I am using Vista and wireless E180 USB Modem connection from 3. For a long time i has been working fine, but now i cant connect to the internet. I gives me the message - command line option syntax error type command/?
View 4 Replies32 bit Windows Vista Home and I have McAfee security. This as my sons laptop and he could not get the OS to start up. I done a system restore have since been able to log in. From that point I have tried to connect to the internet with a netgear wireless router WGR614 v6. I can establish a wireless connection, but I am unable to connect to IE. When trying to do so, I get internet explorer cannont display web page.
When I try diagnose connections I get the host may be down and windows found a problem that cannot be repaired automatically. I am running a pc with xp home through the netgear router with an ethernet cable so I know the internet connection is good. I have tried to connect in safe mode. I have done an ipconfig reset and a dns flush. I disabled my windows firewall and still have no luck.
I cannot connect to my wireless network after reintsalling Vista on my notebook. I hvae an HP dv6139us notebook. I can see the newtork and I can try to connect but everytime I try to, it does not connect for an unknown reason. I have a secure network and i put the correct passphrase in as all my other computers connect with no problems. I have also dover a little deeper into this and when you look and the nwetwork and sharing center and click view full map, under the drop down menu there is an error message that states, network adapter is not enabled. How do i enbale the adatper? As I have checked this in the device manager and it shows that this is enabled. I am totally confused and lost and about to pull my hair out.
View 6 Replies View RelatedI've a new laptop with W.Vista and when I try to connect to internet through wireless an error message appear. I read that D-Link DI 514 isn't supported anymore in Vista. Its possible to fix it? To change my wireless router is my last option.
View 7 Replies View RelatedI just received my HP laptop with wireless internet, yet I cannot connect to the internet. I am using a linksys wrt54g version 2 router. I already have a number of computers already connected wirelessly to this router with no issues. I cannot figure out what I am doing wrong with this new computer. This is my first computer with Vista, so I'm a bit rusty with the set up.
View 7 Replies View RelatedThis morning I started the installation of the vista service pack one. once installed my laptop could not connect to the internet wirelessly anymore, it cannot find any networks. what's going on?
View 7 Replies View RelatedI am unable to connect to internet using my wireless. I have tried resetting the router and rebooting the laptop. Each time I try connecting to internet the system throws and error " the dependency service or group failed to start". I have tried using vista's diagonse and repair option, but no luck. I have tried restarting the wireless, troubleshooted drives. On doing the ipconfig /renew at the command prompt the following was seen. " No operation can be performed on wireless network connection while it has its media disconnected.No operation can be performed on bluetooth network connection while it has its media disconnected. An error occured while releasing interface loopback pseudo-interface1" On futher diagnoses i have notice that DHCP clinet service is stuck in the "STARTING" state. I am unable to stop and restart it. I have logged using the administrator.
View 9 Replies View RelatedI want a second computer (which uses XP) to be able to connect to my internet connection. It CAN connect to the wireless network, but cannot see the internet. I have a Netgear wireless Router, and a security enabled wireless network. The other PC can connect to the wireless network with good strength, but cannot see the internet. In Vista's Network Sharing Centrethere is a properties box which deals with Internet Connection Sharing. But when I try to tick the 'Allow other users to connect through this computer's internet connection' box and click OK, I get a messagebox come upo telling me that 'An error occured while internet connection was being enabled'. Should I be trying to enable this? Am I doing this in the right place? if so what else do I need to do to enable the internet on the other machine?
View 9 Replies View RelatedI am unable to connect to any wireless network. When diagnosing why i cant connect, i am simply told 'you are unable to connect'. additionally, when directly connecting through a cable, I still cannot use internet, however my AOL instant messenger will work fine. I have tried restarting my computer and router with no success. All settings have been set to match my home network. I am lost as to what the problem could be.
View 9 Replies View RelatedI can't get onto the internet with my laptop. Get the message IE cannot display webpage. I have diagnosed connection problems, and there aren't any. I have tried both wireless and ethernet networks. My desktop is working just fine . I have been working on this for 4 days now, and have not come up with a solution.
