I'm using Win 7 ultimate 32 bit. I've a problem when configure DNS. I enter Local Area Connection Properties then click on Internet Protocol Version 4 but it show a window and disappear.
View 9 RepliesI'm having trouble with my very new computer (Lenovo Y480 with Windows 7 Home Premium 64 bit), which I've narrowed down to the following sequence:
1. I restored computer to original factory settings (to rule out possible causes)
2. I ran msconfig, and checked the boxes 'Safe Mode' and 'Networking.' I got the following error message:"System configuration cannot save the original boot configuration for later restoration. Boot changes will be reverted. The system cannot find the file specified"
3. The default boot option disappeared from the boot menu (Windows 7, default OS, current OS).
4. When I restarted my computer, it would not boot and gave me the error 0xc00034, stating that the file BootBCD was missing.
I did not do anything else with my computer after restoring the factory settings, and I did not connect to the internet. I originally encountered the problem when I wanted to try installing Windows updates in safe mode after some of the installations failed. I have replicated the error several times, including after successfully installing all Windows updates.
Can I upgrade from Windows ultimate 32bit ver 6.1 ( build 7600) to windows 7 ultimate 64bit edition and keep all of my installed programs and files ?[meaning not having them moved to a new folder called windows.old]
View 3 Replies View RelatedI bought the full retail Win 7 Ultimate and trying to upgrade Windows Vista Ultimate to Win 7 Ultimate, both 32bit. I get to the Expanding Windows files to 21% and nothing. The program is still running and stuck at 21% but after waiting 3 hours I shut power off and Vista was reinstated. Why can't I get past 21% Expanding Windows files? I want to use the upgrade because I have a ton of programs on my Vista and don't want to spend days reinstalling them.
View 9 Replies View Relatedhow can i change my 32 bit win7 ultimate free dos to 64 bit win7 ultimate?can i do it without charge? where can i get it done?? can i get the iso/disk in downloadable format?
View 6 Replies View RelatedF2 configuration for window7?
View 1 Replies View Relatedi want to install win7 64 bit, but um confused about my PC configuration i hav
intel Core i 3 3.06Ghz
Gigabite H55 mobo
2 gb Samsung ddr 3 ram
500 gb Samsung sata hdd
and liteon 24x dvd writer.
i have a hp pavilion all in one and my cd drive is not reading any of the discs that i put in. when i check the system it tells me thst the drive is running properly. what should i do?
View 3 Replies View RelatedI put the XP disk in to have a look at the partitions before deleting them, but found the partition screen was confusing. My query is as follows:
2)There are 2 HDDs in the PC. When I got the PC, it had one Seagate HDD - W7 appeared in Windows on the C: drive and I placed applications there. Immediately afterwards I added a 2nd Hitachi HDD to hold data only, creating a single volume on it called G: data drive. This all seemed to be working fine until this current problem.
3) So, I thought I would see a C: �system� partition, or maybe a 100MB �system reserve� C: and another lettered part of that partition, and the G: partition/volume for data files (on the second HDD). However, what I saw on the partition screen via the XP installation disk was this:
476938 MB Disk 0 at Id 0 on bus 0 on atapi [MBR] D: Partition1 (System Rese) [NTFS] 100 MB ( 75 MB free)
E: Partition2 [NTFS] 476838 MB ( 419213 MB free) 476938 MB Disk 0 at Id 0 on bus 0 on atapi [MBR] C: Partition1 (data drive) [NTFS] 476937 MB ( 383546 MB free)
4) In the CMOS Features screen in the BIOS setup, the HDDs were configured like this (extract):
IDE Channel 0 Master [None]
IDE Channel 0 Slave [None]
IDE Channel 1 Master [Hitachi HDP725050GLA]
IDE Channel 1 Slave [None]
IDE Channel 2 Master [None]
IDE Channel 3 Master [None]
IDE Channel 4 Master [ST3500413AS]
IDE Channel 4 Slave [None]
IDE Channel 5 Master [Optiarc DVD RW AD-72]
The Hitachi HDD at channel 1 is the 2nd HDD, added by me after delivery to hold data files only, so I expected to see it below the Seagate HDD on this list.
5) Also, the Hitachi HDD was top of the Hard Disk Priority list on the BIOS Advanced screen. Again I would have expected to see the Seagate above the Hitachi in that list.
