IDE Drives Problem - Not Seen Is The BIOS
Aug 13, 2009
I just installed the new Windows 7. Until I deconnected my second HDD, a 120 GB IDE does not wanted to install. Now when is installed, I reconnected the second HDD. When turn on the windows, it´s not seen and my second DVD-RW, which is IDE also is not seen.
Also none of those 2 is not seen is the BIOS. At startup it hangs 30-40 seconds, freezing, before displaying BIOS Post message notes.
Before Windows 7 I had Vista and all was working fine.
What can I do? Please, a hint to sove that.
View 1 Replies
ADVERTISEMENT
Aug 7, 2012
My pc had suddenly decided to not recognising any of my Sata drives. Win 7 32 bit, 4 gig ram, asus psn d motherboard,ati sapphire 1g pci card, 1 250g western digital Sata drive 1 x 1tb seagate hdd. Sata DVD drive
Yesterday my pc froze up while surfing the web, so reset it and that where the problems started
It only recognised one of the hdd then wouldn't boot got a bsod uncountable boot volume. So opened up the case to check if the cables where loose, nope, so decided to run a repair via the recovery console. Didnt detect my o/s at all ask me to install the correct drivers grrrrr. So stripped the pc down swapped the Sata cables to see if that was the problem, no joy at all would only find one Sata drive and DVD drive. Then it wouldnt recognise any of them, so swapped out the Sata DVD drive for an IDE drive. The booted up nothing bar the DVD drive. Have now come to a cross roads don't know what else's to try. Managed to boot via a USB drive with Linux and everything system wise, pcu, gpu etc works, but still no Sata drives.
Done some digging online and some ideas are not a big enough psu, faulty Sata cables, but swapped in an IDE hdd and nothing again.
View 8 Replies
View Related
Jun 16, 2011
i recently invested in a new PC - for my job i use high volumes of data so need a high end database setup for fast access to info - to do this i have invested in two SSD hard drives that i am hoping to run in a RAID array and these are completely dedicated to my database. So after alot of work i have my machine up and running, it has a 60GB SSD for running windows 7 64-bit home prem. on, 2x120GB SSDs that will run my database and a 1TB SATA HD for storing whatever else i have on. Now the part i am having real trouble with is configuring the RAID array, firstly in the BIOS main menu i dont see the 3 SSD drives:-However the drives all show up in the windows disk management window. Back in the BIOS, when i enter the SATA config. menu, i find that ports 1-4 are grouped together (currently set to AHCI), and it is possible to switch them into a RAID array but this is no good b/c it means my 60GB boot drive wont operate correctly - i cant seem to find a way for switching the individual ports to RAID, mainly since the ports arent listed individually?
another thing that i am unsure about is the way the drives are listed in the boot menu - they show up listed as IDE's although in the SATA config menu they are listed as AHCI controlled - i am unsure but think this may be a glitch with the BIOS for this motherboard where it doesnt update changes properly.
View 3 Replies
View Related
Aug 6, 2012
So my system (updated specs in my profile) has been running perfectly since first built in January.Saturday, a Steam update came out. Ever since then, I have had major problems. It starts with the entire system totally freezing and occasionally BSOD.If I reset (hardware reset button), then bios can't find any of my hard drives (two different SATA channels), but it can usually find the DVD (also SATA). Sometimes it will hang on the drive part of boot up. (ACHI mode is enabled.)If I do a cold boot (hardware off, wait 15 seconds, then on), then it boots and runs fine. for about an hour, maybe two... then the above happens again. It doesn't matter what I'm doing, games, surfing, or not even at my computer. I did notice that the drives were running much slower than normal, so I updated the Intel Response Time thing (whatever you call it). That greatly improved drive response and boot time. But it did not cure the crashes.Other than verifying all the case wires were firmly connected, I haven't had time to do anything else.I can't imagine how a software update (Steam) could frack up my bios or my mb, but that is the only thing that has changed between running perfectly to totally unstable.
I'm planning to uninstall steam and reinstall.I'm not confident that will help if the update has caused another problem.I don't know if it's Windows 7, Steam, hardware, or a bios issue.
View 8 Replies
View Related
Nov 12, 2012
I have two 250gb drives that are connected to my one Eide connection on my Asus P5Q deluxe Mobo. They show in the bios and on startup, but not in my computer or drive manager? How can I get them to show up so I can format and use them as extra space.
View 3 Replies
View Related
Aug 8, 2012
in the past i had a seperate personal hd for my work laptop I would take my work HD out then install my personal drive in and it worked great. But now on new laptop there is a biosandhard drive can I still switch hard drives or will it not work or will my work know I swap. Them.
View 2 Replies
View Related
Jun 17, 2012
So, I just built my first computer, components below:[CODE]Anyways, I restared the installation, but this time, I got the "No drives were found. Click load driver to provide a mass storage driver for installation." message. I looked up the solution and checked the BIOS, when, to my surprise, I could not find the SATA connection to my HDD.
