Reading around I thought IE eliminated it's memory leaks but I definitely have it when I use IE8. I typically have three windows of IE8 open and within one will have multiple tabs, maybe five or six at the most. Over time memory usage definitely grows and is not reclaimed as tabs or even windows are closed. Only way I can reclaim memory is by closing all windows and putting computer to sleep. When I awaken it and start again memory usage is back to it's initial state. But then it will grow again as I use IE8. Seems to happen no matter what websites are visited so I don't think a specific site is causing the problem.
i am having a problem with my memory getting tied up / used up and not being able to access it again until i reboot.
machine: dell xps studio 8100 os: win 7, processor: i7 2.8 ram: 16gb (max it will take) video: ati radeon 5700 (running 3 monitors)
versions: as far as i know i am running current versions of everything, including video drivers, flash, chrome, etc. (i've tried running chrome with both the build in version of flash and the system version -haven't seen a difference)
browser: i nearly exclusively run chrome / canary with auto-updates so am at the latest builds.what seems to cause me to use up / run out of memory is after i play videos (Internet, netflix, etc.), the memory seems to get used, but is not returned to the system, even if the browser is closed and re-opened.right now for example things are working fine; i rebooted my system a couple hours ago (but have not played any videos). i have adobe lightroom running, picasa, chrome and canary (currently 4 web browser windows open with 52 tabs open). task manager currently shows me using 8.20gb of ram, that seems pretty reasonable to me.
normally my system will keep running properly (if a program is closed, memory is freed up) right up until i start to play any videos (Internet, netflix, etc.) then it will start using up more memory. (of course i expect it to use more memory during playback) however, even if i restart the browser, the memory does not get freed back up. for example, just prior to the reboot, with everything closed, i was using right around 8gb of ram. once i rebooted, i was using 1.something gb of ram prior to opening any programs.however, once i start playing some videos, i never seem to be able to get my ram freed back up again unless i reboot the whole system. this is not just a problem with how much memory the system shows as being available, i frequently actually run out of memory. (task manager will show me as using around 15gb and then everything starts swapping out like crazy).
I find that if I run chkdsk and watch the memory usage in task manager it jumps by about 50MB every 2 seconds or so until it either finishes or hits around 3.2GB at which point my physical memory shows 99% used (I'm running 4GB), and the system of course slows to a crawl.f you just run a quick chkdsk on your boot drive you may not notice it, but try running something longer like chkdsk /r on a flash drive or chkdsk /f on a bigger internal drive (but not your OS drive as this would require a reboot) and watch the memory usage climb. I have duplicated this on both systems I have running Windows 7. My XP machine (checking the same USB flash drive) uses a much more normal amount of memory for chkdsk (20 - 30 MB).
Memory Usage Goes Up Gradually (Memory Leak)When I starting the Windows (in the first few hours) everything is normal But after 1 day or 2 (sooner or later) the amount of available memory gradually goes down and the physical memory usage increasing. This increasing, continues until the memory usage reaches near the 88% and at that point , there isn't any memory available to operate any software . Also when memory reaches that point, I can't access any drive in the HDD; because everytime I want to open any folder, the following error appears :c: is not accessible.Insufficient system resources exist to complete the requested service At this point, I even can't shutdown or restart Windows normally; I must restart windows manually by pressing the restart button.after restart, everything goes to normal again; but this problem appears again and again ...
my system : ------------------------ OS : Windows 7 x86 Cpu : Intel P4 3.0GH Vga : nVidia 6600 MB : Gigabyte GA-8I915G Duo PSU : Corsair 750W RAM : 2GB DDR-400 Transcend (I have these memories for 2 years) Physical Memory: 2000 mb Paging File: 2000 mb Virtual Memory: 6000 mb
0- using some optimizing and freeing softwares like (Memory Booster Gold - RAM Saver Pro - CleanMem)
1- Scanning my computer with antivirus and antispywares
2- Changing antivirus software
3- Updating windows with all updates available via Windows Update
4- Updating drivers of all hardwares
5- Downloading and installing the following hotfixes that are related to memory leak : The memory of the nonpaged pool may leak when you enable IPsec on a computer that is running Windows Server 2008 R2 or Windows 7 A memory leak issue occurs in the Windows Management Instrumentation service on a computer that is running Windows Server 2008 R2 or Windows 7 FIX: A memory leak may occur when you use the Microsoft ActiveX Data Objects Library in Windows Vista, in Windows 7, in Windows Server 2008, or in Windows Server 2008 R2 A memory leak occurs when an ADO Recordset object calls the UpdateBatch method A nonpaged pool memory leak occurs when you use a WFP callout driver in Windows Vista, Windows 7, Windows Server 2008, or in Windows Server 2008 R2
I was just downloading somes big files with jdownloader while watching a movie, but the system was slowy getting laggy, so I checked the memory usage and i was almost full (90% of physical memory in use) and perfmon could not show me anything.
