Does Win 7 XP Mode Support ExpressCard Slot ?
Jan 4, 2010
I have downloaded and installed Windows 7 Virtual Machine and XP Mode. Everything went smoothly.
The software I wish to install in XP mode uses a PCMCIA card (with dongle) to communicate with various machine controls for troubleshooting.
My HP Pavilion laptop has an ExpressCard slot for which I can buy an ExpressCard to PCMCIA adaptor.
My questions is: Will the XP Mode software running on the Win 7 machine support and utilize the ExpressCard slot?
View 4 Replies
ADVERTISEMENT
Aug 20, 2012
I have a FW800 external storage drive and only usb 2.0 ports on my laptop.Would it be possible to use a laptop ExpressCard with a FW800 port plugged into a USB ExpressCard adapter?If it does work, would I see any of the FW800 speeds or get capped by the USB 2.0 port?
View 3 Replies
View Related
Dec 13, 2012
I am using a USB device for Internet Service. I need to boot into safe mode with networking support. Is there a solution that USB port could be detected in safe mode , letting me use Internet
View 2 Replies
View Related
Jan 15, 2012
Just loaded windows 7 and found the same problem - no full screen mode for dos programs. Did you find an answer?
View 1 Replies
View Related
Sep 28, 2012
what should i do? i get this screen ' this system does not support full screen mode" i use windows 7. i need the system to play chess master 2100, a DOS game developed in 1989.
View 2 Replies
View Related
Aug 2, 2011
Does Win 7 XP Mode support devices as well as programs. In other words, I have a printer and scanner that have XP or Vista drivers, but no Win 7 drivers. Will XP Mode allow me to use them on a machine running Win 7?
View 3 Replies
View Related
May 3, 2009
It seems some of the most advanced Intel Processors doesnt support XPMode
for eg: Core 2 Quad Q8200 and Core 2 Duo E7400 wont support XPMode
so here is complete list of Intel Processors(both desktop and Mobile) that support XPMode:
Desktop CPUS
Core 2 Duo
E4300/4400/4500/4600/4700 NO
E6300/6320/6400/6420/6540/6550 YES
E6600/6700/6750/6850 YES
E7200/7300/7400/7500 NO
E8190 NO
E8200/8300/8400/8500/8600 YES
Core 2 Extreme
QX6700/6800/6850 YES
QX9650/9770/9775 YES
X6800 YES
Core 2 Quad
Q6600/6700 YES
Q8200/8200S/8300/8400/8400S NO
Q9300/9400/9400S YES
Q9450/9550/9550S/9650 YES
Core i7/Core i7 Extreme
I7-920/940 YES
I7-965/975 YES
I7-9200/9500/9750 YES
Pentium D/Pentium EE
805/820/830/840 NO
915/925/935/945 NO
920/930/940/950/960 YES
955/965 YES
Pentium for Desktop
E2140/2160/2180/2200/2220 NO
E5200/5300/5400 NO
Mobile CPU products
Core 2 Duo Mobile
L7200/7300/7400/7500 YES
P7350/7450 NO P7370 YES
P8400/8600/8700/9500/9600 YES
SL9300/9400/9600 YES
SP9300/9400/9600 YES
SU9300/9400/9600 YES
T5200/5250/5270/5300/5450/5470 NO
T5500/5600 YES
T5550/5670/5750/5800/5850/5870/5900 NO
T6400/6570 NO
T7100/7200/7250/7300/7400 YES
T7500/7600/7700/7800 YES
T8100/8300 YES
T9300/9400/9500/9550/9600/9800 YES
U7500/U7600 YES
Core 2 Extreme Mobile
QX9300 YES
X7800/7900 YES
X9000/9100 YES
Core 2 Quad Mobile
Q9000 YES
Q9100 NO
Core 2 Solo
SU3300/3500 YES
U2100/2200 YES
Core Duo
L2300/2400/2500 YES
T2050/2250 NO
T2300/2400/2500/2600/2700 YES
T2300E/2350/2450 NO
U2400/2500 YES
Core Solo
T1300/1400 YES
T1350 NO
U1300/1400/1500 YES
Source:
http://processorfinder.intel.com/Default.aspx
Intel to Add support for Intel Virtualization for
Core 2 Quad Q8300,
Core 2 Duo E7500,
Core 2 Duo E7400,
Pentium E5400 and
Pentium E5300.
