My Wacom Intuos tablet needs a new driver but after removing the old one my Windows 7 Pro 64bit registry still has this old driver mentioned in many lines of all the CurrentControlSet, ControlSet001 and ControlSet002.I am the Administrator and in CurrentControlSet have changed the Administrator permissions to Full and the owner to Administrator for all of the following[CODE]I have read all that I could find about changing inherited and non inherited permissions and ownership but I'm no further forward.
I have a fresh install of Windows 7 Pro 32 bit and all my software is installed and working well except for one. Following a problem with the initial install attempt, I'm trying to re-install LotusSuite 9.8.2 but the previous attempt seems to have resulted in some "Lotus" registry entries that now direct things to a non-existent "F" drive. When I try to re-install from the CD, it doesn't allow me the option of choosing the destination location. Instead, it automatically tries to install in this non-existent drive. I've opened RegEdit and searched and found many references to Lotus and to F:Lotus.
How can I edit the registry to get rid of the F:Lotus entries or change them to C: ? Or just get rid of all references to Lotus? BTW, this software works perfectly on my Win 7 laptop.
My CD/DVD-Rom drive is unresponsive (it opens and closes normally) and does not show up on Device Manager.I read a guide that suggested that I have corrupted registry entries. It told me to delete UpperFilters and LowerFilters.I deleted the two entries (and possibly others in the same location).
Good news: I backed up my registry Bad news: I backed up my ENTIRE registry (oops)
So far, everything appears to be the same... Except when I open iTunes I get an notice that says the registry settings needed to burn and import CDs are missing.I've been told that I can import the entire .reg backup and "hope that all goes well". It sounds rather sketchy and I am seeking better help.I've also been told that a wire could have come loose but I want to fix this registry problem before opening up my PC. I hope it doesn't come off as leaching by coming here solely for making a help thread.
I recently installed a crap copy of Adobe CS5 that I was told was good, and would like to install a new one but have been told that I might want to delete any traces of the old copy before proceeding, this includes deleting any entries that have been made in the registry.
I would like to set the default folder view to be set to details, and control panel view set to small icons. I would like this set for the default user profile. What the relevant registry entries are ?
I've unistalled Amd Driver from Device Manager, Unistalled Catalyst software and ran Driver Sweeper. There is only 3 registeries that the Driver Sweeper CAN'T delete and these are under SYSTEM folder. I've tried to change user privilegies but this far I've not succeeded.
I imported my RSS/Feed list in IE8. I have over 200 entries in my Common Feed List and I want to start over with just a select few. So first I want to delete all entries. My question is this. Is there a way to delete everything in the common feed list at once?
Let me see if I can explain this. Since installing a registry editor called "Context Menu Take Ownership" a couple of days ago, I have had problems saving files to my desktop and accessing files located on my When I choose to save a file .. save as>desktop, It takes a full two minutes for my desktop to load in my "save as" dialog box. I can't change to say "documents" until the desktop has fully loaded into the "save as" dialog box.I then downloaded the remove "Take Ownership" reg editor at the same website above. Ran it and sure enough, there is no more option to "take ownership" of a file/directory when I right click.
However, I still have the same problem saving to or accessing a file located on the desktop, from a program (any program, on my computer, or on a website such as a "upload images") using the "save as" or trying to access the desktop to retrieve a file.This makes me think there are some registry entries that need to be deleted. I don't know what though.I should also point out, I did a system restore and system restore could not complete because of a registry issue.Couple screen pics attached.One showing a blank "save as" dialog box with desktop selected. The other is the desktop fully loaded after about 2 minutes.I originally installed take ownership because I could not get "read only" changed on a directory. It didn't even fix that. Rebooting did though.
Is it necessary for my OS?I was gonna proceed with deleting it because I had a hunch it was the reason my Explorer.exe keeps crashing every time I move the taskbar.I thought I should check here first just in case I make matters worse/Should I go ahead in delete it? I don't have any K-lites codecs but maybe this is a leftover from the uninstall?
