Dell Dimension 4600 Desktop, Trying to install Windows 7 Home Premium (5.8GB) to my (10GB) hard drive, It's listed as Primary drive in BIOS, but when I go to install Windows 7, It doesn't list it in the list of Drives!
The hard drive is working fine, and obviously connected and executed properly, if it's configured correctly in the BIOS.
Windows 7 my computer shows disks my two partitions device manager and disk management do not show my hard drive
View 3 Replies View RelatedI had two hdd's in my computer and decided to remove one as I did not really need it and figured it save some power, after removing secondary hard drive which was just being used as storage i received the " MBR Error 1" after about 2 hours researching, I found I could repair it from windows cd, only problem is I only have a live usb version of it and when I try to launch system recovery the operating system is not listed and I have to load drivers for the hard disk. I really do not want to wipe and reinstall windows as its only been 2 weeks since i built the system and also I have a game which is 25gb digital download installed on it but it deletes the installation files after installing it and reinstalling would mean re-installing.
I guess I have 2 questions:
1. Is there anyway to copy a liveusb onto a disk ? for example, make an iso of a usb drive and burn it to dvd?
2. What drivers would I have to load on the windows startup recovery to get it to see the operating system
Below are my system specifications:
MOBO: Asus sabertooth z77
RAM: gskill ripjaws 8gb (2 x 4gb)
CPU: Intel i5-2500k
GRAPHICS: Zotac geforce gtc 580 3gb
HDD: WD caviar blue 500gb
OS: Windows 7 ultimate SP1 64 bit
I am running windows 7 home 64 bit (build 7600). I have a gateway fx7026. It has two internal hard drives. When I look under device manager they are both listed and they are both listed under the bios menu. When I look in my computer though under hard disk drives it only shows the one that I have the OS on. When I had Vista it showed both of them. Is this something I should be worried about. The drives are listed as WDC WD3200AAJS-22B4A0 DRIVE 1 and WDC WD3200AAJS-22B4A0 DRIVE 0.
View 7 Replies View RelatedI am running Windows 7 Pro (64). I have 2 hard drives installed. The (C) keeps my system and program files. A second 1GB hard drive is used for back-ups, pictures, music, etc. I checked and recked all permissions, and they are in order. There is only one user on the computer, Admin. I was able to access the drive up until a few weeks ago. I am able to scan the drive with Microsoft Security Essentials. I am able to access the drive while in safe mode, but for some reason I get this message while attempting to access it while in normal mode.
Location is not available
F: is not accessible
Access Denied
Any way i got this question i want to reinstall and i was wondering i got install files on D: ready and on C: i still got 7100 RC i want to install it on same drive if im not wrong old windows will be moved to folder windows.old right? so later i just delete windows.old and it will be fine right?
In earlier windows i could enter dos and click on setup exe and install from hd why its no longer possible
I'm installing a fresh copy of Windows 7 Ultimate on an Asus UL80J. When asking where I want to install windows, I get "No drives were found. Click to load a driver". The drive is new, has no problems, and is detected in the BIOS fine. Also, my Windows XP CD detects the drive just fine. I've tried both options in the BIOS for setting SATA to IDE and AHCI. I assume I'm missing a SATA driver needed at installation time, but I can't find one online or from the manufacturer.
View 8 Replies View Relatedi updated this post. look above it to find the other one.
View 1 Replies View Relatedi have an hp pavilion slimline. (model: s5213w) i am upgrading my hard drive but my power supply is limited to having just one hard drive installed at a time. when i put the new one in i ran the disks given to me by HP. the first half of the installation works fine (the part where im putting all the diff cd's in) then it says to remove all cd's and windows will automatically start installing the software. (it may take up to 3 hours). then a black screen comes on. kinda like comand prompt and the cursor line just flashes. three hours later. same deal. any help on this issue? its SATA btw.. idk if that makes a difference.What im trying to install is windows 7 on a Brand New WD5000AAKX (western digital) hard drive. ive used these cds before on my previous hard drive (which came with widows 7 on them from HP) and they worked fine to re install windows 7. The paper that came with the cds from HP say to use them when you want to "upgrade to a new hard disk drive"do i have to create a partition inside it or something? i jsut put the blank hard drive in because i dont have the power supply hookup for 2...
