Canon Pixma MP160

Apr 3, 2009

I just installed Windows 7 and my printer doesn't seem to work.. Its a Canon pixma MP160.. i guess i have to install the proper drivers.. could someone help me out with this?

View 2 Replies


ADVERTISEMENT

Canon LiDe 80 And Canon PIXMA IP4000 Problem

Nov 8, 2009

Upgraded desktop to 64-bit and discovered that my Canon LiDe80 and Canon PIXMA iP4000 drivers are incompatible. So after some research and not sure how accurate, I read that the professional version would allow more of the 32-bit drivers to work.

Is that correct?

View 4 Replies View Related

Canon Pixma IP4200

Nov 1, 2009

Canon Pixma IP4200, anyone have this driver for Windows 7 64 bit? i couldn't find it for the love of God. only found that utility stuff on their site.

Answer:-

http://software.canon-europe.com/software/0025265.asp

View 7 Replies View Related

Canon Pixma Software And Drivers

Aug 1, 2009

Can anyone pint me in the direction for the Canon software for a Canon Pixma IP5200. I want to be able to once again print onto DVDs but cannot. I have aprint driver installed that works, but the Easy print toolbox and CD label print software from Canon won't install.

View 3 Replies View Related

Canon Pixma Mp780 Drivers

Oct 26, 2009

I have a dell studio with windows 7 64bit, it recognizes my canon pixma mp780 on the wireless network but says to install drivers even though they are already installed.It say- File needed: Printer driver INF for Canon series MP780

View 0 Replies View Related

Driver Canon PIxma IP4000

Nov 29, 2009

looking for the appropriate driver for Windows 7. The add-on exe downloaded from Canon site doesn't fix anything !

View 3 Replies View Related

Can't Scan With Canon Pixma MX700

Jun 25, 2010

Back in the fall when I switched over to Windows 7 Home Premium x64 from Vista Home Premium SP2 x64, I installed the software for my Canon Pixma MX700 multifunctional printer. I used the original Vista driver installer disc, and despite an warning message about a "known compatibility issue" the printer and scanning functions worked fine. I use the Pixma on the LAN via a wired ethernet connection. Worked fine for occasional scanning in November, December, and January.Then for months I had no need to scan anything, just printing over the network with no problems.Last weekend I needed to scan something. I usually just push the scan button on the printer, verify the computer it's going to scan to (it lists them), and away it goes. This time my computer threw an error about the scanner driver saying the scanner wasn't on the network. Huh? If the scanner's not on the network how did the computer know it was trying to send a scan... So I bailed on that and instead used the MP Navigator EX software on the computer. It failed too, giving the "scanner not connected" error, either using Navigator's direct interface or telling it to open the scanner driver which brings up a slightly different interface (when it worked).First I went to the Canon site and d/l'ed all the latest drivers for 7 x64 and installed them. Still get the same errors. Tried setting it up to scan via USB temporary connection. If I install it that way it works, but it's not a long term solution. And it stops working after a reboot. The odd thing is the scanner works over the LAN after I set it up for USB (when using NAvigator, because the scan to lan button on the printer doesn't work of course), again until reboot.

View 8 Replies View Related

Canon Pixma MP210 - MP Navigator

Nov 19, 2009

Since installing W7 I have been unable to attach a photo to an email using

my MP Navigator/Canon Pixma MP210. Using Vista it was an automatic process. A pop-up box informs me that I have to re-adjust my mail ?

I am using Windows Live Mail Beta Version and previously I was using

Windows Mail. I cannot alter my mail user without help. What I really need are click by click instructions. Can anybody help, please ?

View 3 Replies View Related

Canon Pixma IP3000 Won't Install In Windows 7?

Nov 10, 2010

I just wanted to relate my vexing problem and the ultimate solution which I dscovered after half a day, and it's something that Microsoft will probably never admit happens.I installed Windows 7 64 bit OS on my Toshiba Satellite, and could not get my Pixma iP3000 installed. I first tried the disc that came with, but I got messages to the effect that this will not work with my current sysytem. I looked all over the world at Canon download sites and could fine everything BUT the Windows 7 64 bit driver.Everywhere else I got the same tip: Just plug in your printer fresh into a recently re-started computer, and the system should recognize it and install the driver. Well, it attempted to do this the first time, but it notified me that it did not have the driver!Following another tip, I prompted Windows update to have a go. Surprise, it discovered some new updates to install. Lo and Behold, one of them was a Pixma iP3000 driver update! but DAMN, that one update failed to install, and after failing a retry it just would NOT attempt it again. The message was something to the effect of, "We decided you don't need that."The solution: I started from scratch. I re-installed Windows 7 64 bit after deleting the partition. I ran the first run of Windows update. Before installing anything else, I turned on and connected my printer. Again, it said, "Yes, we see this is a Pixma iP3000, but we don't have the driver." Then, keeping the device connected, I did Windows Update again, and several updates, including the Pixma iP3000 driver update, appeared. It installed correctly this time.

