File Copy PCToUSB Triggers DPC's And Interupts To100%
Dec 14, 2009
System Runs like a champ, no issues what so ever, Can Play games all night, watch movies on here whatever Except.......I copy over a File to a USB Drive, Doesn't matter what size, doesn't matter what slot, mfg, Hard Drive, Thumb Drive Dose not matter, DPC's and Interrupts Climb to 50% each and peg both my Cores to 100% usage and im at a crawl. Reboot and im Fine, however the file that im trying to copy over fails, and give me the message of
Could not Find This Item
This is no longer Located in G: To Transfer . Verify The Items location and Try Again.
I have attached a few Screen Shots.
I'm At a loss, Microsoft has a hot fix for X86 but doesn't say anything about X64 or whats causing the USB Issue.
No one has been able to help me with the 100% usage issue.....
I have gone as far as Formatting and starting over from Scratch with nothing installed except the Drivers.
ANYONE !!! I'm at a loss here, i have tried numerous things and nothing is working..
View 4 Replies
ADVERTISEMENT
Mar 13, 2011
I tried placing one of my favorite programs in the Startup folder but every time it starts it prompts for UAC confirmation. Annoying. Is there a way to get rid of this?(without disabling UAC. at the moment I work around this by completely turning off UAC but I feel nervous about this).
View 5 Replies
View Related
Sep 5, 2011
is there any software out there that will support the use of the analog triggers on the x360 pad with a computer. it is a shame to not have there function most of the time.
View 7 Replies
View Related
Jan 2, 2012
I'm running Daemon Tools Lite, and have a conceptual problem. If I create a virtual disk, and then mount an .iso image of an OS on it, and then click on setup.exe to install the virtual OS, Windows 7 triggers a UAC warning.I don't understand why anything happening on the virtual disk would be subject to the host Windows 7's settings. It makes me fear that I'm not actually virtual, though the drive path certainly looked virtual.
View 2 Replies
View Related
Mar 22, 2011
I just installed windows 7 ultimate sp1 - Like the title says I'm seeing 35% cpu usage with nothing going on. I googled around and ran traces to see which driver it was, turned out the ahci driver was doing it. The USB driver showed similarly high latency but that can be delt with later. Most forums recommend upgrading your drivers but this problem has stayed constant both with microsoft's stock drivers for everything and after running windows built in search for drivers even after I manually grabbed the latest drivers for everything. url...BIOS is up to date4 GB RAM - Corsair something or otherEVGA Geforce 8800 GT450W psu1 DVD burner (sata)5 hard drives (sata) plugged into all but the first sata port because that caused nothing but headaches for me. Update - switching from AHCI to IDE in BIOS fixed the problem.
View 3 Replies
View Related
Dec 30, 2012
I think my windows and hdd are going to crash soon. i want to back up my files. but i could not. i could not copy the files as they are taking a awful lot of time. and sometimes it just stops copying and my pc freezes. what can i do?
View 3 Replies
View Related
Mar 21, 2012
I'm having trouble trying to copy a file into a folder.Every time i try to it say's i need "special permissions",I have went into properties to try a check the box,but it will not let me.I also tried turning off the UAC,but didn't do nothing
View 1 Replies
View Related
Aug 2, 2012
I can not copy a file to either the Program Files or Program Files(x36) folders.My account is suppose to be administrator. How do I set up sharing so I can use my computer and not be told I can not do certain things. I am on a home group what ever that is. When I try to share the folders I am told I do not have permission to share that folder. And I do not have permission to share or stop sharing the folder.
View 1 Replies
View Related
Dec 17, 2009
since two days i am trying to copy a exe file from a usb stick to my machine.
i tried everything. completely disabled uac, logged on as "superadmin", gave all permissions that i could think of. but still.
the strange thing is that explorer does not even display the icon correctly. it shows only the "generic" exe icon.
everytime i try to copy the file windows tells me that i do not have the permission to make changes to the file.
btw:
- the file is not broken, nor is the usb stick. i tried it on another Windows 7 machine and it works just fine.
- tried to copy it on D: drive too... same problem.
- zipped the file. copied the zipped file successfully to the drive but when unzipping it the folder is empty without an error message.
- turned off defender and AV. just in case it thinks it's a bad file.
well, i never had this problem before. any ideas?
edit: i forgot to mention that this file on the usb is in the same folder with several other files which i can copy without any problems.
View 9 Replies
View Related
Sep 23, 2010
With my Windows 7 Pro 32bit laptop(fully updated) I have issues with copy and paste. When I copy text from a file/document and then paste it into another file/document I have one of three things happen. One it will copy the text correctly, though if I press enter to go to a new line its as if the clipboard was emptied because I cannot paste again, two it will not paste anything as if I didn't copy before, or three it will paste a screenshot of what is currently on my screen into the document.If it does copy and paste correctly then when I open a new file or folder, the clipboard will empty so I can't paste the same thing into two different documents unless both documents were open when I fist copied the text.This issue also occurs whe trying to copy/cut files and move them to a new/different directory(if the paste location is not already open then the clipboard appears to empty).
View 9 Replies
View Related
May 14, 2011
I am trying to move a *.dll file from one location to another. It keeps on asking me for admin rights. Not sure what to do. I am using windows 7.
View 3 Replies
View Related
Jun 28, 2009
today i wanted paste a file to system32 directory in win 7 but i must have some kind of permission. What kind, how to enable it?. On Win xp i get communicate of access denied.
