I just recently got a new motherboard and video card for my computer. I had to reinstall my Windows 7 Pro, and therefore all of my programs. Whenever I open a saved project in Protools 8 LE I get the BSOD mid-load. [URL]and followed the instructions for getting the dump file.
View 2 RepliesI have Windows 7 64bit and downloaded some updates today and Windows 7 SP3. Since then I can't open the "My Documents" folder I had on my Desktop. I don't get any messages. It just won't open. Also on my taskbar I have a shortcut that shows my Libraries. I can access the Music and Video Libraries when this opens. But not the Documents or Photos one's. I get a click sound, but they won't open. I also can't save any picture project am I am working on in the photo's library. It just says I can't save there.
View 1 Replies View RelatedOn my laptop whenever i open a TV series show subbed by X group by media player i get a bsod with any episode. Other shows subbed by that X group work fine for me. On my desktop i have no problem at all playing those video.
View 4 Replies View Relatedstarted getting BSOD a few days ago, thats when i realized my sister didnt have any virus protection on her computer. kinda late i know... so i downloaded avg and did a few scans with it. everytime i ran a scan it would find 60 tracking cookies or more and about 20 rootkit's but it would not remove the rootkits. i found somewhere that unhackme could get rid of the rootkits so i downloaded that. it found a trojan and attemped to remove it, then rebooted the computer. now nothing will open on the computer. i have a log that unhackme created dont know if that is helpful.
View 1 Replies View Relatedi got same problem but i got it when i try to open any game online idk what this error as this first time to me work on this windows Build 7057
and this is the error i got .
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7057.2.0.0.256.1
Locale ID: 3073
Additional information about the problem:
BCCode: f4
BCP1: 0000000000000003
BCP2: FFFFFA8001E67B30
BCP3: FFFFFA8001E67E10
BCP4: FFFFF8000297D610
OS Version: 6_1_7057
Service Pack: 0_0
Product: 256_1
I've got a new system, and almost at random I get a BSOD on occasion. No excessive system load, and the only correlation I can see is that Firefox had been open each time. I've included CPUZ screen shots in addition to the dump files.
System:i5 3570k, Gigabyte GA-Z77X-UD5H (F7 BIOS), Corsair Vengeance DDR3 1600 CAS9 2 x 4GB (Running XMP profile), EVGA GTX 480,SeaSonic Platinum 860w PSU, Cooler Master Hyper 612 PWM, Cooler Master HAF XM case with 2 extra 140mm side intake fans.
I have a small network of six computers. Five of them run XP and I just added a Windows 7 machine. I've got a Microsoft Access 2003 database that all of the computers share that is hosted on one of the XP machines. The Windows 7 machine can access the Access database through the network just fine, as long as no one else is accessing it. However, if someone else on an XP machine on the network is using the file, it won't open on the Windows 7 machine. Doubling clicking the file on Windows 7 gives me the circling blue icon for a second or two, then nothing happens. If the XP user exits the database, then I can open it fine.
View 3 Replies View RelatedWhen I have a couple of screens open on my desktop. When I click on an icon for, lets say, iTunes, I can see the iTunes window appear behind the translucent taskbar of Win 7. Ditto for MS World.How do i get programs that are already open to open up with ONE click, instead of having to closed down all the other windows.
View 3 Replies View RelatedFor a while my windows 7 64 bit would open my images in Documents. Now when I try they appear as a garbled strange format. If I go to PSP ProX2 they open fine. This is a problem for me since I often need to add images to document Newsletters I send out.
View 3 Replies View Relatedevery program i try to open, windows asks open with?
View 2 Replies View RelatedI have a fairly new HP Desktop PC. I'm running Windows 7 Home 64-bit SP1. Yesterday I noticed that iTunes won't open when I double-click on the shortcut icon on my desktop. I restarted my computer, same issue. I restarted in Safe Mode, same issueI did notuninstall/reinstall because I also can't open my Spybot-SD. Same thing happens. The process is listed in Task Manager, but the programs just don't open. I have not trieduninstalling/reinstalling the programs because I tried doing a System Restore back to early February. The System Restore was successful but the problem persists. Also, Windows Media Player opens, but it opens weird, wherein it freezes on a white square for a few minutes before finally loading. Also, my DVD burning software, DVD Flick, opens but first it freezes on a yellow square.
It's hard to Google this problem because of all the programs involved, and I'm sure there are more programs that won't open that I'm just not aware of yet. I didn't do anything that I can think of that could've caused the problem (and if I had, the system restore would've fixed it). So I scanned my PC for viruses with Symantec and I also scanned for malware with Microsoft Security Essentials and both scans came up clean. Not being able to use iTunes presents a problem because I can't update my phone or make changes to my phone at all.
