64bit Windows 7 Temp Files Optimizing To Faster Drive
Apr 2, 2012
I'm looking for advise on what steps I can perform on one of my computers, in order to properly consolidate and move all my ( temp, cache, etc. ) files onto a faster drive I just recently installed.
I recently ran across a couple of 74Gb Western Digital Raptor drives (WD740) in my garage and wanted to integrate one of them into my computer that I use to store my DVD backups on (etc), with the hopes of increasing system performance without having to perform a complete system reinstall.
Also money is a concern; or else I would just get a Solid State Drive.
This computer is running 64bit Win 7 Home Premium I have 8Gb ram installed. The Raptor is formatted and assigned drive letter (Z:).
I have my tower pc on constant all day- to record a streaming IP Camera from my work.Initially, I saved these files into my docutments- which they would save as .avi files, and after every several days I would delete them as they would take up ALOT of space on my pc.My pc is 250GB in size, and usually it would be about 80GB full before I had the IP Camera. Just recently, I noticed all of the IP Camera avi files seemed to have disappeared from my documents if I went directly to the folder... I could still see them in documents when I was choosing a location to save the recordings.Upon right-clicking the avi files in the latter, the files would be of no size and wouldn't play.Now my computer is 210GB full in the matter of a week.
I have a system with 32gb DDR3-2400, a 256GB SSD and a couple of spinners. I have set up 4gb of the RAM to be used as another RAMdisk using the softperfect software. This problem has been going on for some time, but has been more of a problem since I started using the RAMdisk. Not because the RAMdisk itself isn't working well, because the stuff that is stored there keeps getting reset.I have pretty much identified that when updates are installed through windows update (either from Microsoft update or from my WSUS server), the following are reset to defaults
1. Pagefile is automatically managed and stored on the C: drive and is set to 32gb
2. The TEMP and TMP environment variables are reset to the C:users default location
3. The temporary Internet Files location is reset to the default C:users... location
There may be others that I have not discovered.I have manually set my swap file to 1024/2048 on the D: drive (a spinner), on the belief that it should rarely if ever be needed with a system equipped with 32GB of RAM. I'm certainly not inclined to waste 32GB of space on my SSD for an unused object.I have placed the TMP/TEMP files, cookies and Temporary Internet files on the RAMdisk to squeeze a little extra performance out of the system. (Yes, I know, I'm not really getting much benefit).Photoshop and a few other programs also use the RAMdisk as a scratch disk, and were the main reason I set it up in the first place.This is becoming a real pain when it gets reset as I have to manually change everything again. Anyone know a way to make windows leave settings at what I set them, instead of having it continually reset the values to what it wants? I'd prefer to have it my way. I know there will be proponents of "leave things as windows wants it".
I think its a serious problem, but something is writing huge files into my WindowsTemp folder TMP0000000789F2D108048D0CAD is an example of a filename. Its roughly around 4 gigs. The problem is causing my netbook to be very slow and I suppose it harms the HD as well.It writes until space free is very little. Goes away after a long time and does cleanup again. But is very annoying.
Windows 7: ComputerLocal Disk C:WindowsTemp Folder Have a series of SQM extension files fwtsqmfile00.sqm to fwtsqmfile19.sqm
Some have mentioned that these files are associated with Windows Live or Windows Messenger. I have entered Windows Live or Windows Messenger in Start (Search programs & files) & have not found them. I have looked under Turn Windows Features On & Off. Still have not found Windows Messenger.
Is there an automatic temp files clean-out process in Windows 7? Every once in a while I noticed that my hard drive is somehow automatically purged of about 30 gigs of data, so all of a sudden I have roughly 30 gigabytes more hard drive space available that the last time. I checked, but I haven't trashed any files.
I'm wondering if there is some kind of automatic temp files clean-out process that Windows 7 goes through at certain times. Or could this be related to an automatic disk defragmentation? My defragmentation is set to run once a week, but I've only seen the 30 gigs or so open up about three or four times in the last year.
And if there is a process by which Windows 7 automatically "cleans house" to open up this much hard drive space, is there a way to do it manually without throwing away any of my normal files?
