I had this machine built just over a year ago, and only had occasional crashes (no particular activities seemed to generate the issue). About 2 months ago the crashes became more persistent, and upon restarting the machine would have trouble loading normal mode. At the screen that reads "welcome" the spinning wheel would simply freeze, and the computer would lock up. As this problem persisted the computer would either automatically reboot itself each time, or crash into a BSOD and run a dump. I can, however, start it in Safe Mode without issue. It had been running the same install of windows 7 ultimate x64 until a couple of weeks ago when I attempted to reinstall. This solved nothing, so I reinstalled again, this time deleting the partitions and formatting the drive. Again, the problems persist. I'm inclined to think they're hardware related at this point, but I'm in no way an expert.
I'm having some trouble starting Windows. First I was having trouble with booting into safe mode so I done some Googling and I found this page and tried it [URL] now not only can I not start my PC in safemode but not in normal mode either, with checking the option for safe mode in msconfig it now keeps trying to start my PC in safe mode over and over again. I also cannot start my PC with the last known configuration.
I tried repair my PC with my DVD but that cannot fix it. There is no system restore point or recovery saved.
I have SLI GTX 580s. Yesterday I was playing a lot of The Secret World and the computer was working fine. I shut down and today when I try to start it up I get a BSOD and the computer reboots. I can start it in safe mode and I get this message:[CODE]I tried both cards by themselves, one of them works fine but the other one gets these errors. I don't know what to do. They were both absolutely fine yesterday, no artifacts show up on screen for the card that isnt working, just when I install Nvidia drivers it all goes to hell.
I've been looking for a fix for 5 hours and no luck- System restarts as soon as it enters the splash screen, but I can enter into safe mode - SFC /SCANNOW Detects nothing.
Tried bootrec commands and did nothing.. . Tried chkdsk /f /r and still nothing. . . Tried start up repair like 30+ times and it didn't fix it and said no root cause.
I have a Compaq persario CQ62 laptop i was on facebook about a week ago and signed out and my computer froze i powered it down and when i turned it on i thought it was going to start and then it went to a blue screen. I am doing this from another computer because i cant get that one to boot from anything disk or drive. I can not access safe mode or repair mode If i try to load safe mode it does not even show me the file its loading.
So I just got back from a 3 day vacation, and when I came back I rebooted my computer only to come back to the "Start Windows Normally/ launch startup repair" naturally I chose startup repair, it froze. Tried starting normally, took me back to the same page. So I tried booting in safe mode, took me to the BSOD that read Bad_pool_header. So then I tried to putting in my windows 7 installation disc to see if I could do a system recover from there, but as soon as I try boot up with the disc it takes me back to the same BSOD. I feel completely stuck as I've tried everything I can think of.
my computer was running fine then yesterday i suddenly got shut down and anytime i turned it back on i would get a BSOD after a few seconds unless i went to safe mode its a page_fault_in_nonpaged_area 0x00000050.the only thing different is i downloaded borderlands from steam, played for about 8 hours, then got the packs running, then 10 mins later it shut itself down on its own currently system restore only had 2 options for 8am when i downloaded borderlands, 1 said critical system update adn the other was direct x 9 im not good with computer hardware so if u need any more info tell me, but heres some system stuff System Info Processor: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz
I can only run Windows 7 Home Premium (different computer than the one I'm posting from) in safe mode. When I try to use the Diagnostic Tool, it says that it is saving the files but then it doesn't finish up with giving me the folder on my desktop. How I can get the files to show so that I can attach them to this thread?
my computer, a Lenovo Idea pad P580 running on Windows 7, is 5 weeks old and yesterday I was using Microsoft Word to edit a document and Word suddenly crashed. So I closed it, but then the cursor started spinning and I could not access anything on my computer so I rebooted and it started up but then just trying to open Microsoft Word caused the cursor to keep spinning again and I could not access anything. So I again rebooted and this time it was spinning from the beginning. So I again rebooted and turned it on in safe mode and everything was fine. Then turned it off and left it off overnight. In the morning I tried to boot in normal mode and it did boot but it was again spinning and I could not access anything. So I again rebooted in safe mode and I can use my computer fine.And also, this is unrelated, but I was wondering if anyone could tell me what I need to do to make the scroll bar stop moving on its own? Every time I scroll down a page it seems to lock the scroll bar and so when I move the cursor away from the scroll bar, the scroll bar still moves and I cannot click any links or anything on that webpage.
