Cannot Load XP On A Windows 7 Machine
Jul 12, 2010
I'm trying to load windows XP to enable a dual boot on an e-machines PC with Windows 7 home premium already installed. I've followed the instructions in a previous tutorial on the subject, but here's what happens.I installed a second HD on the PC successfully. The pc reads the HD and has assigned it a drive letter. I also purchased a Windows XP Home OEM license CD.When I try to boot from the XP CD, it starts loading drivers and other files, and then I get a blue screen saying installation halted due to possible damage to the computer.
View 1 Replies
ADVERTISEMENT
Jul 19, 2011
my emachine e525 wont load windows. its stuck on the 1st page where it says hit f2 to enter setup, if i press f2 it just says please wait, and i did i waited and waited and waited
View 1 Replies
View Related
Jan 4, 2012
i have Lan, all computers are windows 7 proffisional and one machine is windows 2003 , workgroup . i made shared folder in windows2003 , some computers can access the shared folder and others can not.when i open network , i see the 2003 computer, when i try to access it , it asked for user name and password. the user is administrator for all , when i enter the user and password from many computers in the lan it is work correctly but in one machine with the same settings its says , you have no permession to access this computer.
View 3 Replies
View Related
Sep 22, 2010
I have de-commissioned an older machine that I had installed W7 on, I wish to install the W7 from this machine to another, is this possible -if so how?I think I have read somewhere, that once W7 is installed on a machine - it can NEVER be used on any other machine, is this correct?
View 1 Replies
View Related
Feb 20, 2012
I replaced an XP machine with a Win7 machine. When I VPN into our 10 network I can't get to any 192.168 addresses. The XP machine works fine only the Win7 doesn't. I looked at a lot of settings but I can't find anything out of sorts.
View 3 Replies
View Related
Feb 6, 2011
ive got 2 computers hooked up to a router by Ethernet sharing an internet connection, the internet connection works fine for both computers. i would like to share documents also between the computers
-one is a windows xp 32
-one is a windows 7 64
ive set up many networks in the past with a bunch of xp machines without any trouble but now i am having trouble my first step was on the windows 7 machine, i went to control panel -> network and sharing center -> setup a connection or network -> set up a new network this is where i believe i am making a mistake of some kind, it seems that the windows 7 machine is assuming that i want to set up the network wirelessly, when it is connected to the router via Ethernet. it simply brings me to a screen that says choose the wireless router or access point you want to configure, and hangs there with a greyed out next button everything seems to be going fine on the xp machine, i created a new network called "share bear", told it that the computer connects through a residential gateway, enabled file and printer sharing, rebooted the machine, and confirmed that there was a new folder in the network places for shared documents..i went back to the windows 7 machine where it was still hanging, rebooted it, looked for the new network in network and sharing center and it wasn't there, i tried again to "set up a new network" on the windows 7 machine with the same hanging screen
View 4 Replies
View Related
Jan 23, 2012
I have a small network of six computers. Five of them run XP and I just added a Windows 7 machine. I've got a Microsoft Access 2003 database that all of the computers share that is hosted on one of the XP machines. The Windows 7 machine can access the Access database through the network just fine, as long as no one else is accessing it. However, if someone else on an XP machine on the network is using the file, it won't open on the Windows 7 machine. Doubling clicking the file on Windows 7 gives me the circling blue icon for a second or two, then nothing happens. If the XP user exits the database, then I can open it fine. Permissions on the XP that is hosting the database is set to allow everyone. And all the XP machines can access it at the same time.
View 9 Replies
View Related
Jul 31, 2009
I have Windows Seven 7600 and i'm trying to share files with a XP SP2 machine!
Problems:
-XP machine can see Seven machine but can't access shared folders!
-Seven machine can see XP machine but when i'm trying to see shared folders it gives me an error(see on screenshot)
-Network map doesn't work(see screenshot)
-Both machines have same workgroup MSHOME but when i go to homegroup it says there is no people in the homegroup!(see on screenshots)
Other info:
Before i couldn't turn network discovery on,every time i was set it to on he was going to off so I searched on this forum(great forum) and finally i was able to turn it on,maybe others have this problem so there what i did:i go to start=>run=>services.msc and i turned on(also i switched them to automatic startup) these services DNS Client, Function Discovery Resource Publication, SSDP Discovery, and UPnP Device Host services.
IPv6 currently is enabled!
View 9 Replies
View Related
Aug 7, 2012
well i'm try to copy files from my xp machine to my win 7 machine i can see the xp machine but i get a message that says "make sure that the xp machine allow incoming connections for file sharing" and i have done just that i think but its a no go i've just about everything.
