My previous OS is Windows Vista Starter w/c is very much annoying IMHO, so I installed another OS which is Windows 7 Ultimate 64 bit Edition in a partition and this is the one I'm using at the moment. But the problem is the sleep function..Every time I put my Laptop to sleep and when I'm waking it up to resume the task I'm doing it restarts my system instead which is pretty much annoying..
View 2 Replies
I installed 7RC a couple of months ago. Since then whenever my pc sleeps I can not wake it up. It used to wake up fine in XP. To get it going again I have to cold reboot or pull the plug. When it comes back up everything I was doing is still there, I just have to enter my password. I think I have all the settings right but if someone could run me through everything that needs to be set I'd be really grateful.
View 9 Replies View RelatedI am not savvy in this kind of stuff. My husband has a home built computer that runs our tv system with windows media center. He had to leave on a military deployment and right before he left he had to reinstall the OS. Since then the computer refuses to wake from sleep mode. I have to scram it to get it to come back up. Since we run the media center it ought to wake up to record automatically, but it isn't doing that either. I've checked all the power options but that doesn't seem to be the problem. Although, at this point, I really have no clue.
View 8 Replies View RelatedI built this computer in March of this year and everything worked great. I had my power options set up so I could switch between high performance and power saver for when I'm not using it. Power saver was set up to turn off display and put the computer to sleep after 1 minute. I don't recall changing any of the advanced settings but maybe I forgot something.
I used to wake it up simply by hitting the space bar and everything would come back on. I just did a clean install of Windows 7 two days ago and since then when I choose power saver and it goes to sleep after whatever time I set it to, it no longer wakes up. Well, this is where I'm lost because it still makes the same noises like the fans spinning harder and all that but nothing appears on my monitor. At first I thought it had something to do with my monitor but I just realized that the lights on my mouse don't come on either. Which they used to before when I'd hit the space bar.
My build:
Windows 7 Home Premium
Processor: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
(RAM) 8.00GB
System type: 64- bit
Should I tweak anything? I just tried "powercfg -energy" today and it shows about 15 warnings in my Energy Report. The reason I did this is because my computer does not wake up from sleep mode sometimes.
View 3 Replies View RelatedI have my computer set to sleep after 30 mins of idle so that it won't stay on all night. But lately when I wake it in the morning, I have noticed the cpu temperature steadily rises over 2-5 mins until it gets so hot the computer shuts itself off without even performing a crash dump first. I started using Coretemp to monitor it to discover this when the shutdowns started, and WhoCrashed to try to figure out the crashes (but since its not creating a report that doesn't work). I normally run below 40 for idle and below 50 at load, but after waking from sleep it starts in the 30's and just keeps climbing without the fan ever becoming more audible or seeming to react. Its not a false reading either - you can SMELL it getting hot, thats why I got Coretemp involved in trying to figure it out.
It is now doing this every single time it sleeps, whereas before it was more random. After it shuts off (or I shut it off to protect it), and cools off for a few mins, I turn it back on and can hear the cpu fan kick on in high gear for a while then gradually slow down - interestingly it it does not kick in like that during the overheating after wake. So... what would cause the cpu fan to fail to compensate for overheating ONLY after waking from sleep mode?!
I have a Dell Studio XPS435 MT running Windows 7. For the past six months I noticed that when waking the computer from sleep mode, occasionally the monitor would not wake up and I would have to reboot. It got worse and worse until now it will never wake up without rebooting. I also noticed when I reboot, if I don't wait a few seconds for the computer noises to stop and immediately press the power button; the computer starts beeping loudly and nothing works. I have to manually shut it down and wait about 30-40 seconds to reboot.
View 1 Replies View Relatedsometimes not all the time after my pc has been in sleep mode, the monitors dont come back on, i can see the pc wakes up but the monitors stay black and so far the only way ive got it to work is to power off and reboot.
all my drivers are upto date what could be causing this i dont realy want to disable the sleep mode?
It does this every once in a while. It happened twice in the past 2 days. I'm not sure if it's something I left open before going into sleep mode or something else.So the computer's been in sleep mode, usually for at least an hour. I do the usual thing to wake it up, move the mouse. After a simple movement fails, I try again, moving vigorously and clicking all the mouse buttons. I have also tried pressing all the keys on my keyboard.
View 3 Replies View RelatedMy computer monitor won't wake up from sleep mode. The power light flashed blue like it is asleep but when I hit the keyboard or click the mouse nothing happens. I even restarted the computer and tested to see if the wires were bed or loose and that didn't help either. I switched out the monitor and the new one works on the computer so it seems it is something with the monitor.
