Excel Document Link Broken Due To New Documents Path
Sep 15, 2011
I've recently moved from XP to 7 and realized that due to the change in path to my documents folder any references from one Excel workbook to another no longer work because the reference is to an absolute path and expects the "C:Document and Settings..." path rather than "C:users." that Windows 7 uses. Having to change each reference in my many spreadsheets manually is just not an option. Are there any tools that could help with this? I've already tried Find & Replace to change the path but the Excel still asks to select the actual file that i'm trying to link to which is still very time consuming.
I keep getting this after a AVG scan. It goes away if I delete my restore points, but comes back in a few days. It's not every restore point, jus a few.
The F drive report is where my system backup is.
"F:System Volume Information\_restore{997332B2-67F1-48D7-90DB-920F9AE0F53F}RP99A0020946.exe";"The file is signed with a broken digital signature, issued by: Microsoft Corporation.";""
"F:System Volume Information\_restore{997332B2-67F1-48D7-90DB-920F9AE0F53F}RP99A0017790.exe";"The file is signed with a broken digital signature, issued by: Microsoft Corporation.";""
"C:System Volume Information\_restore{997332B2-67F1-48D7-90DB-920F9AE0F53F}RP99A0011929.exe";"The file is signed with a broken digital signature, issued by: Microsoft Corporation.";""
I have installed on my computer Office 2007.When i opend a Word or Excel document and than try to close it i get the following error messages: "Microsoft office Word has stoped working"A Problem coused the program to stop working correctly. Windows will close the program and notofy you if a solution is available.In some cases i can not even close my word ofr excel document and only can do so by using the Task Manager!
Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Professional , Service Pack 1, 64 bit Processor: Intel(R) Core(TM)2 Duo CPU P9700 @ 2.80GHz, Intel64 Family 6 Model 23 Stepping 10 Processor Count: 2 RAM: 6074 Mb Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, -1250 Mb Hard Drives: C: Total - 293167 MB, Free - 162442 MB; Motherboard: Sony Corporation, VAIO, N/A, N/A Antivirus: BitDefender Antivirus, Updated and Enabled
With Office 2010: I have a Word document with an embedded Excel chart. If I change the focus to some other program, then click back in the Word document, I see a box where the mouse is currently located (not the cursor - have to click again to get that to move) which shows information pertaining to one of the data points in one of the Excel charts.If I move the mouse over the op-up box, is disappears until the mouse is moved out of the box. If I click anyplace in the document, the box goes away.I have been experiencing this behavior ever since Office 2010 was installed - I do not remember if this was an issue with Office 2003. The behavior is clearly wrong and is quite annoying. Does anyone know what is causing this problem, and more importantly, how to get rid of it
I am trying to print a document in Excel Starter 2010. The document contains the columns A to J and rows 1 to 466. When I try to print the document, only one column prints per page. I have tried selecting all the columns and changing the print selection but this just shrinks the column size, and prints it smaller. How do I change it so that I can print all columns A to J on the one page?
We have a few Excel reports that we are accessing on a server over an HTTPS link. We have used links to these reports for the past 5 years with no issue. However, now that we have upgraded to Win 7 our users are getting a Windows Security Log-In pop-up when they click the link to the Excel Report. Once they find the Pop-Up and just close it (without entering any credentials) the report opens, however many users are unaware of this step or do not notice the pop-up and are therefore unable to proceed. Can anyone shed some light on why this log-in prompt is coming up and how I can get rid of it. Even though it requests user-id and password, simply closing it allows you to proceed so it is not serving any purpose other than to frustrate our users.
OS: Windows 7, Browser IE8 , Excel 2010, when I click the web page link for opening an excel file, I get a message as the file is corrupted, when I save the same file is in local disk, then it get opened
broken "See More Results" link after search.Everything works fine from Windows Explorer, just after clicking "See More Results" i get a screenshot saying - Windows cannot find search:query= ? Make sure you typed the name correctly and then try again.I am using Windows 7 Home Premium 64 bit.