In order to get rid of the *.zip folder view in WinExplorer on a64bit Windows 7 system I tried to delete (according to some tutorials) the Registry key:
Unfortunately this is not possible immediately. When I try to delete it then I got a popup: "Cannot delete.... Error while deleting key." Ok, so I tried to get ownership of this key by right clicking-->Permissions then selecting "Users" and enabling "Full control" the "apply" button but I got here: "Unable to save permission changes on .... Access denied".
This last error comes for all Owners: SYSTEM, Administrators, trusted Installers. I have Admin rights. So what more do I need to get ownership? Every change in owner is rejected as well.
I have Windows 7 Ultimate, and every time i want to delete a key in HKLM/SYSTEM, i get "Cannot delete (key name): Error while deleting key" Here's what i've tried: setting Permissions on the key to full control for administrators group, owner, owner rights, SYSTEM, and my own admin account, NONE of that helps. Also, in 'Advanced security settings-->Owner, i changed it to my own admin account, and also ticked "replace owner on subcontainers and objects" but i get another error "Registry Editor could not set owner on the key currently selected, or some its subkeys." I even turned off User Account Control (UAC).
I just installed a new HD but I ran into a little problem. When I tried to install a patch for COD I did it wrong. I uninstalled the program and re-installed it then tried to set up the patch again. The problem is when I do that its still finding remenents of the first time I tried to install the patch so its aborting the install because its saying the 1.5 patch is still there even though it should not be. How can I get rid of all rements of a pervious installed software? Last time I thought someone told me to use the windows registry key but I can't remember how to do that.
I Don't Need Use Your Uninstaller or Revo Uninstall But I Need Use CClearner. How to Use It For Delete Registry After Remove Some Programs In Add/Remove In Control Panal or Unuse Items ?
One More Question.. About System Locale .. I Seletct English (US) @ Windows Install Screen. But Now I Need Change It << I Can do It ? Is No Bad Result After Change Because Is Not Original Locale Install [English (US)] ?
The other day, I tried to edit my registry editor(regedit) because I wanted to enable something. When I do anything with my regedit, it comes up with a error messsage.
when i open regedit , i suddenly delete the wrong registry i want to delete , and appear this message "Unable to Delete all specific values." is that mean that registry not deleted right? is that mean that registry is safe? not intentionally want delete that registry ... and afraid if that registry been deleted ..
While windows was uploading some updates yesterday, I cleaned my registry using Iolo's system mechanic tool and that's where the problems started. (I already read and understood your message: don't use those tools and stay out of your registry. A lesson I learned too late, unfortunately.)My computer rebooted and after a couple of minutes I noticed the message: " failure configuring windows features reverting changes ". I managed to bypass this loop by running in safe mode and recover my computer to a restore point in the past. This only worked partially: I get windows to run in normal mode but I get this message: "system failed while restoring the registry from the restore point. Restore point damaged or was deleted during restore". So it didn't restore but I can get into my windows now.So I don't get the 'reverting change loop' anymore, so I can access my computer but what's the mess? Well my computer is slow as hell.Like mentioned above, I already looked around on this forum and wrote down what I already tried. [code] My computer is terrible slow because of a registry defrag/optimization of a registry tool (in combination with windows update) --> I need to find a way to get back my old registry files but system recovery ain't working.
I have installed revo uninstaller which I have used with no probs till now. I decided to use autorun to see start up programmes instead of using the usual msconfig. This is the process I followed.Revo uninstallerautorunI unticked all boxes except my security programmes as this is a new laptop and all programmes were set to run at start up.Closed down laptopestarted laptopOpened startup (the idea was to start up a few at a time to see which I really needed)only 3 boxes were there (security which I left ticked)I have reset to default in startupstill only 3 boxes were showing still tickedI have since had an update from itunes and this is now showing as a 4th programme in startupother than these 4 boxes the list of startup programmes have not shown themselves.