View 2 Replies View RelatedThis is now my third time with this problem, the first required me to restore to factory settings. These last two seem to have been triggered by a power flicker at my residence. The power momentarily flickered long enough for my computer to shut down. After booting the computer seems fine until approx 5-10 min later it will enter sleep mode no matter what I am actively doing on the pc. I fixed the second time with a restoration to two days before the incident. This time I restored to that same point and it still has the problem. Power settings are on high performance with sleep and hibernate set to never.
View 6 Replies View Relatedi have to press the power button every time instead. all the laptop i've owned before were never like that, opening the lid would've sufficed. i checked power options settings, i don't see "lid open action", only "lid close action" which is set to "sleep" mode.
View 10 Replies View Relatedpressed sleep button on keyboard by mistake and now im getting nothing apart from normal sound from tower i/e fans running etc,i am unable to do anything seeings how my keyboard mouse and monitor are all non responsive,,,,does anyone no away around this please,my computer a custom build mother boards an ASUS P8Z68-V LX if thats ofi read a post where i may have to reset the cmos on motherboard by pressing a reset button which i have not been able to locate yet or removing the battery from motherboard for 5 secs as you can see i havent got a clue when comes to computers so dont want to start reset or removing battery as i dont no if thats the only option i have seeings how im getting nothing and am unable to enter bios
View 2 Replies View RelatedI've been having a problem with Windows 7 recently on my new computer that I just got a couple weeks ago. The problem is that my computer will have a blue screen error when waking from sleep mode. I don't see the blue screen at all, instead, when waking from sleep mode, I see the BIOS screen and then it goes through the typical startup process as if the computer had been powered OFF instead of put into sleep mode (however, I know it was properly in sleep mode, as the power light on my tower flashes continually rather than shutting off during this mode). I get the message that Windows did not shut down properly and have the option to boot into safe mode, etc. When I boot back into normal mode I receive a message in Windows saying windows has recovered from an unexpected shut down. [code] However, when I tried to install the hotfix, I was given the message "This update does not apply to your system", which I have read may be an indicator that the update has already been installed? I have run Chkdsk on drive C successfully, and I have installed every available windows update as of today (Apr 14, 2012)
View 14 Replies View RelatedI installed external speakers on windows 7, now when I wake up computer from sleep mode I get one loud pop, I never heard it before I installed speakers.
View 12 Replies View RelatedMy brand new Logitech G510 keyboard won't wake my PC up from sleep mode. My mouse (Razor DeathAdder) will wake up PC from sleep mode. When it does wake from sleep mode I hear the beeps like new hardware has been found and then I can use my keyboard. I've checked for the latest firmware and software from Logitech's website, but it's a fiasco looking for updated drivers and firmware on their site.
View 9 Replies View RelatedMobo Intel DP55WB. Computer cant enter into standby. In event Viewer I found System: e1kexpress - Intel 8257DC Gigabit Network Connection- Network is disconnected and 3 seconds later Intel 8257DC Gigabit Network Connection - Network link has been established at 1Gbps full duplex following in 2 seconds The PCP/IP NetBIOS Helper service enetered the running state following in 2 seconds Power troubleshooter -> The system has resumed from sleep . sleep time approximately 10 seconds The mobo's BIOS doesn't have Wake on Lan on/off option.
Does Windows has any overriding power settings?
Usually, the power management sleep mode shuts down the system, including the power switch indicator, which must be depressed to wake the machine back up and resume Windows. So long as the power indicator remains lit, it takes only a touch of the pad to start up again.
Lately, however, the system goes to sleep (as do I), but the power indicator stays lit. When I return, the system is completely unresponsive. I have to hold the power switch, shut down abnormally, then reboot the system from scratch.
I had my laptop for about 5 months running OEM Win 7 home premium 32bit. The system came with no disks so I am stuck, for now, with the copy loaded. Anyway, things had been running smoothly up to a few weeks ago, for when I tried to put my system into hibernate, like I've done many times before, the screen went black, but the system did not power-down. I could not do anything but power-cycle it. When it came back I got the "Windows failed to shutdown properly blah blah blah" message. I tried 'sleep' and the same thing happened. I don't do much in the way of adding or removing programs on this laptop, aside from updates and the only recent hardware change was using a usb mouse. Which I have tried removing this and there was no change. I have tried updating drivers that needed it (video, audio, and network) as well as the BIOS. No luck.
View 1 Replies View RelatedI'm running Win 7 Pro 64 bit on a system using an ASUS P5Q Pro motherboard.henever I'm away from the computer for an extended time, I always go to Start and put it in sleep mode. I've never had a problem with it waking back up and resuming until today. I had to leave the house for a while, so placed it in Sleep mode, but then realized I'd forgotten to do something, so before it actually went into sleep mode and shut down, I started moving the mouse to stop it. Nothing happened and I eventually heard the usual pop of the speakers indicating it had shut down into sleep mode. The monitor was blank. I kept moving the mouse, but instead of waking up and going back into Windows, I heard the same beep as heard when rebooting, and the Cmos stuff appeared on the screen as if booting, but then stopped and I saw "Press F2 to load defaults and continue" ....which I did. It started to do something then stopped with no HD activity and nothing on the screen. Nothing.