However I have installed MS Office 2007, and now I have options to create new PowerPoint, Word and Excell documents. How would I go about removing and restoring these?
What is the difference between dual link DVI and single link DVI cables? Would I see a noticeable difference if I switch to dual link cables? Would I benefit any at all from switching from single link to dual link?
With my Windows 7 Pro 32bit laptop(fully updated) I have issues with copy and paste. When I copy text from a file/document and then paste it into another file/document I have one of three things happen. One it will copy the text correctly, though if I press enter to go to a new line its as if the clipboard was emptied because I cannot paste again, two it will not paste anything as if I didn't copy before, or three it will paste a screenshot of what is currently on my screen into the document.If it does copy and paste correctly then when I open a new file or folder, the clipboard will empty so I can't paste the same thing into two different documents unless both documents were open when I fist copied the text.This issue also occurs whe trying to copy/cut files and move them to a new/different directory(if the paste location is not already open then the clipboard appears to empty).
Does anybody know of any file converters out there (free if possible) that can convert ClarisWorks files to Office Word files? I have a lot of old documents that I wish to convert.
I know about trick of renaming regedit.exe to regedit.com from the command line. But that works only when the .com association is NOT broken.What do I do when BOTH are broken?
I have a compaq cq56-115dx latop, and looking for some input on a problem I have. I attempted to upgrage my ram from 2 gb to 5gb. The 4 gb chip went in ok on the bottom slot, however, when placing second 1 gb chip, I accidentally broke the levers. Since it was now broken I decided, to see what would happen if I gently replaced cover, to hold chip in place, ad screwed cover on firmly. Turned on laptop, and all is working fine, including all 5 gb memory is available. My question is should I leave it the way it is, or should I have it fixed properly. FYI the cover over the chip is vented.
I was talking to some friends over skype when i needed to log out and my mic was fine there were no problems with it. i logged out and when i logged back in and called a friend up on skype he could not hear me talking the only thing he could hear was a loud static noise. i went to configure the settings but it said i tried everything and it would still make the noise. i tried plugging in a brand new mic that has never been used before i took it out of the packaging and plugged it in and still the same problem.
I recently tested windows 7, 6801 only because you cant get the beta in 64 bit yet. Anyway. I use 2 260 gtx and under windows 7 games play much better than in vista BUT they would only run properly when sli was disabled. SLI mode in windows 7 for me was totally broken. The computer would freeze and not recover. The only way was to reset the computer. I hope it is only a driver issue since they do not make graphics drivers for 7 yet but geeze that really sucks. Is anyone else using sli in 7? I used 64 bit.
So the SATA connector on my old 64GB SSD snapped off, now it's become a crap shoot just trying to get the bios to recognize it. I've already accepted I'll need to RMA this one, and even bought a bigger replacement for it.to the nature of my OS install I am a bit confused as to how I should go about reinstalling windows. I'd put the main OS files (and drivers) on the SSD, while storing the users folders and everything else on my larger HD. Now however I am left with just my windows 7 install disc, and a 1TB harddrive I know has my user folders on it.How should I go about installing it? Is there an easy way to simply use the already established folders and the like, instead of manually moving/deleting the old ones?
I was playing total war shogun 2 on windows 7. Diagonal lines started shooting out of the characters, square block patterns start flashing all over the place. The graphics got progressevley worse and worse so i took in. They tested the graphics card and it was fine so they restarted the computer and then windows crashed. They reinstalled windows 7 and i started putting everything back together.
