Dual Installation XP And 7
May 20, 2009
I have the following problem.
After installing Windows 7 on my XP machine I tried to start "Earlier version of Windows" I only get a blinking cursor in the upper left corner of my screen.
Starting Windows 7 goes fine.
Here's how my hard disk looks like: (see attachement)
On the volume with no drive letter are all the boot files, XP and 7, alongside.
On D: is XP and on C: is Windows 7.
Strange thing is that I don't remember to have that volume with no drive letter before I installed windows 7.
There is content on that volume which belonged to D: if I remember correctly.
Further more Windows 7 has the status of Boot but not Active, the nameless volume is System and Active and both are primary partitions. D: is not.
So why can it boot Windows 7 and not XP?
I think that first the nameless volume is being accessed and it starts whatever has been chosen in the boot menu but it can only start Windows 7 maybe because Volume c is marked as Boot and on a primary partition and XP is none of that.
The installation of Windows 7 created this.
I have installed Easybcd.
Will this help me to solve the problem?
If I can'tmake the dual boot to work how can I safely remove Windows 7 and boot XP to have it another go?
View 9 Replies
ADVERTISEMENT
Oct 15, 2009
I am having Dual Boot With Windows XP SP3 and Windows 7
I dont want to have XP SP3 , so i am going to reinstall XP SP2 again
But I dont want to reinstall Windows 7 Again , please guide me how to do this?
View 5 Replies
View Related
May 8, 2009
I kept getting an install error(this was a generic error with no useful info, that prompted me to reboot) once files were done expanding and system attempts to reboot into the final install session where you create a user, ect, ect.
I needed to unplug my second monitor and everything worked fine, apparently the default drivers make a half hearted attempt of enabling dual monitors, as i had video on both screens, this was using an nvidia
8800 Gpu, so results may vary with other brands. Just thought i would
post this if others were racking their brains trying to figure out why their
installed failed.
View 0 Replies
View Related
Apr 28, 2009
How to Do a Dual Boot Installation with Windows 7 and XP ?
View 0 Replies
View Related
Dec 29, 2009
I have WXP installed on my 160 GB "C" drive and then installed W7 on the 40 GB "D" drive, which of course, becomes the "C" drive for W7. I received the infamous BSOD this morning on WXP and upon reboot, it gave me the following message::
"Windows could not start because the following file is missing or corrupt:
\WINDOWS\SYSTEM32\CONFIG\SYSTEM
You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM.
Select 'r' at the first screen to start repair."
How do I get the system to boot from the XP CD when it always goes to the W7 boot manager? Once I can get it to boot from the CD, I feel that I can do the repair.
Should I unplug the "D" drive so all the system will see on startup is "C" with XP installed?
View 13 Replies
View Related
Mar 4, 2010
My pc consist of a 200GB drive partition, one side has Win7 x86 and the other Windows Xp, Xp recently failed on me so i had to reinstall it, So i figure I'd installed Win7 X64 Since i use this Partition to run 3D and design Software, figure i could use the memory upgrade. Setup went fine, But now it boots right into win7 x64. Please tell me i can still boot into my other win7 x86 ? I never backed up some stuff on that side.
View 4 Replies
View Related
Aug 26, 2011
In process of creating a slipstreamed XP Install disk, but need to get the SATA drivers for this machine, as obviously there in no floppy to use. The factory disk has 2.5 GB of drivers, which obviously is more than I need, plus they will not fit on the CD.
View 3 Replies
View Related
Dec 6, 2009
at the moment I got two Windows 7 installations on a single hard drive. A Windows 7 Ultimate x64 for my office applications and a seperated Windows 7 Home Premium x64 for all of my games.Windows 7 Ultimate is on the first partition (C:) and Home Premium is on the 2nd partition - it was installed from within Ultimate so it has the drive letter D:.I now want to move the second installation to a new harddrive. This would have been an easy task with the goold old boot.ini - just editing the disk and partition number (example: (0)disk(0)rdisk(0)partition(1)WINDOWS="Microsoft Windows XP") to suite the new situation after moving the content of partition 2 to the second harddrive.Is there a similar command for the bcdedit to just change to target of the bootloader for Home Premium from disk(0) partition(2) to disk(1) partition(1)?
View 7 Replies
View Related
May 5, 2009
How to Do a Dual Boot Installation with Windows 7 and Vista ?
View 0 Replies
View Related
Oct 4, 2011
I have 2 brand new Asus K52JT laptops with the following specs:- i3 380M- 4Gb DDR3
- HDD SATA II 750Gb- ATI Radeon 6370M 1GbThey both came with Free Dos installed.On one of them I have successfully installed Windows XP , tweaking the bios to use the ATA instead of the AHCI controller. Generally the drivers work fine except for the card reader witch doesnt want to install. Being pleased with the results I have decided to leave the first laptop like this and experiment a little with the other one.What I want to do is use nLite software to inject the SATA drivers into an Windows XP installation iso to enable the AHCI controller and install.Then, if everything works fine I would like to install Windows 7 x64 on another secondary partition as the second OS.The problem is that I am not sure witch SATA drivers i need and from where to procure them.My question would be if anyone has tried something like this before and if there are any general rules or knowledge that i should be aware of.
