Cant Access Internet In Normal Mode
Aug 21, 2012
I recently bought a new Dell XPS Ultrabook 13 with i7 processor. It worked fine for about three weeks, then all of a sudden it refuses to connect to the internet. I am still connected to my wifi network, but the network and sharing centre shows the connection as dropped between the hub and the internet. Troubleshooter offers no answers. I know other Windows7 users have experienced this and so I have ALREADY done the following: Tried accessing the internet in safe mode with networking. This works, so it is not a hardware issue. I can definitely access this web in this way. Rebooting my wireless router etc. I know this is not the issue though, as other devices such as my iPhone can still access the web through it (and the XPS, in safe mode)
View 5 Replies
ADVERTISEMENT
Nov 15, 2012
my computer, a Lenovo Idea pad P580 running on Windows 7, is 5 weeks old and yesterday I was using Microsoft Word to edit a document and Word suddenly crashed. So I closed it, but then the cursor started spinning and I could not access anything on my computer so I rebooted and it started up but then just trying to open Microsoft Word caused the cursor to keep spinning again and I could not access anything. So I again rebooted and this time it was spinning from the beginning. So I again rebooted and turned it on in safe mode and everything was fine. Then turned it off and left it off overnight. In the morning I tried to boot in normal mode and it did boot but it was again spinning and I could not access anything. So I again rebooted in safe mode and I can use my computer fine.And also, this is unrelated, but I was wondering if anyone could tell me what I need to do to make the scroll bar stop moving on its own? Every time I scroll down a page it seems to lock the scroll bar and so when I move the cursor away from the scroll bar, the scroll bar still moves and I cannot click any links or anything on that webpage.
View 6 Replies
View Related
Nov 26, 2011
Got an internet connection but IE9 won't work in anything but safe mode since big windows update, ols system restore point before update have gone.
View 1 Replies
View Related
Jul 26, 2011
I am having a serious problem whenever I try and load windows it freezes at the main page. I can, however, access internet easily in safe mode.
View 2 Replies
View Related
Aug 1, 2011
the computer I am concerned with is running Windows 7 with IE8, Microsoft Security Essentials and Malwarebytes Anti-Malware. I am currently in Safe Mode with Networking without issue.The owner of the computer says that something happened earlier today while he was online that sounds like some false antivirus popup, but he's unsure. Here are the symptoms in normal mode. Every application, from moving through them to opening and closing them, runs exceptionally slow - one to three minutes to open, at least a minute to open internet pages. I noticed that, when in IE, as the pages are loading the IE page disappears and reappears. I am not very familiar with Windows 7 so I don't know if it is related. The computer seems to be getting slower as the day goes on. CPU usage is very high.So far, I have disabled many startup items that were unnecessary. I ran CCleaner and cleaned up. MBAM was run in both normal and safe mode, full scans, and found nothing. This is also posted in Viruses and Malware, but I'm unsure where it should live.
View 2 Replies
View Related
May 8, 2012
window 7 working on safe mode and unable to choose the another restoration point and it is not loading in normal mode -after installed third party software worked on that for few hours, then after switched off and later it switched on then after this problem started, automatic repair done, nothing is notified
View 1 Replies
View Related
Jan 16, 2013
I am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.
View 1 Replies
View Related
Apr 25, 2012
My laptop hangs up/ freeze in normal mode. Now I can only open it on safe mode. I was only copy pasting some files couple days ago when it happened. I have to hold the power button to turn it off. I already tried system restore and reformatted it twice. I'm using HP Pavilion dm4-1160us, windows 7 64-bit.
View 12 Replies
View Related
Oct 5, 2012
I can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.
View 7 Replies
View Related
Aug 13, 2012
Windows 7 x64 does not boot into Safe Mode or Safe Mode with command prompt. Normal mode boots perfectly. Are there any suggestions on how to resolve this? I've tried startup repair and attempted fix boot, etc. No affect. The unit is free of infection. I also tried using SFC, but it said everything was fine.
View 6 Replies
View Related
May 24, 2012
I seem to be having quite the problem on a computer of mine. After recently installing the directx sdk I am unable to logon through normal or safe mode. When I try to boot up normally, I log in but then the monitors go black but everything else seems to run. Pressing ctrl alt delete works and brings up the screen again but if I try to select task manager for example the screen goes black again. When I boot up through safe mode the computer restarts seconds after loading the windows logon screen.
View 2 Replies
View Related
Oct 28, 2012
I have a Laptop HP pavilion Dv4 my graphics card is AMD M880G with ATI Mobility Radeon HD 4200, my processor is AMD Turion(tm) II dual core mobile M500. The thing is i was playing Tropico 4 and i paused it then it began to mix pixels i couldn't see nothing, then i restarted and this is what happens:I cant see nothing, all is mixed up. on safe mode runs well.I played driver san francisco, fallout new vegas before and any of this happened.
View 44 Replies
View Related
Nov 25, 2012
I have Windows 7 on Laptop. My mouse stopped responding in the Windows normal mode but functions fine in the Safe mode. I restarted the laptop several times but the problem remains.
