As I consistently format my PC every 2 months or so, I am trying to make windows installation / setup more robust and a breeze to fly through, yet my knowledge is limited. Now i only have system files on my C: (system drive) and all other important documents user profiles etc. is on another drive... for this reason when i decide to format and reinstall, i won't have to copy and paste everything etc. so atm i am able to format and install within seconds. But my concern is when i installed windows 7 then pointed the registry's profilelist to the proper destination (eg. d:usersUsername) it wouldnt merge the already created profile... then i also changed the imagepath of the specific profile i wanted to merge with the directory then upon logging back on it completely wiped all data in that directory and started fresh.
Now that you have a brief oveview of my situation my real challenge is HOW do i install windows and merge a user profile to a different directory.. Mind you i have overseen winPE and unattended etc. but that seems more corporate and just seems like more steps to do and im still not 100% sure how to get it working, it also seems like that approach will not install all components and drivers etc. that a normal windows installation would do.
hard drive 1: (vista)Plugged the hard drive in, the start up screens and the bios both recognise it, yet under 'My Computer' and when trying to install vista on it, it wasn't showing up when asked where I wanted to install vista to. I'm positive I have wired it up properly as there's only 2 wires which are completely different from one another. I do have with me the original installation disk that came with the PC also.
hard drive 2: (windows 7)Same sorta situation with the PC not finding it really. Though his PC only has enough power connections for the 1 hard drive and he wants both at once (there's 2 power connections that fit, but the other goes to the CD drive) Also in the 'cage' bit there is only room for 1 hard drive. also I can't seem to make a installation disk, when I have the old hard drive in, it created a repair disk, not installation disk.
I want to make a 100% automated Windows 7 installation. (Literally 100%, meaning you do not have to know anything to install it) You only need to put the DVD into the DVD Rom and restart the computer and it will automatically:
1- Boots the computer from the DVD (No need to set the DVD Rom to the first priority)
2- Formats the drive C:
3- Installs the windows and drivers and some software
I know how to do part 3, but I'm not sure about parts 1 and 2.
No install disks, no manual just letter telling me to protect customer data entire drive was wiped clean including Recovery partition. Checked disk management it shows all 4 primary partitions used: 200mb (boot), 169gb (C drive), 281gb (D drive), 16.5gb Recovery partition. I tried F9 when booting (nothing) just boots into OS. This setup is completely useless to me. Called Asus ($50.) for install disk they said call Microsoft, call Microsoft ($99. new disk) they said call Asus, I've already paid for Win 7 once and i'll be damned if I pay for it again. Typical corporation bullshit.What I want to do is install Win 7 on 1st part, 2nd (shared NTFS part), Ubuntu on logical partitions.
I have just built my first pc, and I am stuck at installing windows 7 . Here's what happens, I am trying to install off a USB stick as I don't have a dvd drive for this build. It will load into the setup and it'll stop on a screen requiring me to load drivers.
Here is what it displays: "A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now".
So I found drivers for my mobo Asus M5A97, I select them and then after I click next this message appears: "No new devices could be found. Make sure the driver files are correct and located on the driver installation media".
I don't know what to do! I've tried all I can think of!! Nothing seems to work! I am trying to install windows 7 Ultimate 64 bit, I've tried installing windows vista 32 bit, and its been saying the same thing as well! I found the drivers here: [URL].
I wanted to use my 180gb ssd as a boot drive and I do not know what to do. I installed windows and some drivers on the hdd but i want to start over and I need some guidance.I am doing a clean install now. once thats done how do i make the ssd the boot drive to make my system scream! also will i need to put drivers on both hdd and ssd?
I have two hdds (500gb 7200rpm) in my laptop and have 260gb of data on the second one. I wanted to create a partition for games at the beggining of the 2nd drive (the left side) as i heard it increased performance to put games in anoher drive and at the beggining of the drive.Will it make difference to make a partition at the beginning or at the end of this drive when it comes to gaming performance?My cousin showed me one game in the same drive installed in the 1st of four partitions of a 500gb 7200rpm (the same i have) performing with 3-5 fps more than that game installed in the 4th partition of that same drive....
It will get as far as "expanding files" then stop at 0%, with an error saying "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation." I have tried it with multiple iso burns on different dvds from the download I got of it, redownloading it from the official downloader, and now have tried the dvd that came in the mail, to no avail.
I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
I have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
I just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off.sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes.whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc
So i have a new SSD Corsair Force 3 240 gig and all I want to do is install Windows 7 Pro on it. This board does not support parted magic (cannot wake from sleep and there are no onboard video to wake up to) so ive resorted to clean all.I have not been able to successfully boot the OS on the SSD. I never intended on setting up raid but apparently all the literature i see is on raid. I created a USB install disk as reccomended onto a 8gig ntfs primary active did the bootsect /nt60 X: and it successfully worked copied the cd over to the flash drive and copied the rste drivers in a folder called drivers My SSD is installed on port 1 6gig sata intel (as this board doesnt have marvel apparrently) My DVD is installed on 3gig Sata port 6 I set up Raid in the bios as reccomended by others (as this is the only way to install ssd?).
Nothing UEFI is enabled There are no other drives hooked up to the computer. Just SSD, USB cordless mouse, keyboard and no network cord or WIFI i started with a clean ssd as reccomended my bios recognized the ssd on post i booted into the win 7 install (MBR not uefi) i loaded the 64 bit rste drivers from asus as reccomended by others i left the machine to install the usb then booted into windows install (for whatever reason) i pushed f8 to boot my corsair windows brings up an error on a black screen File: windows/system32/drivers/adpahci.sys driver did not load Status: oxc0000221 Info: Windows Failed to load because of a critical system driver is missing or corrupt
First, my laptop is a Aspire 5250-BZ853. I received it back in October, I think...may've been earlier. But anyhow, it was working just fine yesterday until I did a Windows Update. I had to restart, and it was fine again. But then it began running sluggishly slow, and just terrible overall so I restarted it once more and that was when the problems began.
