For those who might be interested, I have been using a DCR-2650 set up so the computer can go into a low power sleep mode when not in use. Besides loading the latest drivers, I have the computer and the DCR-2650 plugged into a "Belkin Conserve Socket with Energy-Saving Outlet" This turns the power to the DCR-2650 off when the computer goes into a sleep mode.
I have the computer (windows 7) setup to go into sleep mode after 30 minutes. The Windows media center keeps it on as long as it is recording or viewing anything.
It has been setup this way for about two months and so far the DCR-2650 has connected properly every time the computer comes out of sleep mode.
Whenever I press the sleep button on my computer, or when I leave it idle and it goes to sleep by itself, I get a blue screen of death. I would really like to solve thiNow, this computer came with an AMD video card, but I uninstalled those drivers and took out the video card and installed a GTX 570 from EVGA. The drivers are up to date, so I am pretty sure the new hardware is installed correctly. Furthermore, it was not doing this for the first few months of having the video card installed. This is very recent, so I don't understand what it could be
I know there are a bunch of sleep problems out there but I couldn't fine one similar to this after doing a forum search. Running Windows 7 Ultimate. Sleep used to work ok but now when I choose sleep from the start menu, the screen blacks out but the computer doesn't actually go to sleep. The fans, activity lights, hdd lights are all still running. If I move the mouse the screen comes back. However, if I just wait for the sleep timer to kick in then the computer does go to sleep (all fans stop running and all lights go out). I'm not sure what caused this. I use my pc as an HTCP and now when I push the power button on the remote the pc does not go to sleep.
I currently run Windows 7 ultimate 64bit, 8gig ram, intel i7-2600k cpu, and my OS runs on an OCZ SSD (all specs are in my profile)Sleep mode is set to S3 in BIOS, I have hibernation disabled (so no hibernation.sys file on my c drive)When I put my computer to sleep then immediately wake it up, the login screen shows instantly, I type in my pass and it loads in like 0.5 seconds.When I put my computer to sleep but wait for around 1-2 hrs before waking it, it shows the login screen instantly but after i hit login, it gives me the Welcome spinning circle thingy for like 20 seconds before I can see my desktop. That's like longer than my entire boot-up time excluding POST.Event viewer doesnt show any performance delay, and I dont think my OS drive (OCZ vertex 2) has a cache so I have it disabled. I'm sure all my mobo drivers and graphic drivers are up to date.
Sometimes when I click start and sleep on my computer (windows 7) the monitor will go to sleep but the computer is still running. I cannot wake my monitor up so there is nothing I can do to wake it up besides manually turning it off using the button on the computer case.
I have a Win7 Ultrabook. I'm using Areca backup software to backup my personal data.I created a Scheduled Task to run my backup weekly.I set it so that it would wake from sleep to run the task. But I'm having trouble finding a setting to tell it to return to sleep if it woke itself up. Is it possible to do so?In the alternative, is there something I can insert in my batch file (the scheduled task runs a bat file) to tell my book to enter sleep mode?
wreaks havoc with my Norton full system scan. It is scheduled weekly, but never does it, because my computer is on, but sleeping. How can I get the scan to not stop during sleep mode or scan if it's in sleep mode? I having to constantly unsleep my computer or change my control panel settings then change it back.
I started up my Del lap top after 3 mos on the shelf. First thing it did was update windows 7 by itself. Since then even the most basic web sites take forever to load and when they do things like changing panes and using the slider do not work. The log shows no failures except I tried to load Skype and the system quit. I uninstalled that.I log into a web site, like Huffingtonpost, Yahoo etc and they take multiple minutes to load. I tried to log into the del support site, well you can forget that. This message is being written on my main computer because trying to crank up your web site is impossible. My home page is msn.com. I tried to change it to Google think that was the problem.
I know this might be a dumb ? but why is it that I can restart my computer, have used 1bout 22% of my ram, put the computer to sleep for a short time, wake it, and have 18% or so of ram used after waking up? Just curious.
I have windows 7 ultimate 64-bit on HP DV4-1199ee. The battery is connected and it is working on power is plugged on. When I leave the laptop for long time, I found the the laptop has restarted. This tell that the computer restart instead of sleep.
all of a sudden my PC running 7 Pro 64 has started shutting down rather than sleeping. i have made no changes in terms of updates/software/drivers, so i cant think of any reason this should happen. it happens when left long enough for the sleep timer to cut in, or by going to sleep through the start menu.
this computer now goes to sleep for no reason I have looked in the power control and nothing is maked to close down at any time where else controls this
Whenever i try to sleep the com, then resume it from sleep 10minutes later, it seems to work. But let's say i let it sleep for 3hours or more - it starts up as if i did not shut it down properly - it displays the "start windows normally" and other associated options.FYI i disabled the hibernate option as i am using a SSD for boot (not sure if it affects the sleep function though).[CODE]
I own an HP dv6tqe-7000 and I have a pretty annoying problem. At random times the laptop won't go to sleep when I close the lid. The HP logo light stays lit even if I leave it alone for a couple of minutes. If I open it up the screen is blank, and both the power and WiFi light are on. The mute volume LED is off even though I had left it on before. The only thing I can do is hold down the power button to reset it.
I have no idea what causes this. Sometimes the laptop takes a lot longer to sleep than usual as well, up to a minute. I don't think this was a problem when I first got it about 3 months ago. The problem has been apparent for about a month now.
