Dual Boot Installation With Windows 7 And Windows 8
Aug 20, 2012How I can Installing Two Windows to mean either Windows 7 And Windows 8?
View 5 RepliesHow I can Installing Two Windows to mean either Windows 7 And Windows 8?
View 5 RepliesHow to Do a Dual Boot Installation with Windows 7 and XP ?
View 0 Replies View RelatedIn process of creating a slipstreamed XP Install disk, but need to get the SATA drivers for this machine, as obviously there in no floppy to use. The factory disk has 2.5 GB of drivers, which obviously is more than I need, plus they will not fit on the CD.
View 3 Replies View Relatedat the moment I got two Windows 7 installations on a single hard drive. A Windows 7 Ultimate x64 for my office applications and a seperated Windows 7 Home Premium x64 for all of my games.Windows 7 Ultimate is on the first partition (C:) and Home Premium is on the 2nd partition - it was installed from within Ultimate so it has the drive letter D:.I now want to move the second installation to a new harddrive. This would have been an easy task with the goold old boot.ini - just editing the disk and partition number (example: (0)disk(0)rdisk(0)partition(1)WINDOWS="Microsoft Windows XP") to suite the new situation after moving the content of partition 2 to the second harddrive.Is there a similar command for the bcdedit to just change to target of the bootloader for Home Premium from disk(0) partition(2) to disk(1) partition(1)?
View 7 Replies View RelatedHow to Do a Dual Boot Installation with Windows 7 and Vista ?
View 0 Replies View RelatedI have 2 brand new Asus K52JT laptops with the following specs:- i3 380M- 4Gb DDR3
- HDD SATA II 750Gb- ATI Radeon 6370M 1GbThey both came with Free Dos installed.On one of them I have successfully installed Windows XP , tweaking the bios to use the ATA instead of the AHCI controller. Generally the drivers work fine except for the card reader witch doesnt want to install. Being pleased with the results I have decided to leave the first laptop like this and experiment a little with the other one.What I want to do is use nLite software to inject the SATA drivers into an Windows XP installation iso to enable the AHCI controller and install.Then, if everything works fine I would like to install Windows 7 x64 on another secondary partition as the second OS.The problem is that I am not sure witch SATA drivers i need and from where to procure them.My question would be if anyone has tried something like this before and if there are any general rules or knowledge that i should be aware of.
i have Windows 7 installed which i installed it my self 24hours later i decided to install another OS a dual boot with XP (i dont know what im doing) so ive install it normally as i installed Windows 7 with DVD on but different partation location after successfully installed my computer restart the Asus logo pop up after that some long msg "OS Error" at the top left of my screen or something that i keep restarting and trying to find the SafeMode but i dont know how?(it new Motherboard) to go with SafeMode?
i know pressing an F8 but instead it takes me to select a Boot menu with DVD-Driver/Hard Disk Driver so i got stuck , so i reinstalled an OS but this time i reformatted the partation where Windows 7 installed so i can installed the XP from there now the installation is finished it restarted again but this time its not error OS msg its just it gives me the blinking " - " DOT from top-left of my my screen..theres nothing i can do on what i know for now but right now im installing back again to Windows 7 hopefully it fixed but still i need your help Windows 7 is very new and good awesome OS not every applications and games can compatible with it thats why i still like XP or possible going Dual Boot of Windows7+XP.
I have a new Windows 7 laptop. I want to have the dual boot with XP. I'm using the following link to set dual boot: Dual Boot Installation with Windows 7 and XP. I have XP CD & I'm now trying to install XP first, to be able to use Method-1 (When XP is Installed First)
But once it reaches installing XP, I get the Blue Screen:
STOP 0000007B
0xF78D2524, 0xC0000034, 0x00000000, 0x00000000
I never installed or used Win-7. I scanned with KIS2011 & it reported no infections. [URL]. There is only 1 HDD with C: having factory default Windows 7 installed. There are no other partitions.
1. I have Windows 7 (64 bit) ALREADY installed on a SINGLE hard drive.
2. I have a clean blank other SINGLE hard drive upon which I will install Windows 7 (32-bit).
3. this is TWO individual hard drives, I want an Operating System installed on each individually. (Windows 7 on ONE, Windows 7 on the other)
4. I'd like a boot menu to come up giving me a choice to boot to either the Windows 7 drive OR the Win 7 (32bit) Prof. drive.
I am having Dual Boot With Windows XP SP3 and Windows 7
I dont want to have XP SP3 , so i am going to reinstall XP SP2 again
But I dont want to reinstall Windows 7 Again , please guide me how to do this?
I have WXP installed on my 160 GB "C" drive and then installed W7 on the 40 GB "D" drive, which of course, becomes the "C" drive for W7. I received the infamous BSOD this morning on WXP and upon reboot, it gave me the following message::
"Windows could not start because the following file is missing or corrupt:
\WINDOWS\SYSTEM32\CONFIG\SYSTEM
You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM.
Select 'r' at the first screen to start repair."
How do I get the system to boot from the XP CD when it always goes to the W7 boot manager? Once I can get it to boot from the CD, I feel that I can do the repair.
Should I unplug the "D" drive so all the system will see on startup is "C" with XP installed?
My pc consist of a 200GB drive partition, one side has Win7 x86 and the other Windows Xp, Xp recently failed on me so i had to reinstall it, So i figure I'd installed Win7 X64 Since i use this Partition to run 3D and design Software, figure i could use the memory upgrade. Setup went fine, But now it boots right into win7 x64. Please tell me i can still boot into my other win7 x86 ? I never backed up some stuff on that side.
