AMD 7750 Cpu Motherboard Options
Oct 31, 2011I have an old 7750 am2 socket cpu but am2 M/B's are discontinued so what options do I have? I would also like HDMI to use PC as a media ctr.
View 2 RepliesI have an old 7750 am2 socket cpu but am2 M/B's are discontinued so what options do I have? I would also like HDMI to use PC as a media ctr.
View 2 RepliesHas anyone had issues with the Sapphire HD 7750 ultimate?Since installing a week ago I am getting small malfunctions with this card. These are
1. Occasional jumping / glitching of web pages inside IE9. A very fast twitching effect of the whole page.
2. On one occasion, a web page only refreshed to half way down so I could only see the top half of it. Re-starting the tab cured it.
3. When viewing a photo, if I alternate between full screen and a smaller size, the control bar at the bottom of photo viewer becomes corrupted with the buttons often disappearing. If I wait 30 seconds then snap to full again the problem normally fixes.
4. Yesterday about 6 or 8 red blocks appeared, around the bottom task bar. Each was about the size of a task bar icon, they would not disappear until I unlocked the task bar and moved it around a bit.
My install process was as follows:Shut down and remove old card (HD 4350).Install HD 7750.Reboot.Install Catalyst 12.3 driver set from the CD which came with the card.Check for updates to catalyst, download 12.4 and install that version.Perhaps I should have uninstalled the previous drivers for the old card first. I had assumed it would be OK with both cards being AMD.I do not believe there is any issue with temperature, the issues are present even at a cold startup and my GPU temperature has never been above 48 deg, is is normally around 40 in general use.I am tempted to RMA now unless someone else has seen this and can say it is drivers?
The audio worked before I installed the AMD HD 7750 graphics card, and now I get the "Speakers not plugged in" error message.
Things I have done: Checked BIOS, onboard audio is enabled (there is no auto option, just enable and disable). Reinstalled windows I just finished downloading and installing the latest drivers from my MOBO manufacturer.
I'm not sure what else to do, geek squad (hah) said they think it's either the CD that came with the MOBO (which I reinstalled everything on it after reinstalling windows) or it's a corrupted port. Which, since the mobo is brand new I can't really believe that. Especially since it worked prior to the graphics card. I installed the GPU, and then it wasn't used for a few days at all since I was out of town, then came back and there is no sound.
The only thing I haven't done yet is take out the GPU and see if the audio comes back.
915 motherboard intel support chipset motherboard sound, vga, usb drivers download
View 1 Replies View Relatedi just finished my build and i have no idea why i went for a motherboard with 2 slots for ram it can hold up to 16gb but luckly ebuyer sent me out an extra 4gb of kingston hyperx ram so i have 8gb all together but theres a problem theres 4 sticks ! obviously i wouldnt want to send it back so what do ya think either upgrade my motherboard and smash the extra 4 gb in there or keep to my original one i dont have money to blow atall im really struggling if its something that will really make a difference ill go with it if not then ill just keep to my original and when i come to buy a graphics card i will get a 2gb graphics card to help with gaming?
View 3 Replies View Relatedrecently I've noticed that when I close my laptop that it won't go to sleep so when I went to change the "when lid closed" options in my power settings they wern't there. I also checked in the power button settings to the side.
View 8 Replies View RelatedMy touch pad won't click certain options in the control panel, namely uninstall or any power options. Ran Malwarebytes and Avast with no infections.
View 4 Replies View RelatedAfter a recent crash, my boot up sequence now starts with a boot loader giving me the option of starting either of two windows 7 versions or doing a memory check. I don't want to go through this step. Is there any way to select a default version to run and forgo the boot loader options?
View 2 Replies View RelatedIn this tutorial, we'll show you how to customize Windows Explorer and your folders even more by using the folder options window. You'll discover how to customize folder views and peek into the hidden files and folders on your PC.
View 0 Replies View RelatedI'm running Windows 7 home premium. I seem to be unable to access Internet Options both from the desktop shortcut and control panel. I've tried restoring the system to an earlier point and this has failed (Error 0x80070005 failed to extract the file Windowssystem 32driverssfi.dat).
View 4 Replies View RelatedI recently bought an Acer desktop computer running W-7. I cannot get either the Power Options or the Screen saver part to work. I set them but they do not hold.
View 10 Replies View RelatedPower options resets itself to "balanced" every time I turn my laptop on. If I set it to "performance" or my own power plan this is never remembered when the laptop has been rebooted.
View 4 Replies View RelatedWhen I start Windows 7 64 I get 3 boot options. Windows 72. Windows 7 (recovered)3.Windown 7 (recovered)The first 2 are both dead and I would like to know how to make them go away. I used the start up disk it shows all 3 options but the first 2 it says that there is 0kb in both files and that only the 3rd oprion has any info in it
View 2 Replies View RelatedRunning Win7 and certain programs do not display options. For example... if I run msconfig.... it pops up but there's nothing there... just a blank GUI... If I try to install a program... the install wizard pops up... but it's just a blank GUI... same with Task Manager. I can run CMD though. I tried to run a Outlook export and the export wizard is also just a blank GUI. And then in Chrome when I try to browse websites it's like 90% of the CSS doesn't work. I think I might have a virus but Kaspersky couldn't find any issues... I also tried some online scanners. I want to install some more serious software but I can't get through the wizards because the options don't exist.
