For some reason when i plug in my USB dance pad vista tells me it can't recognize it and it shows up in the device manager as unknown device. This device does not come with drivers and does not need any it works fine when i plug it into a pc running Windows xp but it wont work on my Vista computer also i plugged in other usb devices in the same port and they work fine so i know it's not the port.
View 9 Replies
I ordered a SanDisk 4.0 GB Cruzer Micro USB Flash Drive with my Vostro 400 computer running Windows Vista 32 bit Home Premium Edition. When I inserted the Flash Drive in the USB port Windows asked me to install the driver for the device. There was no software included with the Flash Drive. I checked the box requesting Windows to look for a driver through the Windows Update feature. It came back and said no driver could be found for this device. I then went to the manufacturer's website but they don't have a driver listed for this particular Flash Drive. I called Dell and all they could tell me is that Windows should have recognized the device automatically. how I can get Windows to recognize this device. My brother has the same identical computer and Flash Drive and his installed without a problem
View 8 Replies View RelatedCan not get my HP 7400 scanner to work after upgrading to Vista Ultimate 32 bit. Not the hardware - works fine under XP pro using same hardware configuration. Did a clean install, installed motherboard BIOS updates, scanner BIOS updates, Vista updates and the correct driver from HP. The scanner installed and Device Manager says device is working properly. When I try to scan, scanner initializes, starts to scan then locks up. Then can no longer be seen. ASUS M2N-E motherboard with AMD dual core. Other than that Vista works OK with the rest of my system
View 9 Replies View Relatedi have installed the correct driver for this belkin bluetooth usb dongle model: F8T012XX1 but in device manager, it has the belkin device and microsoft bluetooth enumerator, which is great. but when u get further down the list. it has a tab named "other devices" and then a subtab with "bluetooth peripheral device" which has an exclemation mark on it. i have searched for driver software using the update service but it cant find no update. i have looked for the name of the manufacturer but found nothing.i then disabled the unknown device, and sent a picture to my mobile phone. which confirmed that it was not the belkin bluetooth device. so i uninstalled the unknown device, restarted the computer. then when i logged in, it said that it had found a new device and wanted me to find the CD that came with it.
View 6 Replies View RelatedI know this is a repetitive topic, but I can not seem to figure this one out. It is a HP Laptop DV9815nr. I do not know much about it as it is not mine, but the problem is the audio was cutting out and now there is nothing. The computer is not recognizing any type of audio device installed. Even in Device Manager, there is no option for Sound, game and controllers. I have tried downloading the driver and installing, but no luck there.
View 9 Replies View RelatedI'm running Home Premium 64 on a Sony Vaio Laptop (CS170F). I'm having a curious problem: Yesterday I plugged into the machine the dongle of my wireless logitech mouse, and for some reason the machine said "Your unknown device is ready to use" (my OS is in spanish, the messages may not be accurately translated). Since then, an annoying message pops every few seconds warning about an "unrecognized USB device", that "didn't work as expected". The best part is this, if I click on the tray icon, sometimes the informative dialog window is emply, an other times shows all the USB ports in the system plus one extra with a "unknown UBS device", even without any device plugged into the system. I've tryed removing the unknown device from the device manager, but it shows up again.
I had been running Vista Ultimate x64 for a few months and recently found that I can only use the original USB mouse?! Installation of any USB mouse would show a new "USB Human Interface Device" in Device Manager but it just won't work. Installation of the very same model of my original mouse didn't work neither. So basically I am stick with the current mouse?
View 4 Replies View RelatedI went to turn it on this morning, I just had a black screen showing the following words;
Press F2 to run
Press F11 to boot menu
Auto detecting PRI Master Atapai CDROM.
It then went to reboot and select proper boot device or insert boot media in selected boot device and press a key. I went into the BIOS to change the boot order and inserted my Vista home premium 32bit. I then got windows is loading in files. After a short while I got the black start up screen with Microsoft Corporation but after a few seconds it just froze. Moments later it went to a blue screen with white writing part of which said the following; A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO PREVENT DAMAGE TI YOUR COMPUTER.
I have Windows Vista Business x64 SP1 and updates installed, both installed yesterday.
My bios and motherboard recognize the memories, but the OS is found only 3200MB.
