I have a digital SLR camera, the Sony A200 and when I connect it to the computer running Windows 7 premium I get no response from the computer.The camera should automatically appear on screen with prompts to import pictures or view them.
View 7 RepliesI have a HP Pavilion DV4-1030en. Specifications:
Intel Centrio 2 2,00GHz
4GB ram
nVidia 9200m GS
So, these are giving the main performance to my machine. I have also a nice Samsung D5000 TV (32" ) FullHD. When I connect my Laptop with a TV, computer start lag. It even doesn't use all of CPU (20-25%, while playing 720p video in TV with 10 fps (Fraps)). I've all latest drivers and everything should work. Using Windows 7.
I have an Acer Aspire laptop running Windows 7 Home Premium x64.
I regularly connect it to my TV monitor via HDMI cable and fall asleep watching movies (played on VLC or Windows Media Player). I set the computer to go to sleep after 1 hour.
Multimedia Settings are set to "Allow computer to sleep" under "When Sharing Media" in the Power Management section.
Screensaver is disabled. I have overrided my audio driver, since powercfg command suggested it may be a conflict.
If I am playing a movie without the HDMI cable plugged in, the computer goes into sleep mode right on schedule. It is only when I have the HDMI cable plugged into my TV monitor, that it refuses to enter sleep mode.
Here are the computer specs of the computer:
Ultimate SP1 64-bit
Xion 600W PSU XON-600F14R-201
Asus M2N32-SLI Deluxe Motheroboard
nVIDIA nForce 590 SLI Chipset
BIOS Revision 1402
NVIDIA GeForce 8800 GTS 640MB
AMD Athlon 64 X2 Dual Core 6000+ 3.15 (15 x 210 FSB)
Muskin 4GB (2 x 2GB) 991587 DDR2-800 SDRAM 5-4-4-12
Koolance EXOS2 Watercooled
OS Drive: Seagate Barracuda ST3500820AS 500GB
DATA Drive: Samsung HD501LJ
NVIDIA nForce 10/100/1000 Mpbs Ethernet
Realtek RTL8187 Wireless 802.11b/g 54Mpbs USB 2.0 Network Adapter
The CAT 5 Ethernet cable network cable is attached to our main Linksys WRT320N DD-WRT router ---> Motorola SB5101U DOCSIS 2.0 Cable Modem ---> Coaxial cable from wall outlet. Another computer is also directly connected to the same router via CAT 5 Ethernet cable and two more computers are wirelessly connected to the same router and none of these three PCs are experiencing issues so this should rule out the router as the culprit.if I leave the computer on (even for hours) with no network cable attached to the computer, it does not turn off. But as soon as I plug in the network cable, the PC will shut itself off within 5-15min.Based on the same scenario as described above, here are the troubleshooting attempts I made without success, except for numbers 4 and 6:
1. Switched to different network cable and router port.
2. Disabled Network Adapter connections in "Network adapter settings" for both the onboard ethernet port and wireless adapter.
3. Ran MSCONFIG.EXE and rebooted in diagnostic mode. Only basic Windows services are loaded. No startup programs are loaded.
4. Rebooted in Safe Mode with networking but could not establish any network LAN/WAN connection. Computer did not shut off!
5. Cloned entire hard disk to another hard disk and switched SATA data and power cables on the same computer.
6. Installed fresh Windows on different hard drive on the same computer. Computer did not shut off!
Out of those 6, only numbers 4 and 6 were where the computer remained on and didn't shut off at all after the network cable cable was plugged in.
I want to setup my IP Camera, and of course I need to do it via ethernet cable. So, when I put the IP address e.g. "192.168.1.102" in a browser (tried with IE9, Chrome and Firefox) , my Laptop doesn't even load or kept loading.This happens when I'm using Win 7 Home Basic, but with a Win XP laptop works great.
View 6 Replies View RelatedWhat does that mean? I have a PC, which is connected to the Router via a cable, besides that, two more notebooks use the Wireless network provided from that very router.
View 9 Replies View RelatedI want to setup my IP Camera, and of course I need to do it via ethernet cable. So, when I put the IP e.g. "192.168.1.102", my Laptop doesn't even load or kept loading.This case happens when I'm using Win 7 Home Basic, but with a Win XP laptop works great.