Right now, about ten minutes later, the memory usage is still the same, I killed jdownloader, java and kmplayer , but it still the same. I cant find who is guilty. I post some screens.
My cfg :
Core2Duo E8400 3GHZ
4GB DDR2 PC6400
Win 7 x64 Ultimate
Notes : I use nod32 AV (not smart security). Superfetch is off.
To start, I have Windows 7, on Sony Vaio laptop. I have been working on the issues with the malware removal team, but now machine looks clean, I am still having issues. When starting the computer and going to the task manager, I can watch explorer.exe start at about 18K memory usage and then grow constantly until it is running with almost all of the computer's physical memory after about seven min. I cannot get the context menu to show up after a few min by right clicking on anything. I had been experiencing "freezing" while playing Eden Eternal (an online role playing game) before that, which made me consider malware and seek help here at BleepingComputer. The freezing has ended, last time I played on that machine at least, but now there seems to be some issue with the explorer.exe taking all of the memory. I haven't been using the machine since I don't trust that there's not something running in the background that shouldn't be. In resource monitor there were "connections" that had "-" for both the name and the PID, but I don't know if that was the malware of if that's normal somehow? Issue with explorer.exe seems to be limited to only one user account, and not the other one. That is to say that if I log on one of the other accounts explorer.exe behaves normally, as far as memory usage.
About a month ago I acquired a large .mkv file. Cutting to the chase, I deduced that when, in explorer, I simply clicked on the folder containing this file, my available memory started to disappear about 10-20MB a second until it was depleted; at which point system performance came to a near halt. I also eventually found out that it was the process explorer.exe that held all of this available memory, EVEN THOUGH the task manager AND resource manager showed that explorer held a steady... 25MB. On my 4GB ram system, after just about a minute, all 2.5 gigs were gone and when the explorer.exe process was ended, all that mystery memory re-appeared.Booting in Safe Mode, clicking on this folder did not produce the same result.Over the next few weeks, I acquired more and more .mkv's. NOT ALL OF THEM create this problem, but about 40% of them do, with the exact same symptoms. I tried disabling thumbnail previewing on individual files AND folder thumbnailing, and it STILL caused this super annoying issue.I can not move these large .MKVs to another hard drive unless I am in safe mode. not acceptable.
Windows 7 x64 Intel Core i7 860 Lynnfield 4GB DDR3 i forget ram
I have a ASUS Sabertooth mobo, overclocked. Performance-wise it runs fine.. high spec's. I used standard ASUS AI II software to set and check stuff like temps. Also works fine. But that software comes with a memory leak in atkexcomsvc.I've now de-installed and am going to check other versions + contact ASUS if needed.
In the last week or so, I have to reboot my pc almost every day because the RAM usage gets up to 93% and I can't do anything, even launch taskmanager. When I've caught it before it was too full, I saw that almost nothing was listed as using RAM (system was at like 80MB). Essentially, RAM is "in use", but the use is not explained by taskmgr or perfmon.I'm prepared to learn that it's a BIOS or mem controller issue, but it never happened in several years of XP and Vista on the same rig. Also I see I'm not the only one with the same issue on Win 7 64bit: Win 7 64bit Ram Filling Up Problem?
In both build 7048 and 7068 I have massive memory leakage going on in the gadget sidebar, and can't solve the problem aside from restarting the process to clear the memory.
Is MS aware of this? And is there a fix in newer builds? Otherwise, any useful advice?
how to convert a shared video memory into dedicated video memory and system video memory? me and my friend have the same specs computers but the same game runs slow in my computer but it runs smoothly in his computer?
I just built a new computer and started with 8GB of memory. A few weeks down the line I purchased another set of the same memory because it was on such a good deal and had great reviews (newegg). It also was working well for me, so I figured maybe more could be better.
I haven't noticed any decrease/increase in system performance except Alt-Tabbing has recently got slower. Also, Windows 7 was sitting tight on 1.3gb to 2gb of memory usage prior to the extra 8 (now 16) being added. Even when gaming, it went up to like 3gb. Now that I've added the extra it's going up to 4.5gb or better. Also, is it possible to speed up my alt-tabbing? It seems to have a good 3-4 second pause in it instead of being immediate like it was.
Computer specs: Windows 7 HP 64-bit gSkill 16gb 1866 memory (BIOS shows it at 1866, too) Intel i5-2500k Sandy Bridge (OC'd 4.6 with factory Overclock presets) ASRock z68 Extreme4 mobo
I recently bought 2x1GB Ram Sticks for a Dell DimensionE510It has a Pentium4 2.80Gh Processorand factory 1 GB RAMIt's currently running Windows 7 x64hen I put the new RAM sticks in the system recognizes the new memory says it has 3.0 GB of ram and runs until I start actually using to new memory, as in start running more programs simultaneously and it crashes and I get two BSOD*. As far as I know the sticks match the motherboard, as in that's what I was told.*"Memory Management" and "PFN List Corrupt"As far as I understand it is a driver issue, but I honestly am not sure.
