Assign DHCP And Static IP Of Other Subnet To Same NIC?
Dec 3, 2012
How to setup the Network Internet Controller (NIC) to carry one IP that he receive from the DHCP and one Static IP of another subnet. In Windows XP Professional this was working perfectly with an registry modification.
Code:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesTcpipParametersInterfaces
choose the your NIC here
Code:
IPAddress = put you desired IP address
SubnetMask = put you Mask here I done the same settings in Windows 7 but it does not work.
View 5 Replies
ADVERTISEMENT
Jun 28, 2012
how to assign static ip for access my pc from anywhere
View 1 Replies
View Related
Jul 24, 2012
How would I go about assigning different ip addresses (static) to different programs? Ill give you an example of what I mean. There is a Popular game called Minecraft (I don't know if you have heard it before, but It might help if you do know about this game) but I am planing on hosting multiple minecraft servers on one server (machine). So how do I get more static ip addresses (on one machine) so I can host more than one server on one machine?
since minecraft uses the port : 25565 would I be able to host a website on the same static ip address as a minecraft server since websites use different ports?
View 6 Replies
View Related
Oct 29, 2012
It is randomly changing from a static IP to a DHCP one, Problem is that it's my media server.it also happens for no particular reason, I can reboot 10 times and it'll stay the same, but after a day or two or three even (seems random) it just flops back. i've uninstalled and reinstalled the driver for it and got nothin.
View 1 Replies
View Related
Mar 7, 2011
Is it possible to use DHCP dynamic ip and static ip in one nic at the same time ? Like in xp via regedit ? Is it disabled to use them simultanously in Windows 7, one nic?
Google is full of "alternative config" suggestions, but they aren't what i'm looking for. (since it is for the "if DHCP isn't available" situation)
View 9 Replies
View Related
Sep 13, 2011
I have a machine that connects to a laptop in my Organization. my broblem is that every time i nee to configur static ip.i need to know if there is any way to Configure TCP/IP to use DHCP and a Static IP Address at the Same Time?
View 4 Replies
View Related
Aug 3, 2012
My Windows 7 machine runs in the subnet 192.168.1.x (actual IP 192.168.1.33) and there is a Linux machine with windows share (smb or Samba) on a different subnet 192.168.2.x (actual IP 192.168.2.5). There is a router inbetween of course.Before they were on the same subnet and I could easily see the Linux machine when using Windows Explorer and clicking on Network. Now, I can't see it anymore.
View 1 Replies
View Related
Jun 1, 2011
I have to connect a Windows 7 computer to a Ethernet LAN. (no DHCP!)I know how to do this on XP but am baffled by with Windows 7's new structure. Where exactly do I go to enter the assigned IP address, DNS and subnet mask>Is there a nice step-by-step guide with pics - or is it too simple for that.
View 2 Replies
View Related
Feb 26, 2012
i always have this problem... my ip is always 169.xxx.xxx and i want to manually set up my ip so i wont this problem..
View 4 Replies
View Related
May 10, 2009
My C: and a couple of other partitions come up fine, but some are missing.I go into Disk Management to assign a drive letter to these parititions but I get an error."The operation failed to complete because the Disk Management console view is not up to date. Refresh the view using the Refresh Task. If the problem persists close the Disk Management console, then restart Disk Management, or restart the computer."I've tried refreshing and restarting with no luck.I went into Vista and it shows the same thing, unassigned drives and no luck assigning a letter.
View 9 Replies
View Related
Sep 28, 2011
I like to use keyboard shortcuts to start programs running. I assigned Ctrl+Alt+F to open Firefox (pinned to the Start Menu), but it would not work. I can use Ctrl+Shift+F and the shortcut works. Normally, I would assume that Ctrl+Alt+F conflicts with one already in use, but pressing that key combination, nothing happens. Is there a way to determine what keyboard shortcuts are assigned and which are available?
View 2 Replies
View Related
Apr 16, 2012
Since WinXP I have a problem when I want to re-assign a file extension to another application (=the program which should be used when double clicking on a certain file in WinExplorer).This problem appears particularly when the old, current application is NOT existing any more! [code] So again is there a real easy way/tool of re-assigning file extension to new programs regardless of what crap stuff is currently existing in Registry for that file extension?
View 8 Replies
View Related
Oct 17, 2012
Everytime when i type ip adress to a default gateway and try to save settings, ip address is not remembered. If i reopen ipv4 settings there is only IP address, mask and dns remembered, gateway fields are blank. Also in cmd if i type ipconfig /all, Windows IP Config, and Tunnel settings are shown , ethernet settings are not shown.
