Any Automatic Temp Files Clean-out Process In Windows 7?
Sep 17, 2011
Is there an automatic temp files clean-out process in Windows 7? Every once in a while I noticed that my hard drive is somehow automatically purged of about 30 gigs of data, so all of a sudden I have roughly 30 gigabytes more hard drive space available that the last time. I checked, but I haven't trashed any files.
I'm wondering if there is some kind of automatic temp files clean-out process that Windows 7 goes through at certain times. Or could this be related to an automatic disk defragmentation? My defragmentation is set to run once a week, but I've only seen the 30 gigs or so open up about three or four times in the last year.
And if there is a process by which Windows 7 automatically "cleans house" to open up this much hard drive space, is there a way to do it manually without throwing away any of my normal files?
I am wondering is there a way to have an automatic boot process run?Example: I work and get home at around 5:30-6:00 PM, I would like my PC to boot at 5:00 PM.If there is a way to do it great, if there isnt, no great loss.
I put Windows 7 in a 40gb partition and am trying to install programs to the larger partition. But I noticed free space is still going down on C:. Checking sizes I found a temp folder in usersappdatalocal that is up to 3.6gb. I tried the system clean up but it only listed a few meg in the temp folder. Seems it points to another temp folder which also still had stuff after the "cleanup". Is it safe to delete all that crap in this temp folder?
i clean installed new WINDOWS 7 PROFESSIONAL 32bit on laptop SONY VAIO VGN-FZ11Z.Operating system is genuine but downloaded from MSDN. But it is giving me a lot of process validation errors. Genrally these errors are coming on application launch. After that mostly application aborts or restarts.
I have my tower pc on constant all day- to record a streaming IP Camera from my work.Initially, I saved these files into my docutments- which they would save as .avi files, and after every several days I would delete them as they would take up ALOT of space on my pc.My pc is 250GB in size, and usually it would be about 80GB full before I had the IP Camera. Just recently, I noticed all of the IP Camera avi files seemed to have disappeared from my documents if I went directly to the folder... I could still see them in documents when I was choosing a location to save the recordings.Upon right-clicking the avi files in the latter, the files would be of no size and wouldn't play.Now my computer is 210GB full in the matter of a week.
I have a system with 32gb DDR3-2400, a 256GB SSD and a couple of spinners. I have set up 4gb of the RAM to be used as another RAMdisk using the softperfect software. This problem has been going on for some time, but has been more of a problem since I started using the RAMdisk. Not because the RAMdisk itself isn't working well, because the stuff that is stored there keeps getting reset.I have pretty much identified that when updates are installed through windows update (either from Microsoft update or from my WSUS server), the following are reset to defaults
1. Pagefile is automatically managed and stored on the C: drive and is set to 32gb
2. The TEMP and TMP environment variables are reset to the C:users default location
3. The temporary Internet Files location is reset to the default C:users... location
There may be others that I have not discovered.I have manually set my swap file to 1024/2048 on the D: drive (a spinner), on the belief that it should rarely if ever be needed with a system equipped with 32GB of RAM. I'm certainly not inclined to waste 32GB of space on my SSD for an unused object.I have placed the TMP/TEMP files, cookies and Temporary Internet files on the RAMdisk to squeeze a little extra performance out of the system. (Yes, I know, I'm not really getting much benefit).Photoshop and a few other programs also use the RAMdisk as a scratch disk, and were the main reason I set it up in the first place.This is becoming a real pain when it gets reset as I have to manually change everything again. Anyone know a way to make windows leave settings at what I set them, instead of having it continually reset the values to what it wants? I'd prefer to have it my way. I know there will be proponents of "leave things as windows wants it".
I think its a serious problem, but something is writing huge files into my WindowsTemp folder TMP0000000789F2D108048D0CAD is an example of a filename. Its roughly around 4 gigs. The problem is causing my netbook to be very slow and I suppose it harms the HD as well.It writes until space free is very little. Goes away after a long time and does cleanup again. But is very annoying.
Windows 7: ComputerLocal Disk C:WindowsTemp Folder Have a series of SQM extension files fwtsqmfile00.sqm to fwtsqmfile19.sqm
Some have mentioned that these files are associated with Windows Live or Windows Messenger. I have entered Windows Live or Windows Messenger in Start (Search programs & files) & have not found them. I have looked under Turn Windows Features On & Off. Still have not found Windows Messenger.