View 1 Replies View Related

Canon Pixma Printer Status Monitor

Jan 13, 2009

I have Windows 7 (7000) installed. Everything working except Windows 7 did not recognize my Canon Pixma iP8500 printer. OK under Vista. I manually selected a driver for Canon Pixma Pro 9500 and then re-configured the printer as an 8500 via the "advanced" tab in printer properties. Printing seems to be OK, but the Canon status monitor application can't seem to talk to the printer over the USB interface. Any ideas?

View 6 Replies View Related

Cant Find Canon Pixma Ip3000 Drivers

Aug 20, 2012

My windows 7 64bit cant find Canon pixma ip3000 drivers!

View 5 Replies View Related

Canon PIXMA MX860 Wireless Driver

Sep 22, 2009

Is it yet known if Windows 7 RTM has the Canon PIXMA MX860 driver? My aunt bought a computer with a free upgrade to Windows 7 after October 22, and wanted to buy this printer but did not know the compatibility with Windows 7...

View 0 Replies View Related

Canon Pixma MP150 Printer Sharing

Jul 19, 2009

I have windows 7 build 7100..I have a Canon Pixma MP 150 printer. I want to share the printer with my new Macbook Pro with Mac OS X Leopard through my D-Link wireless router. I am totally new to the Mac and don't know my way around yet,but would still like any help anyone can give me.

View 4 Replies View Related

Canon Pixma IP3500 Not In Device Manager

Dec 28, 2011

Suddenly the Pixma IP3500 will not print text. If I open A WORD document and press print, the paper feeds through blank. If I print the test page, it just prints the logo in the upper left corner. If a page has diagram on it, it will print the diagrams but not the text on the page.

View 1 Replies View Related

Canon Pixma Mx870 6a80 Error

Jul 22, 2012

My mx870 is showing 6A80 Printer Error message. I turned power off and on like it suggested, but that did not fix the problem. It also said to check manual, if that doesn't work but there is nothing in manual about 6A80.

View 2 Replies View Related

Canon Pixma MG5450 - Printer Driver Would Not Install

Dec 7, 2012

I bought a MG5450 2 days ago and began setting it up yesterday however stumbled across an issue where the printer driver would not install regardless of the compatibility setting. Being as it's a newly released printer I thought the drivers would be up to date and new, however I think there may be a issue with NT 4.0 driver policy as when I try to install the drivers through the device manager, it gives me that message that there's a policy in place stopping me.

Windows update always fails when trying to install the printer, however the scanner, and software included all work fine. I can scan images on wirelessly and have them saved on my computer without an issue, however there is no way to print. I have tried disabling the policing through the 'MSC' and adding a local group policy or something along those lines. However none of this has worked. How can I get the driver to install or disable the policy to allow the printer to be installed. Tried installation of the drivers both through wireless and wired, both come to the same outcome.

Running Windows 7 Ultimate 64x

View 5 Replies View Related

Canon PIXMA IP4000 Windows 7 64bit Driver

Apr 17, 2011

Can't seem to find thios driver anywhere. All the links seem to be dead ends.

View 2 Replies View Related

Pixma Canon Ip4000 Printer Drivers For Windows 7?

Jun 20, 2011

Pixma canon ip4000 printer drivers for windows 7

View 1 Replies View Related

Windows 7 - Quicken 99 Cannot Activate Canon Pixma MP 600 Printer

Feb 28, 2010

I have Quicken 99, Windows 7, and a Canon Pixma MP 600 printer. Quicken cannot activate the printer to print Quicken reports. All I can do is print screens using Screen Saver which is very lacking in desired results.

View 7 Replies View Related

Empty The Memory Of Canon Printer Pixma 258 For Free Only?

Jan 13, 2013

I would like to ask how to empty the canon printer pixma 258? I already pushed the reset but then the error appeared as p 1 0 with error no

View 1 Replies View Related

Unable To Shutdown After Installing Canon Pixma MG5370 Apps And Driver?

Jan 2, 2013

My system is a windows 7 x64. it is connected via LAN cable to my wifi router (also used for internet). Prior to installing Canon Pixma MG5370 apps and driver, the windows works fine.My Canon printer is connected via WIFI to my router so in essence, I print through my router to the printer. No errors were encountered during the installation process.After all these, I noted that my windows will not shutdown anymore. After clicking shutdown, it will reach the screen where it shows "Shutting down" and a spinning disc like icon. and this is where it will remain and not power off at all.ard disk Led not blinking during this time. I had to do a HARD FORCE shutdown.

View 7 Replies View Related

Unable To Shutdown After Installing Canon Pixma MG5370 Apps And Driver?

Jan 2, 2013

My system is a windows 7 x64. it is connected via LAN cable to my wifi router (also used for internet).Prior to installing Canon Pixma MG5370 apps and driver, the windows works fine.My Canon printer is connected via WIFI to my router so in essence, I print through my router to the printer.No errors were encountered during the installation process..After all these,I noted that my windows will not shutdown anymore. After clicking shutdown, it will reach the screen where it shows "Shutting down" and a spinning disc like icon. and this is where it will remain and not power off at all.hard disk Led not blinking during this time.I had to do a HARD FORCE shutdown.

