Windows 7 Refusing To Boot In Normal Mode
Jul 7, 2012
I have a Sony Vaio with Windows 7 installed on it. Recently, my computer was attacked by a virus. As soon as I noticed, I turned off the computer manually, and booted back up in safe mode. I ran Avast, Ad-Aware and Malwarebytes Anti-Malware. All 3 found a couple of threats, which I deleted. I tried restarting my computer, and then running these 3 again in safe mode (with network). I did it as long as threats were found. Once the computer felt safe, I tried booting in normal mode.
Here's the problem : I get to the "Welcome" page, and then everything goes black but my cursor. What's strange about the problem : For some reason, I did succeed to get it to open normally 2 or 3 times, but every single time it would be crazy laggy. Internet Explorer wouldn't work either. It freezes as soon as I try to access anything. And now it's back to a black screen after the "Welcome" page when I try booting in normal mode. Only my cursor appears (I can move the cursor). Safe Mode works just fine too, only Normal mode has a problem.
View 1 Replies
ADVERTISEMENT
Oct 5, 2012
I can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.
View 7 Replies
View Related
May 24, 2012
I seem to be having quite the problem on a computer of mine. After recently installing the directx sdk I am unable to logon through normal or safe mode. When I try to boot up normally, I log in but then the monitors go black but everything else seems to run. Pressing ctrl alt delete works and brings up the screen again but if I try to select task manager for example the screen goes black again. When I boot up through safe mode the computer restarts seconds after loading the windows logon screen.
View 2 Replies
View Related
Mar 27, 2012
Win 7 Normal Mode won't start, will go past Starting up Screen and just hit a Black screen and will hit a Crash Dump (blue error screen)..... I can boot into safe mode fine and I have fun CHKSDK and after a reboot it fixed a few problems but I hit the same Crash Dump Screen. I have also made sure my whole pc is all clean and connected, no corroding parts etc etc, made sure my pci-e slot is default etc etc, no luck at all...Its a new installation and worked fine last night and early this morning after separate boots. But as soon as I booted this afternoon it wouldn't load and would hit the blue error crash dump screen..
View 5 Replies
View Related
Dec 18, 2011
I am working with an emachine with windows 7 home premium installed. Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, 64 bit Processor: AMD Athlon(tm) II X2 250u Processor, AMD64 Family 16 Model 6 Stepping 2 Processor Count: 2 RAM: 3839 Mb Graphics Card: NVIDIA GeForce 6150SE nForce 430, 256 Mb Hard Drives: C: Total - 703013 MB, Free - 637698 MB; Motherboard: eMachines, MCP61PM-GM Antivirus: None Was given machine with infections, tried to fix viruses with HDD installed but could not boot normal, only safe mode.Removed HDD and slaved to working system and ran virus scan. cleared 18 viruses, ran a second scan on drive and it came back clean (used norton antivirus)Loaded the HDD back into the machine and still can only boot into safe mode. Searched forums and saw similar issue and followed instructions listed below:Open Regedit.exe Navigate to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBoot Delete the subkey folder called OPTION Navigate to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerEnvironment Delete the value called SAFEBOOT_OPTION Reboot and done The problem is, there is no option subkey under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBoot I did delete the SAFEBOOT_OPTION under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerEnvironment and restarted. It booted in safemode and when I checked regedit again. the SAFEBOOT_OPTION under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerEnvironment was back and shows Minimal under it. I changed it to normal and restarted and it changes back to minimal after booting to safemode again.
View 2 Replies
View Related
Dec 10, 2012
I've just ran a full system restore on my niece's Dell Inspiron N5030 which runs Windows 7. After the restore the laptop restarted and went into the setup screen... then it tells me it's unable to continue the setup whilst in safe mode and asks me to restart...thus the loop continues.how to start in normal mode and continue the setup?I've tried going to the black boot screen which has a variety of options including "Start Windows Normally" but none of these worked.
View 10 Replies
View Related
May 25, 2011
I have win7 on C drive and WinXPsp3 on D drive. Drives are separate. You can see full specs below.
I boot into XP on D fine. I can also boot into Win7 on C fine, but here is the catch. The computer wants to go into a chkdsk if I boot into win7. If I let the computer do this it goes through a very long process and when it comes out of that process it reboots and goes through its normal procedure.
But then when it gets to the very last step, the step where it shows the wallpaper, icons and taskbar, all I get is blank screen.
If I boot into safe mode I can see everything. If I boot into safemode with networking I can see everything. As a matter of fact that is how I am typing this message now.