My girlfriend recently lent me her laptop (Windows 7 32bit) it was still using IE so when I go to install chrome the built in 'security program' (Windows 7 internet security 2011 or something like that) tells me that chrome is a threat and wont let me use it.. Now after finding out that Windows 7 internet security 2011 is a joke and just wants my money I run spybot search and destroy, it finds plenty of viruses and such like which are all removed.Now I have the strange problem...When I try to run any program or file the 'open this file with' window comes up. With some programs I can browse the program files and locate the program, select open with (I can't select 'always use the selected program') and away we go, but with others it simply doesn't open or will open the program in the background (unusable) and give me the 'open with' window again.. I have tried putting the Malwarebytes installer on USB but the laptop still gives me the 'open with' window when I try to install that
View 4 Replies View Relatedif i go to the start button to go to my computer the window will open on the first try , but say i try to go to my computer again it will just sit there and not open. the exployer window will open but not the contents inside.does not care how many times i try it will only open the window and show nothing inside , a bar will go across the top to show progress but still it will not open.if i restart the computer i can open up the my computer or just computer in W7.like right now i tried to open up the window to check my hard drive and im still waiting for it to open.this goes on on both of my computers running windows 7.all coms are updated to the fullest and im not overclocking or doing anything other normal stuff.So is there a bug or somthing that im missing , once again if i go to start , and hit computer the window will open on the first try , but if i do it to many times it will just open a window and just sit there.even further if i open it up and try to open a file it will just hang there and not open , there is no error warning or nothing.
View 1 Replies View RelatedIm having a problem with opening files I use to open with two programs. One is mkv, vob and divx files with homecinema. And snes roms with an emulator. Basically win 7 would let me select the program and it would show up on the list of programs to use. I would select always use and I'm done. But I moved the folders containing the files to a different folder and now my two programs I use will not show up in the open with list. I now have to go to the program itself and search for the files. Its a pain because I could click on the files and get right to them.
View 4 Replies View RelatedI'm Running Windows 7(64bit)Each time I boot into Windows 7 Prem (64) a open window apears requesting my username at the top of the open window to specify a a program to open it?I've clicked on note pad and I get the following information that apears, each time though it requests, or looks for a program to use to open.
===========================================================================
Interface List
1...........................Software Loopback Interface 1
14...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter
16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
[code]....
I have a small network of six computers. Five of them run XP and I just added a Windows 7 machine. I've got a Microsoft Access 2003 database that all of the computers share that is hosted on one of the XP machines. The Windows 7 machine can access the Access database through the network just fine, as long as no one else is accessing it. However, if someone else on an XP machine on the network is using the file, it won't open on the Windows 7 machine. Doubling clicking the file on Windows 7 gives me the circling blue icon for a second or two, then nothing happens. If the XP user exits the database, then I can open it fine. Permissions on the XP that is hosting the database is set to allow everyone. And all the XP machines can access it at the same time.
View 9 Replies View Relatedi'm trying to install at bios and easy tune 6, but for some reason it comes up saying open driver failure, or open driver handle failure. what do i do?
View 2 Replies View Related"Open device failure/ open driver handle failure" message when installing gigabyte utilities. The install fails. Does anyone know what might be causing this message?
View 3 Replies View RelatedCan't open programs without the "Open With" window popping up!
View 1 Replies View RelatedI tried to open a program using the open with option and it changed the icons for every program on my laptop. I changed the desktop (network, my computer etc) icons back to default but can't manage to change the others. If i go into properties for the program and change it that way it doesn't do anything.
View 2 Replies View RelatedI just got a new Samsung RC420 laptop with Windows 7 Home Premium edition OS. When I was installing a software last night, a message pops up and tells me I cannot continue installation until I close a certain program (in this case it was Adobe Updater, which was not opened at all).Today, I am trying to open "my briefcase" from a USB thumb, but a message pops up telling me I cannot open "my briefcase" as it appears a file in it is already open. But nothing else is open on my computer. It was my first time opening anything from the USB thumb.
View 4 Replies View RelatedCan't open any programs cuz this annoying window "Open with" pops up asking what application I want to open this file with? If I go browse and select the file (i.e. IE) then another window opens asking if I want to run, save or cancel. When I hit Run.... windows close and nothing happens. Pretty much dead in the water here. Tried recovery to an older config...
