Can't Get CANON BJC 210 To Print From XP MODE
Oct 27, 2012
Can't get CANON BJC 210 to print from XP MODE. Everything goes to PRINT QUEUE, and there appears no connection or communication with the LPT port. Windows print troubleshooting no help, and even printing attempts from command prompt results in nothing happening. Printer responds normally to beeps from holding down the power button, but nothing from print tests or commands from the computer.XP MODE works fine otherwise.I've made sure printer is online and tried unplugging and plugging back in the power supply several times.This particular printer model won't install in WIN 7, but worked perfectly in WIN XP prior to upgrade. Also careful to inactivate the USB option during installation with updated driver.
View 6 Replies
ADVERTISEMENT
Dec 1, 2012
my canon mg5320 wont print color only print black.
View 1 Replies
View Related
Sep 10, 2011
my printer will only print A5?
View 1 Replies
View Related
Feb 8, 2012
I have a PIXMA MG3150 printer and don't know how to get it to print over the wifi. I use windows 7. I'm not great with technology.
View 1 Replies
View Related
Jun 21, 2012
My printer won't print on paper. It keeps telling me it is out of paper....it's not. It tells me to load paper into the cassette, it doesn't have a cassette. The paper loads in the back of the printer, just off the top. It has plenty of paper.
View 2 Replies
View Related
Sep 24, 2012
I have installed the software and the printer will print via usb but won't print via wireless. It will however scan wirelessly.
View 1 Replies
View Related
May 23, 2011
I noticed someone else had found this driver on the Canon sight but the only one I found today was an add on file not a whole executable driver.
View 1 Replies
View Related
Oct 19, 2012
I NEED CANON MF4400 DRIVER FOR WINDOWS7
View 3 Replies
View Related
Sep 12, 2011
Looking for Canon MF4400 Drivers for Windows 7 64 Bit
View 5 Replies
View Related
Oct 30, 2011
good evening to all please kindly help me from where i will get the canon MF 3100 printer driver for windows 7 64 bit os.
View 1 Replies
View Related
Sep 27, 2012
how do I mirror print on the Canon MP560 for printing a T Shirt
View 1 Replies
View Related
Aug 17, 2011
I got a new PC at work that has Win7 Pro 64-bit (SP1) on it. Unfortunately, my printer (an HP Laserjet 1000) doesn't support 64-bit and it won't install.
So I created a Virtual PC with XP Mode and installed the driver there. I was able to print from within the VPC XP mode. But here's the problem: I would like the ability to print something from Win7. Is it possible to print something from Win7 so that it goes to the VPC printer even though the printer isn't installed in Win7? If so, can ya dumb down the instructions for me?
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Professional , Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 1995 Mb
Graphics Card: Intel(R) Q45/Q43 Express Chipset, 773 Mb
Hard Drives: C: Total - 152485 MB, Free - 112861 MB;
Motherboard: Dell Inc., 03NVJ6, A02, ..CN7360409R0636.
Antivirus: Microsoft Security Essentials, Updated and Enabled
View 10 Replies
View Related
Nov 2, 2009
I have an old printer (Brother 1430) attached to my new PC running windows 7 via the LPT1 port. It works well in Windows 7 but I am unable to print from XP mode.
I have installed the drivers into XP mode and it seems to be recognised by XP but no luck with printing. Have tried a USB connector but again no success.
View 2 Replies
View Related
Mar 17, 2011
I'm using Win 7 Pro logon as user with administrative credential. I need to do printing in DOS mode. The Case is : I type Net Use LPT1: \printserverp1 in DOS mode, it displays the command completed successfuly. The connection was made when I look at it again by using net use. But when I send a command 'dir/w > lpt1 ' in dos mode, it shows access is denied. It doesn't allow me to send a print job
View 2 Replies
View Related
Mar 20, 2012
I've been trying to print from the Windows 7 XP Mode, with no success. How do I set up the Win7 XP Mode so I can print from it. I have a Laserjet 1320 printer. It prints fine from Windows 7.
View 12 Replies
View Related
Jun 2, 2011
I've been aware for about a week of my computer's seeming sudden inability to go to sleep. Slow learner that I am, I finally realized, okay, it was a week ago that I replaced my old HP printer with a Canon iP4820. Windows 7 will not always go to sleep - related to printer spooler??? describes a phenomenon I think I'm seeing. The computer is almost never asleep, and in fact a lot of the time the display is on, when it used to go dark.Is/could the Canon printer be the reason my computer fails to sleep so much lately? (looks like answer is yes) What can I do, without overly compromising printer function, to have it stop taking over my O/S so much?