View 9 Replies View RelatedWhen trying to connect to the internet I have to go through a series of operations, viz, start, connect to, dial, close and then finally load net. Sometimes however, as soon as I log on, a small window appears and I can connect immediately to the net via this. Is there any way that I can adjust my system to use this small window each time I want to connect?
After getting on to the net, as I try to go from one site to another, the small window appears and I have to reconnect to the internet. This has only started recently.
I'm having trouble with my internet connection on my Sony Vaio laptop. I've had this laptop for over a year now and I've been connected to the internet wirelessly through a router without any problems until last night...All of a sudden IE wouldn't connect to any sites but firefox and my messenger still worked. Then about an hour later my firefox stopped working so i decided to restart my laptop. Before it shut down to restart I got a Blue Screen and then it restarted. Now it's saying im connected to the network but Local Only and I can't connect to any sites. I'm currently on another PC in the house and the Internet works fine. Also I tried plugging an ethernet cord in the laptop and it still doesn't work.
View 8 Replies View RelatedI have 3 computers in home: 1 is connected via Ethernet to DSL and D-Link wireless router, and is running Vista Home Premium. I can connect to Internet fine on 1.
2 is on my wireless network running XP. It connects to Internet just fine.
3 runs Vista Home Premium, but I cannot connect to the Internet. You can see the wireless network with a strong signal, but the connection is Local. If I remove WPA and make the network unsecured, I can connect to the Internet. If I plug in an Ethernet cable in this computer and into a port on the router, I can connect to the Internet. I checked ipconfig and it shows for the wireless network that there is no default gateway, and the user ID does not show like it does when I run ipconfig with the network unsecured.
Have a wireless router and cable modem on computer 2 in one bedroom. Suddenly computer 1 in another bedroom cannot connect to to internet. Worked fine until one morning. No settings were changed. Laptop has no problems connecting. Internal network device shows as working properly. Network is there - available to choose and connect to with all green bars but attempts to connect and diagnose suggest "low wireless signal quality." All recommendations have been followed to connect but nothing has worked. Computer is less than 1 year old. Is it possible that an updated driver for the wireless adapter would help? I am going to humiliate myself and ask the stupidest question ever - the same day it quit working, some very large construction equipment was parked in an empty lot next door to us. Could this interfere with any signals?
View 6 Replies View RelatedI have a few issues with Windows Mail (Vista) connections. If I'm already connected to the Internet through my ISP software Windows Mail will connect to my mail servers with no problem but if I'm not already connected it will not connect. Internet Explorer and many other programs (even several of my freeware programs) will connect to the Internet using my ISP connection when my PC is not already connected to the internet. I've tried but can't get Windows Mail to connect through my Internet connection.
I ended-up having to setup a Dial-up connection to connect Windows Mail when I'm not already connected to the Internet. It has to be set as the default connection to work but this causes other problems. For the most part it works fine but the Dial-up connection can't turn on my SpeedBand (Turbo mode) because that's embedded in my ISP software. Also, some programs use the Dial-up connection while others use the Internet connection(?)................
I have been on the phone collectively for 6 hours with AT&T as well as had a technician out here to look at this problem. I have a new wireless router box. The whole At&T system went down briefly (tvs and all). When it booted back up my computer wouldn't recognize the wireless network. After getting a new box, it will now recognize the wireless network in my home. It says I am connected to the network with excellent strength but I still cannot get online. My desktop works fine and I plugged the ethernet cable into my computer and it still won't get online being hardwired to the router. My firewalls are turned off. I have run an ipconfig with the following message:...................
View 9 Replies View RelatedI have a Dell Inspiron 6000 laptop. I am having the same issues as the people with the 3945's. What happens is that I can access local network but not internet.