View 3 Replies View Related

Canon X64 Printer Drivers For Older Canon Printers

Dec 11, 2009

Vista x64 natively supported a bunch of canon printers with x64 drivers. For some printers this support has gone under Windows 7 x64. Perhaps this will help some people ... .

I mounted a Vista x64 ISO-image/source, extracted the folder with the canon printer drivers and installed the Colorpass Z40e driver under Windows 7 x64. In my case I used this driver für a Canon Colorpass Z400e (Canon CLC 1100).

Extraxct :

- use 7zip

- under options check "wim"

- open the install.wim an verify your vista version (important if there is a 64bit and 32 bit version on the same DVD, in my case there was only a 64bit on the systembuilder DVD)

- choose the right folder and extract the canon printer driver folder with 7zip

windowssystem32driverstorefilerepositoryprnca001.inf_c505b61f

that is it .

View 0 Replies View Related

Canon 2880 IRC

Dec 22, 2009

I just got a Sony Vaio VGN-Z51MRG/B its running Windows 7 Pro x64 so installed all the software I need including CCleaner, now I do a cmd such as "telnet 192.168.28.66 9100" it connects to my Canon iRC 2880i no problem I get the black in screen in cmd all good.

So now I do a CCleaner clean I did untick in oprions "Only delete files in Windows Temp folders older than 24 hours"

I did tick "ISS Log Files" and ticked all IE and FireFox cleaning options

Now I do a registry clean back up onto my desktop, restart PC try to telnet my printer it no longer connects this took me a second VAIO system restore to find out the problem is due to CCleaner cleaning I dont wont to do another system restore how can I fix this!...

Here is the printer specs below

http://www.canon-europe.com/For_Work/Products/Office_Print_Copy_Solutions/Office_Colour_Printers/iRC2880i/index.asp?specs=1

I tried registry restore straight away just after I couldn't tracert the device it didnt help, I then tried windows system restore just one step back that didnt do the trick either... Im guessing CCleaner has removed something important just as it did the first time before I done the Sony System Restore to out of the box 1st time state.

I have another PC running Windows 7 Ultimate x86 I do use CCleaner on it although it does not loose the same printer in the same network I can tracert it and ping the device no problem

Canon U.S.A: Support

http://www.canonusa.com/opd/controller?act=OPDSoftwareAct&fcategoryid=2269&modelid=14355

Windows 7 x64 support as stated above and WHQL certificates

here are all the drivers btw the second time I restored Windows I used the Canon C2880i built in drivers that come with Windows 7 I only need the Color Network Scan Gear Tool from the site so I use the scanner.

is how I feel after setting up the PC twice!

View 1 Replies View Related

Drivers For Canon F30

Nov 17, 2009

I am unable to install my canon f30 under Windows 7. Can anyone help?

View 3 Replies View Related

Canon EOS 20D Drivers

Dec 10, 2009

Anyone found a driver that works with a digital canon EOS 20D?

Answer:-

Have you tried the Vista drivers?

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=314&modelid=10464

Set the D20 camera communications setting on PTP instead of NORMAL.

View 1 Replies View Related

Compatibility Canon BJC 250

Aug 26, 2009

I was trying find information about compatibility drivers canon BJC 250 with windows 7 64 bits. I know that one printer is compatible with windows vista. Go to link:

http://www.microsoft.com/windows/compatibility/Details.aspx?type=Hardware&p=Canon%20Bubble-Jet%20BJC-250&v=Canon&uid=&pf=0&pi=0&s=canon%20250%20bjc&os=32-bit

i installed windows 7 build 7057 but i don't find drivers. ¿can you help me?

View 9 Replies View Related

Canon Navigator Won't Open?

Nov 12, 2009

I recently installed a Canon MX860 multi-function printer and it's software package, including the app that controls the scanning function. That app, Navigator EX 2.1, won't open. It returns an error message saying the program has encountered an error (unspecified) and will let me know when Windows determines what it is. An older version of the software for an older printer worked fine.On the advice of Canon, I installed the software under a different user account and it worked fine.I've cleaned the registry of all mentions of the older program and have also run Registry Booster to correct errors. I've uninstalled and reinstalled the printer and the software several times. Why would a program work under one user account and not another? Both were set up as administrators.

View 9 Replies View Related

Copying From My Canon Mg6150

Mar 7, 2012

I cannot got my 6150 to copy from the rear tray, I have tried all of the printer settings.

View 1 Replies View Related

Canon LBP5000 64-bit Drivers

May 20, 2009

Anyone knows what Canon is gonna do about the fact they don't have 64-bit drivers for this printer? Anyone some information on this?

I know there are no Vista (64-bit) drivers either. This is the only piece of hardware which is not functional with Windows 7 RC (64-bit).

This is a great printer, so I will stick to XP if no solution is given by Canon. But maybe someone has some official info from Canon regarding this issue .

View 7 Replies View Related

Canon S9000 Printer

Jul 24, 2009

Has anyone gotten the 64 bit version of Windows 7 to work with the Canon S9000 printer? There is a add-on driver for 64 bit, but it needs the "regular" driver to be loaded first and I cannot seem to get it to install - it dies at 60% every time.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved