I just installed windows 7 upgrade from vista and system won't boot. I can start in safe mode. Startup repair "cannot repair this computer automatically".I ran all of the troubleshooters and it seems hardly any of the services are running and the computer can't start the service. Windows explorer can't start.
View 3 RepliesI have used windows 7 for some time now and am qjuite happy, however.I just recently upgraded to the latest verson and now my HP tablet 64 bit amd turion wont boot.
View 1 Replies View RelatedI purchased an HP latop right when Windows 7 was coming out and the HP laptop had Windows Vista when I bought it but I was sent a free upgrade to Windows 7 Ultimate by HP during the time when they were selling laptops with Vista and sending free upgrades.So what I want to know since the fan stopped working some time ago, (cooling it with a small fan from Walmart sending air around and inside it somewhat) on the HP laptop I purchased and recieved the free upgrade. If I return the HP laptop to factory settings (did a complete backup when purchased) and put Vista back on it, can I use my Windows 7 Ultimate disk in a newly purchased laptop since it will still only be on one laptop since I am returning the old one to Vista?And do I have to uninstall Windows 7 Ultimate with the Upgrade disk so it knows it's no longer on that computer. In other words are they linked by some type of serial number on my HP laptop that only allows me to install the Windows Upgrade disk on that specific machine?
View 1 Replies View RelatedI am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
View 4 Replies View RelatedI would like to install 7022 onto my hard drive. Problem is i am unsure how to proceed because on another internal hard drive i have ubuntu installed. Now both OS are installed to different hard drives yet ubuntu has its boot manager installed and this gives me the option of booting either 7 or linux.
Im just looking for some guidance as i do not want to screw over the boot manager performing an upgrade.
I have also taken a full TI image of the computer just incase.
Is there any way to do a upgrade from vist to Windows 7 from boot, as I cannot access vista, got damaged beyond repair.
View 9 Replies View Relatedi accidentally bricked my old motherboard, so I upgraded to sandy bridge with a new motherboard, processor and RAM but now windows tells me it is unable to boot. I have a i5-2500k and a Asus p8z68-v motherboard
View 16 Replies View RelatedI know that I can upgrade from XP to Windows 7 in the same computer, problem is that my computer is too old and does not have what it takes to handle Windows 7. Can I install my XP in a new computer and then upgrade to Windows 7?
View 4 Replies View RelatedI have 3 HP machines (out of warranty) with Visa on them and will installing 7 Pro on them. Clean install vs. upgrade...The computers have been slowing down over the past 2 years so I'd like a fresh OS installation. Will the upgrade option be starting fresh enough or is a format the better option? I know it will be more work but that's OK. And how about HP stuff? Most of it I don't use but there's stuff I'll need, right (drivers, etc). I don't even mind their Update software.
View 5 Replies View RelatedI have an ASUS N61Jv that came stock with 4 GB DDR3 RAM. Everything else is stock on the system except for a 500 GB Seagate Hybrid drive. I'm trying to upgrade to 16 GB (2x8 GB) and my install of Windows 7 Pro 64-bit fails at the loading windows black screen and reboots. "Attempt Repair" option fails, as well as trying to load the setup disc. I made sure UEFI setup in BIOS is disabled so as to not effect the Windows 7 boot disc.I would start to think it's a hardware issue, but BIOS recognizes 16 GB and I can boot into Ubuntu 12.10 (dual boot setup) and look up with an app that reports 16,xxx MB of RAM so I see Ubuntu can pretty much recognize the new RAM sticks as well.
View 7 Replies View RelatedI'm running XP pro and would like to know if I can use a Win 7 pro upgrade DVD to make a dual boot system.
I would not be keeping it that way for long but I'm not happy going completely over to Win 7 in one go
OK So to begin Im upgrading from windows XP Professional.. Before I decided to up grade I ran into this error on my PC: C:windowssystem32configsystem missing or corrupt
I tried the recovery disk and pressing r and typing in the commands in microsofts website and it said: access denied (or something along those lines) Ok so I gave up on that and when I start the computer I can go into BIOS and everything but as soon as it hits the screen where "windows didnt start last time, safe mode, blah, last known good configuration. If select any of them it freezes and if I allow the countdown it usually goes to a white / black screen and says that error up there ^^.
