Error 1612: The Installation Source For This Product Is Not Available
Jul 19, 2012
My laptop is running on windows 7 64 bit and it has microsoft office 2010 starter pack built in. One day my co-worker gave me a CD to install a full version of microsoft office 2010. I thought 'why not?' but after the installation, it asked for product key which I do not have so I uninstalled it (not knowing it will affect my pre-installed microsoft office 2010 starter pack).
Days after I uninstalled the microsoft office (full version), I went to click on microsoft word (starter pack), and it needs a product key (it was pre-installed so there's no way for me to know the product key) and in the end I decided to uninstall it so I can install other working version of microsoft office. It probably leaves trail of registry maybe on the inside and also it has drive Q which I can do nothing about. So, I used "YourUninstaller" to completely remove anything related to 'microsoft office' and it did remove everything but when I tried to re-install different version (or even the same version) of microsoft office, it WON'T let me do it. I kept on getting errors, fed-up with the errors - I did a further reading on the net and found that I have to change the registry file in order to install microsoft office back to my laptop.
I turned the windows installer point to '0' in the regedit thingy (as this is what I read from the net). The default point is 1. After changing the windows installer point to 0, it really did let me install the microsoft office back into my laptop and I thought the problem was over but I noticed my windows now boot-up very slowly, it isn't normal...... and then I changed the point back to 1.
Everything works out fine until I noticed another problem. Every windows start up, I noticed that my razer synapse 2.0 driver now keeps updating. It's like every freaking restart or start up of windows, the razer synapse will update itself so I thought I'd just reinstall it and see what happens. It won't let me uninstall it with the Error 1612: The installation source for this product is not available. Verify that the source exists and that you can access it.
View 4 Replies
ADVERTISEMENT
Aug 10, 2010
From 2/3 days when i go to dvd-rom with dvd inserted start an installation: Quote: Product: PureHD -- Error 1706.No valid source could be found for product PureHD. The Windows Installer cannot continue. i search a solution but nothing..
View 4 Replies
View Related
Jan 20, 2013
find my installation source in my computer??
View 15 Replies
View Related
Jan 10, 2013
had a hard drive fail on a netbook, and I put in a drive from another of the same brand that had died for other reasons. The new drive took like fish to water - no blue screens, etc. And Windows even updated, as did MSE.
But I'd like to make this machine honest by entering the Windows 7 product key that's associated with the motherboard, so the next owner will never have a problem. Will I have a problem doing that? I don't want to lose what I already have.
View 6 Replies
View Related
Dec 15, 2012
For the last half year, I've become very desperate. My computer was working jst fine and then it started giving black screens after the startup. That moment just before you see your (custom) background. I've checked my registryfiles. I've fixed some errors but I couldn't find anything about this error[CODE]
View 9 Replies
View Related
Feb 16, 2013
I clicked on Device Manager > Other Devices > Mass Storage Controller. Under Device Status it said, "The drivers for this device are not installed. (Code 28)."
I don't know what device they are talking about. All the storage devices on my PC seem to be working. Why does DM think there is a Mass Storage Controller at location PCI bus 7, device 1, function 2? I clicked on Update Drive - search failed to find a driver and suggested none needed. I clicked the Uninstall button and the message dissapeared until I rebooted the system.
Can somone tell me why Windows 7 might think there is a Mass Storage Controller on my PC?
View 3 Replies
View Related
Oct 6, 2012
i decided to just make an account here when regarding anything computer related in general. So my first thread i´m going to ask you geniuses what i might be able to do about this error i recently started getting when trying to install games.
First time it occurred was when i was trying to install borderlands 2. I manage to install the games, but this error keeps popping up along the way, and the game simply doesnt stop loading when a loading screen comes up.
View 4 Replies
View Related
Sep 13, 2009
I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
View 9 Replies
View Related
Sep 4, 2009
What is the difference between a Windows 7 Default Product Key and a Product Key?
View 2 Replies
View Related
Jan 14, 2012
I have tried to install Windows 7 SP1 64 bit and it gave an error message of: windows update encountered an unknown error code 80246007. I also get the error message after my laptop restarts if the installation shows it supposedly installed: installation not successful an uknown error has occured Error 0x8008095. I have also tried the 3 steps to try before installing Windows 7 SP1 and I still get the above errors.I would like to know the following:
1. When we update Windows where does it store the updates. Because I noticed that each time I update I loose disk space and I am wondering if I could delete these updates once I know they work.
2. I noticed a folder in the color of purple. It is: c:userusernameApp Datalocalmigwiz in this folder it contains the following files: debug.txt, diagerrr.xml, diagwrn.xml, miglog.xml, setupact.txt, setuper.txt what is the folder for.
