How To Install Windows 7 To E Drive
Apr 18, 2012I have partitioned my HDD c drive has os win7 64 bit I want to put win7 32 bit to e drive which is the partitioned
View 3 RepliesI have partitioned my HDD c drive has os win7 64 bit I want to put win7 32 bit to e drive which is the partitioned
View 3 RepliesHow do I install a Super Multi Drive to a mini computer HP 110? I have the device and the installation disk, however, the computer does not seem to be detecting it or providing an installation wizard for me to proceed.
View 3 Replies View RelatedInstall LG Super multi drive install disc for windows
View 1 Replies View RelatedI have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in.
My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have Windows 7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)
I have a new copy of windows y 64 bit ultimate. I currently use w7 64 home premium and it is on C drive and the drive is a sata 2 drive. But when I build my new system I want to install onto a new drive which is sata 6.0 and I have made a partition on that drive (letter M) for the O/S to be installed onto ( ive allowed 150Gb ).
So my question is when I build my system and am ready to install w7 can I install onto drive M on the new sata 6.0 drive?
I will unplug the old boot drive as I understand windows will boot to that if I dont unplug it, then when I have installed new O/S on the new drive, partition "M", I will plug it back in and format the old boot drive.
So then windows will boot to drive/partition M, if that works, and C drive will just become a data drive. I understand I probably will have to do some messing in bios, so any help with that will be good.
this will be my 1st build but I am not to bad with computers and have changed cpu's/HD's/gpu's/fans etc etc. but not mobo's and cases. And never changed a O/S onto another drive with a different boot drive letter.
I have a Gigabyte 880GM-D2H motherboard. I am trying to install Windows 7 on a separate SSD drive(OCZ-Vertex3) but Windows does not see this drive, but it is listed in my BIOS..
View 1 Replies View RelatedCheck my Hardware specs for full information
Current setup:
C: Boot, Corsair SSD
D: Files, samsung HDD
D:/boot files/user/(all user account directories moved here, when possible) I'm wondering if it's possible to install games such as Assasins' Creed or Skrym, but install all game data to this folder?D:/boot files/programs/* Many installers allow you to define a custom installation path, But I am unsure if these games would ask for one or force me to install to the default directory?
After "C" disk partition, I installed Win 7 in "C" drive. How can I install Win XP Pro in "D" drive?
View 2 Replies View RelatedInstalls from a flash drive tend to take about 75% of the time it takes with a DVD. On my C2Q Q6600 it meant 20 mins instead of 29.This is for those who are having issues with running from a DVD, or just want to try it out/get it done faster.Back up the files from your USB drive, as it WILL get formatted in this process and all data on it will be lost!
1. Get a USB Drive, it must be at least 4 GB.
2. Plug the drive into your PC.
3. Open a command prompt as administrator. (Right click, Open as Admin, or Ctrl+Shift+ Click)
4. Get the drive number by typing:diskpart list disk On my machine the USB disk was number 1.
5. Format the drive by typing:
-select disk 1
-clean
-create partition primary
-select partition 1
-active
-format fs=NTFS
-assign
-exit
6. Mount the Windows 7 beta iso or insert the disk.
7. Navigate to the boot directory cd E:oot (Where E is the drive letter of the DVD)
8. Using bootsect, we’ll make the USB drive a bootable NTFS drive, ready for a Windows 7 image: bootsect /nt60 F: (Where F is the drive letter of the USB Drive)
9. Close the command prompt
10. Copy the installation files from the mounted Windows 7 iso/disk to the USB drive.
11. Reboot the PC, and enter the BIOS (OR you can move to the boot manager menu, usually by pressing F10 if supported)
12. Set the boot priority to boot the USB drive first.
13. Install Windows 7.
I have windows 7 home prenium oem but I cant install it, nothing happen when I boot on dvd, I tryed on another dvd ide and didnt work either, I looked if I could see windows 7 files in windows xp explorer but It seem to not be able to read the dvd, I tryed to read others DVD and CD and all work fine. I even tryed another windows 7 DVD and same result, also the DVD drive make weird noise as if it has trouble to read it, like you know when you put the dvd in wrong side (no I didnt ),I tryed updating my DVD drive firmware but is up to date.
