Had a HDD failure - disk replaced and a clean install of Windows 7 32bit carried out.had been using backup tool to create incremental backups .. I have the nice 'backup folder' Backup set date xxxon an external HDD ... and in it a number of files
View 7 RepliesI created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedI'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies View RelatedOK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies View RelatedWhen you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies View RelatedI currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies View RelatedI have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies View RelatedI have an old HD that I used to use for backups in a different PC setup, and though I deleted those backups when I moved on to a different HD, the backups were recoverable using Pandora and I believe intact since I never used the drive in question after that time. So specifically, I now have a folder called "Backup Set 2011-02-13 190024" that contains a 84 zipped folders worth 13.1GB that comprise that backup, and I want to restore them in some automatic fashion to see what's actually worth salvaging. (I assume this doesn't have to be done one-folder-at-a-time, drilling down through five layers of branches in the folder-tree, and almost immediately forgetting where I am...) But when I look at "Backup and Restore," I can't bring up this or any target folders - the link "Select another backup to restore files from" produces a blank set of choices, and there doesn't appear to be any way to 'load' a particular folder to restore, as I would have expected.
View 4 Replies View RelatedI made a backup restore file of my complete Windows 7 32-bit PC onto my new 1tb ext hard drive. I then did a clean install of Windows 7 64-bit OS to my PC. (Don't ask, I wasn't thinking at all.)Anyway now I NEED to restore some of the files I have stored on my ext drive but I keep hitting a brick wall. I have tried compatibility, restore wizards, etc but I can't retrieve want I want onto the 64-bit system.
View 3 Replies View RelatedHow to Create a System Image Backup in Windows 7 & How to Do a System Image Recovery in Windows 7
I decided to give it a try....this is by far the easiest method of doing image/ghost creation and restore
And although on the microsoft website compare editions page it is not mentioned as a feature of Home Premium it is still there although you will not be able to backup to a network location unless you get professional or ultimate
So for me I am ditching third party software in place of the features built into Windows 7
I backed up Windows 7 from one computer to an external hard drive. If I plug this in to a Vista machine and restore it from that, will it have windows 7 on it? I'm very skeptical but I want to know something about it before I try anything.
View 13 Replies View RelatedI have backed up my system image to an external hard drive which is 500gig and I have installed a new hard drive which is 500gig. The old one that I have removed is only 320gig so I know there is no issues there. If I try and restore to the old drive (320gig) it will try and restore but if I swap it over for the new one it will not start backup and I get the message 'The system image restore failed
View 9 Replies View RelatedAs per the question title.
View 5 Replies View RelatedI have a Dell Inspiron 15R 5520.Previously when booting windows and rapidly pressing F8 and then choosing repair computer there was an option to restore the factory image on the repair menu.I then installed a clean windows retail disk and now when I press F8 and choose repair the Dell Datasafe restore option is gone. The recovery partition is intact and still contains the Factory.wim image.Is there anyway I can get this menu back or restore the factory.wim without it?
View 1 Replies View RelatedI set up Backup and Restore in the Wrong place, I believe. I set it up on my G Drive which is called HP Tools. The drive capacity is 3.95G. I began getting messages that there was no more room on the G Drive. It had only saved to the drive once.
So I went out and purchased a 8G flash drive and set it up to use that drive. Now I am getting similar notices saying there is no more space on that drive. It has only saved one restore point.
How much space do I need? In the past, with other computers, I have saved it on my C drive I believe.
I just built a new system and I had Windows 7 installed in RAID 0 on two 150 GB WD Velociraptors. Everything was fine until one of the drives had an error. For fear of the drive failing and since it was so new I decided to Backup everything (system image) and send it off to be replaced.
In the meantime, I wanted to go ahead and continue using my computer just using the other Velociraptor. So, I deleted the raid, changed the drive back to Non-Raid, Changed the BIOS back to IDE, and popped in my restore Disk. I booted the restore disk, plugged in my external (USB 2.0) 500GB HDD where the backup image is located, found the image and continued through the process. Then I got this error. "The image restore failed. No disk that can be used for recovering the system disk can be found"
Next I put in the Windows 7 DVD to see If it would install on the drive and everything went smoothly. So I again booted from the restore disk thinking maybe the drive was not partitioned or formatted properly before and tried again. Same error. Why won't it let me load this image onto this HDD? And once my new raptor comes in and I return the system to its original configuration, will it let me restore it then?
How to Backup and Restore the Windows 7 Registry ?
View 0 Replies View RelatedWhen I try to find Backup and Restore in my computer I fail to find it. I tried to load it using Command Prompt "%SystemRoot%System32control1.exe /name Microsoft.Backupandrestore" and the page shows blank with the note "The page failed to Load" I have Acronis installed on my computer.
View 12 Replies View RelatedI had windows 7 home premium free upgraded from Vista home premium.
1. The setup stored in D partition is whether win 7 or Vista. how can i confirm?
2. Recently i was creating system image but due to unavailable more blank dvd i could not completed and i had to interrupt after a single dvd disk. and again next day when i am trying to make system image, i could not getting any option at Backup and Restore folder in control panel. Pls advice.