I tried updating the drivers to both the dedicated and integrated GPU, but unfortunately it still showed the same result. I know I updated my BIOS awhile back, but I don't know if that's the problem. I also bought a Logitech USB mouse I bought 2 months ago where you are just supposed to leave in the USB receiver.
At times it will go to sleep within seconds. I wish it would do this all the time because since I'm on campus I always have to put my laptop back in my backpack.
I bought a new notebook running windows 7 64 bit a couple of months ago After running a full system scan with Kaspersky anti-virus a couple of days ago I now have a bug with sleep mode - After going into sleep mode, the user with my picture icon is locked meaning that I can't enter my password to log back in - the password box doesn't show.With the ASUS face recognition scanner I'm logged back in, but everything is 'buggy' e.g. if I click on the start button and hover over that entire area it goes into sleep again, or if i click on the bookmarks on chrome it doesn't show them, instead it click on an actual site within the bookmarks.After going into sleep the only way to enter and return to a normal state is to click the 'switch user' whereupon, my user picture icon reverts with the password boxI have tried a system restore but this didn't work.
It never happened when I was using the PC. Once in a while after I stop using it and the PC should have gone to sleep , I find the PC off. At re-start, I get the message of the crash.
I left my computer over night on in sleep mode. I woke up in the morning and tryed waking it up by moving the mouse, pressing keys on the keyboard and checked my monitor, but when I hit input, it search for signal and didn't find one an when to sleep again. I think I already tryed everything. I also pressed the power button in hope it will wake up but no. I did an emergency shut down later on. After i rebooted it shut off after 3 seconds and then rebooted itself into sleep mode automaticly.
new machine (Home Premium x64). It seems to go to sleep based entirely on how long it's been since I touched the mouse or keyboard. If there's a program running, like a virus scan or a download in progress, it goes to sleep right in the middle of it. That's incredibly stupid! How do I make it stay awake when it's in the middle of doing something, even if it's not receiving input from me?
When I press on the sleep button, it will just bring me to the login menu where I enter my password. I typed in powercfg /requests into the command menu to see if there was something stopping my computer from sleeping.
My output was:
Display: None System: None Away mode: none
My computer was able to sleep earlier yesterday. I even tried to restore my Windows partition to 4 days before, but that did not fix it. The only significant thing that I did was messing around in Linux.
My husbands laptop has been having this problem now for a few weeks Win 7 32 been working fine for over a year. The red x showed up on the battery a few weeks ago saying replace battery soon. We all know this is NOT a windows 7 problem b/c MS says so I let it charge to a 100% and die on its own a few times and the x went away for a few days. Then it came back and now the computer will not sleep. Power setting on all the laptops are the same and have been the same. Low battery 10% do nothing critical 6% sleep. But when it reaches 6% it acts like it is going to sleep and then it starts again. I checked to see if there is anything new waking it but nothing shows up when I query it in cmd Also when I press the pwr button which is supposed to make it sleep nothing happens when on battery but when plugged in it sleeps.
I've been all over the internet trying to figure this problem out, but when I try to put my computer to asleep, it does as I described in the subject line. It's a new PC, though it was custom builtnyway, I've tried a dozen tips and tricks that haven't worked, and I'm sorry I can't remember what they all were. I've tried adjusting the Power settings, and tried changing options somewhere that said "Allow computer to sleep". With all the changes I've made, it should sleep
Have a Windows 7 computer running well for 2 months or so, but suddenly, it won't make itself sleep, but has no problem going to sleep with the start menu button. After a lot of Googling, I used "powercfg -requests" in Command Prompt (Admin Mode) and got SYSTEM:[DRIVER] FileSystemsrvnetAn active remote client has recently sent requests to this machine.So I Googled and overrid FileSystemsrvnet with "powercfg -requestsoverride driver srvnet system" and "powercfg -requestsoverride driver FileSystemsrvnet system" (don't know which one worked) but autosleep worked again.The new problem is that the connection will drop while I'm network sharing, which is what the override's supposed to do, right? Is there a better way to fix the insomnia problem?
This has happened several times during the last few days. My laptop goes to sleep by itself randomly while I am actively using it. The model is Dell XPS L502x.
I would like to set the sleep option for my laptop when on commercial power. I need to know what determines the state in which the computer thinks it's okay to commence sleep. Is it a lack of keyboard/mouse input or is the OS smart enough to understand that an application is running. I do not want the computer to start sleeping while Acronis is performing a timed image backup and I'm fairly certain that Acronis cannot wake up a computer that's sleeping to start its function.
I am using Win 7 Ultimate 64 and have a HP ASUSTeK Tiger LNA Hybrid TV Tuner. Everything works fine until mce has been running for about 20 min and the monitor goes into standby and the computer is still on.. I can´t wake up the computer throw my remote either so i have turn it off and this happens everytime..
I don´t know if this has something do with it. The monitor is a 30 inch lcdmonitor from HP LP3065 and is connected to both of the 2 existing dvi-inputs on my nvidiacard
I am using the drives for monitor, videocard , tvcard that been installed when windows 7 Ultimate 64 was installed.
I have a dell XPS1702x laptop Windows 7 64, this problem came up in the last 5 days after I installed a logitech M705 mouse and software.When ever I put my laptop in sleep or hibernate and start up again I get a blank screen, but the laptop seems tobe running I have to turn the computer off and then on again using the power button. My computer then restarts and opens in the Error Recovert Screen stating that the computer was turned off improperly and ask if I want to restart Windows. I have preformed a complete Virus scan with Nortons 360, I have updating all my software, uninstalled the mouse and returned to my old mouse and the software for the new mouse and the problem is still there.
