Advanced Boot Screen For Dell Inspiron E1505 Running Windows 7 Pro?
Jun 23, 2012
I have tried F8 for the advanced boot option, but the screen I get does not offer advanced boot as an option. I get a screen with six line that all have vista in them and am unable to do anything in that screen. It will not boot when b or enter keys are hit it won't do anything when I try select enter the command line and I am unable to exit this screen using esc button, I have to manually turn off computer. How do I find the advanced boot screen for dell inspiron E1505 with windows 7 professional?
View 1 Replies
ADVERTISEMENT
Dec 14, 2009
I went to the dell site and checked if I could load windows 7 on the Inspiron 1505 and could not find that I could. Can I load windows 7 on the Inspiron 1505?
View 1 Replies
View Related
Aug 25, 2012
where I can get a driver for my DVD drive Dell Inspiron E1505 Win 7 32 bit for free or small change?
View 9 Replies
View Related
Jan 2, 2012
I was installing windows 7 on a dell inspiton e1505 and to note book came unplugged before install completed
View 2 Replies
View Related
Jan 17, 2012
Running Windows 7 Home on a Dell Inspiron. My account was setup as an administrator account and shows as such under account management. But upon boot up I get a message about not being able to run a startup program because I'm not logged in as an administrator. Also, when going to DOS prompt, I can't run chkdsk /f because I don't have the level of permission required.
View 5 Replies
View Related
Nov 14, 2009
Anyone install Windows 7 (Ultimate or similar) on a Dell E1505 w/1GB RAM?
I can read MS minimum suggested hardware all day long, but nothing would beat hearing what someone running the configuration would have to say.
The machine is presently running WXP Pro just fine, and because it ain't broke, I am dumb enough to try to fix it.
View 3 Replies
View Related
Nov 29, 2012
I've tried F8, F2, and F12 to get to safe mode or startup options but all I ever get is the option to either start normally or launch repair. The function keys appear to do nothing. Launch normally doesn't work and just cycles me back to the two options again. Repairing just keeps "repairing" with nothing ever happening indefinitely. It will ask in the beginning if I want to restore to a different time, and if I click yes, nothing happens except that it keeps "repairing". There's nothing important on the hard drive that needs to be saved. I want to reformat, but I didn't get any disks with the computer, since it said I could use Dell Restore on my desktop, which of course I can't access now. Is there any free, safe program I can use to boot it up and restore? And can I even use a disk to restore if I can't access the advanced boot options to change it to "boot from disk"?
View 5 Replies
View Related
Jun 13, 2012
When I go to Indexing Options within the Control Panel, the dropdown informs me that "Indexing is not running" and only the Advanced button is available. I really don't seem to be having problems with my searches although many a time when doing a search , there is a banner saying that "Your searches may be slow because index is not running." I will then click the prompt to index. The searches seem to be fast enough, but I really can't tell if they should be faster.Even though I have selected to index, when prompted, going into Index Options will still show that the index is not running??? Could it be that this action is only temporary at its time of use? Once I get indexing working, I would imagine that I would like to choose just those folders where speedy searching would be of benefit, but I'm not sure which files/folder they should be. I'm thinking Pictures, Music, Documents, Program Files (x86), Program Files.
View 3 Replies
View Related
Jan 22, 2010
My Dell Precision 670 will not boot Windows 7 after upgrading the memory to 8GB.Configuration follows:*BIOS A06*2 x 4GB SIMMS in slots 1 and 2. These are correct WS670/4GB PC3200 EEC registered modules as recommended.*memory fan is installed*3 SCSI drives with Adaptec 7901 RAID controller.I've got a dual boot setup, and the system boots and runs fine from the alternate OS (Win XP x64) just fine. The BIOS lists the memory as installed and shows no errors or problems. A memory test indicates that the memory is okay. When I try to do a boot repair from Win7, the Win7 OS is not listed and installing the correct RAID and SCSI drivers from the repair window does not make it visible. The partition is not, in fact, visible from the repair tool. When I put the old memory back in (4 x 512mb SIMMS in slots 1,2,3,4) the system boots and runs fine with Windows 7. What's up with this?
View 5 Replies
View Related
Mar 12, 2012
My dell optiplex 755 runs on windows 7. How do I boot into safe mode?