Motherboard MSI 945GCM5
System Start DDR2 4096MB 667 Dual-Channel
Bios version 17.8
Is there any way I can get Vista to not recognize a gigabyte of RAM? I'm having trouble with a game and I hear that to fix it you can't have more than 3 GB of RAM, and I have 2 2GB sticks of RAM and I don't want to run my system on 2GB.
View 9 Replies View RelatedI have a problem on MSN that it doesn't recognize my web cam i know it works because other programs pick up the camera.
I have tried to uninstall the driver and reinstall it but that doesn't work
I have Vista Home Premium 32 bit and just installed a new Lexmark x4650 all-in-one. I can print perfectly when it is connected wirelessly (through the printer's internal connection to the network), but it won't recognize there is a scanner on it. If I connect it via USB, it works. I have tried disabling both the firewall (McAfee and Windows) and the wireless router. I can't see to find anyone who can print but not scan over the network.
View 9 Replies View RelatedI have a friend who is having issues with windows vista 64 home edition not recognizing all four cores of processor. Here is what we have done so far: updated bios tried to change cores in system config but only giving two core option and we have four. rma first processor since 3 separate programs(windows,amd overdrive and cpuz) all showed only two cores checked all appropriate options in gigabyte bios. All components are compatible.
View 9 Replies View RelatedI just updated from XP Media Center to Vista Media Center (via Home Premium), so I'm a tad new to the Vista version. ALL I want it for is to play music, I don't want pictures, TV, (I might want movies though), etc. Is there a way to remove menu items I don't want: i.e. Pictures, etc.. Also, what types of rips will MC recognize? mpg, avi, etc. The XP version seemed only to recognize .divx files.
View 5 Replies View RelatedI am using a SanDisk 4 GB SD card on my computer correctly. Recently I bought another Lexar 4 GB SD card and my pc cannot recognize it.
View 6 Replies View RelatedI'm using Vista Ultimate with Fax and Scan. It won't recognize my Canone LIDE 30. All of my other programs that use the scanner do recognize it. I am looking for a sure thing ... a scanner that will work with Ultimate's Fax and Scan. I have heard that MS dropped TWAIN for this product and uses a different methodology.
I did have a network All In One but had nothing with problems using it with Vista. So now I'm thinking I'll just connect a scanner to the computer. I tried other software but I received a message that it couldn't access the modem because it was in use by another program ( not the case ).
I have a brand new HP laptop with running Vista Home Premium. USB devices I regularly use is my digital camera, my iPod, a bluetooth USB stick, my printer and my wireless mobile internet device. Every time I plug one of these in, I have to pray that it will be recognised. If it is a good day, and it is recognized, it does not show up in My Computer or in Windows Explorer and I cannot unplug it safely. With some of the devices, every time I plug it in, I get a pop-up which says it is updating the driver software, but it does not seem to make any difference.
View 5 Replies View Relatedi am running a vista 64 bit sp1 in 4gb 800mhz(2x2gb stick). i have a patriot RAM in 5-5-5 15 timings. it run smoothly and i have no prob. my cousn gave me another RAM. 2gb (2x1gb stick) of Corsair also 800mhz but different timings ( 4-4-4 12).
After i plug the Corsair RAM my pc boot w/ no prob. i check it if vista recognize my another 2 gb of RAM for the total of 6gb of my computer RAM. and yes welcome center recognized it.
but after a while. i play some videos and BOOM, blue screen of death appear. i didnt catch the error code. the pc reboot. but when ever i played some video, bluescreen of death appear again. do you think that different timings of RAM affect it. but both RAM have same 800mhz.
How come this happens? I will be using Windows Vista 32bit Home Premium and it simply will not recognize any DVD that I put in the DVD drive. I hit restart and the same thing happens. Then I hit shut down and let it shut down and then restart it with the power button and the DVD-RW drive and any disc in it will be read perfectly. This seems odd and disconcerting.
View 4 Replies View Relatedpc does not recognize my dvd drives,i have windows vista 32 bit,i went into help and support,which advised to go into devise manager and check to see if the dvd drives are listed which they are, then to right click on the dvd drives,properties, and click the troubleshoot tab,then the attached box pops up and i dont know where to go from there,
View 4 Replies View RelatedI purchased this drive and it was working fine until now. When I plug it into the computer it does not recognize the HDD. :sa: The problem
started after I reformmatted the CPU. I am running Vista Ultimate 32.
