my W7 computer.
I had this issue with my graphics card and could not find a solution, I went into the BIOS and changed the sound from Auto to Enable and that gave me my sound back.
I installed the OEM version of Windows 7, which came with all the basic drivers, but looking at the dxdiag box, my version of the graphics card I have is much older than the one on the ATI website.
I have the ATI Radeon HD 2400 - 1GB the version in dxdiag says 8.632
The latest is v9.9
But I cant seem to remove the old driver to update it, and I know this is incorrect, but should I just install the new one?
My system was working fine last week until I've installed an additional SATA HDD, windows will boot up until the windows 7 logo after that its all black screen, I've waited for hours for some response to happen but nothing happened, I've reformatted it a few times with the same outcome. I've tried resetting CMOS a lot of times but to no avail. But this evening I tried taking out my Graphics card and other peripherals and then windows boot! it boots with all other accesories(wifi card,firewire etc.) and the new HDD but when I try to reinstall the Graphics card it goes back to a black screen after the windows 7 logo!! is it a case of a busted video card? if so then why does it have display? I also checked the back of the Graphics card's heatsink and it has this white paste-like goo that has hardened, should i clean it and apply new thermal paste?
I am putting an older PC together from 3 partials & I installed this card because my sound was not working & it has Sound & Video ports on it & so I thought it might be a sound card. But It also has a phone line in & I believe a Ethernet plug in.After running Windows Update all of my issues, including no sound were resolved.I believe this card is a Dail UP modem & I would not use Dail Up if it was the only way left to get online...I would never surf the web again!I just need to know if I need this card for anything besides a dial up connection?
I think I got all my drivers figured out except for the sound card. I've tried the Lenovo site but it says Vista should use the Microsoft drivers and those don't seem to be working. In Device Manager I see "Multimedia Audio Controller" with the ! icon by it. "The drivers for this device are not installed. (Code 28). There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver." I search for updates and find nothing... I tried the XP version but that didn't work.
I installed a Rosewell RC-217 Raid card (Silicon Image Sil 3124 SoftRaid 5 Controller-- in Device Manager). The card installed well in Windows 7 64 bit. No problems in device manager.The problem starts when i plug the drive in then rebooted. The boot stops at the 'Starting Window' and hangs. If i boot into windows then plug the drive in all work well. Windows sees the drive and i gave it a drive letter. works great.Problem is i can't boot my system without un-pluging the drive.
I have the HTOmega striker 7.1, and I cannot get windows to recognize it. I try to load the drivers and it says that "there is no device installed". This card worked perfectly in my XP media center ed. But I have been fighting with this a couple of days trying to get this thing sorted. I have the onboard sound off in the bios. This is in windows 7 home premium.
So far i have a GT 520 TI and i am looking at this video card (Newegg.com - GIGABYTE GV-N650OC-1GI GeForce GTX 650 1GB 128-bit GDDR5 PCI Express 3.0 x16 HDCP Ready Video Card) i saw some gameplay's of it and so far it look's and play's very good, but it say's it need's PCI Express 3.0 x16 and my motherboard that's a Gigabyte GA-M68MT-S2P, It say's PCI Express x16, I really don't know what version of PCI Express my motherboard is, my question is, Will my motherboard work with the GTX 650 and does PCI Express 3.0 mean that i need to update my motherboard?
Recently ran a bunch of malware / antivirus programs to get rid of a zeroaccess trojan. (malwarebytes, mcafee, cccleanter, eset, hitman). Was finally able to get rid of the viruses in the services.exe and desktop.ini files. However once they were cleaned and got everything back to normal, I'm having problems with my video card being recognized by anything. Only recognizing the Intel® and not my Nvidia gtx 560M. It's not listed on the dxdiag page, not showing up as a selectable option for The Elder Scrolls Skyrim. Was working fine a few hours ago. It's listed under device manager just not showing up anywhere else. Just wondering if getting rid of those viruses might have deleted some needed .dll or something
I have a gateway sx2840-01. I need a little more graphics power.It is a slimline low profile set up. I have found a number of cards that would take care of my graphics needs but all seem to require a much larger power supply. Really having a tough time getting advice on upgrading the power.How important is it to have more power?I have 200w; most upgrade video cards require 350w- 600w. Can I get away with what I have? If not, what are the options?
-HP Pavilion p6750z Desktop PC-AMD Athlon(TM) II 250 dual-core processor-6 GB RAM-512MB DDR3 AMD Radeon HD 6450 (PCIE)-Windows 7 Home Premium 64 bitSo, two weeks ago I bought a desktop PC from HP. I wiped the drive to get all their vapor ware off, installed my software and everything went fine. Windows Update recognized the hardware on my machine and downloaded and installed the appropriate drivers after the wipe.Here's the problem. My girlfriend followed suit two weeks later and asked me to do the same thing for her. Our machines were slightly different but for the most part I expected a similar experience. Except it wasn't. This time Windows Update failed to recognize the Video Card after the wipe.So now she has this nice video card sitting in her machine using a Standard VGA Adapter instead of the Radeon drivers it needs. No matter how many times I download and install the Catalyst software from ATI's site it doesn't catch. What am I doing wrong?
I just installed a 2nd video card & windows isnt seeing it or the other two monitors that are plugged into it?I went to Screen Resolution>Detect & it isnt see it?And I started the computer up from shutdown with the graphics card fully installed with both monitors plugged into it.
when I turned on my pc, monitors says "no input detected" . At first I think my monitor was the problem but when I connect it to my laptop it works. So I thought the problem is my video card but I inserted my old video card and it is still not detected. So I think its not the video card problem. Right now I just using my MoBo Graphics..
how do I change my resolution to 1440x900? I go into Screen Resolution and there is no 1440x900 in between 1360x768 and 1600x900. I have the driver for my monitor and my Nvidia 8300 GS Video Card (256 MB), so what do I do?