View 4 Replies View RelatedNew laptop has Windows 7 Home Premium 64bit. I have two business programs that won't run on a 64bit system. Partitioned the hard drive to install Vista Home Premium 32bit to create a dual boot system solely to run these two programs.Can't get Vista to load. Followed tutorial meticulously. All goes fine until the "Vista will boot for the first time" step. After this first boot, the screen returns to the "completing installation" page. However, the process dies here and the progress bar across the bottom of the screen never moves, even after an hour. Reformatted the partition and started over with same results. Multiple attempts always die after the first boot.
View 9 Replies View RelatedI started with Windows 7 and when the computer reboots to install Windows XP it starts the installation process then the computer shuts off? What do I do?
View 4 Replies View Relateddual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
View 5 Replies View Relatedi have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies View RelatedI installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies View RelatedI have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
View 1 Replies View RelatedI installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..
View 2 Replies View RelatedI can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now
View 9 Replies View RelatedHow to Change the OS Name in Windows Boot Manager ?
View 0 Replies View RelatedI have installed a year before UBUNTU on my pc with dual boot (i.e. use either window 7 or ubuntu).the NTFS partition that contains the UBUNTU was corrupted and i wanted to take the dual boot from my PC. I used the instructions from the web site: http://www.makeuseof.com/tag/how-to-...t-environment/but the disk management tool would not let me delete the NTFS partition.Could any one help me delete the NTFS partition and use just windows 7 as the only boot. step by step help would be great.
View 8 Replies View RelatedI got windows 7 running fine for a while now and ever since my XP did not boot anymore.I was not worried to much about it since i did not need it at the time.But now i really REALY need it,See i got all my Cubase projects in there and my cubase plug-ins al setup in XP and i need to get to the projects?At first it did not do anything and using easyBCD did not help either.I cpoied ntldr and detect to the root of C: wich contains my XP and now it shows the bootscreen but hangs on a black screen.The thing is right before the bootscreen shows i see the text" invalid boot.ini" flashing by very quick.I am able to enter that winXP install in safe mode and i tried safe/vga mode as well wich works but thats all.
View 9 Replies View RelatedI have a laptop I bought a year ago on which a created a dual boot Win 7 (32bit)/Win XP SP3 install, each on a separate partition. It was my first Win 7/XP dual boot install, and my first personal system that I allowed to have a Win 7 install on it at all, so although I have plenty of experience working on pretty much every previous version of Windows, I have very little experience with Win 7 and dual boot configs.
Today about 2 hours ago my audio spontaneously stopped worked for no good reason, so after shutting down each program to see if that cured it (which it didn't), I restarted the system. Out of the blue, for the first time I've ever experienced it, I received the msg "MBR Error 1" - Press any key to boot from floppy. I don't have a floppy of course on my laptop, and if I press any key I simply get the same msg. I turned the system off for a few minutes to make sure it was a good cold boot, but every time I still get the same msg. I tried switching the BIOS setting from IDE to AHCI (IDE is required for XP to boot, AHCI required for Win 7), but I still get the same error msg before I'm even prompted with the OS boot selection, so it made no difference of course.
I looked up this issue and found various suggestions, but none of the ones I found took into consideration a dual boot config., they were all Win 7 specific solutions. I don't what to try and repair the MBR only to have it screw up my dual boot config and be unable to access XP, which is what I use almost exclusively, nor do i want to lose access to Win 7 if at all possible.
I had a backup HD of my complete system that I saved several months ago when I upgraded my HD, and I periodically refresh the most important files on it, so I'm currently running on the laptop in question using my old HD, and it's working just fine. Worst case I can just clone my old HD to my newer HD that's screwed up, but I'll still lose a lot of changes I've made to the OS since I upgraded the HD and have to reinstall and config a number of programs, so that's my last option. I'll also have to back up about 200GB of data from the newer HD which is much larger than my old HD, and then restore it back after the clone, something that will take a lot of time and unncessary effort if I can just fix the MBR.
I had Win XP on 1 HDD & installed Win 7 on a different HDD. I think I accidentally did a dual boot install because Win 7 won't boot without the the XP disk connected to the motherboard.
That was fine until my XP drive died yesterday. Now Win 7 won't boot. The first time I tried to repair, Win 7 was not even seen. so I booted into diskpart and made the partition active. Now it could be seen as an OS.
Then I did a startup repair. It did whatever it does & when it was finished I restarted the pc but it didn't boot I went back to diskpart and confirmed the partition was active. I went back startup repair and tried again.
This time it said it could not detect a problem, but it still will not boot. What else can I do? My pc is homebuilt. Right now I have the 1 sata drive, 2.53 ghz cpu, 4gb ram, onboard video & sound
As currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
I installed Windows 7 32bt profesional on the D: partition on an XP machine (C. Dual boot worked fine, but since I had to reinstall XP I have lost the option to change partitions at boot.I want XP to be the default but with Win 7 to an option at boot.My boot.ini is currently:[CODE]
View 4 Replies View RelatedI wanted to dual boot Mac OS with my Windows 7 but everything I do it comes wrong, simply doesn't work. I tried dual boot with iatkos v1.0i, iatkos s3, iatkos v7 but still nothing.
View 3 Replies View Relatedi have a hard disk 500gb and i made three partitions.the 1st partition i installed windows 7 first.what i did today?i wanted to install windows xp to the 2nd partition.i installed and now that is the biggest problem.i cant in to windows 7 anymore.when i turn on my pc it has only windows xp.it hasnt dual boot to choose what operation system i want to in.so what to do?i want windows 7 and xp with dual boot to choose
View 9 Replies View RelatedI tried to make a dual boot with windows 7 and windows 8, but when I made a partition, the hard disk drive (C changed to dynamic.Can I still upgrade to windows 8?how can I convert it back to basic disk?I have windows 7.
View 2 Replies View RelatedVideo tutorial on how To Dual Boot Windows 7 ?
View 0 Replies View Related