I tried with manual reset with netsh int ip reset C: esetlog.txt in cmd, but still the same problem.
View 1 Replies
View Related
Apr 11, 2012
I'm using Microsoft Virtual WiFi Miniport Adapter for ICS across my laptop and phone. But I don't find a way to disable the default DHCP&DNS available with ICS.
I'll runn Dual Server DHCP&DNS () on my own. Which will get me better control over the DHCP leases and all DNS forwarings along with the full log. For this I need to shutdown the default one. It is possible, because Connectify does the same.
View 1 Replies
View Related
Aug 6, 2009
Is there a way to turn the screen off and on with different shortcuts?
For example, have Shift + F7 [☀] turn off the screen but use Shift + F8 [☼] to only power on the screen (because any key or mouse movement can turn the screen back on).
View 0 Replies
View Related
Feb 20, 2011
My windows 7 installation won't assign a drive letter to disc drives and manually trying in the device manager doesn't work either. This is also the same for virtual and external drives, it doesn't assign a letter for either...
I tried the auto fix from Micro$oft but it didn't work: [URL]
790i ftw
QX9650
GTX285x2
6gbRam
dual ssd and raptors
but doesnt run games
View 7 Replies
View Related
Jan 17, 2012
I'm currently developing a new SOE from scratch for the company I currently work for as my first real project I have a few concerns surrounding what should be included and what can actually be achived.When I create the image from PC1 does it copy absolutly everything EG: Computer settings and Product keys? The reason why I ask is if it copies the product key aswell we could be in some serious trouble with the auditors.Branching off from my last question, is there anyway to assign a computer name and issue the pc a domain when the image is loading? Or is this not possible?
View 1 Replies
View Related
Oct 20, 2012
how do i assign a password for my router if its an open network?
View -1 Replies
View Related
Jun 16, 2012
How can i enable dhcp in windows 7
View 2 Replies
View Related
Mar 13, 2012
I had a Mac laptop that MB crashed. I had a 3rd party turn the HD into an external drive for me so that I could access the data from it. However, when trying to hook it up to my Windows 7 pc, it is not showing in Win Explorer. After reading a few posts, a lot of people are recommending reformatting or other options that I'm afraid will destroy the data. The drive is shown in my Disk Management window as "Basic", "Healthy" and "Online", just no Drive letter?
View 4 Replies
View Related
Jun 14, 2012
I was asked by a client to get data off a circa 2004 PC that has a blown Power Supply. I removed the HDD and proceeded with my usual recovery procedure using a drive adapter cable and power supply. The problem is that I can see the drive in the Win7 Disk Manager, but I can't mount the partition. Most of the time I've not had problems with Win7. It usually just recognizes the drive and assigns a letter to the active primary partition. In this case, I can see the partition, it's active and healthy, but I can't assign it a letter. In fact, all options are "greyed out" except "Delete Partition."I've also used MiniTool Partition Wizard, but without success. Partition Wizard can assign a letter to the partition, which then shows up in Windows Explorer. If you click on the drive letter, you get the "J:\ refers to a location that is unavailable ...." I can explore the partition with Partition Wizard, but I'm unable to access the files.
Here are the Hardware particulars:Old HDD: 80GB Maxtor HDD ATA, formatted with 76GB primary partition, Active, NTFS, This was the boot drive for a PC I'm using Win7 x64. The drive is connected to my machine using a SATA/IDE Combo Drive adapter connected to a USB port on my machine. It uses the standard USB to SATA Serial Bridge Driver.
View 2 Replies
View Related
Jul 27, 2011
I have found the methods to uninstall and remove Windows Live Mail, but I want to ensure my Hotmail becomes the default email app.I have tried to assign mail to Hotmail, but the only option is WLM.My problem is clicking an email link and WLM automatically opens. [eventually]I want my Hotmail to open, but have never figured out how.
View 6 Replies
View Related
Jan 12, 2012
When I took over a PC used by my predecessor, he had Win 7 (MS keyboard) set up so that the Windows key to the right of the space bar and Alt key will dump "http://www." into any open text field. This saves me a lot of time on a repetitive task with our software. However, when I asked one of our best developers how I could assign "mailto:" to another key, he had no idea how the existing functionality was set up. Googling "Windows 7 hotkeys" didn't find me any tips. What to do?
View 5 Replies
View Related
Aug 31, 2012
how can I assign permission to change file names to a program? If I want to rename a file manually, I am asked to provide administrator permission, if I want a program to rename files, the access is denied.