DVD DRIVE: PHILIPS SPD2414T (IDE DRIVE SET ON MASTER)
CPU: Intel Pentium E5200 @ 2.50GHz
Memory: 2.0GB Dual-Channel DDR2 @ 400MHz 5-5-5-18
Motherboard: Gigabyte Technology Co., Ltd. EP41-UD3L (Socket 775)
HDD: 244.20GB Seagate ST3250310AS (SATA)
can i install windows 7 from pen drive and can we create bootable pen drive in windows 7
View 5 Replies View Relatedi know this is possible but could i install win xp then update it then Windows 7 all on the same ide and if so how would i set the drives up physically and inside the bios are even clone my 320gb hdd to my 80gb hdd my 320gb hdd has 284gb free space if cloning is possalbe i could then remove the dvd drive if not even clone create a usb Windows 7 installer never mind think i found a tut on it USB Windows 7 Installation Key Drive - Create
View 9 Replies View RelatedI have a Gigabyte GA EP-45-UD3P motherboard and would like to know if it's possible to install Windows 7 on an HDD with GPT partition tables.
View 4 Replies View RelatedI�m trying to install Windows 7 on my backup computer. I initially installed it from the setup but the C drive is too small so I cannot install other programs so I want to install it on a larger hard drive. I have a larger hard drive that I formatted but I can�t seem to install Windows 7 on that drive. If I remove the C drive where the original one is installed and replace it with the larger drive I can�t boot from the reformatted C drive. I created a recovery disk and can make some progress but it still won�t let me install Windows 7 on the almost empty disk.The setup says it is the secondary not the primary and I can�t seem to force it to be the primary although it is recognized in the setup. If I put the original disk with Windows 7 back in I can boot up and run the install but I don�t think there is a way to install it on a drive that is not the C drive so that The larger drive is then visible and I can open the few small files I put on it as a test so I know the drive is ok. I tried putting the restore files on the larger disk but that doesn�t work.
View 2 Replies View Relatedam a total newbie so please explain from everything from the starting.
View 6 Replies View RelatedI have an existing XP 32 bit PC and want to install Win 7 on a new Drive and do a dual boot- will the Win 7 OEM Activation work- considering I have never installed Win 7 OEM or other on this Motherboard.I want to build a new PC but funds are slow in coming so I figure i would buy a little bit over time in next 4 months and just buy a new copy of Win 7 OEM version when i build the new PC, Motherboard, graphics card, Case, PS etc and then Sell the old PC.
View 9 Replies View Relatedmy dell laptop crashed. i am reinstalling the drivers using a dvd installer. but the laptop says the boot cycle is f and is asking for a command line. i dont know that much about computers so what will i do next
View 3 Replies View Relatedand it was the drive that my operating system was installed on. When I bought Windows 7 I bought the Home Premium Upgrade pack. Now the drive is dead how do I re-install Windows onto my new drive?...if no other Windows software is on my computer which it isn't now the drives dead it won't allow me to install Windows 7 will it?...
View 4 Replies View RelatedI have windows 7 installed in my system. I have two partition on my hard disk (C,D). Windows 7 is installed in C drive. In D i have kept my personal data (Songs,movies etc). 81GB free space is there in D drive. I want to install XP in D drive. Can I do that?
View 14 Replies View RelatedI recently built a computer and was in need of a operating system. My good friend had an extra and burned it for me on a usb flash drive. Is there a way for me to install a oem on an empty brand new desktop with a.usb flash drive?
View 8 Replies View RelatedWhenever I try to install windows on my new SSD i get stuck on this screen
[URL]
It does it no matter what i do...