No activity. I then shut it down using the button on the front of the case and let it sit for a couple minutes. Pressed the On button and heard some activity with the green light and red activity light lighting. Sounded like a normal boot with the beep, speakers popped on, and it looked like something was going to appear on the screen, but....nothing. I could see the monitor had been activated....just nothing displayed. All activity stopped within a few seconds with only the green light still on. The internal fans were running, but nothing happening. Again, I shut it down using the power button, and shut the power supply off as well. I let let it sit and tried again.....same thing. It starts to do something, then quits with just the green light on and the internal fans running. It simply will not boot...and until this episode has been running great.
It seems to have something to do with pressing F2 and loading the bios defaults. I'm wondering if it may be locked in sleep mode. I contacted the guy who builds my systems and is unfortunately out of town and I'm in the middle of a magazine layout. We tried everything, but it simply won't go past that one point. It's not even POSTing. He suggested removing the motherboard battery in order to reset the bios and if it happens to be locked in sleep mode, removing and replacing the battery will delete any sleep mode settings.After reading about similar issues, I removed the motherboard battery and changed the jumper for 10 seconds to reset the bios and finally was able to get into the bios setup.
I get intermittent freezing on waking from sleep mode, and indeed occasionally it wakes up immediately after sleeping.
I looked in the event manager and after 2 separate occasions of it freezing on waking up, it's come up with vwififilt as the culprit. I hope I've uploaded a screengrab correctly.
I can't find anything online which distinguishes why this file is not loading and causing a freeze on waking from sleep mode.
Any ideas on what I can do to remedy this problem? And also why I might be getting this sporadic problem of the system waking immediately after sleeping?
My Windows 7 laptop reboots when I put it in sleep mode or when it falls asleep automatically?
View 1 Replies View RelatedIt's my first time posting! I've been browsing this forum and many sites on google trying to find the solution to my problem, but I can't really understand what is going on, even when taking a look at the dump file. I ran memtest, did all the usual things, but no sign of source of error to pin point. Every single time I put my laptop to sleep and keep it like that for longer amount of time (I think it's about 20 minutes) I can't get my laptop back from sleep in a normal fashion. What I mean is, that the screen never turns back off, stays completely black, my external monitor doesn't turn on either, just goes to idle mode. After reboot I get a message that there was a blue screen error and I can try to look for solution online. I read that my SSD HDD might be the cause of it, but after updating the firmware the problem persisted and after looking at my memory dumps, I found out that DirectX kernel is causing the problems, but updating it didn't yield any results, the problem persists, so perhaps I am missing something in the dumps that aren't that obvious to spot.My RAM aren't stock that came with computer, both chips 4GB each are aftermarket ones, but I have no issues with anything when using the computer except when it is waking up and MEMTEST didn't throw me any errors after an overnight pass.
View 1 Replies View RelatedI want to say 2 days ago, my computer has decided to fail when going to sleep. It is Windows 7, completely updated with no problems to that point. When it falls asleep and I wake it up, the machine starts up and is active, but my monitors and external hard drive are never turned on as they once were and the machine just sits there running with a black screen. I restart, boot back into Windows and it says resume (as if it was in hibernation, but I have hybrid sleep on) and I just get a flashing underscore and no more. I restart once again, it says Windows could not restore the session, I start a new session and all is good again... until the computer falls asleep and the process starts over.
I have tried turning off hybrid sleep. No good. I have tried using hibernation instead of sleep. Same error. I found online where someone said they had this problem with an ATI card, but once the upgraded the Catalyst Control Center and drivers, they had no problems. That did no good. The only update I've done recenly is Firefox, but I have not seen any other reports of the newest Firefox causing sleep problems. I read where someone had a problem with waking up from sleep mode because of Firefox's memory leaks and they said closing Firefox before putting it to sleep helped.It does not matter if I put it to sleep and wake it up immediately or if it goes to sleep and when I get home from work, boot it up. The same thing happens no matter the length of time.I have a dual boot with Ubuntu, but that has been on there for months with no errors and Ubuntu will sleep and wake up just fine. There have been no hardware changes or any hardware driver changes other than the video card. I tried rolling back video card drivers to see if there was a difference with no change. My ASRock MB has the most up to date BIOS that has been out for over a year. My video card is a 5770, but like I said, I've tried older and new drivers. I tried the prevx black screen fix with no luck.
