Resently I built a custom computer. I assembled it and it all looked good... but as it got to the startup of windows 7, just past the "starting windows" part, it reboots. Then I wanted to install windows 7 again to see if it would help. But when it gets to the "Starting windows" part, it stays there. I've tried countless things including: Testing the RAM, Changing the PSU, getting another windows 7 install disk, shifting the GPU. But none have worked the least.
What I am wanting to do is a custom install of Windows 7 Premium. I'm really no expert on all things Windows, but I have felt for a long time that simply installing Windows from the cd / dvd is not really the most efficient and "power user" way of doing things. I feel that in doing an install from cd / dvd that lots of things are added that are not needed, and that I do not have the kind of control over my operating system (where things go, etc.) that I could have.
I currently have windows vista home premium 64 bit installed, can i do a custom install of windows 7 professional 64 bit, or do I need to do a clean install?
I just got my mother's computer back from a repair shop (they've changed the graphic card, the motherboard and the processor, the hard drive stayed the same)
It is a SONY VAIO VPCEE25fx.
I used my Windows 7 Ultimate OEM CD I had when I bought her the computer. But then, at the Custom Install step, it says No drivers or hard drive found. I've tried to reload, scan...none. I'm sure the hard drive is ok.
apparently, the 300 GB of files from my previous OS are still on my harddrive, but I cannot find them. Yes, I'm missing the 300 GB on my HD when I click My Computer, but they're not in this fabled windows.old folder that allegedly has them. I've even used TuneUp Utilities to detect where the data is on my computer, and it can't find them. Bizarre. So, what's taking up all that memory, and, more importantly, how do I get to it?
New HD in Dell Studio laptop, partitioned. Have tried valid/new DVD installing Windows 7 ultimate, custom, for clean install on clean drive. Gets through first 4 steps in install to first restart/reboot while in "completing installation" mode, and quits to black screen, no blinking cursor. Have reformatted partitioned drive to remove old Windows 7 efforts, but still no change. If I do Ctrl-alt-del, I get windows boot manager with 5 copies of Win 7 available. Advanced option f8 offers nothing. Memory diagnostics fine. Selecting any one of these Win 7 goes to blank screen, no cursor.
I did a custom install of windows 7 from windows xp. Prior to the installation, I did not have any issues connecting to the internet via wireless router. Since the installation, I have not been able to connect to the internet even though the connection is available.i have the following:network type: Access pointsecurity type wpa2-pskssid is listed correctly and is available for connectionradio type 802.11Realtek 8185 extensible 802.11 b/gchecked adapter and is working correctlytried resetting the routerrouter: linksys e1000 wireless-n routeri have discovered the following issues: the wireless adapter is not connectedthe Attempting to authenticate message is displaying
Recently I upgraded from an old core2 duo to an i5-2500 quad 3.3GHz, 16gb Patriot ram, Asus motherboard. I noticed the first time I booted up something was wrong with the voltages for my PSU (Corsair 520w modular) which I had used previously. I didn't get the details of it time before Win7 started. After that I have noticed the fan died in my PSU, so I'm not sure if this is causing my BSODs. I am using an NIC and onboard Audio, and a Geforce 430 video card. The details of my bsod are below. This has been ongoing for weeks now and it's very annoying. I recently updated my Win7, restarted hoping that would fix it. Also I've scanned with AVG, SuperAntiSpyware, and Malware Bytes. I am out of ideas since I have a new install of Win7 64bit.
BSOD (occurs when playing games or just idle): Problem signature: Problem Event Name:BlueScreen
i have a desktop and bought an wireless adapter(i ball baton)and installed the drivers,every thing is working fine it also shows up the list of networks and i have an unsecured network,which is of my own and it when trying to connect it says windows was unable to connect to network.and my machine has win 7 on it?
I just finished my i3 build and am trying to get my Windows 7 Home Premium to install and am not having much success.
First of all, I want to note that I am trying to install from an external DVD-Drive via USB because it's extremely hard to get the Drives out of the old Dell computer. I either have to order new ones, or literally break that case.