In XP, if one is playing something over the network on a wireless connection, there are usually (always?) little dropouts every so often caused by Wireless Zero Configuration service. So once its connected, simply disabling the service causes those dropouts to go away and playback is smooth and steady.Well, in Windows 7 I have those same dropouts over wireless but, no Wireless Zero Configuration service to disable. So what is the equivalent or what needs to be done to make it quite checking the connection so that playback will be as smooth as it is with XP?I've tried disabling a couple of sevices that were associated to wireless (WLAN Autoconfig) but so far I've only managed to completely bonk the connection.
View 4 Replies View RelatedI am having an issue with my windows configuration as usual when a Windows update comes along I click shut down and it updates and then once I power back on I get to the Welcome screen and it configures the new updates. Well right now I am having trouble because I run the update and then once I turn it back on the configuration stays at 0% and I have to power down and enter in Safe Mode so it reverts back to it's former updates. I don't want to have to go through this endless cycle forever is there anyway I can find out what these updates are? It is 4 of them and if I can find out what they are is there a way I can manually install each one individually to avoid this configuration freeze?
View 9 Replies View RelatedI have some problem with my windows 7. In some time, before the windows showed a screen with username and password while it was logging in, a message about configuring windows appeared and failed in doing the configuration. I always solve this problem by restarting and entering the safe mode and so i can do restore windows to a previous point where it was working properly. It is however too bad to do that always. Every several days i have this. How should I solve this permanently?
View 3 Replies View RelatedI have Win 7 Ultimate. I recently bought a usb turbotenna to catch wifi. It worked fine with the Ralink software. Ralink worked in conjunction with wzc as I set it up that way while installing the software. After a few days, I had what I thought was trouble so I uninstalled the Ralink software. I then plugged in the usb adapter and let windows load it's own drivers. Few days after that, I reinstalled the Ralink software and opted to "Use wzc as configuration utility" instead of using Ralink's. Ever since then, while I can still see and log on to networks using windows, the Ralink utility now shows NO networks. It now shows, "NIC or driver not ready". After several uninstall/reinstall, Windows will not relinquish it's primary control. I want to go back to Ralink showing networks and letting me connect through it's site survey.
Would uninstalling the Broadcom wireless connection be the solution? How do I get it to once again be secondary?
I was wondering if there are anything like the Wireless Zero configuration on windows 7. The thing that scans for wireless networks constantly.
View 4 Replies View RelatedI wanted to know whether Windows 7 Support the "ATA" option of the SATA Mode Configuration of BIOS
View 4 Replies View Relatedi have 3 HDD
1. 80 GB of ssd drive (~55GB used) - drive C - oparation system windows 7 installed
2. 1000GB storage drive (649GB used) -Drive D
3. 1000GB backup drive (930GB free space)- Drive E
i wanted to use windows 7 bakup to to create disk image of drive C and save it to drive E/i got a massage that tels me that i dont have enough free space to make the backup, after i checked i found up that windows 7 backup although i checked only drive C also backing up the files from drive D.how do i make windows 7 to backup only drive C and not the files and folders of drive D?
1) Long story short. I can't get Windows 7 to start because of a PFN_LIST_CORRUPT blue screen error, tried Safe Mode, Last Known Good Config, Memory Diagnostics Tool, same error. Nor can I get the W7 disk to repair or install.
It loads files but fails on the first Windows splash screen and goes to a MEMORY_MANAGEMENT blue screen. So I've decided to delete existing partitions using an XP Home installation disc , quit the XP install, and then try again with a totally clean install of
Windows 7.
I put the XP disk in to have a look at the partitions before deleting them, but the partition screen was confusing (not that it's hard to confuse me). My query is as follows:
2)There are 2 HDDs in the PC. When I got the PC, it had one Seagate HDD, Windows 7 appeared in Windows on the C: drive and I placed applications there. Immediately afterwards I added a 2nd Hitachi HDD to hold data only, creating a single volume on it called G: data drive. This all seemed to be working fine until this current problem.
3) So, I thought I would see a C: 'system' partition, or maybe a 100MB 'system reserve' C: and another lettered part of that partition, and the G: partition/volume for data files (on the second HDD). However, what I saw on the partition screen via the XP installation disk was this:
The Hitachi HDD at channel 1 is the 2nd HDD, added by me after delivery to hold data files only, so I expected to see it below the Seagate HDD on this list.
5) Also, the Hitachi HDD was top of the Hard Disk Priority list on the BIOS Advanced screen. Again I would have expected to see the Seagate above the Hitachi in that list.