So the Processor bought after June 12 will support Hardware Virtualization
View 9 Replies
View Related
Sep 2, 2012
Why windows 7 system does not support fullscreen mode?
View 2 Replies
View Related
Dec 10, 2012
I am trying to update my BIOS to TRY to run my new processor and I keep getting errors like "IHISI get support mode failed" and "The utility has detected your notebook pc was resuming from standby."
View 1 Replies
View Related
Jul 4, 2012
priviously i ws using vista n evrything ws ok but i switched to windos 7 dan my sd card slot stopped working along with my scroll button in my laptop.whats wrong?????
View 2 Replies
View Related
Feb 2, 2012
I've just bought a new PC, I'm sure i placed everything right problem is i don't see nothing on the monitor, I tried to mount my GPU (Vapor-X HD6770) on every PCI-E slot (Gigabyte-990FXA-UD7) i got and still not working, Is there anything i'm missing?
View 4 Replies
View Related
Oct 14, 2011
Does Anyone Know A Way To Put A Regular PCI Card, Such as a NIC, in a PCI x16 Slot?
View 4 Replies
View Related
Jul 20, 2012
When I boot up my computer, it POSTs nicely displaying all the POST information. I have Windows 7 drivers set to visibly load and when that finishes, my BenQ XL2420T monitor displays "No Signal!" and I have a blank screen. If I disconnect the cable, I get the "No Cable Connected!" message from the monitor. When I reconnect the cable, the "No Signal!" message appears along with the blank screen again. This occurs with an Asus GTX 580 Matrix in PCI-e Slot 1 (closest to the processor) with a Display Port cable. Moving to the next available PCI-e slot results in a flawless Windows 7 bootup sequence.
[code]...
View 2 Replies
View Related
Feb 4, 2011
I have a dell dimension 9200 and the motherboard can handle a maximum of 4gb of ram, but is there a limit per slot? In other words does it have to be 4 x 1gb sticks of ram or can I use 2 x 2gb sticks? The reason I ask is that I've had lots of bsod and crashes recently and after performing lots of tests using memtest it seems that 2 of the ram slots on my motherboard are bad meaning I only have 2 good ones to use.
View 8 Replies
View Related
Aug 23, 2012
My PC has a blue VGA (coming from motherboard). The monitor has a matching blue VGA cable, yet I get absolutely no signal what-so-ever when I hook it in and boot it up.I could use another slot, perhaps from the GPU or the white DVI below, but I need the VGA blue slot 'enabled' so I can spare an adapter necessary for my second PC.My monitor is set on Analogue apparently, if that helps. I'm really hoping this is just settings and not a faulty motherboard issue.
View 2 Replies
View Related
Feb 1, 2013
does the xp 205 have a memory card slot
View 1 Replies
View Related
Oct 11, 2011
I initially fixed my first string of BSODs due to my ram sticks being in the wrongs slots. That fixed it for about 3 months. But I just recently bought a new video card. GeForce GTX560ti. My older card being ati radeon 4850. I updated my drivers the other night to a beta driver for the Battlefield 3 beta. That is when I noticed 2 BSODs in 1 day. I'm attaching my mini dump folder in hopes that maybe I can find some technical support as I am not the most knowledgeable on computers
View 1 Replies
View Related
Apr 6, 2011
[URL] my problem all started when I accidentally pressed the sleep button on my keyboard. While that was happening I had just started loading a game called League of Legends, had my web browser up, and had a microphone program called Ventrilo all running in the background. Monitor went black and into standby, computer's main light went from blue to orange. When I tried to click on my mouse/press keys on my keyboard it came out of sleep but still no signal from the monitor, I then restarted the computer from it's main switch and still no change. I could hear through my headphones that the computer had booted and made it to the log in screen, but still no monitor signal. The graphics card I'm using in my PCI-E slot at the moment is a Galaxy 450 GTS, been working fine for over 4 months until now (Uses a DVI Cable). At this point I decided to switch out a PCI-E card that uses VGA instead of DVI to see if my chord was buggy knowing that the card is in fully working condition just less powerful, still no change. I plugged my monitor into another computer and my onboard graphics card, works fine.