3.I use windows disk cleanup and ccleaner. I noticed that when you install or uninstall programs it creates a restore point and shadow copies. I clean them out once a month. Is there anywhere else that shadow copies are created and can be deleted. How about does Windows 7 has a cache where we need to delete files. How many temp folders does windows 7 create. I would like to retain some disk space back. Do you know if Office 2010 where it stores it updates and can we delete them once we know they work.
View 1 Replies
View Related
Nov 9, 2011
I was having problem running office 2007 on my windows 7 desktop hp machine. I uninstalled and wanted to install it again, this time i am getting this error message "error 1935. An error occurred during the installation of assembly component{4C0384C6-ED23-4E23-95F5-C812AAD8EFFE}. HRESULT: 0x8002802F"
View 1 Replies
View Related
Aug 13, 2009
i am on win 7 using a U300 laptop and i wanna install xp in a dual boot so i decided to use this guide: Dual Boot Installation with Windows 7 and XP
and use the 2nd method, so when u get to step 4 where u press enter, i press enter and i get the error saying i don't have an installed HDD drive and all i can do is press F3 and restart
View 6 Replies
View Related
Jan 28, 2013
I've just installed Windows 7 on top of my old XP machine. For the first hour I had no problems connecting to the internet. I downloaded antivirus protection (AVG) and Comodo firewall and windows 7 began updating itself. The comodo firewall download stalled and I had to manually reboot the computer. It seemed to start fine in normal mode and windows finished updating itself. Since then however (i.e. after the reboot) I have not been able to access the internet with an 'error 651" message displaying. I removed both AVD and Comodo with no change in the situation. I also did a system restore to before the windows updates, still no luck.
I access the internet via a broadband modem connected to a router. I don't have the full details of the models with me now but can repost in about five hours with the details if needed. I've searched online and note that many have said I should replace the raspppoe.sys file.
Since this is a brand new instal, should I just re-install Windows 7?
View 2 Replies
View Related
Jan 19, 2012
i've created another topic related to a BSOD . Anyways i've decided to format my OS so i did . But an error showed up , i'll tell you exactly what it said : Failed to create a new partition on the selected unused space.[Error:0x8004240f].That's what it said . I don't know what caused it but after i deleted that partition , i couldn't just make a new one it kept giving me this error
View 3 Replies
View Related
Jul 15, 2011
When I try to install this, I get an error.MSE Installation Error 0x80070643
View 10 Replies
View Related
Nov 3, 2009
tried to install chrome three times. it stopped everytime without any notices. downloaded complete, and started to install, hoop, gone.
i don't undersatnd why there is no full installation pack?
View 1 Replies
View Related
Dec 8, 2008
Hmm, anyone know what it means by "Windows features" ?
View 9 Replies
View Related
Aug 19, 2009
Just decided to upgrade from SP3 to 7 today, downloaded, burned and now when i boot from disk. windows loads then an error pops up saying
"Windows failed to load because a critical , missing, or corrupt"
"windowssystem32drivers
tfs.sys"
Would appreciate the help if anyone can.
View 1 Replies
View Related
May 4, 2012
I have built new PC ( mb: asus M5A78L-mlx Plus,cpu: AMD 2 x 260,4GB Ram AM3,1TB HDD) Trying to install windows 7 Pro 64 bit and i get this error saying "Windows cannot install required files.Make sure all files required for installation are available ,and restart the installation." when the file are expanding.(0%).I have already changed the hdd, replaced dvd rom ,disable usb in bios,changed sata cable,removed the batt on MB and still no luck so far.
View 8 Replies
View Related
Oct 24, 2009
i tried installing win 7 pro upgrade from student discount onto a seperate 1tb drive. i have vista premium and was doing a dual boot. files would load but after that i would get this error: winload.exe error. tried installing it alone onto the 1tb seagate drive, removing the vista drive but still the same error.
remove every peripheral and 2 stick of ram but still the same error. system is intel q6600 on an asus p5ke-wifi with 4 gig of 8500 ocz ram. also tried repairing my vista installation but the same error appears.
View 9 Replies
View Related
Feb 20, 2009
I'm getting a very strange installation issue. I was hoping someone could shed some light on my problem.
To start with, I'm using a Windows 7 v7000 installer disk. I'm confident that this installer is good, because I've already set up my gaming machine with it.
Now I want to install Windows 7 on my home theater PC. The components are as follows:
ASUS P5N-EM HDMI
Intel Core 2 Duo 2.66Ghz
Western Digital HD
2 GB of Ram
I am able to install windows Vista on this machine with out a problem.
This is what happens when I attempt to install windows 7:
Everything appears to load off of the DVD drive. I go through "Copying Files," "Expanding Files," "Installing Features," and "installing Updates." Then the machine reboots.
The installer continues to behave as expected, with "setup is updating registry settings." Then it reboots again. This is where the Sh*t hits the fan...
After the reboot, it takes me into a black screen "Windows Error Recovery." If I ask the machine to start up normal, it immediately reboots again, returning to another "Windows Error Recovery" screen. It will repeat this cycle forever.