View 7 Replies View RelatedI'm really frustrated with this. I have no idea whats going on. I'll be browsing and my internet will start to slowly die and then cease. and then it becomes like a car without gas. You can let that engine just turn and turn and turn but it's never going to fire. Internet Browses fine > Internet starts to run slow > Internet Stops completely > Icon on task bar still has internet globe on it > repair and diagnose resets network adapter > globe goes away and shows that the network has local access only > stays like that for hours
1. Cant access router
2. Cant access internet browser sites
3. Cant connect through 3rd party applications....
My computer is running Windows Vista Home Premium 32 bit, service pack 1. I have a DLink wireless router, model WBR-1310, hardware version B1, firmware version 2.02. The issue I have is my internet connection will randomly go away (the globe will disappear and my network will go local only). This can be while I'm in the middle of doing something online, or sometimes when I get back to the computer from being away for a few hours the connection is gone. I'll have to randomly disconnect/reconnect the connection to the router to reestablish my internet. I've disabled all sleep modes/screen savers/etc. I just want to keep this connection live 24/7. I would like to know if there is any way to fix this so that my connection becomes more stable.
View 4 Replies View Relatedi have a new laptop and i can't access internet using wireless connection. the first is a desktop with windowsxp, new one has windows vista. my router is simens. i wanted to know what is credentials and what should i write in the domain name.
View 4 Replies View RelatedI've just purchased a new PC, running Vista Home Premium, with a built- in PCI Wireless adapter, but am unable to connect to the internet. I have emailed my supplier's technical support, but I don't think the problem is straightforward, nor do I know whether it is a hardware of software issue, so I thought I'd try elsewhere in the meantime.
The symptons are as follows:
I have an old Netgear DG824M wireless router/ADSL modem. I have a laptop running Vista Home Premium. This was able to connect to the router and hence to the internet straight away with virtually no configuration - just entered the WEP key and it all worked. This has recently been upgraded to SP1, and still works okay. I have my old desktop running XP. This has no connection problems. The new PC has an Asus WL-138GE (or 138G V2 - not sure which) PCI adapter. Initially, it was identified as a Broadcom adapter. The new PC had problems right from the start connecting to the router and the internet. Most of the time, it appears to be unable to get a DHCP address. The signal strength is always excellent, and it correctly identifies the router as a Netgear DG824M. When it does manage to connect to the internet, the connection only seems to last a few seconds, or is extremely slow. I cannot connect to the router at all using the new PC. It comes up with the username and password very quickly, accepts that, but then seems to hang loading the home page. I usually give up after about 5 or 10 minutes. When connected, I can ping the router and I can also ping websites, even though I don't seem to be able to connect to them using IE. I have no antivirus running, and the only firewall software is windows firewall
I have tried the following:
Checking DHCP client service running, Disable WEP, Disable Windows Firewall, I upgraded the wireless driver by downloading one from Asus. It now recognises the adapter as an Asus 802.11g Network Adapter (driver c:windowssystem32driversBCMWL664.SyS, Broadcom 4.102.15.56), but this doesn't seem to have made any difference. I deleted the adapter and let it recreate itself. It loaded up the same drivers. I've removed IPv6 ,I've set up the PC with a static IP address (192.168.0.51), set up the router as the gateway, and my ISP's DNS servers as the DNS servers. I added an =93ArpRetryCount=94 DWORD key to the registry as recommended somewhere. I made some further registry changes as recommended by Microsoft KB 928233. I reset TCP/IP and Winsock using netsh as administrator. I tried "netsh interface tcp set global rss=3Ddisabled autotuninglevel=3Ddisabled" None of these changes seem to have made any difference, and I've run out of things to try!
I have an old cordless phone (at least I guess it is ) it's a 2.4 ghz. I just noticed when I make a call I lose wireless internet connection. has this happened 2 any1 else? ( i have made many calls and long ones at times but I just noticed it happened today and verizon said I have to get a 5.8 ghz phone.
View 6 Replies View RelatedI have VIRGIN wireless broadband with a Huwai e220 modem. It is connected to my Windows Vista Ultimate desktop PC via USB. I also have a small network comprising 1 x Linux Mandriva PC, 1 x Linux Mint PC, and an old desktop without g/card, monitor, mouse or k/board that I use to store files. My problem is that whenever I connect to the internet I lose my network. When I try to change the settings in the "network and sharing centre" i can get my network but no internet! I hav etried every possible combination of settings that i can do without being able to have both. The strange ting is that sometimes when I connect it all works for about 3 minutes then it falls over!