the computer I am concerned with is running Windows 7 with IE8, Microsoft Security Essentials and Malwarebytes Anti-Malware. I am currently in Safe Mode with Networking without issue.The owner of the computer says that something happened earlier today while he was online that sounds like some false antivirus popup, but he's unsure. Here are the symptoms in normal mode. Every application, from moving through them to opening and closing them, runs exceptionally slow - one to three minutes to open, at least a minute to open internet pages. I noticed that, when in IE, as the pages are loading the IE page disappears and reappears. I am not very familiar with Windows 7 so I don't know if it is related. The computer seems to be getting slower as the day goes on. CPU usage is very high.So far, I have disabled many startup items that were unnecessary. I ran CCleaner and cleaned up. MBAM was run in both normal and safe mode, full scans, and found nothing. This is also posted in Viruses and Malware, but I'm unsure where it should live.
window 7 working on safe mode and unable to choose the another restoration point and it is not loading in normal mode -after installed third party software worked on that for few hours, then after switched off and later it switched on then after this problem started, automatic repair done, nothing is notified
I am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.
My laptop hangs up/ freeze in normal mode. Now I can only open it on safe mode. I was only copy pasting some files couple days ago when it happened. I have to hold the power button to turn it off. I already tried system restore and reformatted it twice. I'm using HP Pavilion dm4-1160us, windows 7 64-bit.
I can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.
Windows 7 x64 does not boot into Safe Mode or Safe Mode with command prompt. Normal mode boots perfectly. Are there any suggestions on how to resolve this? I've tried startup repair and attempted fix boot, etc. No affect. The unit is free of infection. I also tried using SFC, but it said everything was fine.
I seem to be having quite the problem on a computer of mine. After recently installing the directx sdk I am unable to logon through normal or safe mode. When I try to boot up normally, I log in but then the monitors go black but everything else seems to run. Pressing ctrl alt delete works and brings up the screen again but if I try to select task manager for example the screen goes black again. When I boot up through safe mode the computer restarts seconds after loading the windows logon screen.
I have a Laptop HP pavilion Dv4 my graphics card is AMD M880G with ATI Mobility Radeon HD 4200, my processor is AMD Turion(tm) II dual core mobile M500. The thing is i was playing Tropico 4 and i paused it then it began to mix pixels i couldn't see nothing, then i restarted and this is what happens:I cant see nothing, all is mixed up. on safe mode runs well.I played driver san francisco, fallout new vegas before and any of this happened.
I have Windows 7 on Laptop. My mouse stopped responding in the Windows normal mode but functions fine in the Safe mode. I restarted the laptop several times but the problem remains.
i bought my hp pavilion dv6 laptop in 2010 and the warranty went out on 2011, i turn on my laptop and i only get the quick web. Every time i try to start window it tells me it cant. i can not even get on safe mode. it asks me to repair my computer but every time i click on that i get a blank blue screen (baby blue color). i have tried to go on safe mode it wont let me, i tried to go on safe mode command prompt and it still wont let me,
I have a HP Probook 4430s and under device configurations in the F12 options, what does "Numblock on at boot" mean and what does it do. I'm still having troubles booting up.I can start up in safe mode and w/networking and have been trying to figure out how why it dosn't want to work right. When I'm in safe mode everything works fine but when i shut down and try to power back up i can only do it in one of the safe modes, also it takes a really long time to even do that.So I was just wondering what Numblock on at boot ment and what it does.
I am using windows 7 32 bit on my computer. while booting my computer initial windows 7 logo appears with keyboard num lock lit; but after the logo stuff; the user choice screen should have appeared but; the num lock key goes off and doesn't re light and black screen appears. But it works fine with safe mode and safe mode with networking?? What could be the problem??
