Format External Drive In Windows 7 Or Windows XP?
Feb 7, 2012What are the pros and cons of formatting an external drive in Windows 7 vs. Windows XP?
View 1 RepliesWhat are the pros and cons of formatting an external drive in Windows 7 vs. Windows XP?
View 1 Replies750 Samsung portable device. Problems seems to sort itself out eventually but it keeps firing up prompts to format the drive before I can use it. First time it happened I had to unplug it, restarted and then it was OK. It just did it again and then again when I restarted, took a minute or two but eventually it read the drive and it was ok. Why is this happening and what can I do to stop it? Might it be a power issue? I have the device connected via a USB 2.0 port, through an extension lead and then through a 4 way splitter. I have had problems with this splitter before I think, but not with the small connector. Maybe I can try connecting it through one of the other ports and see if it still has the same problem.
View 8 Replies View Relatedi've purchased a seagate 1TB external hard drive and need to format it in FAT32 format.
View 9 Replies View Relatedmy external hard drive (WD elements 1TB) has recently shrewd up after i formatted it. it has nothing on it not even a partition or format i added a partition using disk manger but i wont format it says format was unable to complete or something like that and it removes the partition that i just put on it i then partitioned it again but chose not to format and it had a drive letter and showed up as local drive in my computer when i looked at the format it just said RAW that is as far as i can get to getting it working?
View 1 Replies View Relatedmy external hard drive will only do a quick format not a full?
View 2 Replies View RelatedI want format my external drive. But i cannot be format my external hard drive.
View 2 Replies View RelatedI am acquiring a 1.5TB external drive. I will be basically have a single 1.5TB file on this drive. It will be a Truecrypt encrypted archive.
Given that the entire hard disk will be occuppied with one huge file, what is the best way to format it? Is NTFS still the way to go? Does it make sense to increase the cluster size above the 4KB default?
I am concerned about both performance and not wasting space, but the performance is the lesser concern.
Today I upgraded my 64 bit Vista Ultimate to 32 bit Seven Ultimate (retail). I did it by using the DVD to boot up and do a custom install as it wouldn't do a standard upgrade cos of the 32 bit/64 bit clash.
Anyway, it worked smoothly up until I go to my external hard drive to look at some old photos. I plug it in and it gets recognised, but then I get told that it needs formatting before it can be used. No way am I doing that!
I check the hard drive on another machine running XP and the drive is fine.
Any idea what's going on?
Perhaps I should just format the C drive and do a completely clean re-install of Seven?
How to open external hard drive without format
View 1 Replies View RelatedI have a Buffalo HD-LB3 3TB external harddrive. My main goal is to get it to work with my xbox 360. I was able to get it to work on my blueray player but it is not found by my Xbox. I have formatted it to Fat32 and I have partitioned it into two pieces, 1.8 TB and 1.1 TB. Still nothing is working.
View 9 Replies View RelatedCan I format a Hard Drive with Windows 7 using a 2000 format disk. If so, what are the prompts i see and action on boot-up before I use the format C. Done it before but just forgot
View 4 Replies View Relatedhow i can format my pen drive if window 7 and XP is unable to format it. they are saying files are in use. i have kept window xp, photoshop and some other software in it. Now please tell me how can i delete these items or format it.
View 1 Replies View RelatedI am trying to format my 1.5Tb Samsung external HDD using Windows XP X64.I tried using port E and F.Formatting goes on for upto 7 hours,progress bar gets to end and I get the 'can't complete format' message.I am a computing dummy, how to get this done correctly and successfuly.
View 6 Replies View RelatedI recently backed up about 500gb of recent work onto an external drive so I could clean my PC inside and out. I gave it a clean install of windows 7 and when it comes time to get my work of my external, the drive cannot be recognized and requires a reformat.It was working perfectly fine and I surely did not format the drive into a RAW file system. I tried plugging into my laptop running win8 and still the very same issue. I plugged it into a mac running the lastest mac os 10 and I can browse all my folders and see the files but I can't move/copy or open them. But at least I know all is not lost.
View 6 Replies View RelatedI recently switched from a Mac to a PC. I cloned my system partition of my PC to my external hard disk, and I only realized later that the external HDD was in a Mac OS extended (journaled) format. I thought I would have to format that partition as NTFS and re-clone afterwards. I tried to remove that partition using Disk Utilities on my Mac but got an error message. Surprisingly, though, when I connected the external HDD to my PC, I can access that partition under My Computer, and when I open Disk Management that partition is listed as NTFS.