We couldnt get it fixed so I decided that I would upgrade to windows 7 and I purchased it online and downloaded it and it WILL not work with the computer. I go into BIOS and set CD/DVD first and press a key to boot from disk and it just restarts as soon as it loads and keeps redoing it. Occasionally Ill get a " the file is possibly corrupt, the file header checksum does not match the computed checksum.
I have a netbook running on N280 Atom with 2 GB of Ram and 2 partitioned drives at 72 GB each.
I have XP home edition installed on the C: drive and want to install Win 7 on the D: drive in order to dual boot.
The problem is that I have a Win 7 professional "upgrade" disk.
My question is: If I already have XP installed on the C: drive, will I have a problem (or is there any cons) with attempting to install Win 7 to the blank D: drive being that it's just an "upgrade" disk as opposed to a full OS disk?
Should I even try to do this?
The reason I'm even thinking of attempting this is because I get a super discount on the upgrade being that I am an adult atending a university. You cannot beat the student discount of $29.99 for Win 7 professional.
I don't want to shell out $200 for the full disk unless I absolutely have to...
I screwed up and ordered Windows 7 Pro before I realized I couldn't do an upgrade from Vista Home Premium. I really don't want to resintall all my programs. So I'm thinking about installing a new drive, and doing a dual boot setup with Windows 7 on the new "D" drive. Question is, can I do this with an upgrade version of Windows 7, or do I need the full version?
View 8 Replies View RelatedI am trying to install windows 7 upgrade from a bootable dvd. I get the prompt to install and then it thinks for a while and comes back with the message:"A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now.
Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step."
I looked around the web and noticed this was a common issue with Vista, but I cannot seem to get it past this point. I have tried pointing it to any and all possible drivers I can think of for the IDE, SATA, motherboard, etc.
Then I decided to just try it from within windows xp, and it worked. I was able to install everything fine. So my question is if it can be installed from the disk like it appears everyone is saying, or if certain hardware requires it to be done from within windows.
I tried copying the driver folder from the system32 folder after 7 had been installed hoping the needed drivers would be in there, but when I browsed to it, it said no device drivers found.
Any suggestions around this? Is it even necessary? I am wanting a system that would be equivalent to formatting the hdd and then installing. Do I get that by installing within XP and then deleting the windows.old folder?
This is a relatively older Dell XPS 400, although everything worked fine once 7 was installed from within xp.
Yesterday I upgraded one of my computers from Windows Vista to Windows 7. After the install completed and the computer restarted, it shows the Windows 7 "Starting Windows" screen and then loaded a black screen after that, and after a long time with the harddrive light blinking, the computer restarted itself and then stuck at the same black screen again.
I tried putting the Windows 7 disk back in the computer and running startup repair, but it said it found no problems.
I replaced the motherboard, CPU and Video card on a fully updated Win7 system. It is a dual boot with UBUNTU 11.10. Ubuntu works fine! windows wont boot. Startup repair finds no errors. I am thinking it is the hardware abstraction layer (HAL).I don't want to lose every thing, although I could use UBUNTU to copy files to another disk.
View 3 Replies View RelatedI'm upgrading my desk top soon: main use email, little browsing, and lots of photos. Need to run Lightroom 3.6 and Phtotshop., however I am an amateur photography, not a powr user. I don't use games. Question is Win 7 or Win 8 . This could either be an upgraded system or new system. I suspect a new system, as some hardware not compatible with current.
View 2 Replies View RelatedMy laptop recently broke so i am purchasing a second hand desktop and it has no OS on it i was wondering if i can use the windows 7 upgrade to put it on the desktop instead of the full one as it is 80 euro cheaper.