Ok windows stucks on welcome, it will not boot so i am doing a startup repait but its stuckIt asked meif i want to do system recovery and i clicked no cancel , (only repair) but the blue bar that moves while its repairing it doesnt move its frozen and it says attempting repairs... nothing moves
I'm in a bit of a jam, and I'm hoping somebody might have a suggestion for me. My computer had been running slowly and freezing a lot, so a few days ago I went through and deleted temporary files, changed it so fewer programs would run at start-up, uninstalled Adaware because I had read that it could conflict with antivirus software, ran a scan in avast, and then restarted. After restarting, the computer got to the blue welcome screen, and then stopped before it finished loading. Since then, I've only been able to boot in safe mode.I thought I might have a virus, so I ran some scans over the weekend at the advice of somebody on a different website's forums, but I haven't gotten anywhere.
I recently bought a new Dell XPS Ultrabook 13 with i7 processor. It worked fine for about three weeks, then all of a sudden it refuses to connect to the internet. I am still connected to my wifi network, but the network and sharing centre shows the connection as dropped between the hub and the internet. Troubleshooter offers no answers. I know other Windows7 users have experienced this and so I have ALREADY done the following: Tried accessing the internet in safe mode with networking. This works, so it is not a hardware issue. I can definitely access this web in this way. Rebooting my wireless router etc. I know this is not the issue though, as other devices such as my iPhone can still access the web through it (and the XPS, in safe mode)
I have an Acer Aspire 5532 Windows 7 64bit Home Premium and I have been recently encountering problems. My computer loads up perfectly fine but when i click on an icon the load up circle starts and then it stops loading in 2 seconds. I patiently wait but it just doesnt start and my computer freezes afterwards so i have to turn my computer off the unsafe way. I cleaned up my disk, unchecked unneccesary startup items in msconfig, checked registries for errors, defragmented my disk, use an antivirus, use malware bites, troubleshooting, ms config and none of it seems to resolve my problem. The only way i can open up programs is if I use safe mode and safe mode with networking.
i cant start my laptop in normal mode. when i start in normal ,mode i stuck in black screen only the mouse pointer is appear, when i wait it reboot again but still i get stuck in black screen
1st time poster, I have a HP 425 laptop, windows 7 professional.The laptop works fine in Safe Mode but in normal mode it works for few minutes and then goes blank. There is power and nothing works (the wireless button stops responding)I have changed the system board/motherboard, did a complete reinstallation, ran HP hardware test and memory test that comes with the laptop. I hooked the laptop to and external display and the display is blank as well. I logon in Safe mode and used msconfig and stopped th
I have recently noticed the last couple of weeks that my computer is running slower than normal. In the last week. I noticed my anti-virus software from Norton is no longer working. When I tried to delete the file to re-download it the program would not delete from my computer. I tried to just update it from the internet the "Run; Save;Cancel menu appeared and when I clicked run nothing happened. I tried this function in safe mode with the same result.
Now my problem is affecting other programs like Microsoft and the shortcuts on my desktop. I have tried downloading the AVG anti virus I ran into the same problem. I am lost for options since it is not letting me run any programs on my computer. I can download programs just fine but thats it. I can use the internet just fine but I try to stay away from that since it leaves me open for more viruses. I need to know of other options that I can try.
I have a Sony Vaio with Windows 7 installed on it. Recently, my computer was attacked by a virus. As soon as I noticed, I turned off the computer manually, and booted back up in safe mode. I ran Avast, Ad-Aware and Malwarebytes Anti-Malware. All 3 found a couple of threats, which I deleted. I tried restarting my computer, and then running these 3 again in safe mode (with network). I did it as long as threats were found. Once the computer felt safe, I tried booting in normal mode.
Here's the problem : I get to the "Welcome" page, and then everything goes black but my cursor. What's strange about the problem : For some reason, I did succeed to get it to open normally 2 or 3 times, but every single time it would be crazy laggy. Internet Explorer wouldn't work either. It freezes as soon as I try to access anything. And now it's back to a black screen after the "Welcome" page when I try booting in normal mode. Only my cursor appears (I can move the cursor). Safe Mode works just fine too, only Normal mode has a problem.
charger wire has loose wiring showing and if the black wire touches the red wire the computer completely shuts off, and when you turn it back on you have to go through the whole re-start process and lose unsaved documents. Plus when you run it in the normal mode it takes forever to load anything, and a little window keeps popping up saying "microsoft windows is not responding." but when I run it in safe mode, it works fine. what's wrong here?My theory is that the charget has been short cerciting (i know i spelled it wrong, forgive me) so much that it's been causing damage to the motherboard,