View 9 Replies
View Related
Aug 23, 2011
I've got an Acer Model As5742 Laptop with an i5 480M processor and 8 GB of good Ram. I'm running Win 7 Pro 64 Bit. It's only about 5 months old and this started about a month ago. I have no other problems. IE: Blue Screens or Lockups or anything, just the Bios clock changes to a random date and time after every restart. I replaced the Bios battery twice and it only effects the chore of having to reset the time in Windows every time I boot.
I'm going to send it to Acer to be repaired within a week or two, but maybe it's not a bad timing mechanism in the motherboard and one of you people have a correct solution to it. Which will save me the trouble of sending it in for a motherboard replacement.
I do have all the drivers and bios updates installed. Oh yes I've ran about 15 different virus Etc. Malware scans with several different products and they all come back clean. I ran System File Checker SFC /scannow from the command prompt several times that also comes back OK.
View 3 Replies
View Related
Aug 25, 2012
so i did a bios update, and it wont boot after the update.its a asus m4a79xtd evo (rev 1.01g)i dont have a backup of the bios
View 3 Replies
View Related
Jul 21, 2011
I just finished putting together my computer, installed Windows 7 Pro 64 bits. However, both of my hard drives (one SSD, one regular HDD) are showing up as external drives (plug-and-play). If I click the "Safely Remove Hardware" icon, I could actually "eject" both of my hard drives.
View 5 Replies
View Related
Jan 19, 2011
I have a five-month old HP Compaq Presario Laptop, which has been working fairly decently (I've had a few virus scares, and my Norton quarrentined something a twenty days ago). On HP's advice, I just updated the BIOS on my laptop. It's currently stuck at Verifying New Bios Image, and it's at 100% - It's been stuck that way for a half-hour plus.
View 14 Replies
View Related
Dec 1, 2012
My Samsung series 3 laptop has been sending out popup messages telling me I need a bios update, I go to the Samsung software update site and this bios update has been failing, I have made several calls and chats to techs at Samsung who tell me to do what I have already done, they tell to ask for tier 2 tech, who can go in my computer and fix it , When I finally got a tier 2 tech, they told me the same thing, I told him what I had been told about him and what he could do, He said, is it working , I said yes, but settings on computer change on their own,like wifi turns itself on and that concerns me. Anyway, He said that it didn't need a bios update,even the Samsung website said this computer needed a bios update. I posted this on hardware,firmware concerns, and they told me to post here, I was going to go to a site ,that had a download that checked drivers,
View 3 Replies
View Related
May 26, 2012
What are the types of BIOS over years up to present BIOS types ? What make each BIOS unique and better then the previous ?
View 3 Replies
View Related
May 30, 2011
am trying to do a backup of my Win 7 system drive (C, but the backup utility is saying that it must backup by non-system drives (E: and H, which happen to have "System Volume Information" folders on them. They are not system drives. E: is my main utilities drive and H: is my games drive.Somehow, Windows thinks they are system drives, when in reality they aren't.Any ideas on how to change them? When I go in to Disk Management, they are not showing as system drives. They are all partitions on the same hard drive, but there are other partitions not included in the backup.
View 3 Replies
View Related
Feb 6, 2012
I have a Toshiba Satellite, A305 S6905 with a New Install of Windows 7 Home Premium 64 bit.Bios was updated to latest 2.20 version. I put two new, matched 2 GB ram modules in it. It does not show but 2 GB installed even in the Bios. I checked both modules by putting each one seperately in the primary ram slot and both were showing up as good. I even put the old 2 GB and 1 GB modules I had before under Vista and it still only shows 2 GB installed.It only shows 2 GB installed and 1.87 useable..It boots OK and seems to run fairly smoothly but I have not put it to the test under some memory hog programs yet.
View 9 Replies
View Related
Dec 13, 2012
i want to update my bios ( i have asrock motherboard N68-VS3 FX ) and i am a gamer who interested in performance i have bios ver 1.20 can i use the last bios update 1.70 ? or i have to download all the previous updates first what i mean is the update cumulative?
View 11 Replies
View Related
Dec 26, 2012
New system build with Gigabyte GA-990FXA-UD3(v1.1), AMD FX8350 4.0Ghz/8coreVertex4SSD, Gigabyte GeForce GTX660 2GB video, 500wPSU, Win7 Home Premium/64.System ran/loaded/updated fine for about 6 hours then crashed during game play.BIOS/Windows unable to recognize SSD, unable to re-install Windows - get as far as "No drives were found. Click Load Driver to provide a mass storage driver for installation"that is followed by:"To install the device driver needed to access your hard drive, insert the installation media containing the driver files, and then click OK"I have burned CD\DVD's and USB flash drive files for a couple of days now looking for the "device driver", but I still hang up at the same screen.I have switched SATA/power cables, reseated memory (crucial Ballistic 2x(2x4)DDR3 PC3-1(16GB total)/video card, installed a WD Caviar Black 1T HDD (not recognized), (re)Flashed the BIOS to F9 from the Gigabyte sight (system had the most current version/flash was successful - no problems with that)but.