What do I need to do to get my computer to boot correctly?
Here are my specs:
Desktop:
Drive C: W7 Home Premium 80GB NTFS (IDE)
Drive D: WinXP Pro sp2 80GB NTFS (IDE)
[Code].....
View 5 Replies
View Related
Apr 11, 2012
When I turn it on, it loads the compaq screen, then says "windows is loading files". It then attempts to take me to the startup repair screen, but cannot load the startup repair options and just stays at a blue screen (NOT the blue screen of death).
I am unable to start the computer in safe mode as it gets to the same screen and does the same thing.
I have accessed the boot options screen and loaded windows from the disk in an attempt the repair it that way but I can not restore the computer from an earlier point in time and startup repair does nothing but search for problems for hours with no progress.
Im running windows 7 home edition 32bit The computer is a compaq presario CQ42
View 9 Replies
View Related
Oct 8, 2012
I'm in a bit of a jam, and I'm hoping somebody might have a suggestion for me. My computer had been running slowly and freezing a lot, so a few days ago I went through and deleted temporary files, changed it so fewer programs would run at start-up, uninstalled Adaware because I had read that it could conflict with antivirus software, ran a scan in avast, and then restarted. After restarting, the computer got to the blue welcome screen, and then stopped before it finished loading. Since then, I've only been able to boot in safe mode.I thought I might have a virus, so I ran some scans over the weekend at the advice of somebody on a different website's forums, but I haven't gotten anywhere.
View 3 Replies
View Related
Mar 11, 2012
my computer will not boot up normally or in the safet mode after installing Norton Power Eraser. Performed the following actions:1. Attempted to use System Restore, program will run but failed.2. System Repair also failed.3. Performed the following steps from your Forum Dated Feb 2012 (Computer will not boot after using NortonPower Eraser echnician is OH MYa. Diagnose Blue Screen Error 0x0000007b (0xFFFFFF88009A98E8, 0xFFFFFFFFC000000D, 0x0000000000000000, 0x0000000000000000.Performed a Chkdsk/r from Recovery Environment, no problems detected.Can only boot it up after reseting "/NOEXECUTE=OPTIN" all the time.
View 9 Replies
View Related
Jul 5, 2012
Is it normal for Windows 7 Home Premium to have multiple boot options at the F8 safe mode menu? (I.e. "Enable boot Logging" "Dosable unsigned drivers" etc etc). I thought there were only three boot options: Safe Mode, Safe Mode with Networking, and Safe Mode with command line..... It seems my safe mode prompt has those three plus all the others.
View 2 Replies
View Related
Jul 2, 2012
So I just got back from a 3 day vacation, and when I came back I rebooted my computer only to come back to the "Start Windows Normally/ launch startup repair" naturally I chose startup repair, it froze. Tried starting normally, took me back to the same page. So I tried booting in safe mode, took me to the BSOD that read Bad_pool_header. So then I tried to putting in my windows 7 installation disc to see if I could do a system recover from there, but as soon as I try boot up with the disc it takes me back to the same BSOD. I feel completely stuck as I've tried everything I can think of.
View 1 Replies
View Related
Dec 26, 2012
I reinstalled Windows 7 on my laptop yesterday (a recovery reinstall, not a clean one). The install worked fine, I'm able to boot up and use all my programs again no prob, but when I attempt to go into Safe Mode, it thinks Windows hasn't completed the install. While the message "Setup is starting services" is on the screen, a popup appears saying "Windows cannot complete installation in Safe Mode. To continue installing Windows, restart the computer"I'm thinking there's got to be a simple registry key fix for this but am having a bear of a time finding anything applicable online.I don't have an urgent need to use Safe Mode, btw, just doesn't seem right not having it available should I need to
View 5 Replies
View Related
Oct 20, 2012
I turned on my PC earlier on today and there was a white bars/lines on the screen throughout the bootup process. I'm unable to boot into windows as it hangs and goes into black screen after loading past the windows logo, however I'm able to boot into safe mode but still having the screen filled with white lines. I've tried system restore to no avail. I'm thinking its either the graphics card or the monitor.
