i have just had to reload my daughters laptop but i now have no drivers for her wireless so cant connect to net to update them, does any know how i can get drivers for it, both ethernet and network controllers have no drivers ?
View 14 RepliesI reinstalled windows 7 and upgraded from 32 bit to 64 bit. everything went well but my drivers for the ethernet, network, and pci simple communications controllers are not installed and i can not connect to the internet. please help
dell vostro 430
windows 7 64 bit
I am a student living in student accomodation, in a hall with 4 others. However i have to connect my Windows 7 PC through ethernet, which is fine, but then all our wireless devices can't connect as there is no WiFi. So i set up an Ad-Hoc network on my PC (i have a wireless USB). I was able to set up the network and find it on my wireless devices but unable to connect to it.
View 4 Replies View Relatedfrom where can i download hp ethernet cable driver
View 2 Replies View RelatedAbout two months ago I had some money problems and was forced to move in with my dad. I have a 20GB Xbox 360 and Xbox Live. I knew my dad had the internet so I could still use Live.I have been doing so via an Ethernet wire going from my laptop (connected via wireless to the router) to the Xbox.
View 2 Replies View RelatedI'm running Windows 7 on my laptop for some time now, and I am really satisfied with it.
I have just one thing bugging me, since I can´t get it to work as it should.
Windows has recognized the "Ethernet Controller" and "Network Controller" as USB devices (therefore I can "Safely remove them").
I was wondering if any of you guys is going through something like that or have any clue on solving this issue.
Okay. I am new to computers, I just hated vista with such wrath that I printed out everything ever to computers and updated to windows 7.
I had vista 32 bits, and all my drivers were working correctly when I upgraded to windows 7 32 bits. But I decided to upgrade to Windows 7 64x because I found out my computer has additional RAM that wasn't being used by the 32x OS.
When I did this, I had to install some new drivers, which I figured out by putting in my ASUS driver cd and then from device manager I would search the ASUS driver cd for correct drives.
(The ASUS Driver CD wouldn't work, it would tell me my operating system (obviously) wasn't vista, so I had to use the driver folder in it manually)
So, I can connect to password-less wireless perfectly, like my neighbors, but my work's pass-worded network it says connected but I can't actually go use the internet. Same with when I plug in Ethernet, it will tell me I'm connected but no internet.
I read around the internet and it said it has something to do with drivers. I tried downloading 64x versions of my drivers but I had difficulty using and installing them,
Here are my Network cards:
Atheros AR928X Wireless Network Adapter
Bluetooth Device (Personal Area Network)
Bluetooth Device (RFCOMM Protocol TDI) (Pretty sure bluetooth doesnt relate to my internet but whatever)
Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20)
Each time i load up my computer everything is running nice and smoothly when i start to open up alot of things that uses internet (or simply play a game) all of a sudden my network card dies and starts saying "An Ethernet cable is not plugged in" blah blah. Anyways the cable works 100% I've tried about 6 different cables all resulting in the same thing..
I've tried updating the driver that still didn't fix
I've tried uninstalling the network adapter and reinstall didn't fix it
I've disabled Ivp6 thingy still doesn't fix it
I'm connected to a Router/homenetwork using a REALTEK PCIe GBE Family Controller and computer specs are in my profile.
I've been having this problem for weeks now and haven't had any luck fixing it. I'm having an unidentified network issue on my desktop, which is running Windows 7. I know it SHOULD be working because I've tried plugging the cable into my laptop and disabling wi-fi, and that works fine.I'm currently on my university's network, and this only started when I first moved in this semester. My ethernet was working fine when I was at home over the summer, and when I was at school last semester. I'm able to obtain an IP address, and I'm able to ping 127.0.0.1 and my IP address successfully from the command line. Based on reading tons of other posts, I've also tried.resetting TCP/IP. dnsflush disabling IPv6 uninstalling Bonjour reinstalling drivers for my onboard network card (mobo: ASUS P7P55D-E LX, Realtek PCIe GBE Family Controller)resetting the CMOSbuying a new Intel NIC http://www.newegg.com/Product/Product.aspx?Item=N82E16833106033) changing the "Link Speed & Duplex" setting for both cards (tried 1.0 Gbps full duplex, 100Mbps full and half duplex) changing network settings to automatically configure unidentified networks as private networks instead of publicrunning virus/malware checks I'm really at my wit's end for what else to try here. I thought buying a new NIC would do the trick and it was a last resort for me, but even that hasn't worked.