Thing that I've tried:
-Reset cmos
-Reset motherboard battery
-Seated a VGA PCI-E Graphics Card that I know works fine, still no monitor signal
-System restore
-Tested RAM and took each stick out one by one booting each time individually
-Reseated the graphics card
-Tested Monitor on another computer (Working)
-Made sure all power connections are firm
-Changed my power settings to never hibernate
Onboard graphics card is working, but won't recognize that there's any card in my PCI-E slot (Fan works on the card showing it has power). I've read through different forums that people have had a similar problem but none seem to be exactly the same as mine. I've searched through my BIOS (Very limited options to say the least) and cannot find anywhere how to disable my onboard graphics card and make PCI-E primary. I've tried to uninstall my video drivers and reinstall, but because it doesn't find the GTS 450, it wont let me apply the drivers. The other day it made 7 beeps during post, from what I read means it's a video ram issue, but now that has stopped after putting my BIOS settings to default. The only solution that I can think of off the top of my head is to reformat Windows 7 Ultimate 32bit.
View 2 Replies
View Related
Oct 5, 2011
I'm trying to install the Sapphire ATI Radeon X1800 XT graphics card, however, when I place it in the PCIe slot, I don't get any video. The card only has two DVI outputs. The mother board is a Gigabyte ga-k8n51gmf-9 with an Nvidia 6100 integrated graphics. I can get a signal with VGA off the on board graphics, and I disable it, then try and install the new card and I don't get any signal from either the card, or the VGA output (Integrated). When I take the card out, I get a signal from the VGA again...Also, the CMOS battery had to be replaced. I'm wondering what settings need to be changed. Its an Award BIOS F7.
View 7 Replies
View Related
Aug 20, 2012
I have the Acer Aspire 5810TZ with Windows 7 pro 32-bit
View 5 Replies
View Related
Oct 8, 2012
i am looking for a sound card that can handle some pc gaming, but i have no idea what i am looking for, i know that it exists but i have no idea what to buy. If it helps i have a radeon 4650 hd with agp, however do i need one sound for better graphics to play something like turok and nfs shift
View 3 Replies
View Related
Apr 6, 2011
url...my problem all started when I accidentally pressed the sleep button on my keyboard. While that was happening I had just started loading a game called League of Legends, had my web browser up, and had a microphone program called Ventrilo all running in the background. Monitor went black and into standby, computer's main light went from blue to orange. When I tried to click on my mouse/press keys on my keyboard it came out of sleep but still no signal from the monitor, I then restarted the computer from it's main switch and still no change. I could hear through my headphones that the computer had booted and made it to the log in screen, but still no monitor signal. The graphics card I'm using in my PCI-E slot at the moment is a Galaxy 450 GTS, been working fine for over 4 months until now (Uses a DVI Cable). At this point I decided to switch out a PCI-E card that uses VGA instead of DVI to see if my chord was buggy knowing that the card is in fully working condition just less powerful, still no change. I plugged my monitor into another computer and my onboard graphics card, works fine.
-Reset cmos
-Reset motherboard battery
-Seated a VGA PCI-E Graphics Card that I know works fine, still no monitor signal
-System restore
-Tested RAM and took each stick out one by one booting each time individually
-Reseated the graphics card
-Tested Monitor on another computer (Working)
-Made sure all power connections are firm
-Changed my power settings to never hibernate
Onboard graphics card is working, but won't recognize that there's any card in my PCI-E slot (Fan works on the card showing it has power). I've read through different forums that people have had a similar problem but none seem to be exactly the same as mine. I've searched through my BIOS (Very limited options to say the least) and cannot find anywhere how to disable my onboard graphics card and make PCI-E primary. I've tried to uninstall my video drivers and reinstall, but because it doesn't find the GTS 450, it wont let me apply the drivers.The other day it made 7 beeps during post, from what I read means it's a video ram issue, but now that has stopped after putting my BIOS settings to default. The only solution that I can think of off the top of my head is to reformat Windows 7 Ultimate 32bit.