I have windows 7 64 bit and also running a ssd. Just a few days ago I've started to have an issue where after my computer is running for a couple hours all processes continually increase the amount of memory they are using until I get an out of memory error. Here is a pic of it around 75%. I have 8 gigs of ram (kingston) that before this never went above 4gigs of use, so not sure what is causing this suddenly.
Win 7 x64, all updates. intel core 2 duo E8800. 8gb ram in 2 pairs. Nvidia 9800GT.2x HDD with lots of free space. ESET antivirus + Outpost firewall Every time I shut down the computer, I get an error like this:The instruction at 0x72f151d3 referenced memory at 0x72f151d3. The memory could not be written.Sometimes they will auto close, others I will have to force the shutdown.The thing that seems interesting is that there's a pattern to the memory addresses.When it's a software exe crashing, it's always 0x7xxx51d3.When it's explorer.exe crashing, it's always 0x7xxx87bc.
So i have 32x Windows 7 I also have 8GB of memory.
My question is how much memory can this architecture actually see? its 32bit, so shouldn't it only see a max of 4? in the my computer properties, it tells me i have 8, but a bunch of programs tell me i have the 3.25.
Do i need to move to 64x? and what happens with the drivers for my custom built pc? will i be able to find them? (most of my disks wont install 32 bit drivers on Windows 7 beta) i cant really do the vista driver backup with driver max, because i use XP
any help? ideas? suggestions? Thoughts? Comments? Wize cracks?
i'm using windows 7 ultimate x64 with a galaxy Geforce 9600GT.
i have 8GB of ram .
on dxdiag under display tab
it says approx total memory: 4096MB.
WOW!!
my GPU is only supposed to have 512MB not 4GB!!! Is this for real?does it actually work and would i notice any improved graphical performances? also is it possible to reduce or increase that number?
I currently run 2 x 4GB DDR2 800MHz RAM in my Windows 7 64-bit PC (C2Q 9450, Asus P5N-D).
I have come upon another 2 x 4GB DDR2 800MHz RAM (of different brand) and was wondering if I add it to ake a 4 x 8GB config, will I see any significant improvement in what I do?
What I do is:
Play World of Warcraft (including the upcoming expansion) Play Dragon Agerigins (occasionally) Download newsgroup files using Newsleecher app Multimedia on the web (surf)
For the past few days, my computer, which usually performs well, has started becoming very slow and freezing. When I open Task manager, I notice that the user SYSTEM always consumes a lot of memory (about 1000 MB), slowing my system down to a crawl. The guilty process is nearly always svchost.exe (service-SysMain; PID-1948;Description-Superfetch).
Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, 64 bit Processor: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz, Intel64 Family 6 Model 37 Stepping 5 Processor Count: 4 RAM: 3893 Mb Graphics Card: Intel(R) HD Graphics, 1722 Mb Hard Drives: C: Total - 59898 MB, Free - 5671 MB; D: Total - 138978 MB, Free - 119817 MB; E: Total - 138978 MB, Free - 132177 MB; F: Total - 138980 MB, Free - 64663 MB; Motherboard: Intel Corporation, DH55PJ, AAE93812-302, BTPJ045000ZM Antivirus: Kaspersky Internet Security, Enabled
I have a problem at hand. Use Windows 7 Ultimate 64bit on a pc with quad-core 2.4, 4gb ram, until so good, but when I go in the properties panel, my windows says I have 4gb but I can only use 3.24 gb why does not he is using it?
I am getting the error message " out of memory" whist in some programs. the explorer now and then shuts down and re starts . all sorts of funny things I have 6gb ram the hard drive makes a running noise far to long on stratup yet the start up files are minimul
I'm having a bit of a problem where all of my RAM is getting eaten away by something i don't know. I have noticed that when i start some programs the RAM Just keep going away but when i then look in task manager or Resource Monitor there is nothing taking up that much RAM. i have 4GB RAM
On windows 7 I have the CPU usage plug in, added when I became convinced that more was happening than I thought. Although nothing is set in shedule processes, the 4 cores of the CPU are often going mad, with 70-80% of the 3 GB memory being used... Is there a program which tells me what the bl..... machine is doing. Perhaps a permanant window on the bottom of the screen? It is so frustrating as it slows down internet explorer and generally seems to be more interested in its own thing than my requests.
I have a computer that is running Windows 7 Ultimate 32-bit. It has 6 GB of RAM installed, but it says that 3.00 GB are usable. My understanding is that Ultimate 32 bit can handle 4 GB of RAM. What do I have setup in correctly?
I think windows 7 is so cool and i haven't got any complaints. Going from xp home to this is Awesome.
However I play flight sim x and since i installed Windows 7 i keep getting out of memory errors after about 5 minutes into a flight. It ran great on xp with 2 gig of ram and an old 8800gts 640 meg card.
I'm still using the same graphics card but i upgraded my ram to 4 gig of corsair ddr3 ram.
I'm not really experienced with understanding graphics and ram issues... can anyone help