View 1 Replies
View Related
Oct 2, 2012
The BIOS in this system is not fully ACPI compliant. Please contact your system vendor for an updated BIOS.*** STOP: 0x000000A5 (0x00000011,0x00000003,0x00000000,0x00000000)
View 2 Replies
View Related
Jun 7, 2011
I have a Dell Inspiron 1440 running windows 7. This computer was purchased new about a year and a half ago, and I have had no problems up until a couple days ago. I went to turn my laptop on the other morning and as usual the dell logo came up and loaded, then the windows symbol saying "starting windows"... then strangely a black screen with a cursor arrow... nothing more, no log in screen... just black nothingness... I have ran the diognostics and they all say "pass". I am able to access F2 & F12 but it will not boot in safe mode or with a command prompt.
View 3 Replies
View Related
Feb 20, 2013
my computer wont boot ,its says ,BOOTMGR image is corrupt.the system cannot boot what do i do to boot or repair this
View 1 Replies
View Related
Jan 10, 2013
I was playing rFactor last night and all of a sudden, the screen just went crazy. Almost like your trying to watch TV with rabbit ears. The screen is all garbled, almost like it has been mirrored 6 times across the screen. I am in the process of saving stuff over(takes forever trying to read it) and am going to try a complete system reinstall.
View 2 Replies
View Related
Jul 3, 2012
When I turn my computer on it goes straight to a black screen and says dell and freezes.
View 10 Replies
View Related
Jun 20, 2012
Graphics card: AMD Radeon HD 6470m All drivers are installed.above the screen is blank. have there desktop.
View 2 Replies
View Related
Jul 6, 2009
I know from searches on here that this laptop is pretty much obsolete when it comes to finding drivers for some aspects of Win 7, but I've also found some who seem to have got it running well on it, so hoping this isn't maybe a driver problem but something else that maybe can be easily fixed.
Basically Windows 7 installed without any problems but is running in a box centred in the middle of the screen - I tried to improve it by changing up the screen res, but while that did bump it up a bit it's still well shy of the screen edges i.e. 1 inch of black all around it. Is this thus another driver issue do you reckon or does anyone know of any other way to increase the res, as I can't find anyone else with this particular problem in searches here or elsewhere (unless I'm not searching with the right terms).
Already have it installed on my desktop so the laptop was really just for backup of sorts and not the end of the world if it won't work properly, but be nice to know for sure.
View 1 Replies
View Related
Jun 20, 2012
Graphics card: AMD Radeon HD 6470m All drivers are installed.above the screen is blank. have there desktop.
View 1 Replies
View Related
Nov 4, 2011
I run win 7 sp1 on dell inspiron 1520 Its dvd-writer was damaged, so i bought an external Transcend dvd-writer and its working properly but when i insert a bootable cd in it and want to boot the windows from it, the windows does not recognize it and boots normally from internal hard driver as usuall. I am sure the cd is bootable and have tested it in other systems.
View 7 Replies
View Related
Dec 20, 2012
I reset the cmos by pulling the battery, and now the comp won't boot, won't show the F2 F^ boot options in the upper left corner, and won't react to any key pressed, just shows a messages saying to run setup, but no clue how to get there using usual keypressess.
View 2 Replies
View Related
Oct 29, 2011
My Girl recently got a Dell Inspiron N5040, when we first turned it on, after a few mins it randomly restarted, i thought maybe its just an update (had to install loads of windows updates) however, over the past week, its being doing it every time its been turned off for a few hours... however once it restarts and comes back on, it usually is fine, It's only when leaving it a long while then turning it back on, it does the same again, and today for the first time we got a blue screen of death, which i believe may lead to some answers, here is the report:
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.768.3
Locale ID:2057
[code]....
View 4 Replies
View Related
Jul 18, 2011
i am using dell inspiron N5010 model, i have installed win7 ultimate on this, now i want to install win xp on this ,how to install?, i have tried in bios settings changed it as ATA but if i am installing win7 cant boot and when installing win xp system suddenly get switch off.
View 5 Replies
View Related
May 25, 2012
is there are any compatibility issues with windows xp with i3 processor....?
View 1 Replies
View Related
Oct 22, 2011
My dell inspiron 537 decided to completely stop working it has a blank screen with a blinking cursor in the left corner Alls I wanna do is get into the start up menu only options I get are f2 and f12 which are useless.
View 2 Replies
View Related
May 3, 2011
I've had my computer for 8 months, it's a dell inspiron 1545 running windows 7 home premium. I'm suddenly unable to start the computer as it just comes up with a blue windows 7 screen with a cursor and that's it. I've tried starting it in normal mode and and startup repair but the same thing happens with both. I ran the diagnostics test and it came up with error code 2000-0142 which after googling i've found is a hard drive problem.