View 8 Replies
View Related
May 25, 2012
I am currently sitting here with a dilemma. The problem I am facing takes back two weeks where I got my new graphic card MSI 560Ti. I have a CoolerMaster HAF 922 case, my PSU is relatively small but compared to my older graphic card the new one is absolutely massive. I also uses Asus P6T Deluxe v2 Mobo which has 3 PCI-E 2.0 slots which I found out recently. They are placed in this order from left to right; 2xPCI-E 2.0 slots, 2x PCI slots, 1x PCI-E 2.0 slot.
I noticed that my card turns out to be at 90 degrees when I'm running a game for instance because there is too little space between the graphic card and PSU which makes it very little to no airflow in between. I decided to put my graphic card into the stand alone slot PCI-E 2.0 to create some space. But I have to sacrifice my sound card which I can't put it into the PCI slot no longer. Also the sound card technically should be able to fit into a PCI-E 2.0 slot correct me if I'm wrong, but it doesn't reach out of the edge on the motherboard, what should I do?
View 4 Replies
View Related
Dec 22, 2011
When I put any 3 of my 4 memory chips into the first 3 slots on my motherboard the system seems to work correctly. If I add a 4th chip into the 4th slot the system won't boot.
I have 2 CM2X2048-8500C5D 2.1v v1.1. There are two sets of two. After getting these indications. I tested them using memtst86+ 4.20. Each chip was tested in each slot, 12 passes in each of the four slots. No errors were detected. The only thing non standard is my bios is configured 5-5-5-18 instead of the 5-5-5-15 it says on the chip. This is due to a motherboard limitation.
View 5 Replies
View Related
Jan 17, 2012
Equipment: Acer Aspire 5535 Laptop Originally running Vista Home Premium - no problem. I have updated to W7 and now on W7 Ultimate SP1 32 bit I can slot an DS card into the card reader and copy to/from with Explorer.
I then eject the device using Safely Remove Hardware and Eject Media icon in the rhs of the Task Bar.
I remove the card and then any other card slotted in is not recognised - including the original one. It does not appear in the Explorer window and is not accessible.
If I look on Device Manager, under Universal Bus Controllers, the eigth one down is USB Mass Storage Device and is showing an ! in yellow triangle. Right click on this brings up properties which tells me:
"Windows cannot use this hardware device because it has been prepared for "safe removal", but it has not been removed from the computer. (Code 47)
To fix this problem, unplug this device from your computer and then plug it in again." Well, if course I did remove the card but it don't see that
If I reboot the LT this is cleared. If I watch Device manager whilst ejecting the card, nothing happens till I actually, physically take out the card when it updates the window to show the fault triangle. I have checked for latest driver and am told it has the latest one. Other USB ports work OK.
View 14 Replies
View Related
Jan 15, 2012
I have a Radeon HD 4500 graphics card that's plugged into the PCI express slot on my motherboard. The heat sink on the graphics card is huge and covers the next PCI slot down completely which I now need. I don't want to buy a new graphics card as the one I have works fine and I can't afford a new one.I can take the heat sink off but I don't want the thing to overheat and blow.
View 9 Replies
View Related
Nov 15, 2012
my computer, a Lenovo Idea pad P580 running on Windows 7, is 5 weeks old and yesterday I was using Microsoft Word to edit a document and Word suddenly crashed. So I closed it, but then the cursor started spinning and I could not access anything on my computer so I rebooted and it started up but then just trying to open Microsoft Word caused the cursor to keep spinning again and I could not access anything. So I again rebooted and this time it was spinning from the beginning. So I again rebooted and turned it on in safe mode and everything was fine. Then turned it off and left it off overnight. In the morning I tried to boot in normal mode and it did boot but it was again spinning and I could not access anything. So I again rebooted in safe mode and I can use my computer fine.And also, this is unrelated, but I was wondering if anyone could tell me what I need to do to make the scroll bar stop moving on its own? Every time I scroll down a page it seems to lock the scroll bar and so when I move the cursor away from the scroll bar, the scroll bar still moves and I cannot click any links or anything on that webpage.