My system info:
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P7550 @ 2.26GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4063 Mb
Graphics Card: NVIDIA GeForce GT 130M, 1024 Mb
Hard Drives: C: Total - 466843 MB, Free - 317496 MB; D: Total - 10091 MB, Free - 1408 MB;
Motherboard: Quanta, 361B
Antivirus: Microsoft Security Essentials, Updated and Enabled
I'm not exactly sure how the Backup and Restore feature in Windows 7 work. Does it backup only your operating system and important processes and certain programs, or does it also backup the data on your harddrive such as music, movies etc? Is this feature essentially the same as creating a recovery partition/disk ?
View 2 Replies View RelatedBefore buying a new Windows 7 computer I was using XP. Using the installed Retrospect 6.5 program I backedup all my files to an external hard drive.I can access the hard drive and I can see the backup file but cannot open it to restore my documents and settings.("no program associated with this file extension")The software that came with the Accomdata hard drive will not load in Windows 7.I searched the web for .rbc file" openers" but these all seem to be "commercial" programs (ie, cost money).
View 2 Replies View RelatedUsing the Windows 7 Backup and Restore feature I made a back up of my Documents folder and my Desktop (the only two things on my computer I care about). I did not check off the option "Include a system image of Drives: ---". After the backup completed I clicked on the JOSH-PC (backup file) the window saying "Choose an option below for the selected backup" came up. If I click "Restore my files from this backup" will it automatically overwrite my current Desktop and Documents folder with what is in the back up or will I have a choice as to where on my computer these files are restored to?
View 3 Replies View RelatedWindows 7 SP1 NTFS..I'm trying to create an image as I did with Norton's Ghost in XP and later when I used Norton's Save & Restore in Vista where the entire contents on my C: drive was backed up.In Windows7 Backup & Restore it's a little ambiguous where it saves in steps. I've viewed all options which are: I selected " Create an Image" on the left side of the first dialog box. This gives me these selections which are pre-selected and can not be changed: I don't want to do incremental backups where data is added automatically later. All I want is a one time only backup which creates an image of my entire C: with... Program Files, Registry, System Files, Boot sector, Partition table, etc..
View 5 Replies View RelatedWhen I try to use backup and restore, the backup and restore window informs me that my F: drive is not connected (which it is). Also if I click on "change settings" or "turn on schedule", the link appears not to work, it simply sends me to the system folder. I would like to set up some sort of automatic back up of the whole system (not just my personal documents) but can't figure out how to get it to work.
View 4 Replies View RelatedThe "back up now" button and "change settings" button and other buttons in the backup and restore center does not work, nothing happens except an icon flashes by in the taskbar. I have however managed to do a backup of my system drive but it won't let me do anything there now.
I've tried using system file checker to see if anything is wrong with the system files but it checks out ok.
Im currently using windows 7 home premium 64bit. Every now and then when im gaming or using the internet, this backup and restore thing keeps popping up. When i close it or minimise it, it comes back again and again. I tried many methods to fix it like reformatting and scanning my computer for viruses but to valid.
View 4 Replies View RelatedI need to restore my laptop to default settings with no CD or backup. I had a problem with my CD key beforehand when trying to activate my Windows 7 Home Premium, saying it was invalid - which by the way is preinstalled by Asus (the manufacturer). The CD key on the bottom of my laptop was apparently invalid. I didn't really have the time to phone up Microsoft and sort that out so left it. Also I did not think (stupidly) to back up my files. How do I go about doing this restore? I have some games installed too - Battlefield 3 (I have the disc), Crysis 2 (direct download from EA), Skyrim (disc) and Dead Space (Steam). Will these games be reinstallable - Crysis 2 in particular, as it said something about backing up the files for the game after downoading it from EA (I again didn't sigh). Will they just let me redownload it? Also will the CD keys still work? Also how do I back up the saves for Crysis 2?
View 3 Replies View RelatedHow to backup setting for a program & restore them after format or unwanted change? like Media Player settings & preferences.
View 6 Replies View RelatedI just purchased a Seagate Go Flex 2TB external drive for backups. It comes with software called Replica(v.5). I have been reluctant to use it due to reports (seen post purchase) that it causes system crashes especially with right click and that it slows system performance terribly. I have a new win 7 pro 64 bit (OEM legal) DIY build system.
View 7 Replies View RelatedI have a Toshiba Satellite A505 laptop. In my experience, Toshiba has one of the worst system recovery modules which takes ages to restore. To avoid this issue, I restored my machine to factory settings, deleted crapware, updated and backed up using the tool built into Windows 7.Now after a while, I successfully messed up the system that it takes 5 minutes to boot and is as slow as a turtle. I am considering system restore using the backup I made on external HDD.My question is, if I restore using this backup, - Will it delete ALL the data put on this machine AFTER the backup was made?- Will it completely restore SYSTEM to the backup settings? i.e. deleting the folders and registry entries added by the programs installed
View 5 Replies View RelatedIs there a canonical way to make incremental backups that permit a full restoration from a freshly-formatted disk?I made a single system image, then set up B&R to backup all the files on all drives weekly. I can see the weekly backup directories, but they seem to be full backups, not incrementals.I was able to restore from the system image, but I didn't see a way to restore the newer files. You can't do it from within Windows, since it complains as soon as you try to overwrite a system fil
View 4 Replies View Related