View 1 Replies View RelatedI am writing this right now because after the last BSOD it said "Windows can not start" and I had to restore to when it was previously working. So up until that point this is what I did.Since working with computers almost my entire life I know most BSOD are due to either bad memory, drivers, or bios. I started there and updated my nvidea drivers but it happened again. I moved to the motherboard bios.I did find a newer one on there and using ASUS tool I flashed the BIOS. Same thing still happened. Next I ran memtestx86 for 8 hours and it returned no errors.At this point I just decided to look for newest drivers for everything. One thing that happened consistently was that my wireless USB adapter from Cisco had to be unplugged and plugged back in for it to work. I went there first, reinstalled the drivers but still the same thing. I thought maybe it was my hard drive. I downloaded Seagates Utility tool and ran all the tests and they all passed fine. I ran defrag just for good measure along with windows version of the mem test and that passed as well. I still continued to get the BSOD and I have to tell you I'm irritated and also stumped.
Next I moved onto software. I have been using AVG free for years but I know virus programs do some crazy stuff and I got rid of that. Turned on windows defender. I decided that since the wireless adapter didn't work after these crashes maybe lets just go to a direct wired connection. I disconnected the cisco wireless adapter and I'm just using a direct connect right to my router.These come at random times.. nothing I do can trigger it. It can stay on for days and not crash and then there are times it can be up for 10 min and crash.Some of you might notice that in the CPU-Z screenshots I had to take the screenshot with the error underneath. Every time I chose either of the two slots it crashed the program.I have not done anything internally besides add some neon to my computer which does not connect to the board at all.I have seen IRQL blue screen once so I even went as far to go into the power settings for windows and make sure the usb and everything never went into any kind of "standby" mode.
I believe this is still under warranty and I would like to go in with good information if I need to challenge and get new hardware if that's what it is.On a side note I have not touched the memory physically. I know some suggestions were to reseed the memory and chip but In my opinion something that has been working for months that never moves off my desk and is never basically touched besides the power button shouldn't mean something just came loose after 4 months of owning it.Again that's just my opinion. I have removed AVG, Ad-Aware, Some webcam motion detector software (which was a joke) and the only thing that was really installed was Skyrim.
1 x Case CoolerMaster HAF 932 Full Tower Gaming Case - Black 1 x Case Lighting Liquid Neon Thunder Pattern Light - Red 0 x iBUYPOWER Labs - Noise Reduction None 0 x iBUYPOWER Labs - Internal Expansion None 1 x Processor Intel� Core� i7-2600K Processor (4x 3.40GHz/8MB L3 Cache) 0 x iBUYPOWER PowerDrive None 1 x Processor Cooling Asetek 550LC Liquid CPU Cooling System (Intel) - ARC Dual Silent High Perfornamce Fan Upgrade (Push-Pull Airflow) 1 x Memory 8 GB [4 GB X2] DDR3-1600 Memory Module - Corsair or Major Brand 1 x Video Card NVIDIA GeForce GTX 580 - 1.5GB - Single Card 1 x Video Card Brand === High Performance === EVGA Brand Video Card Powered by NVIDIA 1 x Free Stuff [Free Game Voucher] - Dungeon Siege 3 - Free with Purchase of NVIDIA GeForce GTX 550 or above 1 x Free Stuff [Free Game Download] - Just Cause 2 - Free with Purchase of NVIDIA Video Card 1 x Motherboard [SLI] ASUS P8Z68-V -- 3x PCI-E 2.0 x16, On-Board Bluetooth, Lucid Virtu Technology 0 x Intel Smart Response Technology None 1 x Power Supply 1000 Watt -- CoolerMaster RSA00-AMBAJ3-US 1 x Primary Hard Drive 1 TB HARD DRIVE -- 32M Cache, 7200 RPM, 6.0Gb/s - Single Drive 0 x Data Hard Drive None 1 x Optical Drive [12X Blu-Ray] LG BLU-RAY Reader, DVD�R/�RW Burner Combo Drive - Black 0 x 2nd Optical Drive None 0 x Flash Media Reader / Writer None 1 x Meter Display NZXT Sentry LX Aluminum Fan Control, Clock, and Temperature Display 0 x USB Expansion None 1 x Sound Card 3D Premium Surround Sound Onboard 1 x Network Card Onboard LAN Network (Gb or 10/100) 1 x Operating System Microsoft Windows 7 Home Premium + Office Starter 2010 (Includes basic versions of Word and Excel) - 64-Bit 1 x Keyboard Thermaltake eSPORTS CHALLENGER PRO Gaming Keyboard 1 x Mouse Thermaltake eSPORTS BLACK Professional Gaming Mouse 1 x Monitor 27" LCD 1920x1080 -- Sceptre X270W-1080P 0 x 2nd Monitor None 0 x Speaker System None 1 x Headset Thermaltake SHOCK Spin Gaming Headset - w/ Ergonomic Shaped Velvet Ear Cushions, Neodymium Magnet Speakers, In-Line Volume Controller & Independent Microphone Box 1 x Video Camera Connectland 1.3MP USB Interface WebCam 1 x Advanced Build Options iBUYPOWER Specialized Advanced Packaging System - Protect your investment during transportation! 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Achieve exceptional airflow in your chassis 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Basic Pro Wiring 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Advanced - Power Package (Individually Sleeved 24-pin ATX, 8-pin CPU, and SATA Drive Power Cabling) 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Advanced - Video Package (Individually Sleeved 8-pin and 6-pin PCI-E VGA Power Cabling) 0 x Case Engraving Service None 1 x Warranty Standard Warranty Service - Standard 3-Year Limited Warranty + Lifetime Technical Support 1 x Rush Service Rush Service Fee (not shipping fee) - No Rush Service, Estimate Ship Out in 5~10 Business Days
This started happening last night while i was playing Borderlands 2, it has happened at idle, playing just about any game in my library, during downloads and just browsing the web. I changed all of my accessible drivers, and it continued to happen, so i moved all of my personal files onto my external HDD. I re installed windows on my SSD (did not reformat) and reformatted my HDD. I re installed my drivers, re-enabled SLI and it ran fine for about an hour, just downloading WoW, and then happened again twice.