AMD FX-8120
Windows 7 32Bit
4GB Ram
AMD HD6870
View 1 Replies
View Related
Aug 1, 2011
the computer I am concerned with is running Windows 7 with IE8, Microsoft Security Essentials and Malwarebytes Anti-Malware. I am currently in Safe Mode with Networking without issue.The owner of the computer says that something happened earlier today while he was online that sounds like some false antivirus popup, but he's unsure. Here are the symptoms in normal mode. Every application, from moving through them to opening and closing them, runs exceptionally slow - one to three minutes to open, at least a minute to open internet pages. I noticed that, when in IE, as the pages are loading the IE page disappears and reappears. I am not very familiar with Windows 7 so I don't know if it is related. The computer seems to be getting slower as the day goes on. CPU usage is very high.So far, I have disabled many startup items that were unnecessary. I ran CCleaner and cleaned up. MBAM was run in both normal and safe mode, full scans, and found nothing. This is also posted in Viruses and Malware, but I'm unsure where it should live.
View 2 Replies
View Related
May 8, 2012
window 7 working on safe mode and unable to choose the another restoration point and it is not loading in normal mode -after installed third party software worked on that for few hours, then after switched off and later it switched on then after this problem started, automatic repair done, nothing is notified
View 1 Replies
View Related
Jan 16, 2013
I am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.
View 1 Replies
View Related
Aug 13, 2012
Windows 7 x64 does not boot into Safe Mode or Safe Mode with command prompt. Normal mode boots perfectly. Are there any suggestions on how to resolve this? I've tried startup repair and attempted fix boot, etc. No affect. The unit is free of infection. I also tried using SFC, but it said everything was fine.
View 6 Replies
View Related
Oct 28, 2012
I have a Laptop HP pavilion Dv4 my graphics card is AMD M880G with ATI Mobility Radeon HD 4200, my processor is AMD Turion(tm) II dual core mobile M500. The thing is i was playing Tropico 4 and i paused it then it began to mix pixels i couldn't see nothing, then i restarted and this is what happens:I cant see nothing, all is mixed up. on safe mode runs well.I played driver san francisco, fallout new vegas before and any of this happened.
View 44 Replies
View Related
Feb 18, 2013
i bought my hp pavilion dv6 laptop in 2010 and the warranty went out on 2011, i turn on my laptop and i only get the quick web. Every time i try to start window it tells me it cant. i can not even get on safe mode. it asks me to repair my computer but every time i click on that i get a blank blue screen (baby blue color). i have tried to go on safe mode it wont let me, i tried to go on safe mode command prompt and it still wont let me,
View 4 Replies
View Related
Feb 7, 2013
This combination of drivers works fine in windows vista 32 bit.. boots up fine and everything. Today I finally got my SSDD for my OS and a copy of Windows 7 64 bit. I installed it fine without error. Then installed my chipset drivers that I downloaded off of Nvidia's website (64 bit, worked fine, rebooted), installed my nvidia display drivers, rebooted.. now whenever I start windows up. I get the flowery blue background windows logo. It just hangs there and never boots. However it will boot fine into safe mode and after I uninstall the display drivers... though my gaming computer is going to be pretty useless if I can't game with it!
Relevant Info
Windows 7 64bit
Asus Striker II Formula (with 15.58 64 bit drivers installed)
2x SLI EVGA Geforce 560 TI 448 Special Edition (with64 bit 310.90 Drivers Installed)
I am going to try installing the motherboard chipset drivers from Asus's website. I believe the version number is 15.43, then try reinstalling the video drivers. However I don't think this is going to make much a difference.
View 4 Replies
View Related
Jun 6, 2012
I was just browsing the Internet, when it abruptly froze, and hasn't been able to boot up since. It goes to the windows logo, but never beyond that, no error message, nothing, it just freezes... I've tried System Restore and Startup Repair many times, no result.
I've also tried doing Check disk on both Command Prompt and Scheduled start up, Command Prompt actually recognizes some incorrect indexes, however, it's read only (and no matter what I do, I can't make it otherwise), so it can't fix them.
If I do it through scheduled start up, it doesn't recognize any problems and freezes when it's at Step 4 round about 11%, I left it for about half an hour, and it didn't change.
I do not have a Windows 7 Install Disk, my PC had it pre installed and it didn't come with any disk, I do, however, have a custom Startup Repair disk.
I've tried looking it up, but as usual, "solutions" found online didn't help. My computer doesn't have "Advanced boot options", which is a "Solution" I found online, all F8 does is give you the option of what device to boot the PC on.
The PC boots fine in Safe Mode, though, which is fine for regular browsing, but of course, I can't run any games, and that's kind of why I bought the PC in the first place...