View 2 Replies View RelatedI have an annoying problem with my pc running Windows 7 Ultimate.Till I connected my pc(which is a desktop without wi fi adapter) to internet using a ethernet cable and a wi fi router I had no problems. After that, randomly, but especially when browsing the internet, the computer freezes and I must restart it.I have to mention the fact that if I connect my pc to internet using directly the cable from my ISP ( a pppoe dial-up connection) everything works fine.
View 3 Replies View RelatedMy wireless connection only connects when the network cable is connected. If I unplug the RJ45, the wireless won't connect. This is so dumb.
View 1 Replies View RelatedI have connect my laptop using an HDMI cable to my TV. And from my tv I have connected my two HiFi speakers. When the TV is on an AV channel I have sound coming from the TV and HiFi speakers but when I switch it to the HDMI source channel, sound only comes from the TV and not HiFi speakers.This is frustrating because I want to watch movies on my TV through my laptop and get the feel of some surround sound through the HiFi speakers but it is not working!
View 2 Replies View RelatedI have been having some trouble with Windows 7 and an ASUS A8V-Deluxe motherboard (K8T800). Windows 7 will not recognize that a network cable has been plugged in, even though the network cable and switch port tests ok on another PC. I've also tried a number of network cables CAT5e/CAT6.
Previous OS was Windows XP and everything worked fine.
System specs:
Asus A8V-Deluxe (939)
Athlon 3500
2GB DDR400
NVidia 6600GT 256MB
250GB IDE Hard drive
LG DVD-RW (IDE)
Background: Started with a BIOS reset and a clean install and format of the hard drive every time
1. Installed Win7 x64 - Network Cable Unplugged
2. Installed Win7 x86 - Network Cable Unplugged
3. Installed Win7 x64 & added a known-to-be-working Intel Pro 100S NIC - Network Cable Unplugged on both NIC's
4. Installed Win7 x64 & added a known-to-be-working Intel Pro 100S NIC - Network Cable Unplugged on both NIC's
5. Disabled Onboard NIC and re-installed Win7 x64 - Network Cable Unplugged (Pro 100S)
6. Disabled Onboard NIC and re-installed Win7 x86 - Network Cable Unplugged (Pro 100S)
So it would appear that something else is causing the Network Cable Uplugged issue, it looks like something within Windows 7, rather than a physical problem with the NIC.
I have tried disabling IPv6, but that makes no difference.
I have tried a couple of BIOS versions, maybe if anyone out there has had any success with this MB and Windows 7 they could recommend a BIOS version?
I connect my laptop to my Sanyo tv and keep getting no signal what should i do?
View 1 Replies View RelatedI have some trouble to connect to my camera IP (E50 Ranger-SICK IVP). I was on windows XP before, and everything was going well. Now that I have a Windows 7, I can't set up the configuration of my pc to connect to my camera.What I have seen is that after setting my configuration in Windows 7 as in the XP's OS, I have got a No network access. I can't either ping my camera and my computer itself using is its IP.My camera IP is 192.168.0.5.On XP, I have set up only an IP adress and mask (192.168.0.2 & 255.255.255.0) and it was working correctly.
View 6 Replies View RelatedMy computer runs on Windows 7 Home Premium SP1. I downloaded the latest installation software for my Lexmark X7675 Professional inkjet printer and installed it. I chose the USB cable option and when I plug in the USB cable driver installation proceeds without problems until it says that the drivers has been installed correctly and the printer is ready for use. The printer is also available on the Printers and Drivers manager of Windows. But, to test the printer, I tried to print a page from MS-Word by clicking Ctrl + P> OK. The document is sent to the spooler where it just sits with the status "Printing". Furthermore, when I try to adjust the printer properties from Word by clicking: Ctrl + P> Properties, the window just freezes and there is no response.
Also when I click: Ctrl + P> Find Printers, in MS-Word, a fault message immediately pops up that says: "The Active Directory Domain Services is currently unavailable". I sometimes also get a Lexmark error message that says that there are communication problems.
I already spent a day installing and uninstalling the Lexmark software and drivers, as well as various other tricks offered by the Lexmark fault wizard. I found that sometimes when I reboot the computer that the document hanging in the spooler gets printed out while rebooting. However, the printer can't seem to print normally when I click print or when I try to print a test page from the printer's options box. The printer is coupled by means of Wi-Fi to the home Wi-Fi network and another computer prints faultlessly to the Lexmark with the same software and drivers but just using the Wi-Fi option. How to get this computer to print via USB cable.
my system cannot detect camera through firewire
View 1 Replies View RelatedI have a Dell Inspiron 1545 laptop. I recently developed hard drive trouble and have had to order a replacement.Instead of installing Windows 7 all over again, with all the drivers, etc., I want to clone my existing hard drive to the new one.I intend to connect one of the hard drives to my system via a USB SATA cable with the other drive connected inside my system.