View 3 Replies
View Related
Oct 18, 2009
Printer is a Canon LBP5100 with 32-bit driver only.
Can I install a 32-bit printer driver in XP mode and gain the full driver usage (auto duplex) then use the Windows 7 64-bit inbuilt driver whilst in Windows 7, or is the driver shared between Windows 7 and XP mode?
In other words can I use the same printer in (Windows 7 + XP mode) but use two different drivers 64-bit in Windows 7 and the 32-bit in XP mode?
View 1 Replies
View Related
Sep 25, 2012
I've been using various print drivers for various locations with success for a month with my new laptop. Today, all drivers gone.Loading new ones doesn't work. Print spooler is not "started;" it starts successfully, then is not "started" next time I look.Other possibly relevant information: HP 1020, HP MX 340 at home office.Tried: multiple restarts of print spooler, multiple reboots, troubleshooters, HP detect and download drivers?
View 5 Replies
View Related
Feb 11, 2011
(Windows 7 Home Premium 64-bit, HP LaserJet CP1215)When printing from Word (or any other normal application) the documents just sit in the print queue with Status = "Error - Printing".If I stop, then re-start the Print Spooler service, they then print.Strangely enough, this does not happen if I print from the HP printer diagnostic utility.I've done complete re-install of the entire printer driver suite and I'm pretty sure everything that end is OK. So what's happening with the spooler? The error message isn't exactly very revealing
View 9 Replies
View Related
Mar 30, 2012
My HP 6500 all in one will print test pages but will not print from my computer. It worked fine up until a week ago?
View 2 Replies
View Related
Jan 23, 2013
I'm on Windows 7 and have run into the annoyance of my PrtScn key actually bringing up the print dialog box to print. It still copies the screen to the clipboard for a paste into paint, but I can't figure out why it's bringing up the dialog to print or how to turn that off. I have seen it before maybe 8 years ago on Windows XP but do not remember what was done to correct it. When I try to search, I just find posts about it not working or how to turn the whole screen capture function off for the PrtScn button.
View 4 Replies
View Related
Dec 11, 2009
Vista x64 natively supported a bunch of canon printers with x64 drivers. For some printers this support has gone under Windows 7 x64. Perhaps this will help some people ... .
I mounted a Vista x64 ISO-image/source, extracted the folder with the canon printer drivers and installed the Colorpass Z40e driver under Windows 7 x64. In my case I used this driver für a Canon Colorpass Z400e (Canon CLC 1100).
Extraxct :
- use 7zip
- under options check "wim"
- open the install.wim an verify your vista version (important if there is a 64bit and 32 bit version on the same DVD, in my case there was only a 64bit on the systembuilder DVD)
- choose the right folder and extract the canon printer driver folder with 7zip
windowssystem32driverstorefilerepositoryprnca001.inf_c505b61f
that is it .
View 0 Replies
View Related
Nov 8, 2009
Upgraded desktop to 64-bit and discovered that my Canon LiDe80 and Canon PIXMA iP4000 drivers are incompatible. So after some research and not sure how accurate, I read that the professional version would allow more of the 32-bit drivers to work.
Is that correct?
View 4 Replies
View Related
Nov 15, 2012
my computer, a Lenovo Idea pad P580 running on Windows 7, is 5 weeks old and yesterday I was using Microsoft Word to edit a document and Word suddenly crashed. So I closed it, but then the cursor started spinning and I could not access anything on my computer so I rebooted and it started up but then just trying to open Microsoft Word caused the cursor to keep spinning again and I could not access anything. So I again rebooted and this time it was spinning from the beginning. So I again rebooted and turned it on in safe mode and everything was fine. Then turned it off and left it off overnight. In the morning I tried to boot in normal mode and it did boot but it was again spinning and I could not access anything. So I again rebooted in safe mode and I can use my computer fine.And also, this is unrelated, but I was wondering if anyone could tell me what I need to do to make the scroll bar stop moving on its own? Every time I scroll down a page it seems to lock the scroll bar and so when I move the cursor away from the scroll bar, the scroll bar still moves and I cannot click any links or anything on that webpage.
