I used ATI Catalyst Media Center in 2007 & could record scheduled TV programs. I recently tried it again with Windows 7. I am now able to record live TV programs & burn playable DVDs but I can't record scheduled TV programs. I do get an icon saying that the color scheme has reverted to Windows Basic but it looks the same to me.
View 1 RepliesI'm looking for a method to backup my scheduled recording/settings for media center before performing a clean install of windows 7.
I don't mind manually copying the files and replacing them, but I don't know their locations.
I recently changed my cable plan to basic (channels 1-18) and since then, I haven't been able to see any of the shows that I have set to record. They have not saved. I did a search on any new files and even noticed one of my shows recording one night, so I know it is not the cable company.There's plenty of room on the hard drive and when I manually record and stop recording, it actually DOES save and place it in the recorded TV folder.It must have something to do with the automated recording feature and even though it seems a coincidence that this started when I changed my cable plan... well, I just don't know. I also did a rescan of the cable network and channels.
View 2 Replies View Relatedwindows 7 pre 64 bit media center we record most programme fine but then sometimes it record then in small part and losse some of the programme
I have tried to man recored as well as setting recoreding from guide
I have a solution for the "no tv tuner" in ati catalyst media center, Windows 7 if
View 1 Replies View Relatedi am using windows 7 ultimate x86. if i tried to open any installed programs then it opens windows media center only. please resolve this issue as soon as early.
View 1 Replies View RelatedWithin the last couple days, Media Center/Recorded TV has started displaying a message "WMC could not find any shared libraries on your network or there is no content in those libraries."The directory it uses to record is "C:UsersPublicRecorded TV" and I can see prior recordings and new recordings in this directory. If I go into "Tasks" and select this directory as a library it shows as already selected and tells me no changes will be made to my libraries list on selecting "finish".I can click on one of the recorded program files in file manager and it will launch WMC and play just fine - the recorded programs just don't show up in the WMC/Recorded TV where they should.
View 4 Replies View RelatedI installed CCC recently. When I restarted my computer it started becoming unresponsive and locked up alot.
View 9 Replies View RelatedSo I wanted to install newest version of catalyst control center and it would install it but nothing would change. I formatted my laptop and still it wont install the newest version of ccc. I downloaded a driver from toshibas site it would install that but it seems like an old version (2010.0315.1050.17562).
This are my computers specs: windows 7, 6 gig dd3 ram, Intel core-i5-430m 2.260 MHz, ATI Mobility Radeon HD 5650
I get an error message when I first startmy computer saying, your Catalyst Monitor Control Center has stoppedworking. I don�t know what this is. Sois this something I should fix, or justforget about it? If it should be fixed
View 1 Replies View RelatedMy Graphic Card AMD Redeon HD 4600 Series & 11.8 Driver. Any recommended For CCC Setting ?
View 4 Replies View RelatedIve been trying to install this program on my computer because when i plug my laptop by HDMI cable to my Samsung TV, the resolution does not fit well and everything looks pixelated.My friend had the same problem but his laptop included the Catalyst Control Center and he made some adjustments and the problem was solved.I already installed the program but when i right click on my deskop the program doesnt show up on the options, on my control panel it says it is installed but it wont open for some reason.My computer is an HP Pavillion dv4-4068la with Intel HD graphics card.
View 2 Replies View RelatedWhat is the newest driver and how can I determine the current one?
View 3 Replies View RelatedI got a Sapphire Radeon HD 6700 series, my monitor is a little wierd so i was adjusting it with catalyst control center, later i updated catalyst and now it wont even open.
View 1 Replies View Relatedsetting up ATI Eyefinity Catalyst
View 3 Replies View RelatedHow to start catalyst control center
View 1 Replies View RelatedI've been having this issue with multiple versions of Windows 7 (beta, RC, and now retail), so I'm wondering what the issue could be. I did a search for this but didn't find anything - if there is a thread, please close this and direct me to the right place!Anyways, I have a Radeon HD 4850 and am using Windows 7 Home 64-bit. I have been trying to install the Catalyst Control Center (CCC) for quite some time now, but it always ends in the same result - a blue screen. I've downloaded several different versions since the public release of Windows 7 (tried about 5 driver versions) and each has been an equal failure. The only way I update my driver is by extracting the files from the CCC downloader and updating them via the device manager which works fine.