View 1 Replies
View Related
Dec 17, 2012
Installing W7 using an old HDD on an old machine to install W7 on a new SSD to be used on a new machine.I'm currently using this old machine from '09 and its performance levels have died down a lot. I bought all the components to build a new machine except I didn't want to spend extra money on another HDD to install the OS on my new 180GB Intel SSD. So basically, I want to use the HDD from my old computer, install W7 onto the SSD, then transfer the drive to my new computer, and use it on the machine and just reinstall all my other files.
View 5 Replies
View Related
Jun 25, 2012
I dont know if this is posted in the right area but I'm so desperate to get my laptop working its unreal. First it started off with my laptop crashing, I had totally forgot it needed to do a windows update and turned off my laptop in hopes that it would work properly. After that my laptop has not been working. The machine turns on and gives me two options. Start windows normally or do a repair. Upon starting windows normally, it loads so far before sending me back to the two options of start windows normally or repair. On the second time I clicked repair. My laptop then goes so far before presenting me with a blue screen that is usually the screen where my accounts are. The cursor still moves but it loads no further even after leaving it an hour. I decided to make a repair disk, hoping that the problem was because of windows. the disk loads, gives me a choice on the keyboard language then does nothing. I honestly have no idea what to do, I want to keep all the files safe on my computer as I havent backed them up and I have worked so hard on the projects.
View 1 Replies
View Related
Feb 6, 2011
ive got 2 computers hooked up to a router by Ethernet sharing an internet connection, the internet connection works fine for both computers. i would like to share documents also between the computers
-one is a windows xp 32
-one is a windows 7 64
ive set up many networks in the past with a bunch of xp machines without any trouble but now i am having trouble my first step was on the windows 7 machine, i went to control panel -> network and sharing center -> setup a connection or network -> set up a new network this is where i believe i am making a mistake of some kind, it seems that the windows 7 machine is assuming that i want to set up the network wirelessly, when it is connected to the router via Ethernet. it simply brings me to a screen that says choose the wireless router or access point you want to configure, and hangs there with a greyed out next button everything seems to be going fine on the xp machine, i created a new network called "sharebear", told it that the computer connects through a residential gateway, enabled file and printer sharing, rebooted the machine, and confirmed that there was a new folder in the network places for shared documents.i went back to the windows 7 machine where it was still hanging, rebooted it, looked for the new network in network and sharing center and it wasn't there, i tried again to "set up a new network" on the windows 7 machine with the same hanging screen.
View 3 Replies
View Related
Apr 7, 2012
Im having a couple problems with my computer, firstly when i boot up The icon for the LAN onnection has a red cross to say its not connected even though it is and it will recognise that it is after approx. 5 minutes and will only say network instead of the actual name if my connection (network99) secondly when i log on from booting up the desktop take a while to load and all the icon thumbnails load slowly one at a time and its really slow.
View 1 Replies
View Related
Aug 18, 2009
I have a small three PC home network. Two PC are running Windows 7 and one running Vista.
All three machines have the same homegroup settings. The ability to view machines on the network is very patchy. One machine can see the others, while another machine can only see one other machine. Sometimes machines cannot see any others on the network.
All machines are connected wirelessly with strong signals through a BT 2700HGV Business Hub router. All of the machines can access the Internet without problems.
All machines run Eset Smart Security with the Windows firewall is turned off.
Any advice to create a stable network would be appreciated.
View 9 Replies
View Related
Sep 23, 2012
I connect to a remote machine C from Machine B which is connected from Machine A, How can I send ctrl+alt+end to remote machine C ? I cannot access m/c C from m/c A, I need to go through B to access C.
m/c A --> Remote destktop to m/c B --> remote desktop con m/c C.
View 2 Replies
View Related
Feb 5, 2012
I am using MS Virtual PC v6.1.7600.16393.I had created a virtual machine on my system, which has been deleted now, but I have .vhd file created for that virtual machine.Now I am trying to create a new virtual machine by using the previous .vhd file.Unfortunately, when I start this newly created virtual machine, it asks to Insert Boot Media in selected Boot Device.I want to retrive few of my data stored in previously created virtual machine.
View 1 Replies
View Related
Nov 27, 2012
My LAN consists of a gateway/router and 4 PCs A, B, C and D. A thru C are Windows 7/64; D is XP32/SP3.
Until a few days ago, everyone saw and could access everyone. Then C stopped seeing D. C can ping D, but it cant see it (in Network or in the network map).
C can still see itself and also A and B.
A, B and D can still see everyone.