Anyways, I've been messing with BIOS settings (mostly SATA config and USB legacy settings) and what not, but no matter what I try (seemingly) I get one of two things to occur:
1) The 'expanding Windows files' sticks on 0%
2) I get the 'Windows Cannot Install Required Files Error'
I'm back on default BIOS settings and am going to listen to you guys, because what ever I do doesn't work
I'm need to install custom non-pnp driver into system using inf file, but i can't find "Add/Remove hardware" or analogue. There is it in Seven? If it's not exist - how can i do this?
This driver is a part of signal processing for one of the programsm which is vital for me.
I have a .scr file that I am trying to install, which allegedly I am supposed to be able to just right click and click install that way. However, the install option is not showing up when I do this. Other people have confirmed that the file works and can be installed for windows 7, as well as have the install option appear, but why might I not be able to?
I did a custom install from vista to 7(32 bit) today.
I deleted all old restore points through the space management, however, the partition reads a still mostly full. There is only 1.8gb out of 8.3 available. When I access the folder, there is nothing in there, even if I show hidden files.
I believe it is remnants of my old vista recovery drive, which I did not erase prior to my upgrade and was always equally full to what it is now.
How would I go about eliminating these files now so I can backup my new OS installation?
ive got a dell xps 1530 laptop running on vista business 32 bit ,4gb ram, intel core 2 duo t5450 166ghz and a 250gb hd partitioned into 215gb os ntfs [c] 15gb recovery ntfs [d] 2.50gb media direct fat32 [f] 134mb unallocated and 2.50gb
i want to upgrade to 64bit
ive got a 64 bit windows pro upgrade disc from software4students ,ive tried to do a custom install and get the error code 0xe0000100 ,searched the web and read up on it ,can anyone give me any advice on how to install it,ive got no addional discs as the dell came with it all as a image on the hd,got the proper licences and keys tho.
I have a new Dell Precision T3400 which the Windows 7 Upgrade Advisor says I can run the 64 bit version of Windows 7 on.I am running XP pro 32 bit version on it. Dell told me I would need to run my 64 bit disc by hitting F12 when rebooting to boot to the disk. The computer then asks me if I want to run from my array or from a usb or cdrom. I choose the cdrom and then is says it cannot start from that drive or some such error. Dell and I did these things:made sure the dvd was an option as a boot drive in Setup.Updated the bios on the drive and the computer itself. this did not work so they replaced the dvd drive. It still will not boot the disk. I tried my xp disk, and the computer WILL boot from it. Dell said its the disk.
I am trying to upgrade my Vista 32 bit to Windows 7 32 bit. Since my Vista is the home version and the win 7 I've purchased is professional, I have to do a custom install, which basically deletes all my programs and drivers. My notebook, however, didn't come with any drivers when I purchased it. All it asked me to do was make a recovery disk.
So my question is, how do I find said drivers? I've downloaded a few off HP but do those require existing drivers or can I use those after the Win 7 installation? My main concern is my ATI Mobility Radeon 3200 and CCC.
I have two simple questions, but I cannot find definitive answers .
>I have windows vista business 64bit (language: Dutch) >I want windows 7 professional 64bit (language: English)
I am going to use upgrade media to upgrade vista to 7.
1. Can I change the language from Dutch to English if I do a custom installation? Answered: yes 2. Is it a 100% clean installation if I do a custom installation and format during this procedure? Answered: read thread
Ad 1: If you do a custom install, formatting the drives, the language difference between vista and 7 is not a technical obstacle. So it comes down to licensing: does Microsoft accept this?
Ad 2: I do not want to use any 'registry workarounds'. But since people are using them, I'm wondering if a custom installation (with formatting during this process) indeed is a fully clean installation. The different tutorials are very confusing on this matter.
I've been playing around with the OEM folder used for custom branded OEM installs. I've figured out how to set the OEM info and add custom wallpapers and screen savers to the install media. What I haven't figured out is how you actually set the default wallpaper or screen saver during the install? If someone knows where the info is stored in the registry I can probably do it with a reg file like I do the OEM info displayed on the system screen. I've been testing by installing from a USB thumb drive. Once I have everything the way I want it I'll burn a DVD of the final version.
I just did a custom install from Vista to Windows 7 with an upgrade disc. After completing the setup, deleting windows.old, and reinstalling all of my programs, I noticed that there were old folders on the C: drive. It is as if it didn't move anything from the root drive to the windows.old file.