Question 1 - could someone explain what I'm looking at in the partition screen?
Question 2 - are the HDDs wrongly configured? Maybe I did something wrong putting the 2nd HDD in.
PC details: - I don't know which details are relevant but motherboard is Gigabyte P67A-UD7, CPU is Intel 2600k, 8GB of RAM. Windows 7 Home Premium SP1 (OEM). The affected PC hasn't at any time been connected to the internet.
I have a Dell N5100 that come with DOS and would like to Load windows 7 on it. Could it be possible to have a factory configuration on it. Actually, i want to resell it and want it to come out as if its factory loaded.
View 12 Replies View Relatedtest page failed to print
View 1 Replies View RelatedI want to deploy Windows 7 via GPO by computer configuration. I've looked at instructions from the net but none of them worked!
View 4 Replies View RelatedI have windows 7, I am trying to configure the WIFI, I have wifi connection which having WEP with shared key authentication, that option I not found in windows 7. I have manually create a new profile and choose shared security option and WEP and I enter the my security key but I was not able to connect with wifi.
View 2 Replies View Relatedwell now ive got this really weird problem that only seems to be affecting windows 7 on my computer...i duel boot between both xp and 7; 7 is what i use most of the time and only really keep xp as back up and the fact that im to lazy to move partitions and files around. but to the problem...when i start up windows 7 as its booting up as far as i can tell it just keeps sucking up my physical memory...once i do get into an account(administrator which has nothing on it) and open task manager(which takes a long time to start up log on and bring it up) i see that my physical memory usage just keeps going up and up untill it evetually uses to much and i cant use my mounse.....then itll keep going untill its completly locked up and i have to use the power button to shut it down...this has been going on for bout a week now...ive tried taken off all hardware(exept video card which is because i have no on board) and tried windows start up repair(which does nothing) and i cant use my disc right now because it wont let me boot into it(gives me i/o error i think my cd drive is dieing....only bout 6 years old now heh) this problem only happens with windows 7 on xp i have no problem i boot up and can leave it going.also sorry for any spelling mistakes but im tired right now and left my glasses in the other room.
View 2 Replies View RelatedWhen installing Windows 7 about a year ago, I plumped for partitioning off my hard drive to keep Windows XP and installing Windows 7 on separate partition.Recently I added an SSD and have installed Windows 7 on that and now I want to remove the XP partition, reallocate the available space to my Sata Windows 7 install to begin the (long) process of making the SSD the primary and only OS on the machine.I've copy boot.mgr and the boot folder to my SataWin7 drive and then restarted the computer with the DVD in, selecting repair so I can run command prompt.Running Diskpart, I deleted the XP partition but for some reason I'm getting an error when I try and make my sata Windows 7 partition the active partition. I've subsequently rebooted and repaired the machine to restore the Win XP partition so I can carry on booting the machine (hence I'm typing now), but can anyone throw light on to what the problem is here?
View 9 Replies View RelatedI have a windows 7 x64. I separated 40 gb my disk and installed windows 2008 R2.But my boot info did not change. How can i add my new OS in my bcdedit? (I need exact commands)
View 2 Replies View RelatedI am currently on windows 7 with a ati radeon hd 3600 graphics/audio card. When I plug it in to my home theatre through HDMI there is only a 2.0 sound configuration, there is no 5.1. My home theatre is a sony ht-sf470. It is 3 months old and it is capable of dts-hd 5.1. How can I configure the HDMI to 5.1.
View 9 Replies View RelatedIt was doing this once before, but this time there is no BSOD. My system is biostar TH55b hd mobo, Asus ATI 5450 HD Graphics, 4 gigs ram, and several hundred gigs oh hd space. The description of the issue is that my pc freezes daily without any specific messages. Wish I could give you a better desription. This is a fresh reinstall of the os. Also there isn't any bluescreen hence there's no dump file, atleast that I know of.
View 8 Replies View RelatedI have a palm 515 palm pilot and it will not hot sync with windows 7.
View 4 Replies View RelatedI need to access Computer Configuration in order to navigate to User Rights. Does anyone know how to access Computer Configuration?
View 6 Replies View RelatedI just installed Windows 7 and like it for the most part. However, every morning it reconfigures itself, taking up to 10 minutes to boot
View 2 Replies View Relatedsend me how to install window 7 in cmos setup
View 1 Replies View RelatedI would like to know on how to put a wallpaper on my laptop acer background and do I start or what to do?
View 1 Replies View Related