I just realized that this forum is for Windows 7 and I happen to be using Xp - so flame away if you like. I think the fundamentals still apply.I have DVDs with data files (inspection data) that I need to copy to the network. I can also copy to a USB2 external drive. The issue is speed. I am using xcopy /s. It is taking almost 45 minutes to copy the DVD to my hard drive. I have over a hundred DVDs. If I was getting paid by the hour this would be a great job!I have try making disk images but the speed is about the same - same for internal HD or Eternal HD. I am using a new dell quad 6500. I realize that the cd read speed is going to be a factor - however after getting the files off the DVD to my C: it takes over 30 min to copy from my machine to the USB drive.
what are .sqm files in temp folder? Files are named like this: fwtsqmfile00.sqm, fwtsqmfile01.sqm and so on. Files began to appear after re-installing Windows. And it seems that the files will show up when i turn off the computer.
I am using Windows 7, My desk top computers has three hard drives, the "C" with just the programmers and other system files, the other two hard drives (all SATA) are used with my main files (E & F) . Drives E & F are set as "Shared drives " I often update files between my Toshiba laptop (also using Windows7) and vice versa. I have a hard wired network connection between these two computers. Now my question why are so many temp files being added to my shared hard drives, I have only noticed this recently, I certainly did not get these when I had an XP Pro set-up, and between four computers. Is this problem associated with me allowing shared use between computers? I am also running office 2010 on both these computers. My emails are using outlook and IMAP, both computers emails systems are always synchronized, I think this is a feature of MS Office 2010, and is very helpful.
What happens if I delete these temp files? I am enclosing a copy of the temp files on my "e" drive so you can see.
Is there any way to actually optimize my throughput on both tx and rx within win 7 64 bit for the AWUS036NH from Alfa. I've got signal out of the whazoo, but hardly any Tx or Rx capability.
I'm running Windows 7 and IE 9. In the default temp folder (tools>internet options>General Tab, Browsing History, settings>view files), I can see a number of cached fies, but not all the jpgs. On my XP machine with IE 8, after I visit the same website as on my Windows 7 machine and follow the same steps as explained above, I can see all the jpgs. The Internet Option settings are the same on both machines. Why can't I see all the same files on the Windows 7 machine?
My temporary folder has been have batch files created in it every 15 seconds or so. My mouse is the arrow with the busy circle at 2'oclock of it constantly, so something is running. I checked my processes and they seemed to all be normal. I updated everything including windows.net 4 so I don't know what else to try.
It is Windows 7 64bit Home i3 Processor w/ 4gb RAM
And the batch files all have been 6 digits numbers increasing in numbers so it would be like 178521 and the next one would be 178762 etc. There are two conhost.exe running.
I'm trying to optimize performace of my SSDs.Can I move Pagefile, TEMP and TMP files to my Ramdisk? I already moved interenet cache.I have 32GB of memory available and an 8GB ramdisk. Memory allocated to ramdisk is dynamically managed by software (Primo Ramdisk Ultimate) so only the used portion is used and not the full 8GB.
I recently purchased a 7200 rpm WD SATA drive and would like to migrate my Win 7 drive from a slower 5200 rpm Seagate SATA.Can I do this without reinstalling Windows?f I can migrate from one to the other, will there be any problems with validation?
I transferred photos, through Bluetooth, from my Blackberry to my laptop that is running Windows 7. They appeared in a Temp file (under Local) but have since disappeared. Is there a way to retrieve them? Does this mean I have something on my computer that automatically deletes these files?
I have a lot of directories that need to be transported via USB drive later (the files/folders vary each time). I want the files to remain in their original location, but have some kind of folder or structure where I can group the folders so that when I need to copy them, it is a simple matter of selecting one folder and copying it to the USB drive. I don't want to create duplicates of files or folders. Basically, I want some kind of folder or holding area that will have pointers to the folders/files I need to copy. Can I do this in Windows 7? I had was to use Libraries. That would kind of work, but it isn't drag and drop and is more awkward to add folders to.I know at the beginning of the week which folders I will need for that week, so I want to set it up in advance sow hen it is time to do the copy, it is easy.I know I could setup a simple batch file (with XCOPYs) , but was hoping for a better solution where I could browse the files before I copy them, etc.
