I am trying to install windows 7 on my intel D945GNT board. I am doing the clean installation is gooing smooth upto the "completing installation" step. Once it reaches that step after that its refreshing first time. Then it is hanging there.
I am not able to figure out the problems from the previous threads. I don't have any ethernet connection to that PC and even there is no graphics card expect the on board card.
Previously I was using vista, but now I am not able to install vista also. If I install vista also in the same place the installation getting stuck.
I am building two servers with identical hardware ... Intel S5520HCT mother board, dual Xeon E5607 2.26GHz, Seagate SATA 2TB drive, 8GB Crucial memory and OCZ Agility SSD drives. I am using the onboard video and motherboard has been update with the latest BIOS.
But when I install Windows 7 Pro 64 to 50GB partition on the SATA drive, or to a single partition SSD ... the system hangs after the final reboot right after "Updating Registry" and "Starting Services" during the "Completing Installation" phase. The next input should be username and computer name ... but it never gets to that.
I have minimum hardware attached ... disabled networking in BIOS ... and tried with a number of different memory configurations ... etc .. etc ... but still the same result .. and I am now totally clueless. I even tested all my hardware on a Tyan S7025 board ... and there it installs without any issues.
I installed Windows 7 Ultimate 64 bit build 7600 on my machine and I'm having a problem with the OS not even recognizing my Audio hardware. I've visited the Intel site and I don't see any available options for drivers there...just the following:
RAID: Intel® Matrix Storage Manager Driver for Intel Desktop Boards
I've pulled this down and I'm not quite sure how to install or if this will even correct my problem. All I'm seeing is a red X over the audio icon and when I hover over it I get the message "No Audio Output Device is installed." I had no problems with the device with XP 32 bit. Any suggestions?
error coming keyboard not present on intel orignal board having i5 processor, PS2 keyboard lights glow as soon as keyboard is plugged in the PS2 socket but it does not work, tried to connect a USB keyboard but same message is coming and problem is persisting
Whatever this is has really messed up my computer! I can't play any DVDs or any video that uses Flash or Shockwave! I'm getting desperate, I have used Driver Genius Professional to no avail.Intel no longer offers any kind of support, I have tried downloading their general driver but every time it locks up and crashes, I assume for the same reason the Flash and Shockwave does.
I have heard that maybe some versions of Windows 7, such as Starter or Home Basic, will not permit the automatic switching to a stand alone graphic card (Nvidia or ATI Radeon).
I wish to find out if this is correct and if so, which versions are restricted? I use Photoshop and play HD video files up to 2GB in size, so I want to ensure switching is performed for improved graphical performance. Based on this finding, I can then decide what O/S to buy with a new laptop I'm about to purchase.
I recently rebuilt my pc with a gigabyte ga h77m d3h and core i3 2120 with 512m dedicated to on board graphics. The computer will start fine after you do the fresh install of windows 7 prof. 64 bit with the default video driver from windows. I've updated my bios using gigabyte's @bios tool and I've tried installing th drivers from the disc, from intel's website and with automatic update in device manager. Could a corrupt windows install file cause this issue? I downloaded the ISO from the Microsoft website when I bought the product key.
I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
We'll I've found others with similar issues, but none exactly like this. Have the HDD and SDD setup on RAID0 due to using IRST. 64Gb of the SDD is allocated as RAID0. When W7 prompts me to select the drive for W7 installation the only disk that appears is the 64Gb unallocated SDD sector.I've loaded the IRST 64bit drivers from the ASUS Mobo disk too. It recognizes the file I direct it to, but once loaded it still only recognizes the 64Gb unallocated SDD.
I have tried to install Windows 7 SP1 64 bit and it gave an error message of: windows update encountered an unknown error code 80246007. I also get the error message after my laptop restarts if the installation shows it supposedly installed: installation not successful an uknown error has occured Error 0x8008095. I have also tried the 3 steps to try before installing Windows 7 SP1 and I still get the above errors.I would like to know the following:
1. When we update Windows where does it store the updates. Because I noticed that each time I update I loose disk space and I am wondering if I could delete these updates once I know they work.
2. I noticed a folder in the color of purple. It is: c:userusernameApp Datalocalmigwiz in this folder it contains the following files: debug.txt, diagerrr.xml, diagwrn.xml, miglog.xml, setupact.txt, setuper.txt what is the folder for.
3.I use windows disk cleanup and ccleaner. I noticed that when you install or uninstall programs it creates a restore point and shadow copies. I clean them out once a month. Is there anywhere else that shadow copies are created and can be deleted. How about does Windows 7 has a cache where we need to delete files. How many temp folders does windows 7 create. I would like to retain some disk space back. Do you know if Office 2010 where it stores it updates and can we delete them once we know they work.
I was having problem running office 2007 on my windows 7 desktop hp machine. I uninstalled and wanted to install it again, this time i am getting this error message "error 1935. An error occurred during the installation of assembly component{4C0384C6-ED23-4E23-95F5-C812AAD8EFFE}. HRESULT: 0x8002802F"
I bought a new laptop now and I am not so well with the technology it says: Intel Corporation driver update for Intel(R) Management Engine Interface so what do I need to do now?