View 6 Replies
View Related
Aug 1, 2011
the computer I am concerned with is running Windows 7 with IE8, Microsoft Security Essentials and Malwarebytes Anti-Malware. I am currently in Safe Mode with Networking without issue.The owner of the computer says that something happened earlier today while he was online that sounds like some false antivirus popup, but he's unsure. Here are the symptoms in normal mode. Every application, from moving through them to opening and closing them, runs exceptionally slow - one to three minutes to open, at least a minute to open internet pages. I noticed that, when in IE, as the pages are loading the IE page disappears and reappears. I am not very familiar with Windows 7 so I don't know if it is related. The computer seems to be getting slower as the day goes on. CPU usage is very high.So far, I have disabled many startup items that were unnecessary. I ran CCleaner and cleaned up. MBAM was run in both normal and safe mode, full scans, and found nothing. This is also posted in Viruses and Malware, but I'm unsure where it should live.
View 2 Replies
View Related
May 8, 2012
window 7 working on safe mode and unable to choose the another restoration point and it is not loading in normal mode -after installed third party software worked on that for few hours, then after switched off and later it switched on then after this problem started, automatic repair done, nothing is notified
View 1 Replies
View Related
Nov 25, 2012
i recently ran into a problem with starting up my computer. I have the blue screen of death. I've tried safe mode. It won't work. I would click safe mode it would load and then go back to the blue screen. I have a lenovo laptop and I'm not trying to pay 150-200 for it!
View 3 Replies
View Related
Oct 8, 2012
I own an HP G-62-347 Notebook, Windows 7 64 bit, Microsoft Security Essentials, Windows Firewall, no other real time AV, no other Firewalls, Windows Defender disabled as Microsoft instrucs for MSE, 3 GB Raam, 313 GB HDD, AMD Dual Core P-380 processor.My Laptop began freezing 8-10 minutes after bootup logon. No matter what I was doing, Media, Excell, Word, it would freeze up and hang. Sometimes CTL_ALT_DLT would unfreeze it, even before the task manager appeared, but it will take 3-4 minutes with an o[ague screen and the progress "circle" moving then unfreeze, sork 1-2 minutes, freeze, etc. Then all clicks on something to activate would result in loooong (long) delays, 15 to 45 seconds, then the new screen or window or peogram would open, sometimes frozen up.This did not happen in safe mode.I have (on suggestions) removed all things from my start up or programs that other's have suggested, Google Update files, and three or four others that others had issues with that I found on the net. I have also removed programs that I had installed around then.
I have also run, in Safe Mode, MSE, MS Safety Scanner, MS malicious file remover, ESET online Scanner, my laptop is clean.I have used mscong to disable all non-microsoft items to see if that helped. It did not. Same issues.I have used startup repair, and after scanning received a message that there was a problem, but that it could not fix it, did I want to send a report to Microsoft, I checked yes and it sent me to System Restore, ran it for about a week ago which was when I had downloaded some software, and the problem still existed, which sent me back to System Repair, ran it, same error message, reported again.I used a Repair Disk to get back on the laptop a coulple of times when needed, but ultimately, the problem surfaced still.I have used ReImage Plus to rebuild all my defective Windows Files and a lot of my 3rd party defective files. And, I also did a Win 7 repair install.I am pretty convinced something is being loaded somewhere, but can't find where or who or what.Am I on the right track? Have I missed something? Am I wrong? I do not really want to do a clean re-install of Windows 7, for if I do I am reformatting everything to clean any and everything.... sort of NUKE it... but would rather find the culprit (for education purposes). And, I dislike installing and updating and setting up everything again more than I hate "boiled okra!"Anyone and Everyone that has had to do with this or similar sounding issue, please reply. I have two weeks invested, and would like to "graduate" resolving this and getting the learning experience of WHY?
View 15 Replies
View Related
Jan 16, 2013
I am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.
View 1 Replies
View Related
Feb 8, 2012
I have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:
An error occured while attempting to generate the report. The system cannot find the path specified.
View 6 Replies
View Related
Apr 25, 2012
My laptop hangs up/ freeze in normal mode. Now I can only open it on safe mode. I was only copy pasting some files couple days ago when it happened. I have to hold the power button to turn it off. I already tried system restore and reformatted it twice. I'm using HP Pavilion dm4-1160us, windows 7 64-bit.
View 12 Replies
View Related