View 13 Replies View RelatedIn our office we have our PC's connected to our inter-office network server via the Ethernet ports (Local Area Connection) with a hard wire to a hub, that in turn runs to our server. We also each have a wireless internet connection on our PC's via a USB wireless adapter. When we were using XP this was not a problem to have access to the server AND the internet at the same time.
When my PC died last year I bought a Dell Inspiron 560 slim tower with Windows 7 to replace my XP machine. The first problem I ran into was that I could no longer use the wireless internet connection AND the hard wired connection to our server operating at the same time. If I stayed connected to our server, I will not have a wireless connection. If I go into the "Local Area Connection" properties and "disable" the connection, I almost instantly get my wireless connection back. The big issue when doing this is if I leave our database program (ACT!) open while the server connection is disabled, I have to shut down ACT!, then restart it before I can connect it to the server. If I try to without closing and reopening it I get all kinds of errors.
So, in the mean time, I have just put a shortcut on my desktop that allows me to enable and disable the Local Area Connection when I need internet access.
A couple days ago, my boss's PC grabbed a virus that slipped past McAfee (that program is now gone!!) and really hosed up his PC. He bought the Windows 7 upgrade software and wiped the hard drive and installed Windows 7. He is now having the same issue as I am.
For what it's worth, he is using a Belkin Wireless-G USB wireless adapter, and mine is a Netgear Wireless-N USB adapter.
Is there any way we can have the two connections operate at the same time like they did in XP? It really becomes a pain sometimes when we are on the phone with a client and we need to jump back and forth between info that is online, and info that is on our server that we access through ACT!.
I tried to allow my windows 7 laptop to print over the network, and after 3 hours gave up as nothing seemed to work. I must have done something because now I cannot connect to WiFi at all or Ethernet. It says on the system tray Not connected and below that connections available, and under wireless network connection it says it is connected to my wireless connection but I cannot connect.
View 2 Replies View RelatedWe have a number of different laptops running Windows 7 and all have the same issue. The very first time a laptop is connected to the company network via Ethernet or WiFi (lets assume we have connected by WiFi) you receive the prompt to choose a network location. After selecting "work" the laptop can connect to the domain and everything works as expected.
Now if the WiFi on the laptop is switched off and the user try's to use the Ethernet connection the Ethernet adapter reports a "Unidentified Network". The only way to get the Ethernet adapter to discover the domain is to disable the WiFi adapter completely which our users cannot do as they do not have Admin permissions on our systems.
My laptop is from Toshiba, model L650 PSK1JA OK3017. Here's Toshiba's driver page for my device: Support :: Toshiba ::Computers, Laptops/Notebooks, Tablets, Televisions, DVD and Blu-Ray Players, Camcorders, Storage, Accessories, and moreI recently purchased a blank hard drive along with a copy of Windows 7 Ultimate 64 bit. I've installed all drivers listed on the page for a 64 bit system but when I try to install the "Intel Wireless LAN Driver (For Intel Model Only)" driver or Proset driver, the driver extraction begins, ends, but when the setup is meant to run, nothing happens. I've redownloaded it and attempted to install it twice to no avail.Basically, I cannot connect to the internet and Windows cannot detect my network adapterI can't call Toshiba support because their operating hours are when I'm at school.casionally, when I try running the driver I mentioned before and the extraction is complete, when I select "No" as to whether I want to run the file, Windows gives me the error: "Archive Extractor -- Error occured in system module [-135]".
View 1 Replies View RelatedBasically I reinstalled Windows 7 (Home Premium if it makes a difference) and wiped my hard-dive to attempt to get rid of a virus that made my computer crash constantly on start up. It didn't work, but that is beside the point. Now I'm getting driver errors about my Ethernet and Network Controller, and I can not connect to the internet with wireless or cables. Apparently I have WAN Miniport Network adapters and no other Network adapters.
View 1 Replies View RelatedI did a windows 7 clean install on my HP Mini 210 4051 nr as part of creating a dual boot with Ubuntu. In Linux the internet works fine, but in Windows 7 it does not. In the device manager I see yellow flags over the ethernet and network controllers. Code 28 (My model does have an ethernet port).
Because the machine cannot connect, I downloaded all the related drivers (everything from the network tab) from the HP website for my model with another computer and then put them all in a folder on the Mini's desktop via USB. When I try to install the drivers through the device manager, and direct it to that folder, it says it finds nothing usable.
