I'm having a bit of a strange issue. What I am attempting to do is format my C (Windows 7) drive, in order to reinstall Windows from the installation disc.
Here is my problem. Whenever I try to boot from the disc, it just loads Windows normally and doesn't launch startup repair or anything. My thought is that this is due to the fact that my DVD drive, while fully functional, is not compatible with Windows 7. I know it works as when I first bought the PC it installed Windows7 just fine, so my thinking is that if I can get my C drive formatted, I will then be able to boot from the Windows disc and install.
I can't seem to find any option in startup that will allow me to do this. I also do not have additional DVD, CD or Blu Ray drives that I can install.
I noticed when I went about doing a fresh install of Windows 7 on the HDD that shipped with my laptop, and using the partitioning and formatting options included in the installation routine, that when I'd do a format, the formatting would complete very rapidly. From this, I deduce that the installation routine does not perform a low-level format.Perhaps, from this I should conclude that a low-level format is completely unnecessary. Yet, I seem to remember reading somewhere online, at some point in time (note: this might have been back in the Win'95 days) that it's better to do a low-level format; to flip all the bits to zero.
I have a Toshiba laptop that came with a preinstalled copy of Windows-7 (64 bit) version purchased in July 2010. No setup disk came with the laptop, but there is a "Toshiba recovery media creator" utility. Now, I want to format my laptop, and here I have few queries regarding this:
[1] What is the better option for formatting my drive? Should I use the Toshiba media-creator or install a clean version of Windows-7 from an ISO download (am I allowed to do that? If so, what is a good site to download?) There is a "sticker-certificate" on the bottom of my laptop with a product-key. Will it work with the new install?
[2] Do I have the option of installing a 32-bit version of Windows-7 instead of 64-bit with the above license? The reason is that most applications I use are 32-bit and hence a 32-bit OS is better suited for me. But does the license allow me to do that?
[3] (The tricky part) - Since I have a good 320GB HDD, I want to dual-boot by creating two partitions - with a linux distribution (Ubuntu/openSuse) running on the second partition? Assuming I don't have the option of clean-install, will I be able to create the extra partition for linux using the Toshiba utility?
I seriously needs some help with formattign my computer. I've got some virus' on my computer, and I'm not able to remove them (I have tried with Hijackthis and NOD32 Antivirus).
My problem is, that when I changed to Windows 7, my computer automaticly remved my recovery file, which holds my Windows Vista file. This means I can't install any operating system after format. I also need to format to clean up my computer etc. but that's unimportant.
This is a serious problem to me, because I use my computer for basically everything, and I have to use it on secondary college next year, and I can't afford a new one. so please help me, as fast as possible!
I am having a problem formatting a drive. When I first built this computer, I had two 500GB HDD's installed. Originally I installed XP on the machine. Some time ago, I installed Windows 7 on my other drive. I have been using Windows 7 for months now, and I no longer wish to use Windows XP.
I am running out of space on my Windows 7 Drive, I originally only allocated 90GB to it. I want to format my XP drive so I can move things around and get more space, but I cannot reformat, disk management gives me the error, "Windows cannot format the System Partition on this disk."
I REALLY REALLY do not want to have to reinstall windows 7. I basically want to format the XP drive and make that my new media drive, and extending the current Windows 7 drive to include the space that I will gain from moving my media drive.
I've formatted my laptop a few days ago and thought that some fonts in some websites looked weird compared to before, I thought I was just being paranoid and that it was my imagination, but after a few days where I couldn't stop to think that, I took a printscreen in the other pc on the house and comparing side to side to mine it as clear as day that it's different On the left it's how mine is, on the right how the other PC is(and how it was before in mine). All I did was formatting and installing most of the programs that was installed before on the laptop, I didn't tweaked the fonts or anything. Oh, also this is not specific to a browser, the font on internet explorer or firefox looks exactly the same. I tried resetting to default and checked that the font used is Segoe UI size 9.
I'm currently dual-booting Vista and 7, and I want to get rid of Vista, but I'd like a couple people to just confirm for me that I'd be doing it correctly because I don't want to mess up my MBR or anything like that.
I currently have Vista on my C drive and 7 on my F drive. If I go to Computer Management and then Disk Management, this is what I see:
First, because I have a ThinkPad, I have Q and S drives. But I believe they're irrelevant to this question.
My C drive, with Vista, says it's an NTFS drive, "Healthy (Primary Partition)".
My F drive, with 7, says it's an NTFS drive, "Healthy (Boot, Page File, Crash Dump, Logical Drive)".
If I were to just flat-out right click on the C drive with Vista and click format, and then restart, would I be screwed? Or would it load 7 because it would be my only OS? And if this would be a problem, how should I go about removing Vista?
My friend wiped my friend's computer on a Vista installer by choosing "load drivers" or something in the partition screen and then pressing format. I can't find this anywhere, or what I mean is there are no drivers to load. When I try to format, I can only format so that my computer saves a Windows.old file. Does that get rid of viruses? Does it get rid of a slow computer?