View 2 Replies
View Related
Dec 31, 2009
i have Windows 7 installed which i installed it my self 24hours later i decided to install another OS a dual boot with XP (i dont know what im doing) so ive install it normally as i installed Windows 7 with DVD on but different partation location after successfully installed my computer restart the Asus logo pop up after that some long msg "OS Error" at the top left of my screen or something that i keep restarting and trying to find the SafeMode but i dont know how?(it new Motherboard) to go with SafeMode?
i know pressing an F8 but instead it takes me to select a Boot menu with DVD-Driver/Hard Disk Driver so i got stuck , so i reinstalled an OS but this time i reformatted the partation where Windows 7 installed so i can installed the XP from there now the installation is finished it restarted again but this time its not error OS msg its just it gives me the blinking " - " DOT from top-left of my my screen..theres nothing i can do on what i know for now but right now im installing back again to Windows 7 hopefully it fixed but still i need your help Windows 7 is very new and good awesome OS not every applications and games can compatible with it thats why i still like XP or possible going Dual Boot of Windows7+XP.
View 1 Replies
View Related
May 24, 2010
I started with Windows 7 and when the computer reboots to install Windows XP it starts the installation process then the computer shuts off? What do I do?
View 4 Replies
View Related
Jan 23, 2011
I have a new Windows 7 laptop. I want to have the dual boot with XP. I'm using the following link to set dual boot: Dual Boot Installation with Windows 7 and XP. I have XP CD & I'm now trying to install XP first, to be able to use Method-1 (When XP is Installed First)
But once it reaches installing XP, I get the Blue Screen:
STOP 0000007B
0xF78D2524, 0xC0000034, 0x00000000, 0x00000000
I never installed or used Win-7. I scanned with KIS2011 & it reported no infections. [URL]. There is only 1 HDD with C: having factory default Windows 7 installed. There are no other partitions.
View 9 Replies
View Related
Sep 13, 2010
New laptop has Windows 7 Home Premium 64bit. I have two business programs that won't run on a 64bit system. Partitioned the hard drive to install Vista Home Premium 32bit to create a dual boot system solely to run these two programs.Can't get Vista to load. Followed tutorial meticulously. All goes fine until the "Vista will boot for the first time" step. After this first boot, the screen returns to the "completing installation" page. However, the process dies here and the progress bar across the bottom of the screen never moves, even after an hour. Reformatted the partition and started over with same results. Multiple attempts always die after the first boot.
View 9 Replies
View Related
Sep 13, 2011
1. I have Windows 7 (64 bit) ALREADY installed on a SINGLE hard drive.
2. I have a clean blank other SINGLE hard drive upon which I will install Windows 7 (32-bit).
3. this is TWO individual hard drives, I want an Operating System installed on each individually. (Windows 7 on ONE, Windows 7 on the other)
4. I'd like a boot menu to come up giving me a choice to boot to either the Windows 7 drive OR the Win 7 (32bit) Prof. drive.
View 1 Replies
View Related
Aug 20, 2012
How I can Installing Two Windows to mean either Windows 7 And Windows 8?
View 5 Replies
View Related
Jun 4, 2009
I was having a problem with dual monitor using 7127 build. But only when I use newest NVIDIA drivers. My tv just flashes a few times, and I can see that fish a couple of times, but then it just goes to like no signal. If I use default drivers which are installed on windows install, then it works fine, but then I dont have NVIDIA control panel and some other features.
My video card is GF 8800GTS 650M 512MB DDR3 DUAL DVI TV PCIE. I would like to know if anyone else is having this problem and If it has been fixed in the newest build, so I could be arsed to do a clean install.
View 9 Replies
View Related
Feb 4, 2011
dual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
View 5 Replies
View Related
Nov 20, 2012
I am building a new computer and I want to go with a dual screen setup. I was wondering if I should go with a GTX 670 2GB GPU or two Sapphire Radeon 7870s. If not specifically these cards, let me know what you think. Is it better to have a single GPU with dual DVI output or two slightly cheaper GPUs using crossfire?
View 5 Replies
View Related
Nov 12, 2009
As currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
View 9 Replies
View Related
Sep 13, 2009
I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
View 9 Replies
View Related
Jan 2, 2010
I have Win XP 32 bit on my old drive. I buy Win 7 full retail and a new HD. I set bios to boot from cd etc. Win 7 starts up. It shows the 2 drives, so I select new drive...no problems. It starts install. I leave it to do its stuff.When I come back its up and all ok.I dint get any option to boot from XP. The drive was listed as "SYSTEM" but not old Windows or anything.
