BSOD's On LG T280 Laptop Mainly With 0x0000009F DRIVER_POWER_STATE_FAILURE Then Stopped
Feb 7, 2012
it's a LG T280 laptop,BSOD's started appearing six months ago mainly with 0x0000009F DRIVER_POWER_STATE_FAILURE then stopped and now its kinda stable but started having all sorts of BSOD's, but the system did not create minidump for all of them.
I've been getting random BSODs over the past several months. The latest is the one listed in the thread title, but I've also had the following:
- Kernel_Data_Inpage_Error, 0x0000007A
- Page_Fault_In_Nonpaged_Area, 0x00000050
- A process or thread crucial to system operation has unexpectedly exited, 0x000000F4
Whenever I get one of these, it also gives the additional error "Physical memory dump Failed with status 0xC0000010"I've seen about a dozen BSODs in the past 12 months with these four errors, and I think all of them have been while I had left the computer idle for various amounts of time (never more than a few hours).I built this computer from the ground up with all new components a year ago and have been running Win 7 Ultimate x64, no re-installs.
I got a DRIVER_POWER_STATE_FAILURE error with bug code 0x0000009f. I have changed to a SSD for my main drive (was working on a 500 GB segate before perfectly but wanted an upgrade) with a 750gb wd black as my secondary. Also I get this error only when installing (for first time) or playing GTA-IV. The first BSOD out of the two I got was when I had the install hang up so I tried to quit the process then it hit the blue screen right there. The second one was during game play.
HP Pavilion dv7 4071nr Windows 7 Home Premium (not SP1) Intel Core i7-Q720 ATI Radeon HD 5650 Graphics w/cataylst 12.1 and 8.930.0.0 driver OCZ Agility 3 240GB SSD w/ 2.15 firmware WDC Scorpio Black 750GB storage drive Gskill 2x4GB 1333 Ram Intel Wifi Link 1000BGN w/ 14.3.0.6 driver Realtek PCIe GBE Family Controller w/ 7.50.1123.2011 driver
If you need any more information let me know, this was just an SSD upgrade and I "restored" my Recovery Discs onto the SSD for the operating system.
Attached: VizulizeBSOD.zip(Dump Files and PERFMON Report)I recently (about a week ago) reinstalled Windows 7 Professional 64 bit onto my computer (retail version), as I was not making good usage of my SSD boot drive.As far as I am aware, all of my drivers are fully up-to-date (I used the latest "DriverPack Solution").I am not in my typical environment, and am using a different monitor to what I would be at home (which is HDMI) - though I doubt this will be affecting anything.Everything in the computer except a couple of the hard drives is about a year old.
Recently had a BSOD crash that read Driver_power_state_failure.Blue Screen View locates the problem at:ntoskrnl.exe/ntoskrnl.exe+7cc80. error code: 0x0000009f. Attached is my crash report and the health report.
-Windows 7, x64 - original OS - OEM - age of OS and installation: approx. 9 mos.
i keep getting blue screen errors like the one above, looking at the minidump file using BlueScreenView its reporting that ntsokrnl.exe is the cause of the issue but i cannot seem to fix it.ive tried a list of things including reseting my laptop to factory settings and reinstalling windows but am still getting the issue.
Is Windows 7 x86 (32-bit) or x64 ? x64 the original installed OS on the system? No an OEM or full retail version? Full Retail What is the age of system (hardware)? About 2 years, What is the age of OS installation? 1 year and a half?
I've been getting DRIVER_POWER_STATE shutdowns on my comp recently when I leave it running for a day or overnight. I have about 5 dmp files showing the same ntoskrnl.exe.
Lately I have been experiencing a BSOD when I shutdown my laptop. The computer tries to shutdown for about 5-10 minutes before finally blue screening with a RIVER_POWER_STATE_FAILURE error. This problem does not occur every time I shutdown my laptop, but it seems that the longer my computer is on, the more likely it is to blue screen on shutdown. The problem may be caused by driver for either my external monitor, keyboard, or printer, as the BSOD never occurred when I was using my laptop without them attached a few weeks agFrom what I can tell after searching the problem, I likely need to update some driver, but I have no idea which driver(s) are causing the problem. I have included the Minidumps, and I believe all of them are for different occurrences of the same problem
every so often my laptop will blue screen with the error "DRIVER_POWER_STATE_FAILURE".
Alienware M17x R3 Windows 7 x64 OEM 8GB RAM Intel Core i7 @ 2.00 GHz CPU Nvidia GTX 460M graphics card, 1.5 GB memory Entire system is only about 8 months old
I've had a Dell Laptop (l502x) with Windows 7 Premium 64 Bit for almost a year now.It's a great thing, except for one thing: i get about 1 BSOD every 1-2 days.As it happens only once every other day, i almost got used to it, but now it's starting to get on my nerves and I'm wondering what is causing it, as they are totally random.On the Dell support website they told me to try the Windows Debugging Tool, which then showed me it had to do with wwussf64.sys. According to some dubious 'anti-virus' sites on the internet this was linked to some Ericsson software, although i don't have any.Might be interesting to know, when they delivered the laptop in 2011, the backlit keyboard was not working, and they had to replace the keyboard and motherboard twice to get it working.
I am attaching the ZIP file of the dump utility that I ran. My basic system profile is:
System Manufacturer/Model Number Custom Build OS Windows 7 64-bit Professional CPU AMD Phenom 8450 Motherboard Abit AN78GS Memory 8GB Corsair Graphics Card(s) Nvidia GeForce 9800 GT Sound Card Creative SB X-Fi Monitor(s) Displays Samsung and Viewsonic Screen Resolution 1080p & 1240x1026 Hard Drives Maxtor, Western Digital, Toshiba (4 drives total). Total storage is: 2.75TB PSU Kingwin ABT-800MA1S Case Kingwin Cooling normal CPU fan & heatsink Keyboard MS Wireless 6000 v3.0 Mouse Logitech Wireless MXLaser Internet Speed Qwest Fiber Optic 20 / 15 Other Info N/A
This just started happening a few days ago and I can't seem to determine why? I also cannot seem to run the perfmon report as my system won't stay running long enough to generate it and I can't seem to run the report tool from safe mode.