View 2 Replies View RelatedToday I got 2 new 4GB sticks of Corsair Vengeance Blue RAM to go with the 8GB I already have in my system (same RAM as well). After all 4 sticks were installed, my computer failed to power on properly. It would power on for about 5-6 seconds then shut off, and continuously try to start up again, only to shut back down. I did have a few minor overclocks in place so I went into BIOS and reset everything back to default, but the computer still refuses to power on with all 4 sticks in place. I've tried different combinations of the 4 sticks and they all work fine as long as all 4 aren't hooked up at the same time. My PSU is 650W if that helps. I really doubt 2 additional sticks of RAM is making much difference in power usage.
Note: As to why I need/want 16GB of RAM, I play around with Photoshop + do some video editing in After Effects and Premiere, and I found myself maxing out the 8GB I had rather easily.
I bought a HP desktop a few months ago. I thought it was outside the 'free upgrade' period,so I bought the Home Premium upgrade when it was offered for half price. I installed the purchased upgrade when it was released, but I've just found out I qualify for the free upgrade from HP.
So -- a friend is looking for Windows 7. Here are 2 scenarios I'm considering:
1) Can I install the HP upgrade on his computer? Or is there something that restricts the use of the HP upgrade only for use on HP systems?
or
2) Can I use the HP upgrade product key on my system and use the key from my purchased Windows 7 Upgrade on my friend's computer? If I change keys, does it automatically make the old key available again for installation on a new system?
I'm using Windows 32 bit, after I upgrade to 4GB RAM, and change my OS to 64 bit.
1) I see my computer really slower. I'm using one background program is Norton internet security 2012. does it make my 64 bit computer slow?
2) Before I upgrade from 2GB to 4GB, I just use about 1-1,5 GB RAM (and when no software use, just 800 MB). But, when I use 64 bit version with 4GB ram, windows start with 1,4 GB ram, and when i use software (like before), it turn to 2,5-2,7 GB?
I just pre-ordered the student offer Windows 7 upgrade to initiate building my own computer after countless blue screen restarts on my old laptop. Now I've done some reading im not sure if i can even use it.I have a laptop which came with Windows XP Home and I'm hoping to build myself an i7 desktop after the release of windows 7 (with 64 bit professional).Can I install the upgrade on my new desktop using the key from the laptop?
View 18 Replies View Relatedafter I upgraded MB, CPU & RAM, without reinstalling W7, system works fine except some programs freeze. Programs that freeze are firefox, thunderbird, utorrent, windows explorer, Freeze last for couple of seconds and usually unfreeze, but sometimes I must end firefox in task manager. I tested RAM with memtest 100% OK, I didn't OC, everything is in default settings,
View 14 Replies View RelatedI have upgraded a machine from an Intel motherboard to an ASUS P8H61-M LX. New CPU and RAM. Before installing the new hardware I changed all drivers to standard drivers, did a system image to an external HDD. After installing the new hardware Windows hangs with 4 little colored dots on the screen (start of win banner?). A safe mode boot stops at classpnp.sys. The same thing happens if I try to boot from the WIN CD. I went back to the old hardware setup and tried to do a sysprep, but that failed with fatal error, but no more info. The HDD is set to IDE, using a PS2 mouse and keyboard. I cannot do a clean install as there is some very old software on the machine.
View 1 Replies View RelatedI have recently upgraded from the Beta to the RC. All went well, except for one issue. I can no longer access the boot screen to choose which of my dual-boots I want.
I have a wireless USB desktop, and whereas previously this was available to access the boot screen, since the upgrade it is only available after the Windows splash screen shows.
Has anyone else experienced this? If so, is there a fix?
It's not a major issue at present, but could turn out to be if, for any reason, I need to access my XP boot.
(I know that I can more than likely access it if need-be by connecting a PS2 keyboard, but I would like to avoid that hassle if possible)
I have an Acer Aspire M5100 Desktop that was running Vista 32 bit. I tried to upgrade to Windows 7 and am now stuck. I think it is either a problem with BIOS or with an incompatible graphics driver. After the upgrade process (I did not do a clean install), when the computer rebooted for the last time, the screen went black and it it did not advance past a certain point. The error message read, cannot boot from CD.
Since then, when I turn on my computer, the screen goes to black. That's it. If I push delete, I can access BIOS. Even when the boot priority is the CD Rom, nothing happens. I cannot access a GUI to make changes to drivers, etc. With all of the known incompatibilities this computer has with Windows 7, it probably would be best to return to Vista. Ideally, without a clean install because of all the software and files on the computer. But I understand a clean install might be necessary.