I'm looking for advise on what steps I can perform on one of my computers, in order to properly consolidate and move all my ( temp, cache, etc. ) files onto a faster drive I just recently installed.
I recently ran across a couple of 74Gb Western Digital Raptor drives (WD740) in my garage and wanted to integrate one of them into my computer that I use to store my DVD backups on (etc), with the hopes of increasing system performance without having to perform a complete system reinstall.
Also money is a concern; or else I would just get a Solid State Drive.
This computer is running 64bit Win 7 Home Premium I have 8Gb ram installed. The Raptor is formatted and assigned drive letter (Z:).
what are .sqm files in temp folder? Files are named like this: fwtsqmfile00.sqm, fwtsqmfile01.sqm and so on. Files began to appear after re-installing Windows. And it seems that the files will show up when i turn off the computer.
How to set up automatic deleting files from specific folders. I know there is a 3rd party software, but was wondering if I can do it directly thru Windows 7 options?
I am using Windows 7, My desk top computers has three hard drives, the "C" with just the programmers and other system files, the other two hard drives (all SATA) are used with my main files (E & F) . Drives E & F are set as "Shared drives " I often update files between my Toshiba laptop (also using Windows7) and vice versa. I have a hard wired network connection between these two computers. Now my question why are so many temp files being added to my shared hard drives, I have only noticed this recently, I certainly did not get these when I had an XP Pro set-up, and between four computers. Is this problem associated with me allowing shared use between computers? I am also running office 2010 on both these computers. My emails are using outlook and IMAP, both computers emails systems are always synchronized, I think this is a feature of MS Office 2010, and is very helpful.
What happens if I delete these temp files? I am enclosing a copy of the temp files on my "e" drive so you can see.
I'm running Windows 7 and IE 9. In the default temp folder (tools>internet options>General Tab, Browsing History, settings>view files), I can see a number of cached fies, but not all the jpgs. On my XP machine with IE 8, after I visit the same website as on my Windows 7 machine and follow the same steps as explained above, I can see all the jpgs. The Internet Option settings are the same on both machines. Why can't I see all the same files on the Windows 7 machine?
My temporary folder has been have batch files created in it every 15 seconds or so. My mouse is the arrow with the busy circle at 2'oclock of it constantly, so something is running. I checked my processes and they seemed to all be normal. I updated everything including windows.net 4 so I don't know what else to try.
It is Windows 7 64bit Home i3 Processor w/ 4gb RAM
And the batch files all have been 6 digits numbers increasing in numbers so it would be like 178521 and the next one would be 178762 etc. There are two conhost.exe running.
I'm trying to optimize performace of my SSDs.Can I move Pagefile, TEMP and TMP files to my Ramdisk? I already moved interenet cache.I have 32GB of memory available and an 8GB ramdisk. Memory allocated to ramdisk is dynamically managed by software (Primo Ramdisk Ultimate) so only the used portion is used and not the full 8GB.
I transferred photos, through Bluetooth, from my Blackberry to my laptop that is running Windows 7. They appeared in a Temp file (under Local) but have since disappeared. Is there a way to retrieve them? Does this mean I have something on my computer that automatically deletes these files?
I have a lot of directories that need to be transported via USB drive later (the files/folders vary each time). I want the files to remain in their original location, but have some kind of folder or structure where I can group the folders so that when I need to copy them, it is a simple matter of selecting one folder and copying it to the USB drive. I don't want to create duplicates of files or folders. Basically, I want some kind of folder or holding area that will have pointers to the folders/files I need to copy. Can I do this in Windows 7? I had was to use Libraries. That would kind of work, but it isn't drag and drop and is more awkward to add folders to.I know at the beginning of the week which folders I will need for that week, so I want to set it up in advance sow hen it is time to do the copy, it is easy.I know I could setup a simple batch file (with XCOPYs) , but was hoping for a better solution where I could browse the files before I copy them, etc.
Recently I've noticed that some '.tmp' files have been created in default 'Downloads' folder of Win7 which is located at 'C:UsersUSERNAMEDownloads'. Here's a pic:
I don't use the default downloads folder for storing my downloads and I have configured all my browsers to save files to another location. But since last month, I noticed these small ".tmp" files being created in default downloads folder. I've been using Win7 Ultimate for almost 3 years now and I've never encountered this before. Or is there any way that I can see what program has created these temp files.