View 3 Replies
View Related
Feb 18, 2013
i bought my hp pavilion dv6 laptop in 2010 and the warranty went out on 2011, i turn on my laptop and i only get the quick web. Every time i try to start window it tells me it cant. i can not even get on safe mode. it asks me to repair my computer but every time i click on that i get a blank blue screen (baby blue color). i have tried to go on safe mode it wont let me, i tried to go on safe mode command prompt and it still wont let me,
View 4 Replies
View Related
Apr 11, 2012
I have a HP Probook 4430s and under device configurations in the F12 options, what does "Numblock on at boot" mean and what does it do. I'm still having troubles booting up.I can start up in safe mode and w/networking and have been trying to figure out how why it dosn't want to work right. When I'm in safe mode everything works fine but when i shut down and try to power back up i can only do it in one of the safe modes, also it takes a really long time to even do that.So I was just wondering what Numblock on at boot ment and what it does.
View 3 Replies
View Related
Jun 1, 2012
I am using windows 7 32 bit on my computer. while booting my computer initial windows 7 logo appears with keyboard num lock lit; but after the logo stuff; the user choice screen should have appeared but; the num lock key goes off and doesn't re light and black screen appears. But it works fine with safe mode and safe mode with networking?? What could be the problem??
View 1 Replies
View Related
Feb 8, 2013
in normal mode vga not working
View 1 Replies
View Related
Oct 4, 2011
[code] I never had this issue on Windows Vista, occasionally my internet will randomly dropout. Limited Internet Access". When it does I can do a few things to get it working again:
- Disable, then enable my wireless card and reconnect.
- Uninstall the card, then re-install and reconnect.
- Disconnect from the internet myself and reconnect.
Either way it gets super frustrating. There is 1 other computer plugged directly into the router that does not experience any issues. In addition, I have 1 laptop (windows 7) that works great and 1 laptop (Windows XP) which works great.
View 1 Replies
View Related
Aug 6, 2011
I'm having some trouble starting Windows. First I was having trouble with booting into safe mode so I done some Googling and I found this page and tried it [URL] now not only can I not start my PC in safemode but not in normal mode either, with checking the option for safe mode in msconfig it now keeps trying to start my PC in safe mode over and over again. I also cannot start my PC with the last known configuration.
I tried repair my PC with my DVD but that cannot fix it. There is no system restore point or recovery saved.
View 5 Replies
View Related
Oct 8, 2012
I'm in a bit of a jam, and I'm hoping somebody might have a suggestion for me. My computer had been running slowly and freezing a lot, so a few days ago I went through and deleted temporary files, changed it so fewer programs would run at start-up, uninstalled Adaware because I had read that it could conflict with antivirus software, ran a scan in avast, and then restarted. After restarting, the computer got to the blue welcome screen, and then stopped before it finished loading. Since then, I've only been able to boot in safe mode.I thought I might have a virus, so I ran some scans over the weekend at the advice of somebody on a different website's forums, but I haven't gotten anywhere.
View 3 Replies
View Related
Dec 17, 2011
I had this machine built just over a year ago, and only had occasional crashes (no particular activities seemed to generate the issue). About 2 months ago the crashes became more persistent, and upon restarting the machine would have trouble loading normal mode. At the screen that reads "welcome" the spinning wheel would simply freeze, and the computer would lock up. As this problem persisted the computer would either automatically reboot itself each time, or crash into a BSOD and run a dump. I can, however, start it in Safe Mode without issue. It had been running the same install of windows 7 ultimate x64 until a couple of weeks ago when I attempted to reinstall. This solved nothing, so I reinstalled again, this time deleting the partitions and formatting the drive. Again, the problems persist. I'm inclined to think they're hardware related at this point, but I'm in no way an expert.
View 6 Replies
View Related
Sep 13, 2012
I have an Acer Aspire 5532 Windows 7 64bit Home Premium and I have been recently encountering problems. My computer loads up perfectly fine but when i click on an icon the load up circle starts and then it stops loading in 2 seconds. I patiently wait but it just doesnt start and my computer freezes afterwards so i have to turn my computer off the unsafe way. I cleaned up my disk, unchecked unneccesary startup items in msconfig, checked registries for errors, defragmented my disk, use an antivirus, use malware bites, troubleshooting, ms config and none of it seems to resolve my problem. The only way i can open up programs is if I use safe mode and safe mode with networking.