I have a Sony dvd recorder which has decided to stop formatting dvd's (all types -r, -rw, +rw etc).I have a lot of tv programmes now stuck on the Sony's hdd that I need, and wondered if I could use my pc to format dvd's, so that the Sony's format function is bypassed.
Okay, I want to do a fresh install of Windows 7 onto an SSD, then use my HDD which currently has Windows 7 on it for extra storage. However, I don't want to be prompted about which drive to boot from, nor do I want useless OS files on my spare drive.I don't have another drive to backup files to, so backing up then formatting isn't an option. What can I do to delete the OS files entirely and structure the drive like you would a typical backup drive?
I have a word doc on my USB that I don't wish to loose and now I'm getting a message to format! I've tried many approaches over the past week but with little success. The size of the file "c:UsersuserDocumentsSAVED FILES$ROOT00105Finding Form 1Part 3.docx" exceeds the 64KB limit for FAT 32Another company states that the Status of the file is 'Excellent', the size is '95 KB', the Date Created was '25/09/2012' and the Date Modified was '04/10/2012', Time '18:10'. That is the correct file although I'm not sure if 95KB is all the data?? It was roughly 20 pages of text
Ive had it crashing on me with 10 minutes everytime i turn it on. It was this minidump thing. I got my copy of windows 7 finally D and i was wondering if i can like... format my entire C drive and put the disk into the CD drive and do it there. I got like this boot thing in the front tht lets me choose wat i want to boot from.
i had originally windows vista on drive C and then i installed windows 7 on drive E, then i wanted to try windows 8 so i deleted windows vista form drive C and installed windows 8 ... now i tried deleting/formating Drive C to put another OS on it but i couldnt delete the windows folder, im guessing its booting from Drive C into windows 7 on drive E.i used Easy BCD to remove the windows 8 boot entry since im not using it.so what should i do now? how can i format drive C and still make windows 7 boot correctly?
I have installed windows 7 ultimate x64 and i am really impressed by it.
but i have a question for you, i have a second 500 gb sata hard drive which i have connected after the install which is formatted with ntfs file system from my original windows xp o/s , it shows up in device manager but will not work , windows ask me to format the drive which i dont want to do because has loads of files on which i dont want to lose.
am i missing something they both use the ntfs file system .
Ive got a dell xps 8300 that came with a recovery partition on the hard drive. Its taking up about 19 gigs of space and is not needed as I use recovery software on my machine. I want to format this partition and merge it with the rest of the C: drive. How do I go about this. I have tried right clicking on the partition but the format choice is greyed out
So I installed XP, and can't log on to Windows 7 atm. I understand why now. However, if I just format the XP partition, will I be able to log onto Windows 7 again?
I just placed an old hard drive into my computer to use as a slave. After I booted up on my current hard drive I went into disk manager and tried to format all the partitions. I formated one easily but the other won't seem to format. The option to format or delete volume are both greyed out.I then tried to boot from my Windows 7 disk to format the drive that way but it said it could not format dymanic drives. I can't change the drive to basic without deleting the last simple volume.
What I'm looking for is a tool that will boot from USB drive, and automaticly format and partition all drives in a computer. Since this will be used on a lot of machines I would like something that requires the least amount of input from me. All data need to be wiped, all machines have one drive to be formatted/partitioned. I have tried "KillDisk" and "Dariks Boot and Nuke", but Boot and Nuke did not work properly and KillDisk required to much input from me. Afterwards the machines will be installed via PXE boot.
My girlfriends laptop has windows 7 home premium with the serial number located on the underside of the computer. Somehow she has messed up her computer with virus' so bad that you cant do anything. I just wanna do a clean install. I dont need to backup or save anything. This laptop came with no discs. How do I do this. I can use my computer to download or make any
Is there anything that you should know before you format your drive/partition for a clean install? These are some of the main things you should do to avoid disappointment: Back Up important programs/files on the Windows 7 Partition/Drive Back Up themes/wallpapers/gadgets etc.. Back Up all bookmarks add-ons from firefox/i.e etc.. Download the latest graphics drivers or any other drivers that are necessary and store them on usb drive Useful Programs: EasyBCD: Is a great tool for editing the Boot manager EASEUS Partition Master Home Edition: Great Partition manager for creating/editing partitions (if you don't like the vista/Windows 7 disk utility) MozBackup: To backup all your firefox add-ons/bookmarks etc.. ImgBurn: Simple easy to use burning tool (to burn the iso image) Is there anything else that could be added to the list? Just post them here and I'll add them. I figured if we could get a few people posting Hints/Tips here it may be helpful to others in this situation.
i tried installing OSx86 in my secondary hard disk i got win 7 on my primary hard disk.
i messed of with something so win 7 didnt boot up i got loads of data in win 7 HD ti cant repair the OS boot up so i freshly installed win 7 OS in my secondary HD
now i want to delete previous win 7 installed in primary hard disk i cant format as i got 350GB datas i cant delete windows & program files and few other folders how to delete left out folders
What do I have to do to record DVD discs and be able to play them back on my relatively new Blue Ray player. They play fine on my PC but the Blue Ray says "this disc is not compatible "