View 1 Replies
View Related
Jul 1, 2012
I have a strange networking situation. Let me start by saying this situation is on a Domain, and that I am using Windows 2011 SBS and Windows 7 clients.My server has a DHCP range of 192.x.x.150 to 192.x.x.199 - and all other I.P. addresses are static.On a workstation located at I.P. 192.x.x.13 I am seeing an address conflict.When I perform an "nbtstat -a 192.x.x.13" command from the server I am given the logical computer name of a staff members personal laptop.Investigation of the laptop reveals that it is set to DHCP, and clearly the address of 192.x.x.13 is outside of my servers DHCP scope, so this I.P. should never be assigned, let alone in duplicate.I Googled this topic before posting, and it was suggested that IPv6 could be having an adverse affect. I determined this because I performed a ping on the laptop and only got a MAC address back rather than an I.P. address.
View 1 Replies
View Related
Aug 3, 2012
My network is set to automatically set an IP, and this has worked semi-okay for the past few days. It disconnects a lot but I can usually go to the Command Prompt and then release and renew my IP, which would normally fix it. So I did that today, only that time it said something about being unable to contact the DHCP server. So I then typed in ipconfig /ALL and it said the DHCP isn't enabled. I tried it again just recently, but instead I get a message saying that the RCP server is unavailable, but the ipconfig /ALL prompt still says the DHCP isn't enabled.
View 1 Replies
View Related
Dec 17, 2009
So I recently installed Windows 7 x64, and suddenly my wireless connection is no longer working. It worked fine with the previous Vista 64-bit OS. I'm able to connect to a different router, and the internet works fine. However, I cannot connect to my Home router. Other laptops are able to connect to it just fine (running the Windows 7 OS).
I updated the network adapter drivers, reset the router and modem, don't have the Bonjour service at all, updated everything Microsoft had for me, and tried that spoofing Network Address solution. When I try to ipconfig /renew, it freezes and eventually says "DHCP could not be reached" or something along those lines.
After all this it still doesn't work, and I still get the "169" IP address when I ipconfig.
The router is Linksys WRT54GS. My wireless network adapter is Atheros AR9281.
View 3 Replies
View Related
Jan 8, 2010
My PC is very fast, boot up is fast and when I first installed Windows 7, it used to obtain an IP address almost instantly.....now, after a few weeks use, the machine takes a lot longer to initiliase the networking, once it obtains the IP address, then everything else loads at quick speed and it runs fine.I'm using an ASUS P5Q-E motherboard, with dual Marvell-Yukon Gigabit NICS (although only one is enabled) and a DLINK ADSL modem-router.The router isn't the problem as other PCs connect to the network fine - And I'm sure it's not the network cards as I've downloaded and installed the latest ASUS approved version of the marvell-yukon WIN7 driver.I've experimented with installing / uninstalling the NIC, letting it use standard WIN7 drivers instead, trying a couple of different versions of the NIC driver but all to no avail. It's really annoying, as my PC is very fast normally and this is the only thing causing a slow delay on boot (it takes about 20-30 seconds to initialise DHCP).
View 6 Replies
View Related
Jun 10, 2012
I am having problems connecting my Win7 Sony Vaio to my existing network. I cannot get the Ip address to add it to the DHCP table using ipconfig /all. I can see my connection but not connect to it because of not being able to add it.
View 2 Replies
View Related
Dec 31, 2012
anyway - i just unplugged everything from my system, to install a new graphics card, and at the same time dust around it, tidy up etc. including an external hard disc which is connected full time, and is assigned, or was assigned drive F.as i had an onboard card originally, i had difficulty with the install, so had to reset the bios by removing the battery.everything works fine now, except i have a phantom cd drive in F
it doesn't show in the device manager, and it isn't in disc management either.the biggest poblem is i have an external drive which has 500gig of projects, photos and video, which are all linked to adobe lightroom, premiere and after effects, and now they are all broken links, unless i can assign the drive which has now been assigned to E, back to F where it should be.
View 1 Replies
View Related
Nov 2, 2011
Last week I hit an issue whereby I was unable to access the Internet wirelessly even though my laptop could see the router and had a good signal. I tried connecting up via an ethernet cable to no avail.
The issue seems to have started right after a Windows Update but I can't be 100% certain. If I do ipconfig /all I can see that DHCP is not enabled. I know the router is fine because my vista laptop can access wirelessly via the router fine. I tried doing some things I seen in the forum such as ipconfig /renew etc. but it said it couldn't contact the RPC server. I followed this up and was recommended to check the DHCP client service was started. It isn't even there. I was wondering if the update could have removed it.
Someone else who had reported the same issue on this forum was asked to do a system restore. I did this and the service is still not there. I am assuming that the non-existence of the DHCP client is the cause of my issues accessing the Internet.
View 1 Replies
View Related