View 17 Replies View RelatedI currently connect my LG Flatron W2361V Monitor & my HD 5830 GPU with a HDMI cable, however some times when I turn my monitor off & come back to turn it on it takes a long time to pic up a signal & when it does system feels slow. However after checking the Catalyst Control Centre is showed my GPU Activity was 99% & it stops like that until I reboot.
View 4 Replies View RelatedOrdered a new XFX HD5850 Black edition which is being delivered tomorrow , for the nice sum of 111.Will be running it in crossfire with my current 5850.Do I just plug it in and enable crossfire in the catalyst control center or will I need to install drivers for this card first?
View 7 Replies View RelatedI just bought an HP Pavilion dv7-6120sx equipped with ATI Mobility Radeon HD 6770 running Windows 7 home premium. I've been trying to remove the scaling option in the Catalyst Control Center, but it detects no monitor under the Advanced Display Settings
View 9 Replies View RelatedI bought a pre-built desktop a little over a year ago. It cam with integrated graphics, an ATI Radeon 3000. I installed an HD 6670 shortly after. I now have a two monitor setup. I have my primary monitor hooked up to the 6670 and the secondary to the 3000. After updating CCC to 12.6 from 12.4 the second monitor isn't detected. I've been going to device manager and uninstalling the 3000 drivers, then restarting, and my secondary monitor is detected, drivers auto install, and both work. Unfortunately when I check CCC it's back to 12.4.
View 2 Replies View RelatedCatalyst Control Center is nowhere to be found in my PCPlease tell me where is the CCC executable so that I can run it manually.
View 1 Replies View RelatedI tried to set up my windows 7 but it said that my ATI catalyst control center is incompatible with windows 7. what should i do? Also i cant get rid of it because it is used for my graphics card.
View 8 Replies View RelatedI can keep getting a message that the Catalyst Control Center has stopped has stopped working and Microsoft is searching for a solution.
View 1 Replies View RelatedI am getting my desktop ready for the launch of Windows 7 and I done a check with advisor and it said I I have to get a update for 'ATI catalyst control center' and my version which was installed onn the desktop when I got it is1.2.2113.53 but I cannot find the update and all it says is version 9.9.
Ken
catalyst control center isn't appearing in catalyst install manager? i have uninstalled all ati stuff from my laptop and ccc simply won't appear, also, when installing the display driver, my screen resolution will always get ruined and becomes stretched and messed up. and i am having problems with battlefield 3, where my terrain becomes black and just a bunch of random boxes, similar to this - battlefield 3 graphics problem (black ground) (solved) - Internet but i'm trying to install catalyst bullshit and leads to my first question.
View 9 Replies View RelatedMy catalyst control center was bugged so i decided to just do a complete uninstallation, which was successful. When i went to do the fresh install, the install manager would not give me the option of install the catalyst control center even though i uninstalled it. i have been looking through various fourms for solutions, but i only found one that seemed appropriate but it failed. it was the solution of looking in windowsassembly and uninstalling the ATI related products with the public key code of 90ba70f846762.
View 1 Replies View RelatedI have a 8500 all in wonder 128 mb card. the machine is win 7. i can install the drivers, but cant seem to get the control center to install. when i do try to install it, the message tells me to install generic card drivers first. i have tried that to no avail.
View 2 Replies View Relatedi noticed that my PC had been using a lot of the SSD for information i felt should be saved on the HD. i read some forms and someone said that the C:USERS folder can simply be dragged to the HD so that everything is saved there. so i copied it onto my other HD and renamed it USERS2. unfortunately i noticed that this didnt and doesnt work and for some reason the USERS folder on my SSD has gotten renamed to USERS2 as well and the Catalyst Control Center application no longer works... i dont know how to fix it and im afraid that i might dig myself further into this mess.
View 7 Replies View RelatedAll of a sudden I cannot open CCC. The mouse flickers like it is loading it and then nothing occurs. I have uninstalled ATI 12.4 fully and drive sweepered it and reinstalled and still have the issue.
View 9 Replies View RelatedI suddenly have a message come up saing my Catalyst control center has stopped working
View 1 Replies View Related