Cumputer - Dell Inspiron N5050 - 410 GB Hard Drive - 4 GB Ram Crashes at college but not at home WiFi Router used at school and home Purchased new this Sept 2012 Driver_Power_State_Failure 0x0000009f
Only purchased software installed was the McAfee that came preloaded. Bought 1 year protection.
Recently got a new computer (about 1 month ago) for our office and we keep getting the following BSOD almost daily:The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa80080d3060, 0xfffff80000b9c3d80xfffffa800994bac0). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 051012-14414-01. tried to analyze the mini dump files myself, but I can't seem to get them to open up.Not sure how to fix this issue and windows troubleshooting is uselessCurrently running: Windows 7 Professional x64 Sp1 OEM
I received the BSOD twice today. I was just surfing the internet, nothing else. I have up to date virus and spyware and do regular scans. Not sure what the problem is. This is from the event log:The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa800a6bc050, 0xfffff8000472f4d8, 0xfffffa8009a53e10 I uploaded the files per the instructions.
I have been experiencing DRIVER_POWER_STATE_FAILURE crashes lately caused by ntoskrnl.exe.I originally thought I would reinstall Windows 7 but that has not fixed the issue I am using OEM Windows 7 Professional x64 The CPU is a i7 2600 The PC is only no more than 2 yrs old.I d have an old Canon scanner LiDE 100 that I expect is causing the problem. The PC was working fine for over a year until NOv 2011 and then started crashing. I reinstallled Windows 7 all seamed to be fine util I loaded the software for the scanner. I have loaded the latest software from the canon site.
Ive had this laptop maybe 1 month it has a 1 year warrany, my issue is it seems to be blue screening non stop, generally when i open games, i was on D3/WOW when it happens the screen goes blue and says windows has experienced an unexpected error blabla.It did stop doing it for about 2 weeks however its doing it again today however now its got a different error saying DRIVERPOWR_STATE_FAILURE when i get the BSOD. i can also hear a fan in the computer maybe the gfx card?THe bug check code was 0x00000116 the first 3 times howevr now its 0x0000009f here is the BSOD from BlueScreenView:
I'm at my wits end.Using the SF diagnostic tool, the only button that didn't pull any info was the minidump. I've changed the setting so it doesn't restart, and to a small size as well. Even after a restart, no info is pulled from the minidump button.Screenshots of cpu-z is also in the zip folder. The ram mon .html file is in as well.
Last night my HP laptop was working just fine with zero issues. Today I turned it on and my keyboard didn't work and also saying that no battery was detected.Now if I turn it on with a power cord attached I can remove the power cord and the laptop stays turned on, I can also shut the lid and the laptop will stay powered on. However if I use the shut down function or turn it off by the power switch it will not power back up without the power cord attached.The keyboard just refuses to work none of the keys work. No fn key no alt key no ctrl key nothing. I can't turn wireless on or off using the F key, however the on-screen keyboard works fine, and so does a keyboard that is plugged in through usb.I have checked the drivers which says it is working properly, I tried uninstalling it and reinstalling, which didn't fix it.I Googled this problem and read that a bios update might fix this, I updated it and nothing as well as doing the usual virus and malware scans with the likes of malwarebytes and MSE.
I was importing CDs today when iTune stopped working. I then closed iTunes and I can not get it open again. I have reloaded iTunes. I am on Windows 7. HP Pavilion. I have seen several posts on Apple Support which have not worked.
My Acer Extensa 5230E stopped charging so I purchased a new charger, thisn didnt work so I installed a new battery. The laptop came on but battery wasn't charging up.
just noticed few day now that there is no sound at all coming from my laptop.and also noticed the heat underneath sometimes its to hot to put hand there for more than a second.that cant be right.so i guessed my fans stopped working. i used a program to check my fan speed and it confirmed what i thought. they have stopped, no idea why though.this is screen shot of the program with the results.
Basically i installed some updates for nvidia to help my devices catch up with my win 7 pro install. Now however i have the issue that my ps/2 keyboard and touch pad mouse has stopped working and i'm having to use USB to actually use my laptop. Has anyone else found a solution to this at all. I have checked device manager and it say code 10 for the mouse not working and code 19 for the keyboard not working.
For background info i have a Dell Studio XPS running 64 bit Win 7 pro.
I have an older Dell Inspiron 5100 that's been rock solid since day one. I recently transferred all my music from my PC to my Seagate FreeAgent GoFlex so I could organize my files while I was out of town on business. When I got to my hotel and plugged the Seagate into the USB port the laptop would not recognize it. There's two USB ports, one of the USB ports does nothing at all when I plug the drive in (not even a 'Ding-Dong' sound). The other port at least responds but still not recognized. By "responds" I mean Windows responds with a "Dunn..." sound; not the happy two tone sound of a device actually being recognized and available, just a "Dunn..."I've used this drive before on this laptop on several occasions so I know it's compatible. I also came home and plugged to drive back into the PC to see if the drive itself responds. It does, and all files are there and happy. Also, when plugged into the non-responsive USB slot the light on the drive blinks a couple times, the platters spool up for 15 or so seconds then goes out. When plugged into the other USB slot (the one that goes "Dunn...") the light comes on and stays on and the platters spin untill I unplug the device. But it's still not recognized.