Ive tried all the usual fixes from this and other forums: verified that all have same Workgroup name (no Homegroup); checked the IPs and other adapter settings; checked sharing settings; disabled Cs firewall; rebooted everything and everybody. Also tried to use the LLTD hotfix, but Windows reported that my XP-SP3 install already has it.
View 5 Replies
View Related
Jun 6, 2011
Have had a string of problems pop up over the course of the week. First thing that happened was that I had an error window pop up stating that there was a hiccup with a hard drive (don't have the details of error). Desktop rebooted and system started up fine but then noticed that most desktop icons were missing and program listings were missing from STARTUP.Friday night got a malware for WIN 7 Antivirus Software.I used Spybot to clean the system. Back to normal now but Sat morning while looking at video on MSN screen went black and system rebooted. Next came grey window stating that system files could not be found to start up.
Tried restoring last good setting but still not bootable. Noticed in windows error report that Win 7 was on (F:). Got into DOS mode and discovered my drive C: is now drive F: all other HDs are correct. Current C: is blank no file or directories.
View 1 Replies
View Related
Feb 15, 2012
Can I get hyperterminal on a windows 7 machine?
View 1 Replies
View Related
Jul 12, 2010
I purchased a computer that has windows 7 home premium installed. I also have a critical app that can only run on XP and the manuf. tells me that the app runs into problems when running on Windows 7's XP emulation. I installed a second HD in the PC, and it recognized and gave it a drive letter. Formatted it to make sure it was clean. (It was previously installed in a Dell with XP.also bought an XP SP3 OEM license CD, and followed the instructions in the tutorial on the subject. When trying to boot off the XP CD, I got a Blue Screen indicating that the installation was halted, damage to the machine, blah blah.
View 8 Replies
View Related
Aug 15, 2011
I will install a Windows to be used in my MacBook Air. I found a Windows 7 OEM at Amazon but I am not sure whether I can use it for installation with Boot Camp or with Parallels. Should I buy a full (and more expensive) version of Windows 7 instead?
View 4 Replies
View Related
Feb 2, 2012
my windows 7 machine is not going to bios
View 3 Replies
View Related
May 17, 2012
Can I format a machine with XP with Windows 7 OS?
View 2 Replies
View Related
Jun 20, 2012
I did the same as this fellow. I have a fresh HD, mad a partition on it, booted from the 64bit CD. It let me go through the entire process when it came time for the ssystem to reboot I received and error message "cant run the 64 bit windows 7 on a 32 bit system". I can not get passed it each time I boot I get the same thing
View 3 Replies
View Related
Nov 22, 2012
I have a wireless laptop. Had windows7 installed when I got it, well it crashed and I cant get it to load up to windows so I can at least try to fix it
View 1 Replies
View Related
Nov 25, 2012
I have programs on an old XP PC and would like to transfer the content of that drive to a second (new and faster) drive that is available on a new Win 7 Professional PC. These programs are costly to reinstall and would rather just use the old HD with the programs on it. Is this doable?
View 4 Replies
View Related
Jan 12, 2013
Recently my computer is always at 100% even when no apps are running. But as soon as i run Task manager load reduces. This doesnt happen in safe mode. Im sure that this is a virus. When i scan my computer with Avira Antivirus (Free) it doesnt detect anything
View 16 Replies
View Related
Jan 21, 2012
My old computer died, Sony Vaio Running Windows XP. I had been using a 100GB sata eternal drive for backup.
Bought new computer, Gateway DX4860/6gigs ram running Windows 7 Home Premium, plugged external hard drive in and nothing happened. New machine does not recognize the external hard drive.
View 4 Replies
View Related
Dec 14, 2012
When I RDP to the machine, it will connect to my login screen. But when I type in my userID and password, it will come up with a certificate error message. It will ask whether i want to connect anyway. When I click yes, it will return to the IP address box and will not login.
View 1 Replies
View Related
Oct 17, 2011
When I purchased my emachine last year it came with Vista. At the time of purchase they were offering a free upgrade to Win7. I received the upgrade disk a while back in the mail.I would rather use the win 7 upgrade on an HP machine that also has Vista. The disk I was sent 'seems' to be tied to only emachines.Is it possible to use this disk to upgrade my HP computer instead of my emachine computer?
View 2 Replies
View Related
Mar 4, 2012
Can I install mac os lion on windows 7 machine. What are the system requirement for mac os lion. I have intel dual core (2.5ghz) processor, 2 gb ram, 320 hard disk. And if I fulfill the requirement of mac os lion then how do I install it.
View 1 Replies
View Related