I just put total war back on my computer and started playing and its started again. I restarted my computer and all that came back was a blinking undersscore. Luckily i shutdown and it started normally but the graphics are still messed up.
i have been attempting to open some .exe files but keep on getting the message 'not a vaild win32 application'. A scan with Super Anti spyware shows the following - System Broken File Association HKCR\.exe. I am assuming that something is wrong with the .exe link. I have checked the list of defaults and noticed that the .exe default was missing. I have also tried some fixes which appear to attempt to change the registry, but these have not worked. Do i need to manually change some registry content?
what caused the problem: inserting a usb mouse ive been using for half a year. i got a bsod and now the D partition is broken. already tried re-installing C with a new windows, but no luck.How can i try to get the data out of D if thats possible? i already ran some kind of live CD, but it couldnt access the D partition...i need something strong, and if its not possible to get any data, whats a good formatting app?
i moved into a new house last week and when i turned on my pc i noticed how there was a 3/4 inch black gap between where the screen displayed colour and the end of the screen. I have installed the newest graphics drivers on my sapphire radeon 4850HD but it doesn't seem to change.. There are no new important windows updates, which i thought it would've fixed it in the first place. anyone have any idea?
Intel G45 WDDM drivers are highly unstable and give consistant BSODs in media center. This includes the drivers that ship with Windows 7 RC (7100). Any ideas where/when we can get some more stable/better drivers?
i have 2 hard drives, one running xp, one running windows 7.
up until recently they have been working fine together, but i think i had/have a virus and it trashed my XP drive (crashes right after desktop loads) which is no worry to me.
my worry is every time i try to boot into windows 7, i recieve the "BOOTMGR IS MISSING - CNTRL ALT DLT TO RESTART" error.
i have tried a bunch of things like attempting to move the bootmgr file from the XP drive to the windows one, and trying to create the bootmgr on the Windows 7 drive, but no luck.
so my question is how can i get windows 7 to boot indepentantly from my messed up XP drive, casue the boot files are on the xp one.
I installed a retail version of W 7 on a Fujitsu which broke 6 months ago and cannot be restarted. Now I cannot activate the installation on my replacement computer and the support is less than useful, always referring back to an automated system. I transferred the HD from the old computer to the new but cannot see a way to uninstall the windows 7 from that disc. Trying help by telephone was impossible because of excruciating bad connection.
Wifes Dell with XP blew up mother board and corrupted boot files. Placed drive as slave in my machine. Drive works fine, can access all needed stuff, can't boot it. I can access Favorites, Address book files from Outlook express, photos. I copied all the important things also to a seperate folder on a My book USB drive. Can I install the My book to her new computer running 7 ultimate 32 bit and just drag and drop or copy to the favorites file while in the explorer pane? She was running IE7. Also how can I put all of her address book from Outlook Express into Outlook 2010?
Yesterday my friend needed me to test something for him in MySQL, a program I had installed a while back. When I tried to get in, it told me that I needed a root password. Since I forgot that, and I had no idea how to log in, I used Revo Uninstaller Pro to uninstall MySQL and delete all the leftover files and registry values that it left behind. I'm not sure if that is what caused it or something else that I can't remember, but since last night a lot of my computer services aren't working.For one thing, I can't log into MySQL.I can't install/uninstall any programs. - Solved.I have my Control Panel listed as a menu in my Start list, but when I highlight it, it shows the Control Panel as empty.I can't turn on my Windows Security CenterI can't access/turn on System Restore and clicking on 'Turn System Restore on or off' does nothing.I can't access System Information - Solved.or System Properties - Solved.In addition, I can't click the properties of any folder (If I try to right click My Computer and hit properties, nothing happens), my computers sound is not working, my taskbar shows my internet as offline even though its working and I can't open pictures - Solved.I also cannot run SFC / Scannow - Solved.or run Windows Update - Solved.I also feel like there might be something wrong with my graphics diver, because as I've been typing this post, my screen keeps flashing to my desktop - Solved.I cannot pull up my specs using the program 'Speccy' because it says Class Not Registered for everything. I've also lost the CD for my Windows 7 Ultimate, so I don't know if I could use that to fix it. - Solved.Edit 1: My video driver was in fact affected by it, as I can't watch any videos, and attempting to crashes my firefox plugin process.
while downloading .avi file from internet, the connetcion got disconnected and the download could not be completed. How to locate that incomplete file in my computer and also is it possible to download the file from where it was disconnected?