When I right-click on certain things (in this case, all types of files), some of the entries in the right-click menu are shorter than the others, and stick out of place. One of them is my Bluetooth "Send to Bluetooth Device" entry, which looks to be about 4 pixels shorter, and really does stick out like a sore thumb.
I'm tweaking Flight Simulator 2004, and I have an add-on program that has thoroughly uninstalled, but it's entry still remains on the remove/change program page. How can I get rid of it for good?
How do I remove toolbar menu entries from the taskbar menu? I am talking about the menu you get when you right click on the taskbar. I have two entries under TOOLBARS that I would like to remove. I don't mean uncheck the box to turn it off I mean remove it from the list of toolbars. I added a toolbar and now I wnat to remove it.
I installed a program called Folder Size which I am mostly happy with: Folder Size - Freeware. Check the directory sizes and folder sizes on your computer with this freeware tree size analysis tool.However, it added an entry to my right click context menu everywhere which is bothering me. I can find no option in the software to remove it.
I got a problem with double entries which I found out while selecting a new background. I want to learn how I can remove double entries in picture location list.
Also an error message appears when I select either
In addition to double entries on picture background list, I have one more problem with undeletable files in recycle bin. I don't know where they come from but I get a warning message whenever I want to clear them
I have a Brother HL-2270W Wireless All-In-On laser printer which also does duplex printing. I'd like to be able to have two entries in my Devices and Printers list that point to this same printer. One would be setup to default to Duplex printing. This would make it a lot simpler than having to select this each time I print something. Setting it for Duplex as the default causes every page, even if it only is a single page, to go through the duplex process which slows down non-duplex printing a lot.
Boot is very slow (> 4 minutes) so trying 'autorun.exe' to check out 'entries' that may be causing slowdown.(msconfig has been used to reduce grossly unwanted items from starting.)
Under the Scheduled Tasks tab there are many 'entries' that have no Description or Publisher and in the Image Path field has 'File not found'.
Running Powerterm terminal emulator to telnet to Linux server. Under Windows 7, after 17 control-z.control-c/control-] entries, Powerterm crashes. This does not happen under Windows XP. Always after 17 entries but not necessarily consecutive.
So my computer randomly freezes up and when I boot up there are no log entries of the event. There are however always 3 log entries but I don't believe they are related to the actual problem. The 3 that are always there are: 6008, 7026 and 41. Now when I say it freezes I mean it literally freezes up. I do not get any blue screen or black screen or any errors it literally freezes as if I took a screenshot of my desktop and was looking at it. I can not use my mouse or keyboard I can not hear anyone in a skype call or anything it is FROZEN. The only way I am able to reboot it is by holding the power button which thus gives me the error code 41 above.
I have Windows 7 OEM version. Recently my friend installed Ubuntu to work on it. After some time I removed Ubuntu through Add Remove programs but whenever I start my computer at the time of booting, it asks me to choose out of 3 entries :-- Windows 7, Ubuntu, Ubuntu.
Now, I wish to remove these 2 Ubuntu entries and I understand I have to remove some multi disk partition entries for Ubuntu, in bootmgr.dll... right??
How can I remove these two Ubuntu entries??
PS: This is for the moderators--I hope this doesn't come under "black-listed issues". According to my understanding, a simple meddling with bootmgr.dll such as the above doesn't qualify to come under "hacking"..or any other black list issues...
I am trying to delete anything regarding my recent medical history from my desktop so I can give it to someone without having to do a fresh install. I do a universal search from Windows Start and looking for the name of my doctor "Smith". I deleted all documents, but the search results are still showing up-when I click to open folder to delete it the folder is no longer in existence. I am not sure what else to do in order to permanently erase any semblance of these files from that function.
There are endless queries on the Internet about how to set the default email client to something other than Outlook or Windows Live. Got me to thinking there must be some app or instruction on how to manually place an entry in the Windows 7 Set Default Programs utility, since software developers can do it for apps like Skype, WinRar, PotPlayer, etc. If anybody has run across such a tool, let the community here know