Also ASUS chipset drivers dont work and they were listed as 7 drivers.I tried Vista drivers but it normally shuts down and restarts. Nothing.
View 9 Replies
View Related
Jan 22, 2012
set up dual taskbars on my dual screen set-up
View 1 Replies
View Related
Jun 2, 2011
I have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
View 9 Replies
View Related
Jun 29, 2011
I just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off.sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes.whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc
View 9 Replies
View Related
May 16, 2012
So i have a new SSD Corsair Force 3 240 gig and all I want to do is install Windows 7 Pro on it. This board does not support parted magic (cannot wake from sleep and there are no onboard video to wake up to) so ive resorted to clean all.I have not been able to successfully boot the OS on the SSD. I never intended on setting up raid but apparently all the literature i see is on raid. I created a USB install disk as reccomended onto a 8gig ntfs primary active did the bootsect /nt60 X: and it successfully worked copied the cd over to the flash drive and copied the rste drivers in a folder called drivers My SSD is installed on port 1 6gig sata intel (as this board doesnt have marvel apparrently) My DVD is installed on 3gig Sata port 6 I set up Raid in the bios as reccomended by others (as this is the only way to install ssd?).
Nothing UEFI is enabled There are no other drives hooked up to the computer. Just SSD, USB cordless mouse, keyboard and no network cord or WIFI i started with a clean ssd as reccomended my bios recognized the ssd on post i booted into the win 7 install (MBR not uefi) i loaded the 64 bit rste drivers from asus as reccomended by others i left the machine to install the usb then booted into windows install (for whatever reason) i pushed f8 to boot my corsair windows brings up an error on a black screen File: windows/system32/drivers/adpahci.sys driver did not load Status: oxc0000221 Info: Windows Failed to load because of a critical system driver is missing or corrupt
View 2 Replies
View Related
Sep 12, 2011
i have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies
View Related
Apr 16, 2012
First, my laptop is a Aspire 5250-BZ853. I received it back in October, I think...may've been earlier. But anyhow, it was working just fine yesterday until I did a Windows Update. I had to restart, and it was fine again. But then it began running sluggishly slow, and just terrible overall so I restarted it once more and that was when the problems began.
This entire day, this has been driving me nuts. I have important files on here, and I backed up most on my external harddrive a bit ago but there were a few I missed and hadn't the chance to get (ironically enough the most important, papers and such.) At first, it said my password was wrong -- as if someone had changed it! I restarted it once more, thinking it an error or something, and did that again so I restarted it again. Finally, it worked but I think it logged me in as safe mode somehow. After that, it restarted on its own and began this loop. I did a LOT of searching on Google until finally someone suggested to someone else to try pressing "ALT + F10" I think it was as it was starting, and finally I made progress. Before that, it was just going into a constant rebooting loop and I couldn't even log into safe mode. Trying to reset it back to a time it was working was futile, because it said there was no recovery time there! So that shot that idea down. At last, I got somewhere.as well. I clicked the reset to factory settings, but still keep all the files (and they would be saved to "C:Backup" and I thought it had finally worked. But now as it reinstalls, I got an error saying something about how it needed to restart or something...so when I clicked "okay" it began again, and finally it all just came to a stop on "Windows could not complete the installation. To install Windows on this computer, restart the installation."
View 1 Replies
View Related
Nov 17, 2009
I purchased the following card: EVGA GeForce 9400 GT Video Card - 1GB DDR2, PCI (Dual Link) Dual DVI, HDTV, VGA, Low Profile
It says dual dvi, but in fact was only one dvi and one vga. I have to purchase PCI and not PCI-E for my work pc - ugh.
So...
Does anyone know of a good performance PCI video card with two DVI connections?
View 6 Replies
View Related
Jun 19, 2011
I set up XP in my boot.ini file and when i go and reboot into XP it says NTDETECT failed
View 3 Replies
View Related
May 15, 2009
I have this machine that was dual booted with XP and Win 7. Everything was working gravy. I put up the RC on the machine and now I get NTLDR erros when trying to get into XP.
Physical setup is as folows:
Sata Drive with three partitions (XP, Storage, Storage 2)
IDE drive with One partition (Windows 7)
Boot order is Sata, then IDE.
The boot loader comes up and I can get into windows 7 no problem, but when I choose the XP I get NTLDR errors.
I redid the boot loader with easybcd, but I still get the errors, I've copied NTLDR and NTDETECT.com on just about every drive except my card reader (haha).
Can someone walk me through getting XP booting again? I tried doing the /fix mbr thing but I can't remember the password for the XP install to get into the recovery console.
View 2 Replies
View Related
