Hard Drive Wont Boot Cd?
Dec 9, 2011got bootmanager corrupted error message the pc will now not boot up at all, and will not accept any recovery disks, I'm running win 7,
View 1 Replies
ADVERTISEMENT
Hard-drive Is Not Seen Upon Boot Up
May 27, 2011This pops up following the DELL logo.Phoenix ROM BIOS PLUS Version 1.10 A07 COPYRIGHT 1985-1988 Phoenix Technologies Ltd DELL DXP051 Series BIOS version A07 [URL]
Drive 0 not found: serial ATA, SATA-0
Drive 1 not found: serial ATA, SATA-1
Drive 2 not found: serial ATA, SATA-2
Drive 3 not found: serial ATA, SATA-3
Strike the F1 key to contihue, F2 to sun set-up utility Hitting F1, all is good. But why does this appear and how do I eliminate this process?
Can't Boot From Hard-drive
May 7, 2011After I got sick of some programs crashing, I decided to install windows xp. i shrinked 1 partition and created a new partition called XP mistakenly under drive A. I shutdown and put in xp disc, selected the newly created partition and chose install there and said not to format as it did when i partitioned. It copied the files and reboted, I took out the disk. The fist screen of my bios now says flopy disks fail (40) or something like that. When I normally go to select an OS, it says hard disk could not be read. I put in my win 7 upgrade disk to try to restore, but there is no restore on an upgrade disk. When in the windows 7 install screen(looking for restore) I deleted the newly created partition. How can I get the computer to boot from hard disk again?
View 3 Replies View RelatedTwo Hard Drive Boot
Dec 8, 2009I have two hard drives in my machine and want to choose which one boots when I power up. One has win 7 64 bit (default load) the other Win 7 32 bit. The 64 bit does not play my games right while the 32 bit is perfect. I do want to keep the 64 bit for my other applications.
View 10 Replies View RelatedWindows 7 Won't Boot On New Hard Drive
Jan 8, 2013My Old HDD crashed, it had windows 7 on a D: logical drive with an extended partition (Not sure why/how I ended up with a D: logical drive and an extended partition, it probably happened when I upgraded my windows xp to windows 7 32 bit OR when I upgraded my windows7 from 32 bit to 64 bit, anyways.....). My old HDD also had two other primary partitions which probably had some system files etc,. I do not have a backup of these two primary partitions, however, I do have a paragon backup of my logical drive D: extended partition alongwith a backup of first track (not sure what that means). My old drive is bad. I got me a new HDD, created a new NTFS primary partition with a drive letter C:. I then restoed the paragon backup of my windows D: drive on to this new primary C: partition. Now, I am not able to boot windows 7. Seems like I need to make this new partition bootable and/or make it a system partition. Not sure how to do this. I dont want to install windows 7 from scratch and then load all the software programs.
View 8 Replies View RelatedCan't Boot New Hard Drive Since Wiping Old One?
Aug 27, 2011and i signed up because Microsoft support rips you off (says they don't know the answer, so they charge you to open a case, which is 1 fee until solved, then 10 seconds later they're like "okay, so this is what you do"). Recently because my computer was getting extremely slow, i bought a new 2 TB 7200 RPM seagate hard drive. I installed it, put windows on it, and for some time it was booting fine, but then i decided i was satisfied and ready to wipe the old OS hard drive to reclaim the space on it, so i did so, then when i rebooted the computer i got an error saying something like "unable to find system files, reboot and select correct device". I then decided i'd try to reinstall or repair windows, but i get this error code when it tries to expand files: 0x80070017. Now when trying to boot from any of my 3 hard drives it says "bootmgr missing" I'm quite sure there were no viruses on the machine, though it had been a couple days since i last scanned.