If I ask it to start in Safe Mode, then I get the following error message: "Windows cannon complete installation in safe mode. To continue installing windows restart the computer."
I'm at a loss. I even downloaded build 7022, and the problem still persists.
View 3 Replies
View Related
Mar 13, 2009
I have an Eee 1000HE.
I used to be able to install Windows 7 Betas just fine, but now when I went to go install the latest build 7057, it gets up to the Copying Files section, then jumps straight to 100%, then goes into Expanding Files, then comes up with an error about not being able to find the files!
I tried reverting to a previous beta that I knew worked, same problem.
I tried reformatting (through Ubuntu) and still can't get it to work!
Anyone else have this kind of a situation?
EDIT: I'm using a IDE -> USB Adaptor, tried two different DVD drives, same result.
I would LOVE to have Windows 7 on my Eee, but it just won't work!
View 1 Replies
View Related
Jun 15, 2010
I've been trying to install Windows 7 for like 3-4 times now and every time I get to the Completing Installation part I wait a little and suddenly I get a red error box and it says something about "Windows cannot be installed..." and then pc shuts down. The error box is there for like 0.5 seconds so I cant read it, but its just like 1 sentence. "Cannot be installed" and something after that.
View 2 Replies
View Related
Jan 30, 2010
I am trying to install Internet TV on WMC so I can watch free streaming TV programs. When I click on the install button, WMC starts to download about 5 MB of data. When it finishes downloading, it gives me an error - Installation Error, A problem occurred during installation. Please try again later. The only option I have is "Close". I tried to reinstall many times but every time yielded the same error. I couldn't find anything in the event logs wrt this error. Where should I look and what should I do?
View 7 Replies
View Related
May 23, 2012
A cabinet file necessary for installation cannot be trusted. Please check valid certificate is installed and Cryptographic Services are enabled.
Code: 2 10:55:23: dxupdate: DirectXUpdateInstallPlugIn(): Plug-In Feb2005_d3dx9_24_x64.cab does not exist.
05/23/12 10:55:23: dxupdate: -----
05/23/12 10:55:23: dxupdate: DirectXUpdateInstallPlugIn(): Plug-In Feb2005_MDX_x86.MSI does not exist.
05/23/12 10:55:23: dxupdate: -----
05/23/12 10:55:23: dxupdate: DirectXUpdateInstallPlugIn(): Checking for Apr2005_d3dx9_25_x86.cab...
[code]....
View 1 Replies
View Related
Sep 29, 2009
i have a windows 7 Enterprise installed on a laptop..the issue with windows 7 is that i the list of "Cryptographic Service provider" in the drop down is not available..the drop down is for "Cryptographic Service provider" empty...what settings need to be done for that..
View 1 Replies
View Related
Oct 31, 2009
At the time of installation, an error # 0x80070570 occurs on the expanding files stage. This error states that the files are corrupted or missing.
View 3 Replies
View Related
Oct 31, 2009
I am building a 64bit system from scratch. At the time of windows 7 installation, after 9% completion, it is giving error# 0x80070570
Any advice will be much appreciable?
View 8 Replies
View Related
Jul 28, 2011
i have a hcl inffosystems cpu with 2gb RAM, a hitachi hds728080pla380 80gb hard drive, and it used to operate with win xp. while trying to custom install windows 7, the xp files were all deleted. However, the installation process stopped short and on restarting, the installation menu does not install into the hdd saying " the hardware may not support booting to this system." I've formatted the disk using diskpart on cmdprompt, partitioned it into an ntfs volume. it's still not accepted. the microsoft website says: "This problem occurs because Windows Vista cannot distinguish between ambiguous hard disks. In versions of Microsoft Windows Setup that are earlier than Windows Vista Setup, hard disks are marked with distinct values to distinguish them.owever,this method of distinguishing hard disks is no longer supported because of the potential for data corruption on hard disks. follow these steps: Create one or more partitions on all the hard disks that are not initialized. Restart the computer.Install Windows Vista."i only have two hdds, and i have tried everything i can think off in diskpart.
View 3 Replies
View Related
Apr 28, 2012
After all the steps been the first time, after it reboots it saysWindows failed to start. A recent hardware or software change might be the cause. To fix the problem:1. Insert your windows installation disc and restart your computer.2. Choose your language settings, and then click next.3. Click repair your computer.If you do not have this disc, contact your system administrator or computer anufacturer for assistance.
View 2 Replies
View Related
Aug 19, 2012
I'm using a IBM Thinkpad T42p laptop which was originally running Windows XP. My friend gave me bootable Windows 7 USB stick which he had used to successfully install Windows 7 on his laptop which is the same as mines (we're using school laptops) whenever I run the setup the laptop always abruptly restarts during the "Completing Installation" process and I get an error message saying "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed.
View 3 Replies
View Related