How do I use my Vista recovery CD when there is no GUI accessible? Can I do this through the BIOS menu? I am not good with command prompt coding, so if that is mandatory. Unfortunately, I do not know the exact computer specs, again because there is no GUI. The best I can do is this Acer website: Acer Support: Aspire M5100 Specifications.
I've just tried to upgrade my PC's memory from 8GB to 16GB and have hit a rather worrying problem in that the PC now refuses to boot. Initially, once I'd replaced the old memory modules with the new ones, I got three beeps on power-up, which I quickly established was the result of my not properly seating the modules. Once I'd made sure they were firmly inserted I tried again, and this time all I get is the computer powering up - so all the lights come on and the fans kick into life - but then it powers down again without even attempting to boot: I don't even get to the BIOS. After a few tries I decided that it might be an issue with one or more of the new modules, so I swapped them back to the original 8GB kit and I still get the same problem. My PC is essentially DOA. Whilst I was inserting/re-inserting modules I did try to avoid and issues with static discharge. I wonder if perhaps I've disturbed a connector somewhere, although I couldn't see any signs of this when I re-opened the case to check.
The new modules are a 16GB Corsair Vengence DDR3 dual-channel 4-module kit (4x4GB). They were replacing a 4 module 8GB DDR3 dual-channel kit (4x2GB), so in both cases all four slots were in use. Motherboard is an Intel DP55WG, which is listed by Corsair as being compatable (16GB is the max for this motherboard). I've been running this system for two years prior to my upgrade attempt this evening, and it's been rock solid with no issues.
Maybe I should reset the CMOS for instance? Note that I'm not a hardware guy, and messing around inside the case isn't something I normally even consider trying... But I thought that this would be a very simple, trouble-free upgrade!
I am trying to perform a clean/custom install of Windows 7 Professional 32-bit on my VAIO SZ-650N. I have the upgrade disc and though its primary purpose is to upgrade from Vista to Windows 7, it is confirmed to work with clean installs as well. Since I want to perform a clean install, I must boot the installation from the disc and not within the OS. The problem is that when I insert the disc into the drive and start up the computer, it'll pause for a moment longer than usual, as if it detects that the CD is there, like I can hear the disc spinning in the drive, and this little gray underscore will blink on the screen, but it will never give me the "Press any key to boot from CD" message and it'll eventually just load up my OS.The disc is in perfect condition and I can view its contents and run it from within the operating system...I just can't boot from it. Even the directions for clean/custom installs that come with this disc say that it must be done from the disc, not when the OS is loaded. The problem can't possibly be my BIOS startup order, because first of all the disc drive is selected to load first thing and when I insert other bootable CD's such as my beta copy of Windows 7, I can boot from it fine.
Edit: It will not let me do a custom install from within the OS regardless because it is unable to detect any drives/partitions to install Windows 7 onto. And the "advanced" option isn't there...I'm guessing because it's impossible to wipe the drive clean when the OS is already loaded.
Well i am currently running Vista Home Premium sp2 and Windows 7 Ultimate (build 7100) in a dual boot config for about 2-3months and loving it. I was wondering if i could upgrade my Windows 7 install to RTM without affecting my Vista install? Do you get a choice which OS you want to upgrade or does it go by what OS you load the upgrade disc from?
View 5 Replies View RelatedMy toshiba c650 laptop recently acquired a virus and now it will not boot. I was running windows 7 home premium 64bit at the time with ubuntu 11.10( I think) my computer crashed while I was running a mcafee scan and has not booted since ubuntu also does not boot due to the windows 7 system failure. Any way I was wondering if I bought a windows professional 64bit upgrade, could I Install it from boot? I also need to know if it would wipe all virus's from the hard drive. It would be best to mention that I have tried safe mode, safe mode with networking, my recovery discs and a blue screen repair discs all that happens when running these is a black screen with white cursor I left them all for an hour to see if anything happens but sadly nothing does.
View 8 Replies View Related