View 3 Replies
View Related
May 3, 2012
Tried pressing DEL ESC f2 and basically every key on the keyboard during startup.. but no BIOS..
View 9 Replies
View Related
May 11, 2012
As I mentioned how can I update my BIOS version I download the latest BIOS files from the manufacturing site but cant be able to update it.I have HP Compaq dc5850 Small Form Factor PC and My Current version of BIOS is 2.1 and update is 3.3
View 9 Replies
View Related
Oct 12, 2009
how do you flash a bios for a motherboard using a usb?? I have an Asus P5KPL-CM and need the lastest bios cause it fixers a problem i have with my audio....
if someone could let me know how to go about this i wound be ever so greatful
NOTE: I have the right bios file.... I have no Floppy drive.
View 9 Replies
View Related
Apr 17, 2009
Just thought I would mention this as it is the second machine I have bolloxed now due to doing a bios upgrade.
A while ago I did a bios upgrade on a desktop machine and after doing it got a BSOD and windows would not boot. Had to format and do a fresh install to get over it.
This time round I did a bios upgrade on my laptop so that I could put a T9500 processor into it and got the same problem.
Bit of a pig this one though as I have 3 weeks of non backed up emails I will lose amongst other things.
It seems that if you do a bios upgrade windows 7 see's it as a different machine and just errors out without trying to load. There seems to be nothing you can do to recover from it.
Only option I have it to install another oppperating system on it and then see if I can downgrade bios. See if that will work.
Just be aware of this as not something that will show to often as not to common to have to upgrade bios. Hope this helps someone.
View 9 Replies
View Related
May 16, 2009
i never flashed bios before and have recently noticed there is an update on the Acer web site. The bios mine is running on at the minute is R01-B3 and the new one is R01-B4.
Is it worth updating to the new one?
Will Win 7 take to it?
What will be the benefits of the newly released bios over the one I have?
How do I go about doing it and are there any safety precautions I could take so I can roll back incase I F it up?
View 7 Replies
View Related
Nov 9, 2010
my laptop is vaio VGN-FZ31Z, is there any software i can use to update the bios?
View 5 Replies
View Related
Dec 30, 2010
I have two SATA hard drives. I was poking around in the BIOS yesterday and noticed that they were setup IDE instead of AHCI. I am not sure what either does and did not want to change anything without asking. When I first got my PC, it had XP installed, so I am thinking that is why IDE is set. Do I need to change it to AHCI? I am not having any problems. Would it be of any great advantage to change it? I understand that after the OS is installed, it is a problem to switch to AHCI.
View 4 Replies
View Related
Jul 10, 2011
how to set bios to from CD. I have dell computer
View 3 Replies
View Related
Jan 7, 2012
PC does not boot to the bios.. motherboard is z68x-UD3H-B3F10
View 9 Replies
View Related
Jan 14, 2012
I was updating with sp1 and some other updates and when it rebooted the 2nd time it got stuck on the motherboard logo so when I tried to boot with my Window7 disk "nothing" I can not boot into my BIOS so I guess I should go down and get another motherboard? I just put in a new SSD drive and loaded my Windows from scratch a couple of days ago so I hope I haven't lost 10 hours of work?
View 3 Replies
View Related
May 20, 2012
my computer when being booted up sits for about 30-45 seconds then goes to the welcome screen and turns on. My BIOS will not work. I need to change my primary graphics adapter and apparently need to do it in bios since its currently disabled. Does anyone know how to fix this? Ive tried pressing the keys to open it and it does nothing. When I force shut down my computer and you would receive the startup menu recommending safe mode etc my keyboard lights up and if I press enter it will bypass the 30 second count down before starting up my computer, but my monitor does not identify until the welcome screen and BIOS will not start.
View 2 Replies
View Related
Nov 25, 2012
There are 2 options in the BIOS for my laptop fan:Silent and Normal.Right now, it is running under option 1 - "Silent".This may well be the reason why I don't hear any sound of the fan (unlike my other laptop that has a relatively noisy fan coming ON and OFF from time to time).Do I need to switch to "Normal" mode?Will there be any problem in the long run if I stay with the existing setting?The touchpad area and its vicinity are sometimes hot (not too much though) under the current setting. Has this anything to do with that BIOS option for the fan?
View 1 Replies
View Related
Nov 16, 2009
I have never done this before. My computer is two years old. Is this something that should be done every so often or does it need to be done before I install .
View 5 Replies
View Related
May 27, 2011
I've built new PC and can't runs in bios
View 9 Replies
View Related