View 1 Replies View RelatedI have a laptop which has a ATA HDD and I tried to install Windows 7 on it, but when you come to the window for choosing a partition, nothing shows up. I have tried to upload new drivers for the chipset on the motherboard from intel (Intel 865 Chipset) but no luck still it doesn't do anything. I am able to find the drivers and I guess it installs them but in the end nothing. So my second attempt was to try and bypass this. I took another laptop and pluged in the hdd there and tried the installation, everything went smooth, when the first restart was prompted I took out the HDD and plugged it in my comp. Now windows starts up but only up to the logo and than restarts, over and over. I tried to install all over again but it still doesn't recognize the HDD on my laptop.
View 9 Replies View RelatedI get to the part of the installation where you select a partition/drive, and there is nothing there. I have tried using different two different HDD both spin up but the installation doesn't see them. I have also switched out SATA Cables, used different power connectors, even tried loading drivers, and have reset the BIOS by removing the CMOS Battery.
Specs:
GIGABYTE GA-Z68AP-D3 Intel Z68 Motherboard
Intel Core i5-2500 Processor
4x 1GB DDR3
Radeon 4870 Graphics Card
530 watt Power Supply
Seagate 320GB 7200 RPM SATA HDD ( tried to install first, no luck moved to the other HDD. Only one at a time connected. )
Maxtor 500GB 7200 RPM SATA HDD
No Disc Drive Atm Installing from Flash Drive?
I bought a new custom PC from ebay, a shop called FreshTech Solutions, so when it arrived I tried installing Windows 7 Home Premium (came with it). Obviously I need to do a custom install, as I'm not upgrading from anything, but when I get to the screen where it asks where I would like to install Windows 7, nothing is listed. I've tried loading from the disc that came with the motherboard, the Windows 7 CD itself, even the C drive (said it needed to format it, but couldn't).
View 4 Replies View RelatedInstall everything, the bios detect the hard drive (it's a new hard drive, never been use) but when installing the Windows 7 64, the hard drive list is empty.
Here my spec
Phenom II 940BE | Gigabyte 790X-UD4P | Seagate Barracuda 7200.12 500GB | XFX HD4770 512MB | OCZ StealthXStream 600W | NZXT Tempest
i was wondering if anyone has any programs they could recommend to use to wipe a hard drive clean before reinstalling windows 7, I noticed you have this CCleaner 3 link on here CCleaner - Download.com If i put that on a disk and started it up as i would to reinstall can that wipe the disk clean?
View 9 Replies View RelatedI bought a laptop asus K55VM, and switch the optical drive for a SSD. Both drives are format and active since what a want is a clean install.
During the instillation both drives don't show up, i tried to load drivers from intel but nothing shows up. The Bios shows both drivers, i change from AHCI to IDE but no effect.
Just bought a new hard drive due to my old one was failing. This is the same exact hard drive I had.Whenever I try installing windows 7, it "completes", then the screen blinks skips, and skips the "Create a user account" and just hangs at "Completing Installation". I thought I would give it a try and disable my gfx driver just to see if that would work.
View 9 Replies View RelatedBasically I put a new hard drive into my laptop and tried to install windows 7. It keeps saying bootmgr is missing, press ctrl + alt + del to restart. The OEM windows 7 disk is inside my cd-rom drive and I went to the bios and put the cd/dvd as first, and the hdd as second, pressed f10 (save and exit.) and still no luck.
View 3 Replies View RelatedBefore upgrading from XP to 7, I made backup on 2 external drives. I tested both backup, and they tested fine.