This entire day, this has been driving me nuts. I have important files on here, and I backed up most on my external harddrive a bit ago but there were a few I missed and hadn't the chance to get (ironically enough the most important, papers and such.) At first, it said my password was wrong -- as if someone had changed it! I restarted it once more, thinking it an error or something, and did that again so I restarted it again. Finally, it worked but I think it logged me in as safe mode somehow. After that, it restarted on its own and began this loop. I did a LOT of searching on Google until finally someone suggested to someone else to try pressing "ALT + F10" I think it was as it was starting, and finally I made progress. Before that, it was just going into a constant rebooting loop and I couldn't even log into safe mode. Trying to reset it back to a time it was working was futile, because it said there was no recovery time there! So that shot that idea down. At last, I got somewhere.as well. I clicked the reset to factory settings, but still keep all the files (and they would be saved to "C:Backup" and I thought it had finally worked. But now as it reinstalls, I got an error saying something about how it needed to restart or something...so when I clicked "okay" it began again, and finally it all just came to a stop on "Windows could not complete the installation. To install Windows on this computer, restart the installation."
bought laptop, its loaded with win 7. i hate it, its horrible i cant find anything. havnt worked out how to make it look like traditional windows like xp. i am silver surfer, like gadgets but all i know i taught myself.
I want to take my Windows 7 from 32-bit to-64 bit. I know that to get from a 32 bit OS to 64 bit you have to do a clean install. Problem is, i upgraded to 7 from Vista about a year ago using a 32 bit version downloadable installer so there's no discs with 32 and 64 bit version. So I guess my real question is can i use a 32 bit upgrade version's key on a 64 bit non-upgrade version? I could download a 64 bit version ISO and do a clean install with that, right?.as long as the key i already have would work?
Someone want to explain how the hell you make a bootable ISO from these leaked builds?
Everything I try is FUBAR.
Edit: Okay..nevermind..I Frankenstein it and figured it out finally..I just copied the install files onto my USB flash drive and rebooted and set to boot to USB drive.
No need for an ISO
Edit 2: ...Okay..I give up..I get an error during install saying Windows can't install the required files. The file may be corrupt or missing. bla bla
Anyone else getting this with the 32bit leaked copy that just came out?
i recently acquired a virus that i've now taken care of, but it seems to have left my computer damaged. i can't change my wallpaper, for one. and whenever i save or upload something (for example, when i want to upload a video on to Internet and you get that window pop-up where it gives you the option to upload something from a certain location), the location for desktop is completely missing when i use one of my browsers - i can't access it at all.
i've also noticed recently that i can't even make changes to my desk top icons. i arrange it by date -for instance- and when i restart the computer, it goes back to the way it was before the change?
Maybe it's a stupid question,but I can't figure it out how...?
At this moment,I have Win 7 buil 7000 32 bit installed,and I want install x64 version,so I have downloaded Windows 7 build 7048 x64,but it's not a bootable ISO file.
I managed to make an ISO,but have never did and don't know how to make a bootable ISO file,I have already tried several programs(PowerISO,MagicDisc,ImgBurn,Nero 8),but every time I burn an image on disc,it doesn't work.
If there is someone who is willling to explain me correct way step by step,I'll be really greatful.
I know what you`re thinking: "why don`t you just go for Windows 7 x64 ?". Belive me, I did... or at least, I tried. But I was overwhelmed with BSOD's which I was unable to fix. I posted a thread *here* about the BSOD's, sadly I couldn`t get rid of them. Long story short, 2x2GB=BSOD, but 2GB=OK. Now I`m not gonna sit with a 2GB stick on my shelf. So I`m willing to give up on x64 and just go for x86 (haven`t got around to installing x86, will do that tomorrow; hope it runs ok with 2x2GB RAM installed, otherwise I`m gonna go completely crazy).
Anyway, since x86 only shows 3.25 or 3.5GB out of 4GB, I found a very interesting article about doing something about this. *This is the link* to the article. The instructions on how to tweak Windows start from the part where it says "Patch Details" (around the middle of the article). I`m not a programmer, but I read the whole article and I pretty much understood what he`s saying. I am to understand that the file NTKRNLPA.EXE needs to be modified, but how? With what am I supposed to open it? BCDEdit is used later on, so I don`t think is that I need to use at first. Basicly, I don`t understand with what to open the file.
I just bought ASUS Xonar DS to make my HTPC connect to Samsung HT-Z210 Home theater System via Optic cable (TOSLINK).I can Play DVD with out any problems with sound.
just installed windows 7 ultimate because my old hardrive packed up on me, and now i find that my direct3d- directdraw-& agp acceleration are not available, can anyone advise me on how to enable them. enable & disable function not listed in my directx display.
I downloaded OFFICIAL Windows 7, but there is no ISO file so how do I make it bootable? There is a setup.exe file but since i have VISTA 32 bit i cannot clean install to W7 64 . So what do I do?
I ignored the warning that permissions may not allow me to make changes because I thought I had all the correct boxes checked. Now I cannot see my C-drive because I don't have permission. I can no longer get into the permissions folder or anything else to make changes. Can the files that control this be deleted without destroying the whole registry?