Will reinstalling windows 7 wipe my hard drive?
View 4 Replies
View Related
Dec 3, 2011
She asked me to restore her computer to factory settings. She is not at all tech savvy, so I know for a fact she did not do anything to mess it up. It was running fine, but she just wanted to clean it out and bring it back to like new. She pretty much only uses her computer for school papers and email. I have done factory recovery on many computers at this point and I have never had any problems at all until now.
First thing I did was hook up my external hard drive and saved all of her documents and pictures. I then restarted the computer and pressed F8 and then clicked on repair my computer. It took me to datasafe backup and restore. I went as far as to restore the factory image. I chose not to save any files and to restore it to new again. It completed as normal and I clicked restart.When it restarts, a list of files pops up and then it says "Setup is preparing your computer for first use." It also shows another list of files that seem to be loading as well as it tells me that it is booting in safemode. Next thing it says is that "Setup will continue after restarting your computer". It then continues to restart and perform this boot loop until I turn it off.
I tried to repair the computer and it would fail saying it was offline. So, I plugged the hard drive into an adapter to hook it to my other computer. I opened the disk manager. I saw that the recovery partition was not active like it is on my other hard drives. I also see that for some reason it has a tiny partition that is labeled fat. On my other hard drives it is labeled oem partition. Not sure if this makes a difference or not, but thought it was worth mentioning. Also, when I choose to explore the recovery partition, it says the recovery folder is empty, however the properties say it is nearly full with many files. On my other hard drives I can not access that folder at all. I also am not sure if this matters or not, but didn't want to let anything I am doing go unnoticed.
View 4 Replies
View Related
Dec 28, 2011
Running a Dell Inspiron Zino HD. Constantly crashes, get either a blue screen, black screen or stripes. Usually says something about a crash dump but goes blank before I can read.
View 2 Replies
View Related
Oct 10, 2011
I bought the bleeping Dell Inspiron 560, was to rapidly tap F8 during startup to bring up the "Advanced Boot Options." I saw the guy at Best Buy do it but it did not work on my machine when I got home. I'm using Windows 7 Home Premium. The computer came without a manual or any disks.
View 4 Replies
View Related
Jun 9, 2011
Everytime I restart the computer it boots into a repair mode,attempts to repair my computer, and then tells me "startup repair cannot repair this computer automatically". Why it's doing this I don't know,the system was working fine an hour ago.The only change I made was to attempt to make my RAID work, I rebooted, entered BIOS and changed my "Sata Operation Mode" to "RAID",then the problems started happening. I tried turning it back, even resetting BIOS defaults, but no go. During the boot up though I turned my comp off during the middle of windows loading, I wonder if that could have caused the problem?I know it's not recommended but it's something I've always done and never had a problem with.I've been trying to access my Advanced boot menu to start windows normally(perhaps it's stuck in some kind of repair cycle?) but pressing f8 does nothing, I've tried a thousand times.
I put in my Windows 7 disk and attempted a repair through there which halfway worked. When I boot up now it gives me two OS options to choose from, Windows and Windows 7 Home Premium (Recovered).The latter one boots up windows fine but all of my files are gone and it's telling me my copy of windows is not genuine! I had the majority of my data so it's not a huge deal to do a clean install but I would like to avoid that if possible.I'm using an asrock 890fx mobo with AMD processor.
View 9 Replies
View Related
Sep 15, 2012
I'm currently in safe mode in my windows 7 laptop which I can only access this computer by. The reason is because when i try to boot windows regularly, I get past the login screen then to be pwned by some black screen with my cursor only displaying. I downloaded a software from IOBit called Advanced system care, then I ran a full system clean. I came back later to reset my laptop and encountered an update, I let it update. When the update was finished, I started getting the Black screen of death.
Things I tried:
- System restore (It couldn't find a restore due to the update)
- Uninstalling updates (No difference was made)
- The CTRL+ALT+DEL then some link for the fix (CTRL+ALT+DEL doesn't work)
- Start up repair (Nope, no difference)
- The /sfc command (It worked but, still no difference)
I'm think pretty much stuck as I don't have a Windows 7 CD, although I have a formatted USB, I'm considering downgrading to XP. But, I'm getting problems with that as well.
View 9 Replies
View Related
Dec 28, 2009
How to Boot to the Advanced Boot Options in Windows 7 ?
View 0 Replies
View Related