View 6 Replies View RelatedMy Home network setup consists of the following....
In one room. 1 x laptop running XP Home, connected to the internet via
a linksys wireless router, and modem.
In another room, I have this laptop, Acer Aspire, running Vista
Business, and has wireless.
When I connected up my router (given to me by a family member, no
software, just router, and mains adapter), and switched on my Acer
laptop in the other room, I was able to connect to my Linksys Router,
and gain access to the internet without any security whatsoever, no wep
key or anything.
Now i know most people with problems have issues with not being able to
connect to the internet because of a wep key lost or alike.
My issue is, i would like to add security to my network to stop other
people in my building gaining access, or using my connection without my
permission.
I can also connect my mobile phone to my home wireless network, and
again, no wep key is asked for, which is quite worrying.
My Advent laptop has been giving me a BSoD for some time now, the error comes up usually when browsing over the net. I have searched for the answer but have found no solution. Am not sure if this is related but recently I have switched from using a wireless connection to a wired one, the first time I have done this since I bought the machine.
View 5 Replies View RelatedI am having the worst problems connecting using a cable connection, which I need because as I am in Europe at the moment, many sites or private homes are not equipped with wireless. Now, when I connect with cable, everything seems to be working fine, the Toshiba connectivity doctor tells me I am connected, the diagnose program assures me that the problem has been resolved etc. etc. and yet whenever I try to connect (IE, Mozilla, Google, I have tried them all), I get an error screen. I have tried everything I could think of, checking my settings etc. Nothing works.
Let me emphasize that:
1) wireless connection works fine
2) it is a problem with my computer, not the host, since I have encountered
the same problem everywhere (libraries with password protected access,
private homes without password protected access etc.).
With Vista, I can get internet for my new Dell XPS laptop over the wireless connection without doing anything other than selecting the connection. No user name or password is needed. But to plug in directly into my cable modem, it does not work. Seems to require user name and password. But I use Verizon and a Motorola SB5101 modem and while it is broadband, I did not think it is pppoe. I don't even know of any user name or password for my account. Am I wrong, is all broadband pppoe? My internet connection works just fine without asking for pppoe login info when I use my desktop with Windows XP. So, it seems to Vista specific problem.
View 6 Replies View Relatedmy computer is not holding it's internet connection, even when i refresh it just wont reconnect and i end up having to restart and then the connection is fine. I'm running Vista Home Premium, Defender, ZoneAlarm (free) and Avast (free). Broadband connection. is there anyway to secure the connection permanently (which it should be) Have i, a setting wrong? At all times my internet icon says i am fully connected?
View 9 Replies View RelatedI have a wireless modem but unfortunately i m connecting with cable. because when i try to connect its just dont work I try to fix it with internet company we tried lots of ways( changing password or WPA to WEP) but at last we cant fix it they told me its something wrong with my computer BUT I used wireless al the time when i m not in home
View 9 Replies View RelatedIs there something I'm missing with Vista and wireless, I have to different wireless networks and I now have a Vista laptop in each network that I can't connect to. All firmware/drivers is up to date on the laptop and the routers and I still can't get them to connect but I have no problem with the XP. Side note, I have had both laptops connected and surfing the Web and having access to network shares and what not but they have both since been dropped. I'd be happy to just focus on one of them.
View 5 Replies View Relatedu3yy9oJHA.5468@TK2MSFTNGP04.phx.gbl> Brand new Toshiba Satellite Pro A300 laptop. Wireless switch at front is on and LED lit but cannot connect wirelessly to 3Com modem/router. Hard wiring via ethernet cable it works but very slow in comparison to XP PC's on same router. Fn + F8 indicates both Wi-fi and Bluetooth are on.Device Manager indicates a problem with Other Devices/Network Controller saying there's no drivers. Network troubleshooting tells me there's no wireless adapter.Updating drivers from Device Manager does nothing. Downloaded Vista drivers from Toshiba gives the same result. Very tempted to put it back in the box and send it back for refund, not another Toshiba, but thought I'd give the groups a try first.
View 4 Replies View Related