Recently I've noticed that some '.tmp' files have been created in default 'Downloads' folder of Win7 which is located at 'C:UsersUSERNAMEDownloads'. Here's a pic:
I don't use the default downloads folder for storing my downloads and I have configured all my browsers to save files to another location. But since last month, I noticed these small ".tmp" files being created in default downloads folder. I've been using Win7 Ultimate for almost 3 years now and I've never encountered this before. Or is there any way that I can see what program has created these temp files.
BTW, I use multiple browsers, Firefox, Chrome, Opera and sometimes IE8. I'm pretty sure it's not IE8 and Firefox coz I've been using them for a long time and they've never created temp file in 'Downloads' folder. I've recently installed Chrome and Opera and right now Chrome is my default browser. I went and cleared all my browsers' cache files using their own method withing the browser, but they are still there. Really annoying. I know I just can delete them, but I want to know which program has created them.
So I just purchased a SSD and put Win 7 on it. All is fine and dandy, but I still like to visit my Vista instance on the old hard drive. It appears that the only way to switch between which hard drive & OS to boot to is to go into the BIOS, rearrange the boot sequence, and then reboot. This is rather clumsy and time consuming IMO. Is there a faster way to choose which hard drive to boot from? I've looked into "dual booting" which will prompt the user with a simple menu to choose which OS to boot into. This is exactly what I want. The problem is that it appears this is only available when both OS's are on one hard drive, which is not my situation.
I'm currently doing a clean install of windows 7 64 bit on my 32 bit XP computer, I used the upgrade advisor beforehand and it said a lot of my programs where 64 bit compatable, and a large chunk of them are on my other hard drive (the one im not installing windows 7 on). After the install is finished will they be useable or will I have to reinstall them?
I just re-replaced my Segate ST31000340AS with a new Segate ST32000641AS (64m / 600mb) double the old drive. Did a clean install the 5.9 number did not change. Anyone knows why?
I need to delete 100's of Gigabytes of info off of an external drive sometimes. But I cannot afford to do a quick format. It takes so long to delete that much info, even if I were to bypass the recycling bin. Isn't there a fast way? A quick format is very quick, but deletes everything.
I currently have my PC connected to a Sony 46inch TV. It's a HDTV capable of outputting 1080p. I didn't have any problems connecting but the picture is really blurry even at max resolution of 1920x1280. Any ideas how to solve that problem?
I have this problem with Asus p5q3 motherboard my system temp goes up to 60-70(celsius) and cpu (intel core 2 quad q9550) temp is low as 30-40(celsius). So how can system temp be that high?
I use the picturers folder to display as my screen saver. In Windows XP I could control the dispaly speed of the pictures. In Windows 7 the three settings of Fast, Medium, and Slow are too fast. In the changing pictures option of SLOW it is still too fast to enjoy each picture.
I'm using Corsair SSD as Windows 7 x64 boot drive, and I moved both User & System Variables TMP/TEMP directory to a new common TMP directory in another hdd (Drive D) & also disabled pagefile on my boot drive (but enabled it for Drive D).
Question is, what happens if I take off my hdd (Drive D and Windows 7 / applications need a temporary directory which doesn't exist anymore ? Will Windows 7 be smart enough to create a new temp dir in the original location ? I wonder if the dependancy on the hdd as TMP directory becomes critical.
About pagefile, I understand Windows 7 needs a min pagefile of 400MB on boot drive to allow memory dump. What happens if I disable pagefile on boot drive & enable it on another drive ? Will memory dump work ?
Got a New Windows 7 machine about two months ago. Recently discovered about a week ago that the only thing that will actually run is Internet Explorer 64 Bit. Ive bootedd into Safe Mode (with Networking and Non Networking options) and had the same results.I dont think I have a virus but as I cannot run any programs I cannot check. I think that this is some sort of Windows Error. Ive tried to use the In Built 'Startup Repair' and also the 'Memory Diagnostic' Tools, which have returned no errors.Also Ive tried, certain exex file registry fixes which are out there, and these dont work. I have some Excel files on my desktop which which I click them I get the following Error 'There was a problem sending the command to the program'I have not got any restore points which go back far enough before this issue. Also do not have the CD.
