Canon Pixma IP4200, anyone have this driver for Windows 7 64 bit? i couldn't find it for the love of God. only found that utility stuff on their site.
Answer:-
http://software.canon-europe.com/software/0025265.asp
I have a Cannon ip 4200 printer. Just upgraded to W-7 64 bit Home. Computer won't recognize it.
View 6 Replies View RelatedUpgraded desktop to 64-bit and discovered that my Canon LiDe80 and Canon PIXMA iP4000 drivers are incompatible. So after some research and not sure how accurate, I read that the professional version would allow more of the 32-bit drivers to work.
Is that correct?
I just installed Windows 7 and my printer doesn't seem to work.. Its a Canon pixma MP160.. i guess i have to install the proper drivers.. could someone help me out with this?
View 2 Replies View RelatedCan anyone pint me in the direction for the Canon software for a Canon Pixma IP5200. I want to be able to once again print onto DVDs but cannot. I have aprint driver installed that works, but the Easy print toolbox and CD label print software from Canon won't install.
View 3 Replies View RelatedI have a dell studio with windows 7 64bit, it recognizes my canon pixma mp780 on the wireless network but says to install drivers even though they are already installed.It say- File needed: Printer driver INF for Canon series MP780
View 0 Replies View Relatedlooking for the appropriate driver for Windows 7. The add-on exe downloaded from Canon site doesn't fix anything !
View 3 Replies View RelatedBack in the fall when I switched over to Windows 7 Home Premium x64 from Vista Home Premium SP2 x64, I installed the software for my Canon Pixma MX700 multifunctional printer. I used the original Vista driver installer disc, and despite an warning message about a "known compatibility issue" the printer and scanning functions worked fine. I use the Pixma on the LAN via a wired ethernet connection. Worked fine for occasional scanning in November, December, and January.Then for months I had no need to scan anything, just printing over the network with no problems.Last weekend I needed to scan something. I usually just push the scan button on the printer, verify the computer it's going to scan to (it lists them), and away it goes. This time my computer threw an error about the scanner driver saying the scanner wasn't on the network. Huh? If the scanner's not on the network how did the computer know it was trying to send a scan... So I bailed on that and instead used the MP Navigator EX software on the computer. It failed too, giving the "scanner not connected" error, either using Navigator's direct interface or telling it to open the scanner driver which brings up a slightly different interface (when it worked).First I went to the Canon site and d/l'ed all the latest drivers for 7 x64 and installed them. Still get the same errors. Tried setting it up to scan via USB temporary connection. If I install it that way it works, but it's not a long term solution. And it stops working after a reboot. The odd thing is the scanner works over the LAN after I set it up for USB (when using NAvigator, because the scan to lan button on the printer doesn't work of course), again until reboot.
View 8 Replies View RelatedSince installing W7 I have been unable to attach a photo to an email using
my MP Navigator/Canon Pixma MP210. Using Vista it was an automatic process. A pop-up box informs me that I have to re-adjust my mail ?
I am using Windows Live Mail Beta Version and previously I was using
Windows Mail. I cannot alter my mail user without help. What I really need are click by click instructions. Can anybody help, please ?
I just wanted to relate my vexing problem and the ultimate solution which I dscovered after half a day, and it's something that Microsoft will probably never admit happens.I installed Windows 7 64 bit OS on my Toshiba Satellite, and could not get my Pixma iP3000 installed. I first tried the disc that came with, but I got messages to the effect that this will not work with my current sysytem. I looked all over the world at Canon download sites and could fine everything BUT the Windows 7 64 bit driver.Everywhere else I got the same tip: Just plug in your printer fresh into a recently re-started computer, and the system should recognize it and install the driver. Well, it attempted to do this the first time, but it notified me that it did not have the driver!Following another tip, I prompted Windows update to have a go. Surprise, it discovered some new updates to install. Lo and Behold, one of them was a Pixma iP3000 driver update! but DAMN, that one update failed to install, and after failing a retry it just would NOT attempt it again. The message was something to the effect of, "We decided you don't need that."The solution: I started from scratch. I re-installed Windows 7 64 bit after deleting the partition. I ran the first run of Windows update. Before installing anything else, I turned on and connected my printer. Again, it said, "Yes, we see this is a Pixma iP3000, but we don't have the driver." Then, keeping the device connected, I did Windows Update again, and several updates, including the Pixma iP3000 driver update, appeared. It installed correctly this time.