1) How can I tell if the cloned partition on my external HDD is ok?
2) Should I reformat it and start from scratch instead?
3) If so, should I be making an image OR a clone of my system disk (so that I can boot from my external HDD and restore my system if my internal HDD fails)?
I have a new Dell with windows 7 and I have three external hard drives which I use on three other machines with xp pro one them. This machine will not open these drives and demands a format. They work perfect on my other machines
View 2 Replies View Related.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies View RelatedI have two hard disks-500GB and 80GB,so installed win 7 on 500GB HDD and 80GB was kept as slave.And i locked a drive present in 80GB using Bitlocker.Since week when i use win 7 ,after 20 min the display screen turned to black screen.So installed XP on 80GB drive.Now when i try to open the drive which i locked using Bitlocker is asking for format,that drive has important information.How can i retrieve the data from that drive?
View 3 Replies View RelatedI have a problem someone here might be able to throw some light on.
I am trying to format an external 80gb hdd in fat 32, and it keeps stopping saying "hdd too large" i have tried different ways with no joy
My 1TB external hard drive worked just fine. I used to store there everything. It was using NTFS file system. Last week I connected it to my laptop and it was really slow when I tried to move or delete files from my pc to the drive. I disconnected and reconnected it to my laptop. Suddenly, it said that I had to format it! I couldn't even access it neither the files in it. I managed to take some of the files to my laptop using recovery software and they are now safe. I thought the trouble would be gone now. I thought now I would just format it and store my files again. I was wrong. I can't even format it!
I tried disk management, cmd, almost everything. I downloaded various programs to run tests and try to write everything zeros. Turned out quitting that cause it tells me it needs a lot of hours. So, I tried a different approach that I was so stupid not to have tried yet. I tried formatting in other file system. I tried and it worked, well, almost... I can only successfully format it to exFat with the 'quick format' option enabled. If that option isn't enabled or I try to format it to NTFS, the formatting process takes forever or crashes. I would stay with my HDD formatted to exFat, but it is too slow..
It ran okay for a while, but started to freeze up. Anything that was in the RAM would load fine, but nothing new would load from the HDD.I decided to install Windows 7 x32 on the machine to see if anything changed. It seemed to run normally, so I thought that maybe something went awry in the first installation.I tried installing x64 again, but this time, when I went to format the drive, I got the following error:"Windows cannot format your drive (0x80070057)"I've tried this several times, deleted all partitions on the drive, and tried again. I get the same error each time. I'm beginning to think maybe the drive is faulty.
View 9 Replies View Relatedi cant format my usb drive window say was unable to complete the format
View 1 Replies View RelatedHow can I format hard disk c which have windows 7 system..
View 3 Replies View RelatedI cant format my drive c by windows 7 cd because dvd rom is not taking it?
View 3 Replies View Relatedmu computer getting freezed for every 10mins, its irritating me alot can u please suggest me what to do, as per my knowledge I am trying to boot C drive but even its not workinf
View 2 Replies View Relatedhow can i format e drive in windos 7
View 1 Replies View Relatedwhat should i do, when i unable to format my external and when i click on xternal it appears the parameter is incorrect
View 3 Replies View RelatedAm unable to read or write in my hard disk.. every time it shows msg saying not accessible. i tried to format but even that is not happening. i tried using cmd prompt. but no use.
View 1 Replies View RelatedHow can I recover my datafrom my External HDD which asking me to format
View 2 Replies View RelatedI have a 750Gb drive that I would like to reformat so I can use it for backups. When I try to format the drive I am told windows can't format it.
The drive was previously used as a C drive and held an intstalation of Vista. On the drives and Proram and Windows folders. When I tried to delete them I was told I needed permission from trusted installer. I found a "solution" to this on a microsoft site which effectively said to set the owner to the administrator group. I have done this. Now when I try and delete them I am told I need permission from the administrator. I have logged on as the administrator.
Formatting is also still forbidden. The files I want rid of take up 50Gb of space.
I have a laptop with Vista and I bought a dvd of Windows 7 Full version that I want to install on this laptop. I want to remove Vista. Do I have to format the c drive before installing Windows 7 or will this be done during the installation process?
View 7 Replies View Related