May I know can I disable Intel® Turbo Boost Technology Monitor & Intel® Management Engine Components or not? If I disable both of them will cause any bad effect?
i am on win 7 using a U300 laptop and i wanna install xp in a dual boot so i decided to use this guide: Dual Boot Installation with Windows 7 and XP
and use the 2nd method, so when u get to step 4 where u press enter, i press enter and i get the error saying i don't have an installed HDD drive and all i can do is press F3 and restart
I've just installed Windows 7 on top of my old XP machine. For the first hour I had no problems connecting to the internet. I downloaded antivirus protection (AVG) and Comodo firewall and windows 7 began updating itself. The comodo firewall download stalled and I had to manually reboot the computer. It seemed to start fine in normal mode and windows finished updating itself. Since then however (i.e. after the reboot) I have not been able to access the internet with an 'error 651" message displaying. I removed both AVD and Comodo with no change in the situation. I also did a system restore to before the windows updates, still no luck.
I access the internet via a broadband modem connected to a router. I don't have the full details of the models with me now but can repost in about five hours with the details if needed. I've searched online and note that many have said I should replace the raspppoe.sys file.
Since this is a brand new instal, should I just re-install Windows 7?
i've created another topic related to a BSOD . Anyways i've decided to format my OS so i did . But an error showed up , i'll tell you exactly what it said : Failed to create a new partition on the selected unused space.[Error:0x8004240f].That's what it said . I don't know what caused it but after i deleted that partition , i couldn't just make a new one it kept giving me this error
I have built new PC ( mb: asus M5A78L-mlx Plus,cpu: AMD 2 x 260,4GB Ram AM3,1TB HDD) Trying to install windows 7 Pro 64 bit and i get this error saying "Windows cannot install required files.Make sure all files required for installation are available ,and restart the installation." when the file are expanding.(0%).I have already changed the hdd, replaced dvd rom ,disable usb in bios,changed sata cable,removed the batt on MB and still no luck so far.
i tried installing win 7 pro upgrade from student discount onto a seperate 1tb drive. i have vista premium and was doing a dual boot. files would load but after that i would get this error: winload.exe error. tried installing it alone onto the 1tb seagate drive, removing the vista drive but still the same error.
remove every peripheral and 2 stick of ram but still the same error. system is intel q6600 on an asus p5ke-wifi with 4 gig of 8500 ocz ram. also tried repairing my vista installation but the same error appears.
I'm getting a very strange installation issue. I was hoping someone could shed some light on my problem.
To start with, I'm using a Windows 7 v7000 installer disk. I'm confident that this installer is good, because I've already set up my gaming machine with it.
Now I want to install Windows 7 on my home theater PC. The components are as follows:
ASUS P5N-EM HDMI
Intel Core 2 Duo 2.66Ghz
Western Digital HD
2 GB of Ram
I am able to install windows Vista on this machine with out a problem.
This is what happens when I attempt to install windows 7:
Everything appears to load off of the DVD drive. I go through "Copying Files," "Expanding Files," "Installing Features," and "installing Updates." Then the machine reboots.
The installer continues to behave as expected, with "setup is updating registry settings." Then it reboots again. This is where the Sh*t hits the fan...
After the reboot, it takes me into a black screen "Windows Error Recovery." If I ask the machine to start up normal, it immediately reboots again, returning to another "Windows Error Recovery" screen. It will repeat this cycle forever.
If I ask it to start in Safe Mode, then I get the following error message: "Windows cannon complete installation in safe mode. To continue installing windows restart the computer."
I'm at a loss. I even downloaded build 7022, and the problem still persists.
I used to be able to install Windows 7 Betas just fine, but now when I went to go install the latest build 7057, it gets up to the Copying Files section, then jumps straight to 100%, then goes into Expanding Files, then comes up with an error about not being able to find the files!
I tried reverting to a previous beta that I knew worked, same problem.
I tried reformatting (through Ubuntu) and still can't get it to work!
Anyone else have this kind of a situation?
EDIT: I'm using a IDE -> USB Adaptor, tried two different DVD drives, same result.
I would LOVE to have Windows 7 on my Eee, but it just won't work!
I've been trying to install Windows 7 for like 3-4 times now and every time I get to the Completing Installation part I wait a little and suddenly I get a red error box and it says something about "Windows cannot be installed..." and then pc shuts down. The error box is there for like 0.5 seconds so I cant read it, but its just like 1 sentence. "Cannot be installed" and something after that.
I am trying to install Internet TV on WMC so I can watch free streaming TV programs. When I click on the install button, WMC starts to download about 5 MB of data. When it finishes downloading, it gives me an error - Installation Error, A problem occurred during installation. Please try again later. The only option I have is "Close". I tried to reinstall many times but every time yielded the same error. I couldn't find anything in the event logs wrt this error. Where should I look and what should I do?
i have a windows 7 Enterprise installed on a laptop..the issue with windows 7 is that i the list of "Cryptographic Service provider" in the drop down is not available..the drop down is for "Cryptographic Service provider" empty...what settings need to be done for that..