I have Windows 7 (7000) installed. Everything working except Windows 7 did not recognize my Canon Pixma iP8500 printer. OK under Vista. I manually selected a driver for Canon Pixma Pro 9500 and then re-configured the printer as an 8500 via the "advanced" tab in printer properties. Printing seems to be OK, but the Canon status monitor application can't seem to talk to the printer over the USB interface. Any ideas?
View 6 Replies View RelatedMy windows 7 64bit cant find Canon pixma ip3000 drivers!
View 5 Replies View RelatedIs it yet known if Windows 7 RTM has the Canon PIXMA MX860 driver? My aunt bought a computer with a free upgrade to Windows 7 after October 22, and wanted to buy this printer but did not know the compatibility with Windows 7...
View 0 Replies View RelatedI have windows 7 build 7100..I have a Canon Pixma MP 150 printer. I want to share the printer with my new Macbook Pro with Mac OS X Leopard through my D-Link wireless router. I am totally new to the Mac and don't know my way around yet,but would still like any help anyone can give me.
View 4 Replies View RelatedSuddenly the Pixma IP3500 will not print text. If I open A WORD document and press print, the paper feeds through blank. If I print the test page, it just prints the logo in the upper left corner. If a page has diagram on it, it will print the diagrams but not the text on the page.
View 1 Replies View RelatedMy mx870 is showing 6A80 Printer Error message. I turned power off and on like it suggested, but that did not fix the problem. It also said to check manual, if that doesn't work but there is nothing in manual about 6A80.
View 2 Replies View RelatedI bought a MG5450 2 days ago and began setting it up yesterday however stumbled across an issue where the printer driver would not install regardless of the compatibility setting. Being as it's a newly released printer I thought the drivers would be up to date and new, however I think there may be a issue with NT 4.0 driver policy as when I try to install the drivers through the device manager, it gives me that message that there's a policy in place stopping me.
Windows update always fails when trying to install the printer, however the scanner, and software included all work fine. I can scan images on wirelessly and have them saved on my computer without an issue, however there is no way to print. I have tried disabling the policing through the 'MSC' and adding a local group policy or something along those lines. However none of this has worked. How can I get the driver to install or disable the policy to allow the printer to be installed. Tried installation of the drivers both through wireless and wired, both come to the same outcome.
Running Windows 7 Ultimate 64x
Can't seem to find thios driver anywhere. All the links seem to be dead ends.
View 2 Replies View RelatedPixma canon ip4000 printer drivers for windows 7
View 1 Replies View RelatedI have Quicken 99, Windows 7, and a Canon Pixma MP 600 printer. Quicken cannot activate the printer to print Quicken reports. All I can do is print screens using Screen Saver which is very lacking in desired results.
View 7 Replies View RelatedI would like to ask how to empty the canon printer pixma 258? I already pushed the reset but then the error appeared as p 1 0 with error no
View 1 Replies View RelatedMy system is a windows 7 x64. it is connected via LAN cable to my wifi router (also used for internet). Prior to installing Canon Pixma MG5370 apps and driver, the windows works fine.My Canon printer is connected via WIFI to my router so in essence, I print through my router to the printer. No errors were encountered during the installation process.After all these, I noted that my windows will not shutdown anymore. After clicking shutdown, it will reach the screen where it shows "Shutting down" and a spinning disc like icon. and this is where it will remain and not power off at all.ard disk Led not blinking during this time. I had to do a HARD FORCE shutdown.
View 7 Replies View RelatedMy system is a windows 7 x64. it is connected via LAN cable to my wifi router (also used for internet).Prior to installing Canon Pixma MG5370 apps and driver, the windows works fine.My Canon printer is connected via WIFI to my router so in essence, I print through my router to the printer.No errors were encountered during the installation process..After all these,I noted that my windows will not shutdown anymore. After clicking shutdown, it will reach the screen where it shows "Shutting down" and a spinning disc like icon. and this is where it will remain and not power off at all.hard disk Led not blinking during this time.I had to do a HARD FORCE shutdown.