View 2 Replies View RelatedHard Drive Wont Boot
Jun 29, 2012First my motherboard is a gigabyte x58a-ud3r. It has a i7-930 in it, not over clocked at the stock settings. It has 6gb of ram (right now, it should have 12 but I have taken out 3 sticks cause I thought that might have been the issue) Recently my hard drive which was a hitachi deskstar crashed on me, it wont boot, even a clean format makes it keep restarting or giving me the bootmgr missing error which even after i use the windows disc to do repair it still is in a restart loop. I put in my windows 7 install dvd and it formatted the drive and installed windows 7 just fine. Then I was doing updates and it did it, it was like 66 updates or something as far as I remember and it had to restart. Right here when it restarted is when the trouble began. It now is just restarting non stop, goign to the verfying dmi data and restarting. I cant get it to boot in safe mode, not while using the windows 7 install dvd.
View 9 Replies View RelatedDual Boot With New Hard Drive
Oct 23, 2009I currently have a system running XP with two IDE hard drives and 3 partitions.
I have taken Windows 7 as a chance to get myself some much needed extra space! and purchased a new 1tb SATA drive.
I really dont want to lose the exisitng data I have so my original plan was to take my main IDE harddrive with most of my data stick it in an external USB carrier and then start fresh in the system with the 1tb and Windows 7.
What would be cooler would be if I could add the 1tb to the exisiting system and install Windows 7 on that (ideally with that as C and either then have much quicker access to transfer data to the new drive or even dual boot with XP at first incase I have any issues with Windows 7. Can anyone advice me on how easy/risky this is? And what they would suggest to someone trying to maximise the uptime of their PC?
Installed New Hard Drive - Won't Boot From CD
Nov 24, 2009I just installed a new WD 500 GB hard drive into my DELL computer. I am trying to install windows 7 from a dvd but it will not boot. Does anyone know what the problem is.
View 8 Replies View RelatedBoot Problem With Second Hard Drive
Dec 3, 2009I had XP installed on a single hard drive. I bought a second hard drive and installed Windows 7 on it. After formatting the old XP drive, I could not boot. I tried bootrec and the built in startup repair, neither worked. I ended up having to install windows 7 again on my old drive. Now when the OS choice pops up, my original 7 install is considered "recovered". How do I make it so I can format my extra drive and still boot?
I can't just wipe them both and start over because I would lose all my music, documents, etc.
Boot From A VHD (Virtual Hard Drive)?
May 12, 2012i was wondering if it is possible to boot my computer from a vhd and add it to the boot menu. I do not want to dual boot, I am trying to use the vhd like a dual boot. I am running Windows 7 Ultimate x64.
View 5 Replies View RelatedFaster Way To Boot From Hard Drive
May 19, 2011So I just purchased a SSD and put Win 7 on it. All is fine and dandy, but I still like to visit my Vista instance on the old hard drive. It appears that the only way to switch between which hard drive & OS to boot to is to go into the BIOS, rearrange the boot sequence, and then reboot. This is rather clumsy and time consuming IMO. Is there a faster way to choose which hard drive to boot from? I've looked into "dual booting" which will prompt the user with a simple menu to choose which OS to boot into. This is exactly what I want. The problem is that it appears this is only available when both OS's are on one hard drive, which is not my situation.
View 3 Replies View RelatedHard Drive Won't Boot After Post?
Mar 25, 2012After removing a virus with malwarebytes the next day the computer (Dell studio xps running Windows 7 64 bit 8Gb) will post but then goes to black screen with blinking cursor and continuous beep. Removed and reset memory, CMOS battery, etc. BIOS sees the SATA drive. Booted from Win 7 disk - recognized the hd but disk repair did not work - was able to restore to a restore point, but after reboot, same thing. Finally took out hard drive and placed in another Dell computer to see if it was the drive or something else - it's the hard drive - computer sees it, but after post goes to black screen. Attached to my Mac and was able to back up files, but would really like to be able to repair windows to keep programs
View 2 Replies View RelatedInstalled New Hard Drive With Windows 7 - PC Will Not Boot Up
Dec 10, 2011I recently bought a new hard drive with windows 7 home premium 32 bit installed. When tried to install it in my pc it would not boot up, I am assuming its because everything is new to it. I bought a windows 7 recovery disc but it has not worked. I did not get an install disc with the new hard drive.