I'm annoyed at myself for not noticing it sooner. Now I don't want to do another install since I spent all that time reinstalling the programs and configuring them for personal use.
I'm tempted to go in and just delete the old folders from the root drive, but I'm nervous. Honestly, I can't be certain of what should and shouldn't be there.
Is there anyway I can tell which folders on the root drive are leftovers? I thought about deleting according to the date modified stamp, but I'm not certain that is safe either.
Can anyone advise me? I really don't want to do another install of Windows 7, but I was pretty excited about starting with a true clean slate. I just can't help but wonder what else it left behind.
I downloaded the student edition of windows 7 Home Premium, I am currently running Vista Ultimate so cannot do an upgrade and have to do a custom install.
I downloaded it fine, ran it, it opens up fine with the blue windows 7 opening screen, I select install, then select custom install. In the next window I have an empty white box which I presume is supposed to list my HD's allowing me to select where I want to install Windows 7. None of my HD's are showing up, I'm given the option to browse or scan, when I select this it gives me the message-
No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK Any suggestions?
Probably been asked before, but I had a quick search and couldn't find much.
On my system, I have Linux Mint as my primary OS with XP for gaming. Is it possible to install 7 to a custom location so it doesn't overwrite the existing installs?
Is the time to "Upgrade from vista to 7 supposed to be way longer then it would to do just a clean install? (For example, hanging at 18% for a while while installing during upgrade).
I have just discovered that I cannot do an Upgrade from Vista HP to Win 7 Pro and that I will have to do a Custom or clean install. That will be OK and doesn't cause any problems.
I have XP on one HDD and Vista on another with dual boot. However I want to replace Vista HP with Win 7 Pro 32 bit, ( I intend to go 64 bit later on).
What I would like to know is, will Win 7 replace Vista on the boot sequence (MBR?), so that on booting the PC I have the option of selecting either XP or Win 7, or will I be presented with a boot menu of XP, Vista and Windows 7, albeit that Vista is no longer installed? If the latter, will this cause any problems in selecting the OS that I want to launch i.e the MBR looking for a now non existing Vista and would there be a way to remove reference to Vista?
I'm well aware that you can boot from the CD and do a quick format during Windows 7 installation, but that's not what I need. I want wipe the disk in it's entirety before installing Windows. I'm getting some weird messages about disk errors during start-up and the EVGA tech support suggested that my last fresh install (done earlier today) didn't remove everything that was on the hard drive. I can't remember what he called it, but he said it could be less than a kb and cause the motherboard to try and boot from a partition that doesn't exist, giving me the errors. Is there some kind of formatting utility I can burn to a disc and wipe my local disk with?
was wondering if the custom installation option would delete my files that are located on hard drive D, I know that it would totally wipe out C but does the same happen to the other hard drives ,cuz I really have a lot of files and their size is more than 100gb :/ how many usb's am I gonna need for this, it's impossible
ive searched a lot in google and had not found any answers..My problem is some Custom Sounds are not working..for example, ive customized Minimize event and change it to an existing Windows Default sound, i press PLAY and its working, hit APPLY then OK..but its not working..tried it on other events, and still does not work,the other thing i noticed isi cant UNCHECK the option "Play Windows Startup Sound" (its greyed out)I've modified imageres.dll (mainly because of my theme) had edited on my own and had not touch on the wav files.
I want to create a utility software where i can create my own custom commands like copy, rename, move, delete etc. But i don't have any idea how shouldWhich language i should use to create it?OS Platform : Windows 7
I have recently purchased a custom built PC from a company and I have included in it an SSD for the operating system and programs, and a 1TB HDD for storage both are brand new with no data installed. Once I receive the PC I will be installing my own copy of Windows 7 Ultimate 64 bit. I have read on a number of forums that I need to unplug the HDD before completing the clean install of Windows 7 onto the SSD otherwise the boot partition will install onto the HDD if I keep it plugged in. I cant find any user guides/videos tutorials for this situation so would appreciate it if someone could confirm if its best to disconnect the HDD as I dont want to start taking the side of the case and unplugging the HDD if its not required.