View 2 Replies View RelatedI started getting BSOD two weeks ago. As far as I can remember the first time I had a BSOD was on the day I installed Max Payne 3 (I read somewhere that the some guy had also this problem when he installed max payne). There were two occasions that I got a BSOD upon starting Max Payne 3. But lately I'm getting BSOD when doing low-load stuffs like browsing with no other apps opened. I've already done memtest with 10 passes with no errors. I'm 24 hours prime95 stable. I just don't get it! I've manually set my timings for my ram. I'm not doing any overclock. Everything is on stock settings.
View 2 Replies View RelatedI am brand new to this site so forgive me if I miss a step. I was wondering if someone who is good at debugging dump files could give me a second set of eyes on these 2 I will attach. One BSOD is DRIVER_POWER_STATE_FAILURE (ntoskrnl.exe) and the other is UNEXEPECTED_KERNAL_MODE_TRAP (ntoskrnl.exe).I have this problem across 15 identical laptops with fresh installs of Win 7 Pro 64Now my guess is this will boil down to a BIOS upgrade, but if there are driver conflicts within these dump files
View 6 Replies View RelatedI am the developer of a driver for a network adapter device that does scatter-gather DMA. Driver is not newly developed, but has had some recent changes.My client has a puzzling BSOD on one x64 machine after about 18 hours of successful operation. My x64 Win 7 machine runs fine forever. Client's box crashes in seemingly random places that indicate mem corruption.Mem test on machine was clean. Minidump is attached. WinDbg stack doesn't trace back to my code - it just shows the calls to handle the exception. Any clues y'all can see?System info from WinDbg:Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64Product:WinNt, suite: TerminalServer SingleUserTSBuilt by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506One difference between client's x64 and mine: Theirs has a valid DMA MapRegisterBase pointer from a AllocateAdapterChannel call, where mine (and my x86 systems) always have a null DMA MapRegisterBase
View 1 Replies View RelatedMy computer has been stable for years, however recently I have been getting BSOD when doing any task. Windows will sometimes load to the desktop and I am able to watch video, run windows score, check email, etc before it will BSOD. Other times, it will BSOD before getting to the windows login screen.When I use safe mode, it logs in and stays there - no BSOD.I have tried removing all extra hardware in the machine, however this has had no affect. I have also tried one stick of RAM, then another, both BSOD.
View 3 Replies View Relatedcomputer, as I am not familiar with Windows 7. When he attempts to open an application (any application) it opens an "Open With" window with only IE 8 and Word Pad as the only recommended programs.He's figured a PITA work around by right clicking the application icon and selecting "Run as Administrator" and then it opens after clicking through the security window. My initial thought was that his account was somehow changed from an Administrator account to a standard account, but that proved incorrect.I'm thinking it's some virus or malware that's causing this, but I see no other apparent signs of infection (i.e. degradation in performance) and he is protected by a current Antivirus (Eset), so I'm also thinking there may be some corruption of his system files, but like I said, I'm a novice where Windows 7 is concerned.
View 6 Replies View RelatedWindows 7, 64bit, volume license (though OEM on the machine is also windows 7 64bit)1 month old hardware (10 days since I added memory). 18 month old OS install (backed up and restored, and drivers updated to new hardware)(Note that the older BSODs in the zip file are from old hardware)
View 1 Replies View RelatedI was having many random bluescreens on my old home build. I upgraded my Videocard to an Nvidia GTX 550 Ti thinking that it was videocard related. After fresh install I'm still getting BSODs.
View 3 Replies View Related