Windows 7 - 64 disc in drive
updated firmware
AHCI on
SSD main boot drive
i have C drive only, i want to install one more drive i.e. D drive
View 3 Replies View RelatedMy HDD got some bad sectors and is due for replacement at service center. So, for using my computer in the mean time I want to install win 7 on my 8gb USB drive and use it as my HDD for the mean time
View 9 Replies View Relatedwhen i install windows 7 on my regular hard drive it is fine. when i try to install it on my ssd drive it says that windows setup could not configure windows to run on the computers hardware
View 2 Replies View RelatedI have a Lenovo ThinkPad t410 laptop and the DVD drive is not working. Since i need to urgently reinstall Win 7, how can i do it from a USB drive? Better if no adicional software is needed.
View 5 Replies View RelatedI have an Alienware M15x and the CD drive will not read anything I put into it. It'll suck the disc in, make the noise like its reading it but nothing happens. I've tried a fixit tool from microsoft and when it queues me to put the disc in it says it can't detect anything. This is a problem because I want to completely wipe my computer and start fresh.I checked my device drivers and everything seems to be fine except for one yellow exclamation mark that says my bluetooth peripheral device is missing. Not really sure if that's the problem but I just thought I'd throw that in there
View 3 Replies View RelatedMy rig recently had a few problems with external hard drive so I decided probably a corrupt windows install and tried to reinstall Win 7. Everytime I try to install, I get to that blue windows 7 background (the one you see during the whole install) and a mouse cursor. I can move the mouse cursor, but it never moves from there. I waited 30 minutes to no avail.
So far I've tried
- Clearing BIOS
- Trying with only 1 stick of ram, with each stick.
- Reseating graphics card
- Cleaning heatsink/grills
Still nothing, it just get's stuck there. I've reinstalled Windows using this same disk, on this same desktop, a good 3 or 4 times. The disk is fine, I also know, because I installed it on a friends PC not even 2 weeks ago (after I started having the problem). I can no longer reboot into Windows, nor install it. Also tried another new hard drive to install it on, same thing.
Specs:
AMD Phenom II 975 BE
8GB DDR3 1333 RAM
450 GTS 1gb GDDR5 (Galaxy)
500w PSU ( I believe CoolerMaster or Hyper... not sure)
M4N68T-M V2 Asus Mobo
Still using my old 160GB PATA drive
I only have an external firewire dvd drive and wondered if there's a way i can install Windows 7 from it. I don't want to overwrite my current XP installation and lose my programs and settings, so would like to install it onto a sepatate hard drive.
View 8 Replies View RelatedI have a brand new hard disk on which I would like to install Windows 7 (Enterprise Edition). I actually want to install the OS to a drive other than C, let's say drive L. Up through Windows XP the following method worked: In the setup, I would partition the drive and make logical drives of the minimum size from C to K, with a final one, L, big enough for the OS and everything else. I could tell the install program to install Windows in L. A few system files would be in C, all the rest in L. Then after I deleted partitions D-K and fixed a line in C:oot.ini to compensate for that, everything was fine.
In my brief experience trying to install Windows 7 on my new drive, this technique does not work. There is no easy way to create logical drives during the install from DVD/ISO procedure and even when I tried creating three small partitions ahead of a large partition as the target partition, Windows still installed itself in drive C. I know it is possible for Windows 7 to install itself to other drives (I've read other posts where people have complained about this), I just don't know how to force Windows to install itself on a drive with a specific alternate letter.
cna i copy my windows 7 cd (dvd) to an internal hard drive and install windows 7 to another internal hard drive without the need for a disc? Windows 7 is the only time I have used physical media for a long time and would prefer to not have to use it. I understand you can store an image of a working system and restore it but what about a clean install?
View 2 Replies View RelatedMy PC is currently using a single RAID 0 drive that contains my Windows install and all my data in a single partition C: (I'm well backed up so happy with the risk of RAID0)
The RAID0 drive is setup by my motherboard controller so Windows just sees the one drive.
I am thinking of adding an separate drive for windows, hopefully an SSD. I would like to do a fresh install of Windows 7 on the new disk then rename the old RAID0 drive to something different such as D: . Then reorganise it into just a data disk.
My question is.. will the new Windows 7 installation just see the old RAID0 disk as another disk? I know this would work witha normal disk, but does RAID0 transfer over to a new installation ok?