View 5 Replies View RelatedWindows Won't Boot After Old Hard Drive Erase?
Jan 20, 2013I have a dell dimension 9100. I have two drives on it, a ~160gb drive that came with it with xp, and a 500gb drive with win7. I put the win7 in myself and had been using that. Finally, I decided to erase the old drive with xp on to install linux on it. After erasing the old drive, my computer won't start up. It says it cant find sata 1 or 3. I've tried switching the cables hooking up to it but that doesn't help. If I push continue after it tells me how it can't find them, it says 'loading pbr for descriptor 2...done' and stays there. I did not erase windows 7,
View 4 Replies View RelatedAdding Hard Drive On Windows 7 Will Not Boot?
Jun 4, 2011So, I've added a second hard drive to my Windows machine and now it will not boot up. I added the new hard drive on SATA 3. The original is SATA 1, and my DVD is SATA 0. This is how it's always been; I've changed nothing else. I don't have any idea where to start fixing this. I have a dual boot with Ubuntu on the same SATA drive 1, and that boots just fine. I switched on the new hard drive in the BIOS, and flipped a few other options on and off to no avail.When the computer boots I choose the Win7 install. Then it will take me to a screen that asks me if I want to start windows normally, or do a disk repair. Starting normally gets you nowhere, it will just end up resetting the computer. Starting the disk check will do a scan for a few minutes and then ask me if I want to send an error report. Clicking yes or no doesn't seem to matter because after that the only option is to shutdown or reboot.When this first started I at one point had the option to do a system restore, but I didn't think it was necessary so I didn't. I no longer receive that option or I would try it at this point
View 2 Replies View RelatedGet Files Out Of Hard Drive If Computer Will Not Boot?
Mar 19, 2012I decided to built a new custom made computer and would like to know if I can just attached the old sata hard drive to the new motherboard?I read that I have to have the same motherboard for the hard drive to work or else it will reformat the hard drive, is this true?
View 2 Replies View RelatedHard Drive Seek Failure / Does Not Boot
Apr 30, 2012I've got a Dell desktop that will not boot, gives the message Drive 0 Seek Failure.I was able to boot to a linux disk and copy files, so the drive is spinning. I ran the built in Dell hard drive diagnostics, the hard drive passed. I also ran the Hitachi Drive Fitness test, and it passed.I assume maybe it just needs some repair to the boot sector?
View 9 Replies View RelatedDual Boot With External Hard Drive Or USB
Dec 30, 2009I have a Dell Inspiron 1440 laptop with Windows 7 Home Premium 64bit. Some of my older applications do not support this platform. My processor does not support Window Virtual PC and Windows XP mode so I was hoping to add XP as a dual boot. Is it possible to boot XP from an external harddrive or USB instead of having to partition the internal hard drive. Or do you have any suggestions on how I can load XP after Windows 7 is already loaded.
View 2 Replies View RelatedSecond Hard Drive - Windows Stuck A Boot?
Dec 28, 2012I found another old hard drive, a Seagate 250 GB, and when I plug it to the pc, Windows is stuck at the Windows 7 logo at the boot, and the logo itself lags. the hard drive is detected in the BIOS. (can it be a virus on this old hard drive?)
View 9 Replies View RelatedBoot Install Files From Hard Drive
Apr 28, 2011I wish to have a method to install windows 7 (Or any OS for that matter) from a hard drive that contains just the installation files. I am aware of creating system images, ghosting and that whole scene but it's such a long winded process compared to just burning the CD again (Original is in storage and no I don't want to go get it ).
Pretty certain this can be done with some kind of DOS program that is loaded from the drive: When it is selected as primary boot. However, I have no experience with programming DOS applications, or if this is even possible (Pretty sure it is given DOS boot rom's exist).
[URL]
Windows 7 Won't Boot With Second SATA Hard Drive?