View 2 Replies
View Related
Feb 16, 2013
i cant start my laptop in normal mode. when i start in normal ,mode i stuck in black screen only the mouse pointer is appear, when i wait it reboot again but still i get stuck in black screen
View 1 Replies
View Related
Aug 30, 2011
1st time poster, I have a HP 425 laptop, windows 7 professional.The laptop works fine in Safe Mode but in normal mode it works for few minutes and then goes blank. There is power and nothing works (the wireless button stops responding)I have changed the system board/motherboard, did a complete reinstallation, ran HP hardware test and memory test that comes with the laptop. I hooked the laptop to and external display and the display is blank as well. I logon in Safe mode and used msconfig and stopped th
View 12 Replies
View Related
Mar 19, 2012
I have recently noticed the last couple of weeks that my computer is running slower than normal. In the last week. I noticed my anti-virus software from Norton is no longer working. When I tried to delete the file to re-download it the program would not delete from my computer. I tried to just update it from the internet the "Run; Save;Cancel menu appeared and when I clicked run nothing happened. I tried this function in safe mode with the same result.
Now my problem is affecting other programs like Microsoft and the shortcuts on my desktop. I have tried downloading the AVG anti virus I ran into the same problem. I am lost for options since it is not letting me run any programs on my computer. I can download programs just fine but thats it. I can use the internet just fine but I try to stay away from that since it leaves me open for more viruses. I need to know of other options that I can try.
View 6 Replies
View Related
Jul 7, 2012
I have a Sony Vaio with Windows 7 installed on it. Recently, my computer was attacked by a virus. As soon as I noticed, I turned off the computer manually, and booted back up in safe mode. I ran Avast, Ad-Aware and Malwarebytes Anti-Malware. All 3 found a couple of threats, which I deleted. I tried restarting my computer, and then running these 3 again in safe mode (with network). I did it as long as threats were found. Once the computer felt safe, I tried booting in normal mode.
Here's the problem : I get to the "Welcome" page, and then everything goes black but my cursor. What's strange about the problem : For some reason, I did succeed to get it to open normally 2 or 3 times, but every single time it would be crazy laggy. Internet Explorer wouldn't work either. It freezes as soon as I try to access anything. And now it's back to a black screen after the "Welcome" page when I try booting in normal mode. Only my cursor appears (I can move the cursor). Safe Mode works just fine too, only Normal mode has a problem.
View 1 Replies
View Related
Aug 19, 2012
charger wire has loose wiring showing and if the black wire touches the red wire the computer completely shuts off, and when you turn it back on you have to go through the whole re-start process and lose unsaved documents. Plus when you run it in the normal mode it takes forever to load anything, and a little window keeps popping up saying "microsoft windows is not responding." but when I run it in safe mode, it works fine. what's wrong here?My theory is that the charget has been short cerciting (i know i spelled it wrong, forgive me) so much that it's been causing damage to the motherboard,
View 2 Replies
View Related
Dec 16, 2011
Yesterday, I added malware bytes protection and also last night installed avg 2012. Ran scans, everything was moving faster. Shut down last night...and this morning windows will not come on in normal or safe mode. When try to start in safe mode it says STOP: c0000135 program cannot start %hs is missing. On another post with similar code it had a link to put on usb drive and to put in infected laptop and restart with f8. When I did that it said no bootable partition in table. When usb is not in it just goes back to stop message. I have a dell inspiron core i3 (I don't know if that matters). I have tried running restore to previous time and it did not work. when i click on repair it goes to the launch window or start in safe mode option?
View 2 Replies
View Related
Dec 16, 2011
Combo fix was run a couple times. It said not sure where download came from (was trying to get rid of security tool virus that was redirecting websites occasionally). But said It didn't remember any messages coming up, restarted. Everything was fine, installed malware bytes constant protection. Later that night I installed free avg 2012 and ran scans everything good. Computer ran great. Shut down at night. In morning windows would not load in regular or safe mode. When try to repair it goes to launch windows repair or start windows normally screen. When hit launch repair it goes back to that screen. If you start in safe mode it says that it is loading windows files then blue screen appears with "Stop: c0000135 program can not load %hs is missing."
View 1 Replies
View Related
Mar 11, 2012
my computer will not boot up normally or in the safet mode after installing Norton Power Eraser. Performed the following actions:1. Attempted to use System Restore, program will run but failed.2. System Repair also failed.3. Performed the following steps from your Forum Dated Feb 2012 (Computer will not boot after using NortonPower Eraser echnician is OH MYa. Diagnose Blue Screen Error 0x0000007b (0xFFFFFF88009A98E8, 0xFFFFFFFFC000000D, 0x0000000000000000, 0x0000000000000000.Performed a Chkdsk/r from Recovery Environment, no problems detected.Can only boot it up after reseting "/NOEXECUTE=OPTIN" all the time.
View 9 Replies
View Related
Mar 27, 2012
Win 7 Normal Mode won't start, will go past Starting up Screen and just hit a Black screen and will hit a Crash Dump (blue error screen)..... I can boot into safe mode fine and I have fun CHKSDK and after a reboot it fixed a few problems but I hit the same Crash Dump Screen. I have also made sure my whole pc is all clean and connected, no corroding parts etc etc, made sure my pci-e slot is default etc etc, no luck at all...Its a new installation and worked fine last night and early this morning after separate boots. But as soon as I booted this afternoon it wouldn't load and would hit the blue error crash dump screen..
View 5 Replies
View Related