View 3 Replies View RelatedVista x64 natively supported a bunch of canon printers with x64 drivers. For some printers this support has gone under Windows 7 x64. Perhaps this will help some people ... .
I mounted a Vista x64 ISO-image/source, extracted the folder with the canon printer drivers and installed the Colorpass Z40e driver under Windows 7 x64. In my case I used this driver für a Canon Colorpass Z400e (Canon CLC 1100).
Extraxct :
- use 7zip
- under options check "wim"
- open the install.wim an verify your vista version (important if there is a 64bit and 32 bit version on the same DVD, in my case there was only a 64bit on the systembuilder DVD)
- choose the right folder and extract the canon printer driver folder with 7zip
windowssystem32driverstorefilerepositoryprnca001.inf_c505b61f
that is it .
I just got a Sony Vaio VGN-Z51MRG/B its running Windows 7 Pro x64 so installed all the software I need including CCleaner, now I do a cmd such as "telnet 192.168.28.66 9100" it connects to my Canon iRC 2880i no problem I get the black in screen in cmd all good.
So now I do a CCleaner clean I did untick in oprions "Only delete files in Windows Temp folders older than 24 hours"
I did tick "ISS Log Files" and ticked all IE and FireFox cleaning options
Now I do a registry clean back up onto my desktop, restart PC try to telnet my printer it no longer connects this took me a second VAIO system restore to find out the problem is due to CCleaner cleaning I dont wont to do another system restore how can I fix this!...
Here is the printer specs below
http://www.canon-europe.com/For_Work/Products/Office_Print_Copy_Solutions/Office_Colour_Printers/iRC2880i/index.asp?specs=1
I tried registry restore straight away just after I couldn't tracert the device it didnt help, I then tried windows system restore just one step back that didnt do the trick either... Im guessing CCleaner has removed something important just as it did the first time before I done the Sony System Restore to out of the box 1st time state.
I have another PC running Windows 7 Ultimate x86 I do use CCleaner on it although it does not loose the same printer in the same network I can tracert it and ping the device no problem
Canon U.S.A: Support
http://www.canonusa.com/opd/controller?act=OPDSoftwareAct&fcategoryid=2269&modelid=14355
Windows 7 x64 support as stated above and WHQL certificates
here are all the drivers btw the second time I restored Windows I used the Canon C2880i built in drivers that come with Windows 7 I only need the Color Network Scan Gear Tool from the site so I use the scanner.
is how I feel after setting up the PC twice!
I am unable to install my canon f30 under Windows 7. Can anyone help?
View 3 Replies View RelatedAnyone found a driver that works with a digital canon EOS 20D?
Answer:-
Have you tried the Vista drivers?
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=314&modelid=10464
Set the D20 camera communications setting on PTP instead of NORMAL.
I was trying find information about compatibility drivers canon BJC 250 with windows 7 64 bits. I know that one printer is compatible with windows vista. Go to link:
http://www.microsoft.com/windows/compatibility/Details.aspx?type=Hardware&p=Canon%20Bubble-Jet%20BJC-250&v=Canon&uid=&pf=0&pi=0&s=canon%20250%20bjc&os=32-bit
i installed windows 7 build 7057 but i don't find drivers. ¿can you help me?
I recently installed a Canon MX860 multi-function printer and it's software package, including the app that controls the scanning function. That app, Navigator EX 2.1, won't open. It returns an error message saying the program has encountered an error (unspecified) and will let me know when Windows determines what it is. An older version of the software for an older printer worked fine.On the advice of Canon, I installed the software under a different user account and it worked fine.I've cleaned the registry of all mentions of the older program and have also run Registry Booster to correct errors. I've uninstalled and reinstalled the printer and the software several times. Why would a program work under one user account and not another? Both were set up as administrators.
View 9 Replies View RelatedI cannot got my 6150 to copy from the rear tray, I have tried all of the printer settings.
View 1 Replies View RelatedAnyone knows what Canon is gonna do about the fact they don't have 64-bit drivers for this printer? Anyone some information on this?
I know there are no Vista (64-bit) drivers either. This is the only piece of hardware which is not functional with Windows 7 RC (64-bit).
This is a great printer, so I will stick to XP if no solution is given by Canon. But maybe someone has some official info from Canon regarding this issue .