I then reformated my laptops hard drive & installed Windows 7. No problems were reported.
However I could not access the data on the 2 external hard drives. Windows 7 reported that they were unreadable and that I needed to reformat them!
The 2 hard drives were connected to my laptop when I installed Windows 7
I had to take both too a comuter geek who spent 2 days recovering my data - at a huge cost to me.
'installation directory must be on a local hard drive' Its not the msi as ive tested it on another computer.The msi is a plugin tool called t-splines by autodesk. Ive also tried older versions with the same error Things i've tried so far
sys restore
safe mode
right click - take ownership
I uninstalled 7zip which i already had, then reinstalled with the .msi from the website to test if it was all msi, however it actually worked I was looking around for other .msi install software just to test it but can't find any?
I'm not entirely sure if this is the right category for this thread, but it seems to be the one that closest fits my problem.
A bit of background detail to this story (which you may already know if you've seen my other threads):
I had my desktop PC running W7 fine despite some hitches with an old hard drive of mine. I was able to get hold of a slightly higher specced system recently (a pre-built Acer Aspire T650-8B7H, if that means anything to anyone which has a slightly faster processor, an apparently better motherboard, yada yada) and so transferred my 9800GTX+, RAM, PSU and hard drive in to the new PC.
However, obviously Windows 7 didn't like the significantly different hardware so I nuked the drive and went to reinstall Windows 7, only to find that the Windows 7 install disc refused to pick up my SATA drive (which I had Windows 7 installed on before) in the new PC. Conveniently at the same time my problematic hard drive completely died on me, so I shrugged it off as that being the problem. However...
I've just bought myself a 500GB Western Digital Caviar Black hard drive. It's very nice, and I had no problems partitioning it up and installing multiple linux distributions on multiple partitions. However, I stuck my Windows 7 install disc in to install it on the drive. I choose to make a custom installation and... nothing. The drive just doesn't show up. I'm told to load drivers, but since when do you need to install drivers for an internal hard drive?
I've had this problem before and thought it was a problem with the hard drive, but it shouldn't be happening to a brand new drive. The install disc picks up IDE drives just fine, but as of yet it hasn't found either of the SATA disks I've had in there.
Any ideas? I would put it down to a BIOS setting but I had no problems installing Linux on other partitions of the same drive.
So I've assembled a new desktop pc with a brand new Western Digital Green 1TB SATA hard drive. BIOS detects the hard drive and I pop in the Windows 7 DVD and go through the installation process until the screen that asks where I want to install Win 7 on the hard drive.
I try to format the drive but it gives me an error saying that the drive has to be in "read-only" mode and that I need to do so. That prevents me from progressing through the installation process.
I got no idea what that means and there is no extra pc around to format the new HDD on. Obviously there is no OS installed on the drive so I can format it inside Windows. That HDD is the only hard drive connected to the pc.
Specs: AMD Phenom II 1055T, 6 GB RAM, GTX460 HAWK
My mother asked me to fix her computer, his window XP is badly corrupted, so I tried to install Window 7 on her computer. However, the hard drive didn't show on the screen. I found it quite odd because BIOS detected it as IDE driver, and it's a SATA driver. I tried to install with old Window XP installation CD. Same thing, doesn't show on the window XP installation screen either.
I tried to hook hard drive on other computer, and was testing with Window 7 XD and see if it was working, and it did. It shown on the disk screen. My guess that it's probably the BIOS that occurred, or perhaps other things. I have one hard drive, nothing more.
While looking for solutions I seemed to come very close to finding someone with my exact problem, but not quite. Here goes:
I had a hard drive with Windows 7 installed. Everything worked, etc. Got a new hard drive, and installed 7 on there as well without making changed to the old hard drive (prompts displayed during new installation saying "old" windows files would be saved). I've been using it for a while now, however I want to use the old hard drive strictly for storage, so I tried to format it to clear the space out. I got the notice "Windows cannot complete format." Went to the forums and looked thru several suggestions, which brought me to try deleting the files individually.
Included in all this were attempts to give myself (the only user on the computer) full control of all files (which was already the case), to take ownership (via right click options AND command prompt "takeown" and "cacls"), to change permissions/ownership via "properties" for the drive/folders, command prompts to remove the "active" status of the old hard drive, as well as removing "boot" status from old drive (while making sure the new drive had "boot" status), tried everything I can think of using Disk Management AND the DiskPart utility, as well as countless other suggestions that I can barely remember. I'm still getting the "You need permission to perform this action." What I don't get is, if I'm THE administrator (and the only user), how do I not have access to this?
I'm sure there are some details I'm leaving out, but I've been at it for hours. Let me know if there's something you need to know. Running Windows 7 Ultimate 32bit, 4GB RAM, 3.2 Ghz AMD Athlon II.
I am trying to access my BIOS,cannot use f8 or any f to access,cannot load from my original disc yet it loads when the hard drive is not installed?
View 8 Replies View RelatedNot exactly sure how to explain or even exactly what im looking for but basically I had an older laptop running windows 7 home premium that allowed me from the boot menu to re install windows & home premium w/o key or anything. It was placed on a partition of my hard drive. I would like to do this again but im not sure what exactly im looking for or how to search for it in shorter terms. It was an MSI Intel duel core laptop. I would like to put it on my toshiba quad core. Im familiar with partitioning software and image restoration but not sure what exactly i should be looking for to do this. Just a clean Reinstallation of my OS without needing keys i dont care to back up any information except my os which is a clean install. Update Toshiba has this HDD recovery but i am not sure if this is what i need/want. MSI had a MSI recovery which did what i want. Is this the same/similar?
View 9 Replies View RelatedMy former hard drive with my MBR on it failed. This hard drive was/is 750GB and when I purchased my 'main' 2TB hard drive I made another fresh install of Windows. In other words, I had two installations of Windows on two separate hard drives. However, the MBR is located on the now-failed 750GB hard drive, and so my 2TB install of Windows won't work. I have tried (and failed) at repairing or otherwise installing a new MBR on the 2TB hard drive.
View 10 Replies View RelatedI'm building my first pc and I'm getting blocked right at the gate. I have a 64bit Windows 7 installation disk (home version, "for system builders" ). This is a fresh installation, I don't have any other OSs for this build so my options are limited.
It starts out fine, but when I get to the point where I am to pick a hard drive to install to, it won't accept anything. It will allow me to delete partitions but clicking on "New" or "Format" (under the advanced options) makes it think for a few seconds, then just stop like nothing happened.
I have tried formatting it through gparted, but no matter what I do it complains that the drive has been formatted with in GPT, even when the drive is completely clean and unformatted.
I'm using a Samsung Spinpoint F3 HD103SJ 1tb hard drive
on the MSI P67A-GD65 mobo
with intel i7 2600k.
When we install windows 7 our E drive is hidden.
View 3 Replies View RelatedI have just finished my first build and everything was going fine until I tried to install Windows 7. I got through the first couple menus, then when I get to the part where I have to save the OS in a storage device, it does not detect my hard drive.
Specs:
Gigabyte Intel GA Z77X-U3H
Intel core i5 2500k
WD Caviar Black 1TB SATA 3 7200 rpm
Btw the HDD appears in the Bios.
After installing Windows 7 on my PC all my hard disks(4) are display as removable disks in the icon of safely remove hardware on the taskbar. Is it related with enabling ACHI mode on my system?
View 1 Replies View RelatedTrying to install windows 7 on my new hard drive since my old one died on me, I set it to boot from disc and it just loads up the cmd prompt. I'm sure I just have to enter a cmd but I can't seem to find anything that works. I've searched around of course but haven't had any luck so I give up.
View 4 Replies View Related