Here are the IDs
Ethernet Controller
PCIVEN_10EC&DEV_8136&SUBSYS_338D103C&REV_05
Network Controller
PCIVEN_1814&DEV_5390&SUBSYS_163610C&REV_00
I have Brother MFC7340 printer connected to my HP home premium Windows 7 64 via a USB port. There is no ethernet connection. I want my Windows XP computer, connected to the local home network via ethernet hard connection through my wireless router to be able to print either with a hard connect or wirelessly to this printer. I am having trouble figuring out what to do and have tried various strategies to no avail.
View 1 Replies View RelatedFirst some info: Windows 7 Professional x64, Intel x58 Chipset So, looking in my device manager I've noticed that a lot of the stuff are not updated.i.e.: [URL] The date is still June 2006 According to DriverEasy they need to be updated: [URL] Other devices include the devices like these: [URL]First I tried to do the automatic update through device manager, but Windows insists that these are up to date.So then I went here: Intel� Driver Update Utility Ran the auto detection and installed everything it says I needed. These are still not updated.Then I grabbed the download via DriverEasy, and placed the Windows 7 version of these in a folder, then pointed to them. Update still say the current drivers are up to date.
View 4 Replies View Relatedhow can i change my pc controllers configurations for example my pc recognize button 3 as button 2 and so on..i opened the controller configuration panel but when i press button 3 it shows button 4...
View 1 Replies View Relatedumm, the problem started when i bought a china game controllers it worked perfectbut some new games only supports the xbox game controller o my question is is there some kind of a program that will make the game
View 4 Replies View RelatedI want to buy a controller that will work with new games that requires Xbox 360 wired controller. I bought a cheap Chinese controller but it works on games prior the year 2007. New games like Borderlands, Call of Duty cannot be played with this controller. I saw Logitech F310 controllers which looks good but not sure if it works on these games. which games can be played with controllers.
View 1 Replies View Relatedneed download universal serial bus controllers
View 1 Replies View RelatedI'm using Window7 RC 7100 , after clean installation and while connection my game controller i went to control panel but i couldn't find Game Controller Setting ? is it hidden if so how to make it visible and if not how can i get it.
View 9 Replies View RelatedCan I use two Wired Xbox 360 controllers to play games like Fifa 12 & Virtua Tennis 4 multi-player with a friend locally? I've read you can do it with the wireless controllers but I cannot find any evidence on using two wired ones.
View 7 Replies View RelatedMarvel not showing up in device man - storage controllers?
View 9 Replies View RelatedI'm running Windows 7, 64-bit on an Intel Corei32100T processor on a Gigabyte H67A motherboard with 8gb ram, connected via HDMI to a Sony Bravia. No sound or video card as its all on the processor. I want to set up the system to record a line-in source for (1) my turntable and mixer, and (2) interface for my guitar and microphone. My device manager shows both Intel(R) display audio and Realtek HD audio. Clicking on the speaker icon in the notification area brings up the Intel display audio mixer with three sources, the Sony, system sounds and Firefox. I'm sure this is controlling the system audio output. No way to a recording mixer. Bringing up the Realtek audio manager still shows me no way to set recording levels. Since I'm planning to use the pc for recording LP to disc (on my second thousand, now, switching from favorite old programs on an XP machine to the newly built system)and for live recording, properly setting up the basic sound paths in the system before setting up Audacity and Artist One from Presonus.
View 5 Replies View RelatedI need sound, video and game controllers for windows 7 ultimate.
View 2 Replies View Relatedcann't see hard-disk under command
View 2 Replies View RelatedIs it possible to move my Windows 7 installation from the partition (both the Sys. Reserved & OS partitions) of one drive on one controller to the partition of another drive on a different controller, AND have it boot? I know "something" would have to altered, but I'm not sure "what" or "how". Is this even possible without going through a lot of hoops. Specifically I have an installation of W7x64 installed on the 1st partition of the master drive on a PATA controller. I want to move it to the 1st partition of the master drive on my SATA controller.
FROM PATA0 {sys reserved}{OS install}{data}
TO SATA0 {sys reserved}{OS install}{data}
I also have another install on the 2nd partition of my SATA4 controller and want to move it to the 1st partition of my SATA0 controller
FROM SATA4 {data}{sys reserved}{OS install}
TO SATA0 {sys reserved}{OS install}{data}
Previous OS on my Sony Vaio Notebook was Windows Vista, since Windows7 64bits was installed my graphic driver doesn't work and Sony as well as Vaio don't have updates for driver. Microsoft can't recognize driver to update.
View 2 Replies View RelatedI need this driver for satellite C660-B085.
View 1 Replies View RelatedUniversal serial bus controllers driver download code 43?
View 1 Replies View Related