I have a ps3 and I wan't to connect to the internet so I bought a wirelesss router and about 3 ethernet cables (I didn't know it wasn't neccesary)I try calling verizon to help hook up my router but they say some thing was wrong with the router it wasn't lighting up. So I bought a new router and the Ethernet wasn't lighting up eather. My dsl modem isn't lighting up eather so i've proved that my pc isn't recognizing my ethernet connections... My uncle has a ps3 and he has internet so I called him and he couldn't help me because the problem is with the pc. What do I have to do? I'm freaking out i've tryed using my other ethernets and the results are the same as before!
View 4 Replies View Relatedwhat is the max amount of RAM that Vista 32 bit will recognize? I ask this because I have 3 gigs of RAM currently on my 32 bit computer and I want to go buy some more. I found a good stick for under 20 dollars that I don't mind spending on. If I make my RAM go from 3 gigs to 4 gigs, will it recognize the extra gig? I heard that it will not recognize 4 gigs but I also heard that it won't recognize anything more than 4 gigs.
View 9 Replies View Relatedthis is my very last try to fix this problem! perhaps the solution is very simple, but i have no more ideas to solve it. i just want to use my usb-storages on my system. neither my 2,5''-usbhdd nor my sandisk cruzr usbstick is accesible. vista asks me to provide special drivers from the manufacturer. but there are no special usb-flash-drive-drivers. the mainboard is a asus p5k. the 64bit-system-drivers are installed. the joke: my very old 64mb-flashdrive works fine, as well as my digicam and the memorycard in my handy.
View 5 Replies View RelatedWould anybody know why Vista X64 SP1 does not recognize my EVGA 8800 GTX graphics card, I just got my EVGA X58 MB along with an Intel core i7 920 CPU and six gigs of corsair ddr3 dominator ram, I've installed Vista X64 SP1 and everything gets recognized except for the 8800 gtx graphics card. I've tried installing the 64 bit 182.06 nvidia drivers but without vista X64 recognizing the cards in the first place it's pointless, i just keep crashing when i reboot until I go into safe mode and remove the drivers.
View 5 Replies View RelatedMy vista x64 will not recognize my ide drive. It was internal then rigged it to be external and nothing. And yes it works on other computers.
View 6 Replies View Relatedi recently got the ASUS M3A mobo with the AMD Phenom 9600 and 4 gigs of ddr2 1066 crucial ballistix ram from a friend for a steal of a deal. It has been used, but all working on a windows XP machine. He moved over to Intel and installed all of this into another box for me, and i put vista on it. However now, i am only seeing 1 cpu no matter what program i use(task manager, cpuid, pcwizard, HWMonitor) and the ram is running at ddr2-800 (pc6400).I updated the bios to beta version 0601, was running 0301(initial release).
View 6 Replies View RelatedI got a HP dv6000 and I am having a problemo! Its a newish computer. I bought it nearly new off ebay, and I put vista on it. Vista works and all but it only recognizes the dial up port. The computer has wifi and an ethernet port but it will not detect any network.
View 6 Replies View RelatedI just installed Window's Vista Ultimate 64-bit on my new build. I have 3 arddrives installed (2 150gb and 1 640 gb). My BIOS reads all 3, but when vista is booted, I only have a C: drive available (one of my 150 gb). None of my drives are in a Raid array. how to get vista to recognize the other 2 drives?
View 6 Replies View RelatedI have installed 4gb of RAM into my computer and vista doesnt recognize all of it. I know 32-bit vista only senses about 3.3 Gbs max. But my computer is only sensing 2.8 GBs. Then i checked my viedo card and Vista is sharing over 1Gb with my video card. Is there any way to fix this problem?
View 7 Replies View RelatedJust recently, I accidently ran 'rd /s /q c:'. You can imagine the chaos that insued. Anyways, I reformatted my computer. For some reason though, Vista won't recognize my router connection anymore. I have a LinksysWRT140EN router hooked up, but neither the Linksys installation CD or Vista will recognize the broadband connection.
View 8 Replies View Related