Jun 28, 2011I've recently purchased two 30GB SSDs which I have set up in a RAID 0 array and I have installed Windows onto these drives. I have a second, 2TB Seagate Barracuda Green HDD that I have used to put my user profiles and additional programs/games on as it wouldn't fit on the SSD.Everything was fine for a few days after installation. Then this morning I rebooted the computer and it just stalled on the flashing cursor (underscore) in the top left corner of the screen. I did the basic fixes (Windows repair, checking RAM) and nothing worked.Then I thought that I should try disconnecting all but the SSD with the OS on it. SUCCESS! It booted to Windows but couldn't find any programs/user data so it created a new "profile". I shutdown the computer and tried reconnecting just the data hard drive.I have two additional hard drives (used for backups) that don't affect anything at all when I plug them in.Does anybody know what could be the problem? I'm at a loss and I need the computer
View 3 Replies View RelatedInstalled Windows 7 On One Hard Drive / But It Seems To Need To Boot
Dec 12, 2011I have a computer with two (IDE ribbon cable) hard drives. One had a bad windows XP installation on it. I installed Windows 7 on the other. I formatted the drive before installing Windows 7.Then, I decided I want to use the hard drive with the bad winXP installation on it, in another computer (I will format it). When I opened the computer side panel, I wasn't sure which hard drive was which, so I unplugged the power to one, and started the computer.The thing is, it won't boot Windows 7 with either of those hard drives alone, only when both are plugged in. With HD #1 disconnected, it says "Can't find BOOTMGR, press a key to reboot." With HD #2 connected, I get asked whether I want Windows 7 or an older OS, and when I choose Windows 7, I get an error message, something like "Windows 7 failed to start. To try and repair, insert install disc, or use recovery mode, etc" With both HDs, I get asked the same question, "Windows 7 or an older OS," but when I choose Windows 7, it works. In my computer, I have verified that Windows 7's files are on one disk, and corrupt winXP files on the other.
View 8 Replies View RelatedTriple Boot 2 Windows 7 And 1 XP In One Hard Drive
Mar 22, 2012Recently I had a drive failure and I need to have an extra Windows 7 x32. The remaining drive a WD 320gb drive has a dual-boot Windows 7 and XP. How can I triple boot in just one hard drive?
On that particular system I am using Neosmart's iReboot/EasyBCD so when I want to boot to either of the former arrangment I can do that easily and not be bothered by the boot selection.
Now I am using ATI Home 2011 and I was planning to make recover an image from the drive that failed to a 3rd partition on the WD320gb drive. I really need to get this one going in the meantime I do not have the money to buy a new one.
Dual Boot With External Hard Drive
May 1, 2009can I dual boot using an ext. Hard drive. I found an old 250gb phanton hd I've never used. Figured I could throw it in there. Would vista dual boot to that. Or no??
View 2 Replies View RelatedWindows 7 New Hard Drive And Motherboard Boot
Nov 11, 2012My Windows 7 motherboard stopped working so I installed a new motherboard. The SATA hard drive is not recognized by the motherboard software or the Windows 7 installation disc. What the heck?
View 2 Replies View RelatedWindows 7 Will Not Boot With Second Hard Drive Installed
Jan 21, 2013I have a Machine with the Following Config:
Intel E2180 CPU
2GB Ram
Gigabyte GA-G31M-S2C Mainboard
Seagate ST31000340NS SATA Hard Drive Connected on SATA0
Operating Systems:
Windows 7 Ultimate 64Bit on HDD
Windows 7 Ultimate 32Bit Booting from VHD
I Installed Windows 7 Ultimate 64Bit onto Hard Drive as Per Normal Installation Onto the Hard Drive and Installation created 2 Partitions (1 System PArt and Another for C: Drive) Everything Works Great.m I Then Installed Windows 7 Ultimate 32bit Into a VHD. Setup Created a Multiple Boot Entry into the BCD so that when I Boot it Prompt Which OS I Want, I then Used BCDEdit to Change the Descriptions of the Boot Options "Windows 7 Ultimate - 64Bit - HOST" and "Windows 7 Ultimate - 32Bit - VHD" Everything still works Great.. No Problems.. Been Like this for a While Now and Perfect.