View 9 Replies
View Related
Mar 25, 2011
I cannot copy a file and replace an exiting file:No messages, not even "file exists"; this includes drags and copy/paste.Get "file exists" on "Save As.On "Cut" "Error 0x80070490: Element not found"I have to physically delete the file and paste the new one. This is not a protection problem, it is just a simple text file that I created for the test in 2 different folders. This is the first time I have ever seen this including Win 3.1.
View 3 Replies
View Related
May 12, 2012
I basically copied 276 GB from my hard drive to another external backup drive that is connected via eSATA on my computer. My motherboard and the hard drive support SATA II. File transfer took, I don't know how long I'm guessing 1 1/2 hours.
During the file transfer, my whole system halted to a crawl, well, worse than that. According to my resource manager, the CPU usage wasn't too high, and the RAM usage was 100%, with 15%-25% of my memory being used for "Standby" memory. The Disk usage was 100%. I was unable to open or close applications while the file transfer was in progress. I couldn't even type.
Is there a way to set priority while you're doing file transfers, thus leaving resources open to still use your computer?
View 9 Replies
View Related
Jun 18, 2011
i went to restore previous versions of this file, but the restore button is greyed out, and when i try to copy the version i want, it says i need administrator privileges to make changes to this file(of course i am using an admin account, and anyways im not trying to change it im trying to copy it)
i can see the file i want i just cant get to it! how do i get this to work.
View 1 Replies
View Related
Sep 12, 2011
I need to make a scrip that will only copy a file once. Then if that file is deleted from the destination and the script is run again, it will ignore that file, and move on to the next.
View 26 Replies
View Related
Dec 24, 2011
it says access denied whenever i try to copy any file on my f drive.
View 4 Replies
View Related
Apr 19, 2012
I'm trying to copy a music file from my laptop to my pc and i get this message " you need permission to preform this action". How do i give my permission? seems kinda sill not to be able to copy files from one to the other.
View 2 Replies
View Related
Jul 9, 2012
I'm trying to back up everything on my SSD to my HDD and wondering if that will have any negative repercussions.
View 2 Replies
View Related
Aug 28, 2012
i am unable to copy a video file, 80% of the file copies correctly and after that i get an error. But i can watch the complete video without any error. I am using Windows7?
View 2 Replies
View Related
Oct 19, 2012
In trying to copy in DOS a file from a: to d: I get the response "access denied"
View 10 Replies
View Related
Sep 4, 2011
How can it be done? Is it possible through the startup Command Prompt?
View 7 Replies
View Related
Mar 28, 2012
why a file copy (drag from one folder to another) can't work because Windows can't decode the audio? What the hell is Windows doing - transcoding files on the fly? Sniffing file contents because it doesn't trust users? The file works (plays happily in the km player) but I just can't drag it to another folder because windows doesn't know how to read the audio file.
View 6 Replies
View Related
Jan 27, 2012
In Windows Explorer, while viewing files and folders;
I want to be able to create a copy of the file, with an option when I right click. Instead of choosing Copy at right click, and then again right clicking in Windows Explorer and choosing Paste).
And also my main problem is Windows 7 is creating the pasted file name as "Filename - Copy" in the same folder with the original in it, but I do not want any spaces or even the dash. Can I modify it somehow to create the pasted filenames as 'FilenameCopy' instead of 'Filename - Copy'?
View 3 Replies
View Related
May 30, 2011
Below is a batch file I created to copy all the files from a program called A5V5. This batch file works to copy the files to two different drives What I want to do is if the J: Directory is not availble (This is a flash drive) that it will copy to the E: directory which is a second HDD and not leave a "The system cannot find the drive specified" when the flash drive is not inserted.
@echo off
cd c:
cd program files (x86)
cd A5V5
cd Ranch Mobile, Inc
Copy *.* "E:Ranch Mobile" (This is a second hard drive for backup files only)
Copy *.* "J:Ranch Mobile" (This is a Flash drive that is not always inserted)
Pause
I like the way batch files work and I can do these simple ones but when it comes to doing the more complicated ones I am at a total loss.
View 3 Replies
View Related
Oct 6, 2011
i have wondows XP and i went to update to SP3 and i got an error saying it couldn't copy the upnphost.dll file.
View 2 Replies
View Related
Jan 22, 2012
If C: is the root of the virtual machine and U: is the USB stick, I can PERFORM "copy C:folder** U:folder", but that line in a batch file does not work. How can I fix that ?
View 4 Replies
View Related
Feb 2, 2012
i am unable to copy any file from comp. to pen drive
View 2 Replies
View Related
Dec 20, 2012
I want to move my 'catdb' file which is a system file to another location so as to shrink my c drive. What is the procedure to get rid of the problem and how to copy and delete the same file in safe mode.
View 2 Replies
View Related
Jul 12, 2012
to debug the dump file as I m having BSOD when copy file to external hard disk. attached is all the info needed.
View 3 Replies
View Related
May 6, 2010
For days now, I've been looking to solve an issue I'm having regarding the permission settings. For whatever reason I simply cannot move a specific dll file, I then get the following message : "you require permissions from Everyone to make changes to this file" ==> it says "make changes" although all I want to do is copy and paste the dll file elsewhere...
So far, I've tried running the takeownership program, I've ran Registry Booster (who knows?), of course my user account settings are on "never notify me" AND YET I just can't copy/paste this dll file. I've got all the latest Win7 (64-bit) updates, AVG 9 AV+firewall (which I even turned off), I'm running an AMD Phenom II x4 3.00 Ghz, 4,00 GB RAM...and that's about it I guess.
View 9 Replies
View Related