View 6 Replies
View Related
Aug 1, 2011
the computer I am concerned with is running Windows 7 with IE8, Microsoft Security Essentials and Malwarebytes Anti-Malware. I am currently in Safe Mode with Networking without issue.The owner of the computer says that something happened earlier today while he was online that sounds like some false antivirus popup, but he's unsure. Here are the symptoms in normal mode. Every application, from moving through them to opening and closing them, runs exceptionally slow - one to three minutes to open, at least a minute to open internet pages. I noticed that, when in IE, as the pages are loading the IE page disappears and reappears. I am not very familiar with Windows 7 so I don't know if it is related. The computer seems to be getting slower as the day goes on. CPU usage is very high.So far, I have disabled many startup items that were unnecessary. I ran CCleaner and cleaned up. MBAM was run in both normal and safe mode, full scans, and found nothing. This is also posted in Viruses and Malware, but I'm unsure where it should live.
View 2 Replies
View Related
May 8, 2012
window 7 working on safe mode and unable to choose the another restoration point and it is not loading in normal mode -after installed third party software worked on that for few hours, then after switched off and later it switched on then after this problem started, automatic repair done, nothing is notified
View 1 Replies
View Related
Nov 25, 2012
i recently ran into a problem with starting up my computer. I have the blue screen of death. I've tried safe mode. It won't work. I would click safe mode it would load and then go back to the blue screen. I have a lenovo laptop and I'm not trying to pay 150-200 for it!
View 3 Replies
View Related
Oct 8, 2012
I own an HP G-62-347 Notebook, Windows 7 64 bit, Microsoft Security Essentials, Windows Firewall, no other real time AV, no other Firewalls, Windows Defender disabled as Microsoft instrucs for MSE, 3 GB Raam, 313 GB HDD, AMD Dual Core P-380 processor.My Laptop began freezing 8-10 minutes after bootup logon. No matter what I was doing, Media, Excell, Word, it would freeze up and hang. Sometimes CTL_ALT_DLT would unfreeze it, even before the task manager appeared, but it will take 3-4 minutes with an o[ague screen and the progress "circle" moving then unfreeze, sork 1-2 minutes, freeze, etc. Then all clicks on something to activate would result in loooong (long) delays, 15 to 45 seconds, then the new screen or window or peogram would open, sometimes frozen up.This did not happen in safe mode.I have (on suggestions) removed all things from my start up or programs that other's have suggested, Google Update files, and three or four others that others had issues with that I found on the net. I have also removed programs that I had installed around then.
I have also run, in Safe Mode, MSE, MS Safety Scanner, MS malicious file remover, ESET online Scanner, my laptop is clean.I have used mscong to disable all non-microsoft items to see if that helped. It did not. Same issues.I have used startup repair, and after scanning received a message that there was a problem, but that it could not fix it, did I want to send a report to Microsoft, I checked yes and it sent me to System Restore, ran it for about a week ago which was when I had downloaded some software, and the problem still existed, which sent me back to System Repair, ran it, same error message, reported again.I used a Repair Disk to get back on the laptop a coulple of times when needed, but ultimately, the problem surfaced still.I have used ReImage Plus to rebuild all my defective Windows Files and a lot of my 3rd party defective files. And, I also did a Win 7 repair install.I am pretty convinced something is being loaded somewhere, but can't find where or who or what.Am I on the right track? Have I missed something? Am I wrong? I do not really want to do a clean re-install of Windows 7, for if I do I am reformatting everything to clean any and everything.... sort of NUKE it... but would rather find the culprit (for education purposes). And, I dislike installing and updating and setting up everything again more than I hate "boiled okra!"Anyone and Everyone that has had to do with this or similar sounding issue, please reply. I have two weeks invested, and would like to "graduate" resolving this and getting the learning experience of WHY?
View 15 Replies
View Related