Now the Problem is that I Need to get some Data From and Old SATA Drive. I Shutdown .. Plugin the WD1600AAJS (160GB) into Another SATA Port (SATA1).. Turn Machine on and Press Delete to Enter Setup for Bios.. Goto Set Boot Device Priority and Ensure that the ST1000340NS Drive is at the Top (1st Priority).. Exit and Save Settings.. PC Goes through POST and Then Will not Boot.. it Gives "Missing Operating System" Shutdown Remove WD1600AAJS Drive.. Boots Perfect.. Reattach WD 1600AAJS Drive and "Missing Operating System" Tried Using "F12 to Select Boot Option" during POST to Select Boot Device.. Choose ST1000340NS ... and Still same Issue.. Remove the WD1600AAJS and Boots No Prob Off the ST1000340NS.
I thought that maybe it was the WD Drive.. so Tried another Seagate Drive.. and Same Issue..
I have set Every Available Option on The Bios to Choose the Boot Device and NOTHING Works.. I have Even swapped HArd drive SATA Ports .. still no Difference.
I have an Idea there is a problem with the BCD but I Cannot Edit or Add any thing to the BCD as it will not boot with the second drive attached. And When you edit the BCD it need the second drive attached to be able to Add a BCD Entry.
Windows 7 Hard Drive Won't Boot - Cannot Make It Primary
Apr 18, 2012I've had a Windows 7 PC that's motherboard recently broke so I have been trying to use the hard drive with another PC. The PC I'm trying to put it into has all Windows 7 compatible parts. I get to the starting windows screen and it restarts the computer and gives me the option to Launch Startup repair. I launched startup repair and it says that it cannot fix the problems automatically. I can hookup the hard drive as a secondary hard drive and access all of the files on it but I cannot make it primary it just wont boot. The computer that the hard drive originally came from did not include a recovery/install CD.
View 1 Replies View RelatedHard Drive Cannot Detect Without Pressing A Key In Boot Up Process
Aug 1, 2010I installed Windows 7 32 bit ultimate edition to my acer notebook today. After taking my laptop to my office it didnt boot up. Taking so long to detect a hard drive. But when i press any key, it detect hardisk and boot up properly..
View 6 Replies View RelatedNo Boot Sector On Internal Hard Drive Error
Nov 28, 2011Yesterday, I was browsing on my computer and heard a weird clicking noise when the CD drive was running. About a few minutes after that, Firefox froze so I did a hard reboot, and up comes this message:
"No boot sector on internal hard drive No bootable devices--strike F1 to retry boot, F2 for setup utility Press F5 to run onboard diagnostics."
I have no idea what it means, and I've been everywhere trying to do System Restore using the Windows 7 reinstallation disk, but unfortunately I couldn't create a restore point because my jump drive doesn't have enough space and Startup Repair couldn't solve my problem. I've even tried the bootrec.exe on Command Prompt but I had no idea what to do. This is the first time that this has happened to me. My laptop is a Dell Inspiron 1545 and I have Windows 7 Home Premium 64-bit.
I'm on a tight limb about this problem right now because my warranty expired in early June this year, and I don't have the money for them to look at it, let alone buy a brand-new hard drive.
Installed Windows 7 And Now Hard Drive Wont Boot?
May 13, 2012Asus cm5570-ap006 originally running vista premium and owner wanted an upgrade to seven. Bought a new hard drive b/c old one died. Mobo had trouble finding new drive but, after setting bios back to default(F5) it installed and finally got working.Owner gets pc and starts getting blue screening and saying theres an f1 drive error and wont wake up after suspending without reboot.So I get it running fine by removing avg(which is causing blue screen for some reason) and the it is now waking up after auto hibernation. But if you put into hibernation manually it wont wake. I update windows and it goes back to not recognising hard drive.Flash bios remove cmos baterry reset bios to default and set hard drive to ahcpi and it reinstalls fine update windows and it stops working. Use restore point to get it back and running and this time dont update windows and its running ok again. Shut it down for the night and the next day go to boot it up and there is no bootable media and now I am trying to reinstall Windows 7 and after it does it gets a no bootable media error even though it is
View 3 Replies View Related