CPU = Intel i7-860
MOBO = Gigabyte ga-p55a-ud4p
RAM = G.Skill 4x4gb 1333mhz
PSU = Corsair TX 650 watts
GPU = Nvidia GTX 480
HDD 1 = W.Digital 7200 rpm (1 TB)
HDD 2 = *NEW* SSD Samsung 840 (256 GB)
The new SSD is my boot drive with a legit Windows 7 Ultimate 64 bit. I have the repair discs also if necessary.Problem = Many, but not all, of my wakes from sleep result in a blue screen of death. (I have no other BSODs)Also, this never happened using my old HDD.Two recent BSODs with different error codes = [URL]I have installed the MOBO CD drivers and the latest NVIDIA GPU drivers and latest SSD firmware (before OS install).Are there any other drivers I might have missed?SFC /SCANNOW detects no integrity violations.CHKDSK on both the SSD and HDD detects no problems.Windows Memory Diagnostic detects no problems.
Just built my new computer, and everything, including sleep, worked perfectly. I then installed GRA4 off Steam, and now when the computer wakes up it does NOT blue screen-rather the monitor inverts color, pixelates heavily, and then freezes. I cannot, or the life of me,
[Code]...
My problem usually comes when I put my computer to sleep, and then wake it up. Instead of just jumping right to the desktop screen, it now goes back to the motherboard screen and does a resuming windows operation that takes 5x as long as it used to.
Sometimes this problem causes the computer to simply restart and get a BSOD, when I am in the process of resuming windows.
EDIT: I believe I have actually gotten 2 separate BlueScreen reports during this... d1 1033, and 1e 1033.
Windows 7 x64
i5 3570k
HD 6950
1tb HD
8gb RAM
750W PSU
I have a bsod problem at wake-up from sleep on windows 7 x64 ultimate.
View 2 Replies View RelatedHi new user here, my RTM copy used to go to standby and wake up fine but recently when I try to power it up the machine will appear to start up, but my screen, keyboard and mouse do not wake up, also my wifi light does not turn on either.
The only way to get on to my pc is to do a hard restart.
I believe this might help:
Power Efficiency Diagnostics Report
Computer Name KYLE-PC Scan Time 2009-08-06T10:10:33Z Scan Duration 60 seconds System Manufacturer DIXONSXP System Product Name DIXONSXP BIOS Date 04/12/2007 BIOS Version 1.00.DIX OS Build 7600 Platform Role PlatformRoleMobile Plugged In true Process Count 61 Thread Count 793 Report GUID {15f6f462-9d4b-4faa-a8b5-f49855e75b24} Analysis Results
Errors
Power Policy:Sleep timeout is disabled (Plugged In)
The computer is not configured to automatically sleep after a period of inactivity.
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name RT73 USB Wireless LAN Card Host Controller ID PCIVEN_8086&DEV_27CC Host Controller Location PCI bus 0, device 29, function 7 Device ID USBVID_148F&PID_2573 Port Path 3
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Root Hub Host Controller ID PCIVEN_8086&DEV_27CC Host Controller Location PCI bus 0, device 29, function 7 Device ID USBVID_8086&PID_27CC Port Path
CPU Utilization:Processor utilization is high
The average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization.
Average Utilization (%) 14.90
Battery:Last Full Charge (%) The battery stored less than 40% of the Designed Capacity the last time the battery was fully charged.
Battery ID DIXONSXP DIXONSXP Design Capacity 2000 Last Full Charge 797 Last Full Charge (%) 39
The report points to my wifi card being the source of the problem yet I have tried disabling it and the same occurs.
I know there has to be a simple fix to this but I'm banging my head against the wall right now trying to figure this out. Everytime my PC goes to sleep I'll press a button on my keyboard or move my mouse and it will wake up just fine, but the monitor won't wake up. I've also noticed that the backlight on my keyboard doesn't show up. I've tried different monitors and removed the VGA cable from the graphics card after waking up and plugged it back in and no video. I have to reboot the computer to get video again and everything works great.. until it goes into sleep mode again. I have updated my graphics card driver (Geforce GT 210) and still no fix. I haven't made any changes that would cause this. Someone has to know something about this
View 5 Replies View RelatedRecently, my computer will not wake up from sleep mode. Once it enters sleep mode, the only way to get it functioning again is to hold the power button, completely shut it off, and then boot my system back up. It appears as if everything starts back up once I open the lid or press the power button to wake it up, but the screen never turns back on. The fan starts up, the backlit keyboard lights up, the leds all blink, but nothing I try will turn the screen back on forcing me to press and hold the power button for a complete shut down.I have reinstalled the latest Intel HD Graphics driver as well as the latest NVIDIA graphics driver (both the stable and beta release).I do not get a blue screen or any sort of error. Upon the restart, I am not prompted with any error from windows or any signs of the forced shut down.
View 1 Replies View Related