View 3 Replies View RelatedI was trying to back up data from office to home via VPN connection. All PCs running Windows 7 for both ends. I have a batch file that uses Robocopy to perform "incremental backup" from the office to home.Here is the example robocopy c:/sharedFiles "\192.168.1.10myHomesharedFiles" /E When I run the batch file, the VPN connection was fine. So the VPN was not the issue.I found it strange that every time I run the batch file. It uploaded the same file again and again. I was pretty sure it already did it but it marked it as newer and did upload the file again and again. This is a waste of bandwidth.I am tempted to use /mir but this option is very risky as I could have important files deleted by accident.By my understanding, option /E should do the job as it only copies the modified files as well as new files and empty folders. That's what I want to do.
View 4 Replies View RelatedAs the tittle says,I want to remove the properties feature because the feature isn't something I want to install.
Perhaps is caused by rootkit,however my ESET doesn't detect anything.
Look at screen-shot below,the properties option that I highlighted is what I want to remove,but I dunno the way to remove properties option. location where the properties feature located then I want to remove it as soon as possible. I try other AV because I just want to remove the option manually.
I just installed Da sims on a HP pavillion dv5 laptop with Intel Core i5 processor & 4g ram with windows 7.The game itself runs rather fine, but the options on the upper part of the screen (build, create family, demolish...) are oddly GONE.So, I installed the same game on my PC (wich runs on win XP) and it works perfectly, with th eproper options on the screen�s upper section.
View 1 Replies View RelatedHowever, If I try to change any settings in the options menu, when I click accept the game just freezes. The PC doesn't freeze, JUST the game. When I page out and close the game and reopen it, sometimes the settings took effect, sometimes they didn't.
This happens EVERY time I click the accept button. Other than changing settings in the settings menu, the game works flawlessly. It's just a pain because I would like to change up some settings on my keyboard but after I change it and hit "accept" it just freezes and I have to restart crysis.
**It did NOT do this with Windows 7 Ultimate x64 RC.***
SPECS:
-I'm running Windows 7 Premium x64
-ATI 4850x2 Card in Crossfire (absolutely no scaling issues). this is not two separate cards. It's one card with two GPUs on it.
-I'm opening crysis in 32 bit mode
Anyone have some ideas on what this could be?
I'm outgrowing my boot disc. I'd like to migrate the image to a new disc. I will not use anything from Symantec so that eliminates Norton. On Amazon, the negative reviews for Acronis run 2 to 1 so that leaves that out too.Suppose I install Windows 7 on a new disc and run an image restore. Would that give me back my current image with all programs installed?
View 9 Replies View RelatedAlright, I have a problem I'm not sure how this happened but when I tried to shut-down / restart my computer all the buttons were missing.. and in the start menu options where nothing is selectable I tried searching over the web trying the gpedit.msc and some registry hacks but still the same problem.
View 9 Replies View Relatedi'm looking for a way remove these options from my properties list.I want to remove the option where I highlighted,maybe there have some registry to clean up,please show me the way to remove these options
View 1 Replies View RelatedI set my options to shut off my monitor and to stand by within power options and when I re boot they change back to defaults.
View 7 Replies View RelatedI'm a computer tech, and I service a lot of different computers for many different people. In the old days, I could make a bootable floppy with all my utilities on it, and be on my way. Now, of course, few people have floppy drives, but I still need a way to boot all the different computers I find, whether 32-bit or 64-bit. I created a Ubuntu Linux CD, but I don't know the software well enough to display any directory tree apart from the Linux system (I can't browse the Windows directories, or even see the Windows directories). I have a pair of new 16 GB USB flash drives that I would like to make bootable. What should I put on them, and how would I do it? I think I managed to get Win 7 64 on one, but that probably isn't the OS I want to use for my application.
View 1 Replies View RelatedWhen I open the indexing options in control panel, it does not list anything - says its "waiting to receive indexing status".I located a "search" file in my directory with subfile "indexed locations" that lists literally everything on my computer including emails. Normally when I want to search for something on my hard drive I would not want emails to be included in the search. I also found "sticky notes" in that same subfile? I'd like to modify my search indexing but I can't get into the list of locations.
View 3 Replies View Relatedhow to add the "Dim the Display" feature to a desktop?
I found a utility called "Pangolin Screen Brightness" that allows you to do it manually, so I know it's possible, but can't find anything that can add that option to the power settings.
i have laptop that has some propriatory software for the power settings, specifically its the toshiba evo utility. there is a hard button for it above my keyboard. my usual policy is to run the eco when i'm on batteries and run a windows plan when plugged in. i want to run the high performance when i plug in, but everytime i press the eco button to come out of eco mode it defaults to blummin balanced.save for deleting the other plans, is there a way round this? can i set the default plan to always be high power when switching back and forth to my proprietry tosh eco mode plan?
View 1 Replies View RelatedWhen I go into "Backup & Restore Your Files" & try to use any of the "Backup" features/selections, none of the selection options respond. "Manage Space" "Turn on Schedule" & "Change Settings" do nothing when I click on them? The "Backup Now" button also is unresponsive.
View 2 Replies View RelatedHow to Open Folder Options in Windows 7 ?
View 0 Replies View RelatedHow to Boot to the Advanced Boot Options in Windows 7 ?
View 0 Replies View RelatedHow to Boot to the System Recovery Options in Windows 7 ?
View 0 Replies View RelatedAnd I just downloaded a game, titled 'Lucent Heart'and when I attempted to open it, it says that the system doest support the screen resolution more than 1024 x 768. so i tried to change it. when i opened the screen resolution, and clicked the options in resolution, i only saw two. the recommended, which is 1024 x 600, and the 800 x 600. i tried to apply both, but it still doesnt work. -.- fml.
View 2 Replies View Related