BTW, I use multiple browsers, Firefox, Chrome, Opera and sometimes IE8. I'm pretty sure it's not IE8 and Firefox coz I've been using them for a long time and they've never created temp file in 'Downloads' folder. I've recently installed Chrome and Opera and right now Chrome is my default browser. I went and cleared all my browsers' cache files using their own method withing the browser, but they are still there. Really annoying. I know I just can delete them, but I want to know which program has created them.
I am attempting to place a backup of my documents and outlook files to my domain server. I do this every Friday.
Everything was fine in Windows XP, we would just copy the documents folder and overwrite the one on the server. This has become a problem in windows 7.
When attempting to copy, I get access denied, I have to constantly choose to overwrite files, or it just doesn't work at all.
Is there a better method to drop my files on the server? I want access to them without having to use a utility.
I have this problem with Asus p5q3 motherboard my system temp goes up to 60-70(celsius) and cpu (intel core 2 quad q9550) temp is low as 30-40(celsius). So how can system temp be that high?
Was there ever any kind of resolve for Forced Automatic Refresh & Sorting of files and folders in Windows 7 (I'm not talking about Auto Arrange and I need that like it is)
It's when you copy/paste files into a folder and they instantly disperse and sort themsleves upward within the list of files, instead of staying at the bottom of the list Waiting until a refresh/close action to then find their place.
I am trading drafts of a document with a friend by gmail. When I download the Word document, it is automatically saved as a doc.x, and the formatting is messed up. Also, when I attach the revised document to an email to send back, the Word document is automaticalled attached as a doc.x. How can I disable this?
Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Home Premium , 64 bit Processor: AMD Athlon(tm) Processor TF-36, AMD64 Family 15 Model 124 Stepping 2 Processor Count: 1 RAM: 1788 Mb Graphics Card: ATI Radeon HD 3200 Graphics , 256 Mb Hard Drives: C: Total - 140232 MB, Free - 106289 MB; Motherboard: eMachines , eMachines E627 , V1.10, LXN65020700123419E1601 Antivirus: Microsoft Security Essentials, Updated and Enabled
I use FL Studio alot, here lately, after I covert an FL file to wave or mp3, then go to delete the file, it gets stuck in a calculating process. No other file types do this but mp3's and waves.
I have a brand new install of Win 7, after which I tried to install a LINKSYS Wireless USB Adapter (WUSB300N) and during the copy files installation process I get ACCESS IS DENIED.and the process stops. I only have one id defined and it of course has admin authority, so I don't know what is wrong.
I am running windows 7 professional on a 1tb HDD. I recently got a new 120gb ssd, and it is very fast! However, I am trying to figure out how I would migrate just my critical OS files over to the SSD without doing a clean install of Windows 7. Any working programs or workarounds to do this? (Without Data Loss).
I've just done a clean install on a blank hard drive of windows 7 ultimate x64. I had this exact version of windows on another hard drive but I did something and now I can't boot into it any more. So I want to transfer all my files and stuff - I can link up and view everything on my old hard drive, it just won't boot - is there any software or any easy way to transfer my program files so that I don't have to reinstall them all? Also, I'm not sure how to transfer all my windows settings - is it just a file somewhere that I copy across? I've had a look at 'windows easy transfer' but it looks like it only works if you can boot into both operating systems - which I can't.
When I try to do a clean install of Windows 7 I get the loading files white progress bar you normally get during an installation, it then goes directly to the scrolling progress bar that would normally appear before a Windows startup, and then goes to a blank Windows 7 desktop with only a cursor (that I can move).I have a computer with the following specs:[CODE]I have tried to install with every version I can get my hands on, both 32 and 64 bit. None of them are upgrade versions. I've tried installing on a fresh WD Raptor and an Intel G25 SSD. All other drives have been disconnected. I've moved my memory around and tried with one stick. My mainboard has the latest official BIOS, although there is a new beta.
I ran the Windows 7 compatibility test and didn't see anything that would cause this problem.I have searched the internet and have not been able to find a solution sonstalling Windows XP has never been a problem, just Windows 7, always with the same problem.This is one of the few times when I have not been able to look around a find an existing answer to a problem and I am stumped.