If it makes any difference, the PC I'm using is a ASUS CM6650 with the 64-bit Windows 7 on it. Also, nothing was installed or downloaded prior to this problem.
View 7 Replies
View Related
Nov 15, 2012
my computer, a Lenovo Idea pad P580 running on Windows 7, is 5 weeks old and yesterday I was using Microsoft Word to edit a document and Word suddenly crashed. So I closed it, but then the cursor started spinning and I could not access anything on my computer so I rebooted and it started up but then just trying to open Microsoft Word caused the cursor to keep spinning again and I could not access anything. So I again rebooted and this time it was spinning from the beginning. So I again rebooted and turned it on in safe mode and everything was fine. Then turned it off and left it off overnight. In the morning I tried to boot in normal mode and it did boot but it was again spinning and I could not access anything. So I again rebooted in safe mode and I can use my computer fine.And also, this is unrelated, but I was wondering if anyone could tell me what I need to do to make the scroll bar stop moving on its own? Every time I scroll down a page it seems to lock the scroll bar and so when I move the cursor away from the scroll bar, the scroll bar still moves and I cannot click any links or anything on that webpage.
View 6 Replies
View Related
Apr 25, 2012
My laptop hangs up/ freeze in normal mode. Now I can only open it on safe mode. I was only copy pasting some files couple days ago when it happened. I have to hold the power button to turn it off. I already tried system restore and reformatted it twice. I'm using HP Pavilion dm4-1160us, windows 7 64-bit.
View 12 Replies
View Related
Nov 25, 2012
I have Windows 7 on Laptop. My mouse stopped responding in the Windows normal mode but functions fine in the Safe mode. I restarted the laptop several times but the problem remains.
View 3 Replies
View Related
Apr 11, 2012
I have a HP Probook 4430s and under device configurations in the F12 options, what does "Numblock on at boot" mean and what does it do. I'm still having troubles booting up.I can start up in safe mode and w/networking and have been trying to figure out how why it dosn't want to work right. When I'm in safe mode everything works fine but when i shut down and try to power back up i can only do it in one of the safe modes, also it takes a really long time to even do that.So I was just wondering what Numblock on at boot ment and what it does.
View 3 Replies
View Related
Jun 1, 2012
I am using windows 7 32 bit on my computer. while booting my computer initial windows 7 logo appears with keyboard num lock lit; but after the logo stuff; the user choice screen should have appeared but; the num lock key goes off and doesn't re light and black screen appears. But it works fine with safe mode and safe mode with networking?? What could be the problem??
View 1 Replies
View Related
Aug 30, 2011
1st time poster, I have a HP 425 laptop, windows 7 professional.The laptop works fine in Safe Mode but in normal mode it works for few minutes and then goes blank. There is power and nothing works (the wireless button stops responding)I have changed the system board/motherboard, did a complete reinstallation, ran HP hardware test and memory test that comes with the laptop. I hooked the laptop to and external display and the display is blank as well. I logon in Safe mode and used msconfig and stopped th
View 12 Replies
View Related
Dec 16, 2011
Yesterday, I added malware bytes protection and also last night installed avg 2012. Ran scans, everything was moving faster. Shut down last night...and this morning windows will not come on in normal or safe mode. When try to start in safe mode it says STOP: c0000135 program cannot start %hs is missing. On another post with similar code it had a link to put on usb drive and to put in infected laptop and restart with f8. When I did that it said no bootable partition in table. When usb is not in it just goes back to stop message. I have a dell inspiron core i3 (I don't know if that matters). I have tried running restore to previous time and it did not work. when i click on repair it goes to the launch window or start in safe mode option?
View 2 Replies
View Related
Dec 16, 2011
Combo fix was run a couple times. It said not sure where download came from (was trying to get rid of security tool virus that was redirecting websites occasionally). But said It didn't remember any messages coming up, restarted. Everything was fine, installed malware bytes constant protection. Later that night I installed free avg 2012 and ran scans everything good. Computer ran great. Shut down at night. In morning windows would not load in regular or safe mode. When try to repair it goes to launch windows repair or start windows normally screen. When hit launch repair it goes back to that screen. If you start in safe mode it says that it is loading windows files then blue screen appears with "Stop: c0000135 program can not load %hs is missing."
View 1 Replies
View Related
Dec 8, 2012
how do I restart my laptop pc windows 7 in normal mode now that it is stuck in safe mode? Putting this in the top of page did nothing Start > MSConfig > Boot > Uncheck Safe Boot > Restart.
View 1 Replies
View Related