View 2 Replies View RelatedCamera window does not detect camera.
View 2 Replies View RelatedI have a new gaming computer with a high end video card and plenty of RAM and a high speed cable Internet connection. I also have a HDHomeRun TV cable unit which is listed to work with MS Media Center. When I set up my Media Center/TV connection it recognizes my HDHomeRun TV connection and all three TV channels via my MCard I got from Comcast cable. But next to the last dialog window, during setting up my TV connection, I got the following message, "Your computer is not digital cable ready. You will not be able to set it up for use with a cable card."
View 4 Replies View RelatedI have connected my hdmi cable as usual but this time i had on tv display NO SIGNAL. When i connect another pc to check the cable it seems to work correctly.The problem is coming from my pc.
View 5 Replies View Relatedi HAVE TO GET THE INFORMATION ROM MY OLD COMPUTER TO A "CLEAN' USED COMPUTER. IT HAS BEEN SETUP FOR WINDOWS 7. bECAUSE OF MY WIFES SURGERIES AND THE UPCOMING ONE, WE HAVE TO DO IT OURSELVES. I HAVE A ETHERNET CABLE TO GO FRON COMPUTER TO COMPUTER, BUT THATS IT. I WAS HOPING TO PRINT OUT THE DIRECTIONS AND DO IT MYSELF.
View 5 Replies View Relatedand then after its been on a while it goes blank. and computer goes in sleep mode and i cant wake it up.. have to turn it off and back on
View 1 Replies View RelatedMy computer says that it does not reconized my usb cable. I'm trying to download a video from my camera and I hear the ding but I can't find the file. What do I need to do?
View 1 Replies View Relatedi have setuped all compute r wires but when i on the computer is telling that please checkvsingal cable
View 1 Replies View RelatedI have a dell laptop, is there anyway the camera take photos when the object is behind the computer instead of in front of the computer?
View 4 Replies View RelatedMy windows home server has decided to stop communicating with the client machines.The connector software won't connect (reinstalling makes no difference), remote desktop times out, manually shutting down (by pressing the power button) and restarting also fails to correct the problem.I can ping the server (average response time 3ms)The Home Server machine is headless and although there is a connector the only monitor I have doesn't fit the connector.I susoect that the internal battery may have gone flat and may be the servers clock is out of sync with the client machine (but even when the server is asleep its still connected to the mains).
Someone has said that I can connect a laptop to the sever via an ethernet cable but the only instructions I can find say that I have to set the IP address on both machines to be the same - Is this correct or is there another way of connecting?
how to connect a projector to a computer using a vga cable
View 1 Replies View Relatedhow to connect a projector to a computer using a vga cable
View 1 Replies View RelatedI have aspire 7745 laptop running windows 7 premium 64bit. I had the video & sound working on the TV via the HDMI cable but it stoped working. Now the TV "sees" the HDMI signal (and receives a low tone) & the computer "sees" the TV as a secondary display in the device manager. but no signal or sound. i have tried many ideas found here and other places on line but no change.
View 1 Replies View RelatedCan I plug-in (and -out) a SATA cable (to hard disc) from (ASUS) motherboard slot when computer is running?
Or will this cause a damage to hardware?
plugging my vga cable from my computer to tv but signal drops
View 2 Replies View RelatedI have an HP Pavilion Elite HPE machine, Windows 7, Radeon HD 5700 Series graphics card, connected to an Acer monitor and HDTV. Here's details on my setup:
My Equipment | Building a Home Theater With Your Office PC
My problem is that even though my HDMI cable's plugged into my Radeon graphics card, sometimes the PC only recognizes the Acer monitor and not the receiver (that's connected to the HDMI cable and my HDTV). So I end up having to plug and unplug the HDMI cable several times (sometimes 10+) before it recognizes the HDTV/receiver connection. Is there any setting that would favor the card/PC recognizing the HDMI cable more frequently? I've heard it's a handshake issue, and that maybe using a different type of cable would work. But wondering if there's a setting I could use before switching out cables.